Manufacturing Process of Truck Axle in Street Factory || Изготовление оси грузовика
HTML-код
- Опубликовано: 2 дек 2022
- Manufacturing Process of Truck Axle in Street Factory || Изготовление оси грузовика
#truckaxle #howtomaketruckaxle #machineshop #cuttingedge #machinist #pakistanitruck #manufacturing - Хобби
Сколько смотрю и всё не вериться что так работают эти люди. прям как киборги какие с другой планеты. Просто одуреть можно какие они молодцы.Спасибо человеку кто снимает такие видио. Просто Улётные получаются во всех отношениях.
Это обычное рабство. работая за копейки и ради копейки. в итоге эти оси продадут в сотни раз дороже.
@@user-qf1by6yk3u эти оси стоят те же копейки. Из-за говеного качества стали они изнашиваются очень быстро. Удивительно что ТВЧ-закалку ещё делали.
@@user-qf1by6yk3u там нет рабства, это артели
Нихрена себе! Станок с ЧПУ! Однозначно лайк!
И срали они на всякие санкции, девиз:- ИЗГОТОВИМ ВСЁ , что захочем и в гаражных условиях. МОЛОДЦЫ!!! И не ноют….
Outstanding! Great work. Everyone contributes. Loved they showed the heat treating process never have seen that done and always wondered. Now I know. Great video.
Да и не какие печи для термообработки не нужны. Молодцы!!! Просто решают свои вопросы….
Pure grit and skill. Something americans lack anymore.
We just order new wait and cry backorder.
Or have super exoensive fancy machines.
These men are the machine.
Outstanding.
Безотходное производство - это круто. Станки с ЧПУ - первый раз вижу в подобных видео, рад за парней. На выходе вполне годная и красивая деталь даже с покрытием.
я тоже удалён был .
Непонятно для каких целей токарный с ЧПУ был применен, чтобы проточить цилиндр??? Зачем ЧПУ? Если всё это потом дотачивалось на универсалах так же как и начиналось точиться
@@skirmish3889 да,вот тоже непонятно. И посадку под подшипник и сальник проточили на ЧПУ, а потом на универсале по штангенциркулю. И такую деталь надо бы точить не за три установки.
@@ruslantver похоже тут демонстрация оборудования (ЧПУ), иначе никак не объяснить происходящее чудодейственное это
@@skirmish3889 Как вариант, они ещё не знают на что он способен, возможно что ещё и не всю инструкцию к нему перевели.
Amazing 14 years old boy working on CNC love from New York.
Ну это писец это первой ролик которой меня удивил!
Из металлолома и конечный продукт и так еще и обработан, круто!
Видно же что это валы были там хорошая сталь скорее всего 40х или 40хна даже может быть
Не заморачиваются вопросом спецодежды и охраны труда. Но работают так, как у нас не смогут.
Excellent work. The milling arbor wants new bearings.
Suami teladan bekerja keras demi istri,anak,sehat selalu ya, Tuhan berkati Amin.
Зато не какие санкции их не каснуться из хлама получается вещь, молодцы не рушат производства как в некоторых странах.
Hello om semoga pekerjaan nya sangat bisa membuat keluarga bahagia om
Tôi thích những người thợ Pakistan làm việc rất chuyên nghiệp và hiệu quả. Chào các bạn từ Việt năm
Закалка токами высокой частоты, это прям респект)))
Exelente video, nos instrui e traz sempre lampejos de novas ideias para outras atividades. Muito obrigado.
Good job 👍
*very cool video. as always! Like from me* эээ👍🏽
❤️
Amazing work
Forging makes and the induction hardening steel process stronger. Hard and dangerous job, congratulations 👌.
Great work 💪
Молодцы. Трудяги.
Wow like
12:29 Este operador de torno, este joven tiene un valor enorme. En un gran trabajador, enhorabuena.
Amazing sir
¿Enhorabuena? Señor S.F.N., usted lo que debió notar, antes que el producto fabricado, serían la Súper Sandalias con protector de acero para los dedos que usan estos trabajadores. ¿Cómo? ¿No los notó? Luego de eso, ¿se dio cuenta de la ropa ignífuga que utilizaban? Los guantes de carnaza; los cascos; las caretas de resistencia térmica; los lentes de seguridad; las fajas, las rodilleras de kevlar, la mascarilla o siquiera un respirador desechable 3M 9502 industrial para humos tóxicos y partícula incandescentes, etc. Esta pobre gente no tiene Nada, señor S.F.N. Cero. ¡Ni siquiera un triste peto de cuero para 500 grados! Si acaso mi delegada sindical ve este ABUSO, corre y les endereza una demanda laboral que les cierra la fábrica por año y medio.
Wow good thx^^
Well done , Made in Pakistan. Stay Blessed.
ЧПУ,ТВЧ, относительно чистенько 😀 обувка !
Верной дорогой идёте товарищи!
Это сейчас все ржут над ними, скоро будет мастерская мира, с таким то настроем
@@gbnthcrbq1924 Никогда такого не будет. Всё что вы видите на видео было и 10 и 20 лет назад. Прогресса ноль.
