I like your content I have seen 2 videos of you alteady and i love how you restore dirt bikes Im following you now and keep your good work up Your work is so amazing
Perfect KLX 110 build, that is probably the sickest KLX 110 I have ever seen. If I had the money and time to build a KLX 110, I would absolutely build it pretty much exactly how you built yours
cleaaaaaaaaan bike, keeping up with the series on all your builds..You should definitely do a ATV, a blaster specifically because I want to see how you would do that over
I have a very clapped out 110 😂 its a 2005 i thing it runs but the bog is bad somitimes but i love it i flipped it has no brakes has bad bad grips but its a ripper fav dirt bike also i used to have a 1995 kx 125 i still have it but when i kick it over it locks up a lot and has a screech when i cycle it if you know let me know pls the dirt bike is on my profile its a fast dirt bike it has to take like 20 kicks bc it has been siting for over 2 months bc no gas noone to ride it but not for sale very special bike to me but i love your vids keep it up bro your becoming a legend you always have been
I LOVE how the bike came out and I was wondering if you will have your Tracks Trails and Good times shirt will be in stock for large before the end of the giveaway?
I finally decided it’s time for a bigger bike. Found a couple of 2stroke ktm 250’s I’m after, hopefully my yz125 sells so I can snag one of those bad boys up!
Hey bro, love your channel and content but public service announcement… at least from my experience, I ordered the 340 jumbo (biggest kit offered) from fast metric (edit: because of your channel) for my 2000 Honda CR250R and of the maybe 60-80 bolts I took off (all plastics, even things like chain guides, brake guards, etc), swing arm, sub frame, reed valve, the list goes on, I was able to find about 10-12 bolts in the entire 340 piece kit (including washers) that worked as a replacement. Idk what all these bolts/nuts/washers go to in this kit (didn’t do any engine work) but I really felt I got a bit scammed on my $60 bucks (shipped), I ended up spending the money on OEM bolts and stuff for about 30 bucks and was hoping the biggest kit they offered had me covered and I was highly disappointed. Overall, it has really soured me on all bolt kits to be honest.
Hey man, I use their jumbo kits as general replacement hardware. While they do include some bike specific bolts - rotors, sprockets, etc. - the real specific stuff like engine hardware and plastic fasteners they offer specific kits for. The jumbo kits aren't intended to replace every bolt on the bike, but rather provide a stockpile of extra hardware. If you look through the website, you'll see just about everything you mentioned they offer specifically; maybe they could make it a little more clear what the jumbo kits *don't* include, but I think had you purchased the appropriate specialty kits you'd have been thrilled.
damn dude awesome build man i love your content i wish i could do stuff like you but i dont have the money sadly :( im so poor i couldnt even buy a simple bicycle
Dig the videos but mite want to skip the sink parts not sure you want to advertise where all those cleaners and degreasers are draining too keep it up been binge watching as I am thinking of getting into something like ur doing!
Please god let me be the winner because I want to start bikes as my hobby again but I want to include the whole family, but unfortunately, I can’t afford two bikes for my son 14 wheeler for my fiancé and a dirtbike for myself so I would really appreciate it if I can be the lucky winner
I can't understand why everyone wants these bikes when they make much better pitbike setups? Also how the hell does someone spend 6,000$ on a klx110? Unbelievably moronic! But ok its your money! 😂
Thank you all for watching - it's your last chance to enter to win this little ripper! kincadepavich.com/item/klx-110-entries/
fuck yea! I love breathing new life into used bikes, already saved hundreds from their way to the junkyard 👊✊
Discover this Chanel a few days a go, this is super chill to watch !
Awesome turn out. My only suggestion would have been to have the seat cover in purple instead of white. Other than that, it looks fantastic.
