Зато у них Хина Вечная!!!! Хе-Хе! И в любой момент могут её увеличить хоть до уровня 4-х осей!!!! Вот!!! Похоже в ихнем Пакистане Дорожная полиция на сей новодел не так и придирается?😁
It's always amazing to watch these guys build something of this magnitude with hand tools and no safety equip. and outside in the dirt. When the guy was swinging a 6 to 8 pound sledge hammer with all his might while the other guy held the rivet setter in place with his bare hand I started sweating bullets~!! These guys are very special and should be praised highly~! 💪💪🙏🙏✌
Great 👍 job. I am totally amazed at the way you do things. Using basic tools and techniques that you have learned from your experience........BUT bhai please latest tools ko use kariye aur new technologies ko use kariye. Ok
we in the west have all the strict safety precautions making everything growingly slow and expensive up to a halt, while nobody cares about safety of the future in the field of AI, robotics and genetic research.. our civ is really fu..ng ridiculous.. these still 'natural' guys are our only hope, something remains after destroy ourselves..
Yup! Also the mushrooming of the head on the rivet set. How many get maimed when a few simple changes could make things much safer. Got to admire these guys though.
Some years ago, I toured the International Truck Factory in Ohio, and observed the manufacturing of the truck chassis. I never thought that tHis same process could be carried out in a basic workshop using basic tools. Amazing!
I drove in Russia a Freighliner truck at traveled a million miles in the US and was then sold to Russia for another 500,000 miles before being overhauled. And this one made of shit and sticks will last a maximum of 300,000. I will answer your objection with a question - Will you buy a ticket for a Boeing made in such a workshop, even if the appearance matches? Even to repair a truck frame after an accident in a normal country, you need a license.
@@VenturiLife The frame is one of the most important parts of a truck. During operation, it must withstand very serious loads. In our case, there is no assembly technology at all. In some place they could overheat during welding, in some place there was not enough strong seam. Arc welding requires great skill. The same can be said about rivets. Next - the frame has several bends, like bent, cold bending or hot, how exactly. In short - the appearance is the same, it is not known how long it will pass.
@@leonidkrinsky3365 mild steels are very tolerant to weld heat penetration, and oems use wire plasma arc or submerged arc, a quality arc rod is comparable in capable hands. those are better looking arcs weld's than I see from most pipeline welders
Hammerhart. Noch echte Handarbeit. Ohne Zeichnung. Was für eine Zusammenarbeit und was für ein Vertrauen. Der Rahmen hält doch wohl 100 Jahre und Länger. Da fällt mir weiter nichts mehr zu ein. Ausser zu sagen, mit einfachen Mitteln, Qualität zu bauen. Respekt. 👍👍
Wow ! Today young people have no idea when it comes to hard work.Just look at what these guys have to do . Lucky they have a lot of friends to lift the chassis , Well done , great work & skill ,you should be very proud of yourselves . A lot of trust with the guy swing that hammer that he didn't miss & hit the mans hand.
Man I wish I had a company I would have these guys working for me they are talented, hard working, get it done with what they have attitudes I'm very proud of those people
I worked as an engineer in the Middle East oil industry. We had a lot of these guys they were diligent and proud workers. Always would get the job done no matter what the obstructions might be.
I agree. Different standards in different parts of the world. It shows you don't need alot of fancy tools to get the job done. You can tell they know what they or doing and have done it 100 time before. No talking no planning every one knows what to do and when to do it.
A todas luces, se aprecia la calidad del excelente trabajo realizado. La sincronía con que trabajan éstas personas es admirable. Fabricar un chassis perfectamente simétrico, más sus piezas móviles, todo hecho a mano, es destacable. - Reciban un gran saludo para todo el gran equipo de operarios y el merecido reconocimiento por su labor, desde España.
I like the co- ordinated team work of these guys and their attention to detail , I must congratulate them being able to work with such a primitave conditions and equipment and resulting in an exellent product , on another note I would like to see a little more saftey precautions in the work place , these boys are really special in their own right ,they are really professional ,I hope that they are appreciated for what they do , Keep up the good work Guys .
Honest men at steel mills all professional experience skills patients with focus and a total team works, all the throughout the whole process of the project innovation 💡 😀 👍 🙌 💪 👏 💡 😀 👍 🙌
These guys are better than real engineers they have all the skills of heavy engineering they're good welders, accurate with cutting torch...they know the chassis very well what else??? I salute them!!!