@@user-qg3wr7lg4j только вот мы и дальше будем заказывать в Китае, а они будут изготавливать сами
Качество полное говно!
Они делают, китайцы продают.
that cnc caught me off guard :D
perfect workers, prima !! gratulation chief for those men !!!!😮😮😊😊😊😊😊
The good work 👍
Amazing❤
Pakistani katir number 1.
Jeans? Boots? Gloves? What’s next? Ear and eye protection?
What about kids operating heavy machinery in sandals?
i love this channel becuase it shows that the possibilities of procezessing in an easy way from a to b to a Produkt that is so good that i is funktionally now and tomorrow
Hard work god bless u bro
سلام کارتون عالی بود خسته نباشید
Thank for sharing.
Пожалуй в таких видео ЧПУ такие же редкие гости, как штангельциркуль и микрометр.
штанген и мкметр там у них регулярно, не надо думать что там совсем кустарники, а вот ЧПУ впервые вижу
Наши люди! Наше уважение к ним безгранично! Этот народ не победить!
Наши люди? Не оскорбляй тружеников. Они на коленки делают вещи. А мы, свои заводы разграбили и пропили.Великие!?
@@user-yh2vu2ir1p Попросил бы не обобщать! Мы свои заводы сохранили. А как вы не знаю
It's brilliant! Regardless the race, God has given His wisdom in an unselective way.
Impressive looking quality out of Pakistan
Well this is a serious evolutional step in quality and equipment. CNC, surface hardening. Only volume heat treatment and final grinding steps are amiss. But nevertheless, compared to dreadful earlier ones it's a big leap. Keep up the good work.
Having worked on differentials, this is very interesting to see how these parts can be created from raw materials, much time and thought has gone into the knowledge & creation of machinery over long periods of time, I hope more people appreciate how much our standard of living is based on this and don’t lose the knowledge.
Machinery ends poverty and slavery in the long run!
very important. My father has a small workshop producing even in these days hand forged woodcarving tools on the european market (m-stein). Its a years of perfecting processes, manufacturing own machinery from basically from scrap, using machines from 50s z 60s... its a low volume, so machinery is necessary but not automated as it is not feasible, anyway anding with products which are rather small sculptures than tools.
Slavery and poverty are man made..
A hungey man is a hard working man.
Under capitalism, machines will only take away work.
yes facinating what mere mortals can do with a bit of inginuity & skill
Они диаграмму железо - цементит учат в детском суду.
Very good bro 🌹
Это пожалуй тот редкий случай, когда на таком полукустарном производстве может получится более качественная продукция, чем на заводе.
Хотя, после того, как я увидел станок с ЧПУ - пожалуй сменю свое мнение.
Наконец то - мы видим заводское производство.
судя по выводам можно корабль в космос запустить, а тебя дурака пилотом
Ìiiiìo8⁹iÙìi⁸
To n
Качество полное говно!
ماشاءالله ماشاءالله ماشاءالله ❤❤❤❤❤🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰
Excelentes
Outstanding! Great work.++++++++++++++++++++++++++++++
Que legal, nós aqui do Brazil não perdemos nem um video seu,estamos ligadinhos aqui, um abraço direto do Brasil a todos vocesdo outro lado do mundo🤝🇧🇷
#lsreparos
I wasn't expecting the CNC.
quite impressive
Good👍👍👍
Muito bom.
Thank you
جزاک اللہ
Great job. After watching many videos from this series, this is the first (the most modern) using CNC and RF for heat treating. Very nice job.
what the fuck are you saying?!?!?!? They have no protection, they work without gloves with slippers, without protective glasses, without a helmet and without a mask..... how much do you think their average life is ??? shall we also add child labour ?
That's a pretty high-tech factory compared to others I've seen in these videos. This one actually has a CNC lathe and computer-controlled machine to cut the splines on the shaft.
Not to mention an induction heater.
@@andymachala999 I was looking at that thing and wondering how much electricity it must take. Usually that kind of power is not available in these "street factories" either.
@@mortanicus5871 In some of previous videos they were using induction-heating ovens for melting steel, that's the source of high-frequency noise. And these ovens consume much more power compared to this rather small heater.
Masha Allah
ТБ шнику нашему покажу, что бы его удар хватил))))
Я не удивлюсь если мамонта увижу!
Verdadeiros artistas do metal.
nice working
Assisto muito esses vídeos,porém em termo de segurança é zero,segurança em primeiro lugar,as vezes confiamos que nunca irá acontecer acidentes por conta da habilidade e experiência,só que acidente não avisa quando vai acontecer!
BHP marne ale maszyny mają numeryczne, więc nie jest tak źle ;)
Wow, thank you all for sharing 🙏
Me encanta el trabajo manual de su país , entiendo algunas cosas , se que puede ser un eje creo yo 🤔. Qué posibilidades hay de una fotografías de donde va a quedar ? . Me gusta aprender . Felicitaciones por sus trabajos y que todo les salga bien . Que pena .