I personally would have went black with purple ribs on the seat myself, either way I agree it’s a killer pit bike
I like your content
I have seen 2 videos of you alteady and i love how you restore dirt bikes
Im following you now and keep your good work up
Your work is so amazing
Awesome build!! So great to see a clapped out bike restored to much better than new. Everyone should moto in an Hawaiian shirt!!
Great build would love to see a Kx500 or Cr500 build next
this dude is living the life, dude won at life
but much love all the way from South Africa
Perfect KLX 110 build, that is probably the sickest KLX 110 I have ever seen.
If I had the money and time to build a KLX 110, I would absolutely build it pretty much exactly how you built yours
That Exhaust Is 🔥
cleaaaaaaaaan bike, keeping up with the series on all your builds..You should definitely do a ATV, a blaster specifically because I want to see how you would do that over
16:42 use paint remover for your future builds its works faster
I've never really had much interest in pit bikes, but after watching your build I find myself checking them out when I see one. Thanks Kincade 😂
full size mx is dead pit/mini bikes are where its at these days
I have a very clapped out 110 😂 its a 2005 i thing it runs but the bog is bad somitimes but i love it i flipped it has no brakes has bad bad grips but its a ripper fav dirt bike also i used to have a 1995 kx 125 i still have it but when i kick it over it locks up a lot and has a screech when i cycle it if you know let me know pls the dirt bike is on my profile its a fast dirt bike it has to take like 20 kicks bc it has been siting for over 2 months bc no gas noone to ride it but not for sale very special bike to me but i love your vids keep it up bro your becoming a legend you always have been
Punctuation was invented in the 7th century
I am trying to rebuild my kx85 and was just wondering how to organize all my parts?
600 bucks is a steal for any pit bike right now. I just bought a 2009 klx 110 for 1000 bucks and it felt like a steal from what I was seeing.
Great job! I love the look and the way the colors are! What a crazy transformation tho🔥 I wish I had a bike like that
Probably my favorite build you’ve done lol
Great build! Maybe on smaller motors it doesn't really matter but I've always replaced head studs on a rebuild.
I LOVE how the bike came out and I was wondering if you will have your Tracks Trails and Good times shirt will be in stock for large before the end of the giveaway?
That’s the best build ever
Damn that’s awesome!! Maybe sometime soon I’ll be able to afford to get entered into a giveaway cause all of your bikes are amazing!
This build turned out so sick. T-MINUS 7 DAYS EVERYONE! 🎉
I love watching these videos!!!!
Love the build man working on a rm250 1993 rn hopefully can make it look great
What tank is it the stock one or did you have to buy a new tank?
I finally decided it’s time for a bigger bike. Found a couple of 2stroke ktm 250’s I’m after, hopefully my yz125 sells so I can snag one of those bad boys up!
If you’re in Florida, I’m interested in buying ur yz
@@spencertaylor5836 man I’m on the other side of the country lol. Washington state
how do you know how to put everything back together aswell as timing for the valves?
What type of camera are you using to make these videos and the editibg software? Looks really good quality
Kincade pavich I love you man
Good looking build. Congrats
Where do you get service manuals?
lol that standing on the desk to push the spring..... 😬 I kept expecting some outtakes of Springs getting LAUNCHED
where did u buy the 2022 gas tank?
What is better powder coat or sarah coat
Rad as always
also a easy method for putting in studs is a capnut with a ball from a ball bearing in it you can also torque ist down then you should try it
That pro circuit exchaust is way quieter compared too the bbr d3 exhaust thats on my brothers tb 143cc klx110
I can't belive!!!
I like what you did to the bike. I have one just like that but different plastics
Fantastic man i want to do it my self
You should try to rebuild a crf150rb
Whats a sera coat you mean a powder coat?