Not really… if you actually go to a place like Pakistan you’ll notice a lot of their trucks crab around because of the poor geometry. Not to mention the amount that are broken down on the side of the road being worked on. Sure, these are hard working men but they’re not accurate by any means. And the materials are not necessarily top tier
Việc các bạn làm cũng giống Việt Nam những năm 1990 thật thô sơ và vất vả nhưng dù sao các bạn có tay nghề cao và chăm chỉ chúc các bạn nhanh chóng phát triển và hiện đại hóa
This crew is doing close tolerance work with essentially stone knives and wooden hammers and getting a respectable job of it. Get these guys inside in a fully equipped fab shop and watch the show
How is it that Pakistan, India, Bangladesh... won't catch up to their developed peers? It blows my mind with so much raw talent and hard work, I tip my hat to these hard working people and I hope their material conditions will reflect their mindset and hard work.
Foreign corporations do not allow. My country had its own brands of cars, motorcycles and trucks, but over the years the factories were bought by rich countries, politicians were co-opted to facilitate these purchases. There was a lot of corruption. And today my country is technologically dependent on developed countries. When an automotive or cutting-edge technology factory appears, the government does not allow it to prosper due to laws and high taxes. But we know that behind this are the fingers of the USA and Europe. My people are also very smart and skilled.
Actually cotton clothlng is far better in a place where there is a lot of heat. Synthetic fiber will melt INTO your skin and cause FAR, FAR worse burns. Without any actual flame involved.
I have been watching these kind of videos for years and the main guy is the first person I have ever seen wearing inclosed footwear but then he kicked it up a notch to boots he has BOOTS 🤯
Maravillosas condiciones de trabajo. El sueño de cualquier empresario. Sin gafas de seguridad. Sin guantes. Sin botas de seguridad. Niños revoloteando alrededor. Suelo preparado para ello. Puente grúa para mover las piezas. La seguridad eléctrica (fusibles y/o automáticos) seguro que es maravillosa. Y algunos diciendo poco menos que ellos sí que son hombres y no nosotros que lo hacemos con máquinas. Me gustaría saber la cobertura en caso de accidente laboral. Estoy seguro que a cualquiera de nosotros nos gustaría trabajar en un sitio así.
Да, не конвейер. Но в общем и целом грамотный подход и прямые руки откуда надо. Большое количество приспособлений. Где надо - сварка. Где надо- клёпка. Вероятно, что рама не копия заводской, а вариация с удлинением и некоторыми доработками. В тех местах любят большие грузовики.
рама на глаз. да ещё и с таким инструментом- это шедевр
Я удивляюсь как же они работает в тапочках
😁А чего? Вот Вы, Уважаемый, Шкаф собирали? Там то-ж по диагоналям выставляли прямоугольник! Так и тут!!!!!😁
Зато у них Хина Вечная!!!! Хе-Хе! И в любой момент могут её увеличить хоть до уровня 4-х осей!!!! Вот!!! Похоже в ихнем Пакистане Дорожная полиция на сей новодел не так и придирается?😁
@@igorartemov2554 там надежда не на дорожную полицию, а на аллаха))
Никаких средств защиты, ничего не боятся, по башке по руке получить,.. но умеют работать мужики!
Большое уважение! Настоящие труженики! Молодцы!
It's always amazing to watch these guys build something of this magnitude with hand tools and no safety equip. and outside in the dirt. When the guy was swinging a 6 to 8 pound sledge hammer with all his might while the other guy held the rivet setter in place with his bare hand I started sweating bullets~!! These guys are very special and should be praised highly~! 💪💪🙏🙏✌
Yes this is my pakistan 🇵🇰 brave and heard working people
Great 👍 job. I am totally amazed at the way you do things. Using basic tools and techniques that you have learned from your experience........BUT bhai please latest tools ko use kariye aur new technologies ko use kariye. Ok
we in the west have all the strict safety precautions making everything growingly slow and expensive up to a halt, while nobody cares about safety of the future in the field of AI, robotics and genetic research.. our civ is really fu..ng ridiculous.. these still 'natural' guys are our only hope, something remains after destroy ourselves..
I thought that was stupid
Yup! Also the mushrooming of the head on the rivet set. How many get maimed when a few simple changes could make things much safer. Got to admire these guys though.
Молодцы уважение к рабочим!
Ну класс! Компьютер отдыхает! Рукастые ребята! Уважуха!
Some years ago, I toured the International Truck Factory in Ohio, and observed the manufacturing of the truck chassis. I never thought that tHis same process could be carried out in a basic workshop using basic tools. Amazing!