¿Cómo? ¿Le encanta esta clase de trabajo? Señorita Caicedo, usted lo que debió notar, antes que el producto fabricado, serían la Súper Sandalias con protector de acero para los dedos que usan estos trabajadores. ¿Cómo? ¿No los notó? Luego de eso, ¿se dio cuenta de la ropa ignífuga que utilizaban? Los guantes de carnaza; los cascos; las caretas de resistencia térmica; los lentes de seguridad; las fajas, las rodilleras de kevlar, la mascarilla o siquiera un respirador desechable 3M 9502 industrial para humos tóxicos y partícula incandescentes, etc. Esta pobre gente no tenía Nada, señor Mauricio. Cero. ¡Ni siquiera un triste peto de cuero para 500 grados! Si acaso mi delegada sindical ve este ABUSO, corre y les endereza una demanda laboral que les cierra la fábrica por año y medio. Parecen esclavos de la Revolución Industrial del Siglo XIX.
Profi!!!
Так работают терминаторы!))).
Skill
Этих ребят надо на АВТОваз.
Hmm safety? what safety. And the kid working there too.
Just like that.
Whats the last treatment called
В Пакистане делают все что угодно кроме средств индивидуальной защиты 🙃🙃🙃
Bhai aap kahan se ho
Whay motorcycle wheel axle strong four wheel vehicles motorcycle axle slim smart comparison human hand finger very higher load after not fold bend some fat axle no bend fold direct stuck damage higher load
hi ❤❤+1like❤❤❤
die haben ja richtige schuhe an nicht nur sandalen!
Can someone explain what the last part of creation was ? And for what purpose ? Thank you
It hardens the metal to heat and cool it. Thing a blacksmith dunking metal in water.
У людей есть станки с чпу, дешевенькие, но есть, в первый раз вижу... А технология с индуктивной закалкой меня удивила, не проще ли было при ковке кинуть деталь в масло, а не остужать на свежем воздухе?
👍👍👍
Has anyone figured out why everything made in one of these vids has to be thrown on the ground every step along the way?
First time seeing CNC in one of these shops, and even looks like the have a set of calipers instead of using a ruler
The pieces are too heavy to be chucked into the sky.
Its a low tech but effective way of checking the part for stress cracks and a bit of stress relief for the workers. Sounds like im joking but after 38 years in machine shop I tell you both are true. I have seen a machinist running a cnc lathe where the cast sleeves he was supposed to be machining kept cracking during machining and busting and flying apart at 750 rpm. So he started throwing each part on the concrete floor before he put it in the chuck. Any that didnt sound right he set aside. No more busted parts. When the boss ask him about the pile of discards he started throwing them on the floor in a mild rage and sure enough they busted open. These were cast iron sleeves about 10 inches long about 4 inch diameter with about a half inch wall thickness. Just bad castings. He took a dangerous job and made it a good laugh for everybody.
🧐🤖👌👍
Beau travail , mais des travailleurs un peu trop jeunes !
Nice Vajayo but @ 12:36 the kid leaves chuck Key in the Chuck, that would get you thrown out of any shop I ever stepped foot in just saying.....
Эти люди,изготавливают кованые полуоси!!!😮Не то,что на наши нивы и уазики делают😢
Yang mau
Don’t knock their production. One has to do the best they can with what is available.
Wow, they got some pretty neat machines in this shop - a CNC lathe, that badass heat treater and even a neat old Cincinnati indexing cutter with a wore out bearing on the cutter shaft end....and there's Dikshit, over in the corner, drilling lug stud holes with a homemade drill guide that looks like it came out of the scrap pile.
You can make an induction heater like that from a microwave.
12:53 1.Кондуктор сверлильный без втулок кондукторных. 2. Контроль диаметра отверстий одним калибром. 3. Контроль взаимного расположения отверстий отсутствует.
Лови ОТКашника
is that Freddy Mercury?
15:32 Can anyone tell me what this process is called and or what is it accomplishing?
I want to guess it might have something to do with hardening the axel to make it stronger but I’m not 100% sure.
This is called "quenching".
As you know, steel is hardened once it is heated and rapidly cooled.
However, it's also first for me to see such induction heating and water cooling combination machine.
@@tnkj1974 Surface hardening is a common technique for shafts production. It makes the shaft's surface very hard, even brittle, and so able to pass great momentum. Which creates stresses mostly on the surface, not the inner parts of the shaft. Hence existence of pipe-made shafts.
Holy shit, an actual cnc lathe?
Zero Equipamentos de protecao
Heat treating at last, but drilling holes are not doing
precisely enough.
The wheel doesn't center on the lug nuts so it doesn't need as much precision.
Yah company kahan bhai mujhe Na yah kam sikhana bhai
A CNC?!?.....What no hand turned lathe?
Yah company kaun si jagah mein hai bhai mujhe Na is company mein kaam karna hai bhai
👏👏👏🇧🇷
Работать газорезом, сидя на корточках, на трубе - это просто пиздец.
Forged at street, CNC inside.