No, Cerakote. It’s a ceramic coating that is thinner than powder and very durable
Hey bro, love your channel and content but public service announcement… at least from my experience, I ordered the 340 jumbo (biggest kit offered) from fast metric (edit: because of your channel) for my 2000 Honda CR250R and of the maybe 60-80 bolts I took off (all plastics, even things like chain guides, brake guards, etc), swing arm, sub frame, reed valve, the list goes on, I was able to find about 10-12 bolts in the entire 340 piece kit (including washers) that worked as a replacement. Idk what all these bolts/nuts/washers go to in this kit (didn’t do any engine work) but I really felt I got a bit scammed on my $60 bucks (shipped), I ended up spending the money on OEM bolts and stuff for about 30 bucks and was hoping the biggest kit they offered had me covered and I was highly disappointed. Overall, it has really soured me on all bolt kits to be honest.
Hey man, I use their jumbo kits as general replacement hardware. While they do include some bike specific bolts - rotors, sprockets, etc. - the real specific stuff like engine hardware and plastic fasteners they offer specific kits for. The jumbo kits aren't intended to replace every bolt on the bike, but rather provide a stockpile of extra hardware. If you look through the website, you'll see just about everything you mentioned they offer specifically; maybe they could make it a little more clear what the jumbo kits *don't* include, but I think had you purchased the appropriate specialty kits you'd have been thrilled.
Dam, so clean 🤤
great job kincade
Kincade i want to get into bike flipping but i dont know where to start can you help?
Start somewhere! Research your local market, find a good deal, and go from there!
Nice you should build a four wheeler like a banshee or a blaster
Would love to have rocking a TC85 right now
I just came across your vids keep it up you make some nice bikes
What size wheels
I am entered into the giveaway thank you for doing the giveaway
dope video bro that bike is a dream build. I gotta say though grip glue is horrible
Kincade the mermaid
damn dude awesome build man i love your content i wish i could do stuff like you but i dont have the money sadly :( im so poor i couldnt even buy a simple bicycle
Dig the videos but mite want to skip the sink parts not sure you want to advertise where all those cleaners and degreasers are draining too keep it up been binge watching as I am thinking of getting into something like ur doing!
Such an amazing rebuild! 🏍 Loved watching the transformation! We sent you an email, take a look.
first. Good build!
You were the only one to comment in the 10 minutes it’s been up lol
12:48 : drools (I don’t have a dirt bike and never have)
I wish my bike was that simple
My little brother needs this bike How do I win it?
You can get entered right here! kincadepavich.com/item/klx-110-entries/
Would have looked awesome as a supermoto!
Not that it doesn't look awesome as it is!
Dawmm clean
I think that you could've upgraded the brakes too.
Anyway nice build
I live in Laurel Montana
you should just buy 190 daytona motor :)
Nice build dude. That’s worth six grand and mines worth 10 grand.
bro cooked
I want this thing
Garcia Melissa Lewis Eric Garcia Michael
Hi I love 110
I SEE MY DREAM 🥲🥲
I would love to win it
I love ur video's
I Ned that please❤
Bro I want that
o
Can I Hava it for free please❤
me bro
This thing looks so sexy ❤
No offense I don’t think that pit bike is worth $6,000 and also why did you paint the carb 🤦♂️ that’s messed up
Please god let me be the winner because I want to start bikes as my hobby again but I want to include the whole family, but unfortunately, I can’t afford two bikes for my son 14 wheeler for my fiancé and a dirtbike for myself so I would really appreciate it if I can be the lucky winner
The competition closed 😂😂😂
@@manute_bol2759bro is begging hat in hand & all 😂
Can i have it for free
please
i need a first bike been very interested in starting for years never was aloud to buy one but this would be perfect
I just wanted to see how satisfying this fit was 18:36
Im in canada does that mean if i will he will still ship it to me?
Yessir!
@@KincadePavich okay thanks man I’m a fan of your channel so hopefully I win that awesome pit bike
I can't understand why everyone wants these bikes when they make much better pitbike setups? Also how the hell does someone spend 6,000$ on a klx110? Unbelievably moronic! But ok its your money! 😂
@@allenstayduhar7139 oh Allen 🤦🏻♂️