I drove in Russia a Freighliner truck at traveled a million miles in the US and was then sold to Russia for another 500,000 miles before being overhauled. And this one made of shit and sticks will last a maximum of 300,000. I will answer your objection with a question - Will you buy a ticket for a Boeing made in such a workshop, even if the appearance matches? Even to repair a truck frame after an accident in a normal country, you need a license.
The truck frame itself is not particularly complicated to manufacture, it is just heavy steel components.
@@VenturiLife The frame is one of the most important parts of a truck. During operation, it must withstand very serious loads. In our case, there is no assembly technology at all. In some place they could overheat during welding, in some place there was not enough strong seam. Arc welding requires great skill. The same can be said about rivets. Next - the frame has several bends, like bent, cold bending or hot, how exactly. In short - the appearance is the same, it is not known how long it will pass.
@@VenturiLife the quality of the steel matters, if you have low quality steel, over build
@@leonidkrinsky3365 mild steels are very tolerant to weld heat penetration, and oems use wire plasma arc or submerged arc, a quality arc rod is comparable in capable hands. those are better looking arcs weld's than I see from most pipeline welders
Hammerhart. Noch echte Handarbeit. Ohne Zeichnung. Was für eine Zusammenarbeit und was für ein Vertrauen. Der Rahmen hält doch wohl 100 Jahre und Länger. Da fällt mir weiter nichts mehr zu ein. Ausser zu sagen, mit einfachen Mitteln, Qualität zu bauen. Respekt. 👍👍
Wow ! Today young people have no idea when it comes to hard work.Just look at what these guys have to do . Lucky they have a lot of friends to lift the chassis , Well done , great work & skill ,you should be very proud of yourselves . A lot of trust with the guy swing that hammer that he didn't miss & hit the mans hand.
the "young people" are much clever this this awsome murkser.
...yes and footballers who are getting paid in millions moan and groan about the wages . Madness eh .
Man I wish I had a company I would have these guys working for me they are talented, hard working, get it done with what they have attitudes I'm very proud of those people
I have been thinking about it
Yeah. They work cheap and don’t need to spend on any personal protective equipment.😬
I worked as an engineer in the Middle East oil industry. We had a lot of these guys they were diligent and proud workers. Always would get the job done no matter what the obstructions might be.
Absolutely! And the best part is they throw in the forced child labour for free!
not like Americans thats for sure.
despite their own tools, these are true professionals who know what they are doing and have a lot of respect for these people.😊😊😊😊
I agree. Different standards in different parts of the world. It shows you don't need alot of fancy tools to get the job done. You can tell they know what they or doing and have done it 100 time before. No talking no planning every one knows what to do and when to do it.
A todas luces, se aprecia la calidad del excelente trabajo realizado. La sincronía con que trabajan éstas personas es admirable. Fabricar un chassis perfectamente simétrico, más sus piezas móviles, todo hecho a mano, es destacable. - Reciban un gran saludo para todo el gran equipo de operarios y el merecido reconocimiento por su labor, desde España.
Work shop address, city
اللہ تعالی آپکے مال جان میں برکت عطا فرمائے آمین
Молодцы парни. Удачи и здоровья Вам.
손재주가 좋아요
Can watch these guys all day👌👏
Great stuff! It's like watching Fred Flintstone working for NASA.
masyaallah العمل الجيد مع الأدوات المؤقتة ، الحماس العالي يمكن صنع أي شيء ، تحية لباكستان أو أفغانستان من إندونيسيا
It’s a shame that most Americans today will never experience the contentment and satisfaction of a hard job, well done.
100% extra heavy duty beautiful work
I like the co- ordinated team work of these guys and their attention to detail , I must congratulate them being able to work with such a primitave conditions and equipment and resulting in an exellent product , on another note I would like to see a little more saftey precautions in the work place , these boys are really special in their own right ,they are really professional ,I hope that they are appreciated for what they do , Keep up the good work Guys .
Incredible! Just imagine being the guy that holds the rivet bucking tool. You'd need a lot of faith in guy swinging the sledge hammer, lol.
Honest men at steel mills all professional experience skills patients with focus and a total team works, all the throughout the whole process of the project innovation 💡 😀 👍 🙌 💪 👏 💡 😀 👍 🙌
HINO greatest site lorry/Truck ever built, wonderful hard working people.
Basic hand tools and no proper workshop defiantly get my respect guy's great job 😁😁👍👍
What is your definition of a proper workshop. My answer is “What ever it takes to get the job done”.
Hard work, careful measurement, high skill, teamwork with basic tools get you a well made truck frame!
Ils sont forts , ingénieux et professionnels , je suis admiratif de ce qu'ils font, encore bravo pour cette vidéo.
These guys are better than real engineers they have all the skills of heavy engineering they're good welders, accurate with cutting torch...they know the chassis very well what else??? I salute them!!!
Not really… if you actually go to a place like Pakistan you’ll notice a lot of their trucks crab around because of the poor geometry. Not to mention the amount that are broken down on the side of the road being worked on. Sure, these are hard working men but they’re not accurate by any means. And the materials are not necessarily top tier
Việc các bạn làm cũng giống Việt Nam những năm 1990 thật thô sơ và vất vả nhưng dù sao các bạn có tay nghề cao và chăm chỉ chúc các bạn nhanh chóng phát triển và hiện đại hóa
I found a Hino t-shirt on ebay after watching some of this stuff. Awesome work!!!
Kerja kompak luarbiasa dengan peralatan prinitif yang tidak diragukan hasilnya
Very talented people. with little professional tool they can do lot better .
This crew is doing close tolerance work with essentially stone knives and wooden hammers and getting a respectable job of it. Get these guys inside in a fully equipped fab shop and watch the show
Give them a Snap On set of tools and they would build a space ship .
Молодцы🤝✌👊
Так держать💪
Золотые руки!👏👏👏
Very impressive! No blue prints, everything from memory and experience!
They need more safety gear! Goggles, masks and stuff!
But great job!👍
Be very proud of your work. Very strong and hand made 👍🏻👍🏻👍🏻
Amazing good wark 👍👍👍🚒
These are my Pakistani brother's super talented hard working... Zindabad
Next level torch-cutting skills, and that guy has a lot of trust holding the tool while he swings with the sledge..
The handheld riveting tool was really unnecessary... i am sure they have some tongs somewhere in the shop
Con ese dinero se podia mejorar mucho la vida de la gente en la tierra, empezando por los EEUU
Que pena de dinero........
شعوب منتجة تستحق كل الثناء و التقدير ! تحياتي الخالصة .
Very good work congratulações, It Is beautful How they work só quicly
Amazing and very talented craftsmen! Salute to their excellent skills.
💙💙💙💙Ich bin echt begeistert. Einfach tolle Menschen 💙💙💙💙
Congratulations.
An gigantic , hard and Very difficult work.
But Very well done.
Труд почетный и ответстверен.
I like these hard working men. May God bless them.
Это что АВТОВАЗ? Хотя нет, слишком технологично!
Вот этот народ точно не победить никакими санкциями...
Ручной непроизводительный труд, много так не наклепаешь. Да и тот же движок сделать намного труднее чем раму.
Absolutely some of the best work I have seen !!
É impressionante o projeto não tem um desenho com as medidas tudo é feito com uma normalidade incrível. RJ Brasil
É impressionante o trabalho deles é tudo manual eles estão de parabéns pelo excelente trabalho .SP Brasil
With such amazing skills and people talented as this, how is it that the country does not have purely its own brand, line of automobiles?
How is it that Pakistan, India, Bangladesh... won't catch up to their developed peers? It blows my mind with so much raw talent and hard work, I tip my hat to these hard working people and I hope their material conditions will reflect their mindset and hard work.
Foreign corporations do not allow. My country had its own brands of cars, motorcycles and trucks, but over the years the factories were bought by rich countries, politicians were co-opted to facilitate these purchases. There was a lot of corruption. And today my country is technologically dependent on developed countries. When an automotive or cutting-edge technology factory appears, the government does not allow it to prosper due to laws and high taxes. But we know that behind this are the fingers of the USA and Europe. My people are also very smart and skilled.
Клепаный болт! Какие чудеса они выделывают!!!))))
Это самые настояшие заклепки а не болты
а у вас забитые саморезы
It is like watching the Roman's building the Big Empire or the Egyptian construction of the pyramids. God bless these guys' skills and knowledge
Прям залип. Они могут собрать машину с нуля.
Сто пудова
Parabéns pelo excelente trabalho em equipe
😊You men work in such great teamwork it's a joy to watch!!!
ในบรรดาช่างที่เราเคยดูมา พวกคุณแข็งแรงที่สุด ขออัลลอฮฺเมตตา อามีน
Respekt! Молодцы, настоящие мужчины.
Фиксики!💪👍
Cool what they can do.
Marmon trucks were hand made in Texas for years. I liked the cabovers
You all do AMAZING work. Bravo.
I like to watch channels about building tools from Parkistan.Greetings from Malaysian brothers
Definitely getting their money's worth out of those drill bits. The "sharpener/grinder" guy is much better at it than I am, that's for sure.
Yeh they were cutting nice swarf
Top já DEIXANDO like.
Esse povo ae são incrível, a inteligência deles é incomparável, incrível, parabéns....
Parabéns! Excelente.....sem palavras! Sempre assisto os vídeos! Adailton - Brasil
Fico impressionado com o profissionalismo deles
Saúde e paz pra vcs
such hard work and probably poorly paid total respect to these guys to build a chassis from scratch . 👍
Incredible hard working men. I would like to see the finished bus
I would like such guys to work in my workshop.
I was looking forward to it.
แฮนด์เมด ยอดเยี่ยมมาก ครับ ทำโครงสร้างให้เป็นตัวยูโดยตลอด จะสามารถทนแรงบิดรอบทิศได้มหาสาล
Tenho um respeito imenso por essa gente! São admiráveis! Vida longa e paz a todos! Abraços do Brasil
That is a very strong chassis and the riveting is superb. I would not like to be the one holding the former though.😁😁
เป็นการทำงานที่ใช้ฝีมือล้วนๆ แต่ไม สวมถุงมือ.และแว่นตาเลย อันตรายมาก
As the Health and Safety Officer for India, I approve of the safety sandal footwear and safety cotton clothing of the people working for this company.
Actually cotton clothlng is far better in a place where there is a lot of heat. Synthetic fiber will melt INTO your skin and cause FAR, FAR worse burns. Without any actual flame involved.
Lol
It’s not India; these workers are Pakistanis. The work safety is like that in that part of the world.
Not india
Could you donate safety shoes for my pp. Loved from pakistan
Sem comentários 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏 só um, estes caras são heróis no que fazem parabéns top 🇧🇷🇧🇷
MashaAllah amazing people and amazing processes to complete the project inshaAllah
Handmade quality.... just like a Ferrari...
ماشاالله 👍👍💪
I have been watching these kind of videos for years and the main guy is the first person I have ever seen wearing inclosed footwear but then he kicked it up a notch to boots he has BOOTS 🤯
CONGRATULATIONS FROM A FRIEND IN GREECE. BRAVO TO ALL CRAFTSMEN.. WE HAVE A LOT TO LEARN FROM YOU PEOPLE. MY REGARDS
റിയലി 🙏
Top quality workmanship... you guys work really hard ... forget all the health and safety crap that's for novices 👍👍👍
Show de bola amigo parabéns, ótimo trabalho.
It's really a great work from this people. With easy tools make they a very good chassis for a truck. Please more such videos...Thankyou so much
Son geniales trabajando.!!😀
beautiful work!! 👏👏👏👏👏👏
теперь я понял как у нас буханки собирают: тоже самое, только без рулетки
без рулетки , но с будуна
Amazing skills from hard working people ,
Я в шоке😳😳😳молодцы 👍👍👍👍👍
Они с железом на ты
Maravillosas condiciones de trabajo. El sueño de cualquier empresario.
Sin gafas de seguridad.
Sin guantes.
Sin botas de seguridad.
Niños revoloteando alrededor.
Suelo preparado para ello.
Puente grúa para mover las piezas.
La seguridad eléctrica (fusibles y/o automáticos) seguro que es maravillosa.
Y algunos diciendo poco menos que ellos sí que son hombres y no nosotros que lo hacemos con máquinas. Me gustaría saber la cobertura en caso de accidente laboral.
Estoy seguro que a cualquiera de nosotros nos gustaría trabajar en un sitio así.
Felicitaciones a todo el equipo!!!
Да, не конвейер. Но в общем и целом грамотный подход и прямые руки откуда надо. Большое количество приспособлений. Где надо - сварка. Где надо- клёпка. Вероятно, что рама не копия заводской, а вариация с удлинением и некоторыми доработками. В тех местах любят большие грузовики.
your grate bro....hard worker and wonderful skills.. grate but putting snakes is very danger.
That looks very impressive indeed.
Great teamwork
Amazing, thats a work of art.
手作有不妥之處，最好就是 機械人 操作 快而準 冇瑕疵😍😇👌
手做有不妥之處 最好就是機械人操作 快而準 冇瑕疵。按此下載
The chap holding the rivet set has got a lot of faith in the one wielding the hammer! I think that I would use a pair of tongs, or somesuch.
Теперь я знаю как сверлить без сверлильного станка!!!
а как гвоздь забить уже знаешь?
Amazing job!
Unos verdaderos maestros. Los felicito saludos desde argentina abrazo grande
Saubere Arbeit. Sehr fleißig !👍🇩🇪