As a technician and audio system lover, I was prepared to write every bad thing in a long paragraph. but because I saw the name of this channel I deleted everything... Nice woodworking mate!
As a custom built piece of furniture, outstanding job. As a device for audio reproduction? Mistakes are a vital part of learning. So your next endevor will certainly employ some of the things you leanred from this creation.
Awesome Job!! Great Craftsmanship! Excellent Detailed Video. I Liked The Recycled Pallet Wood. 👍👌👏👏 I Would Of Used Some Foam in The Speaker Box and Applied Caulking Inside Joints. Other Than That Loved Your Project! ❤💡👏👏
Well, the box isn't damped either, and I don't see a crossover for the speakers, and there isn't even a rubber under the bass and it isn't even hermetically sealed... It's nice, but NOT GOOD !!!
Exquisite, I love it when you build things with pallet wood!! It looks amazing, the craftsmanship from what I can see is awesome. Are you going to make a cd/dvd case from pallet wood to match? ❤😊❤, Dona USA
Bien construido pero mal diseñado, los drivers deben ir arriba apuntando hacia el frente y no escondido. La parte trasera no esta completamente hermética.. pero se ve bonito!
Wood is fine. Most of your high end sub enclosures and pa speakers are made of wood. Mdf is also fine it's all about wood density.. as for the tube it doesn't need it for the application all it would do I make the bass sloppy. Having it enclosed will keep it tight and neat.. those tweeters need to be moved though. Sound damping the box will force the sound forward
Задумка неплохая, реализация фуфло. Зачем твитеры с боков? Вы бы их еще сзади приделали или в низ😂 Нужно спереди, либо широкополосные динамики использовать. А это баловство, только радио включать для фонового звука Проклеивают корпус перед сборкой , а не на гвозди колотят
Good job, considering the starting timber. You didn't spray underneath the cabinet during the video, perhaps you did it later. And you should give the inside/underneath the same number of coats as the outside/top. This lessens the chance of uneven moisture absorption with atmospheric change. If it's always going to be in air-conditioned premises, less consideration of this is needed..
I guess for something that is intended to be cheap it's ok. The things that triggered me: 1. Splotchy runny application of the poly. 2. Pencil marks not sanded away. 3. No speaker batt installed. 4. No vent hole in the speaker to improve bass range. 5. (I may be mistaken on this one) It looked like the speakers were wired in opposition, which will seriously affect quality of sound. 6. The back isn't removable, you nailed it in. 7. No ventilation to allow the heat from the amp to escape. 8. The power cord was wired in, and isn't detachable. 9. Antenna connection should have been externalized out the back.. 10. No externalized rear facing inputs/outputs, all connections are front facing. 11. Even after the poly, the damn thing was a splinter factory, should have spent time filling holes, and more time planning cuts to avoid any forward, top, or side surfaces from having chewed up wood (I'm ok with back and bottom sides being ignored, I won't normally be putting my hands, brushing up against those particular sides). 13. The construction of the non-removable panel guarantees rattle at certain frequencies.
Muy buen trabajo, pero se podría mejorar, los cables podrían haber sido más largos y estar recogidos , pegados al fondo del mueble y haber hecho que se pudiera habrir el fondo para cualquier reparación.
You can see that he doesn't understand the construction of sound boxes, and those boxes are small, and he could have put the tweeters in the front corners, up left and right...
Nice idea, but as said before tweeters at the sides are a poor design, and also the large woofers would benefit from being ported in their enclosures, forward facing, or rear to the wall, otherwise it looks very nice
Столько труда , чтобы в итоге это не звучало как надо , это конечно дорогого стоит ! А звучать эта конструкция точно не будет ! Понимания ,что такое акустика у парня нет ,от слова совсем . Все неправильно от А до Я ! Лайк за труды его !
Что бы не городить.такую Тумбу можно к колонкам такую же коробку касетник тюнер усилок сверху вертушку слава богу додумались делать их плоскими ну об двди как то отпало само собой хотя как то коль все так все..удачи всем думаю многие думали но вот современные производители мебели как то хотя новая мебель не знаю чья она Томская что-ли позволяет втулить все это .
All the westerners and their big brains. It's as if this man is selling the stand to them. Why don't you people build your own speakers stands on your own RUclips channel and make a 2 hour video where you yap yap yap about all the specs and this n that. Some people just enjoy watching someone do something they love, no need to be institutionalized about a simple DIY non commercial. Go and make noise to car manufacturers who don't bother at all with technicalities when installing a system that costs a third of the car, having speakers resting directly on aluminum panels with no sound deadening or anything like that.
As a technician and audio system lover, I was prepared to write every bad thing in a long paragraph. but because I saw the name of this channel I deleted everything... Nice woodworking mate!
Прикольно, напоминает приемники из Союза.Молодец!!!
You're incredibly resilient and strong.
As a custom built piece of furniture, outstanding job.
As a device for audio reproduction?
Mistakes are a vital part of learning.
So your next endevor will certainly employ some of the things you leanred from this creation.
С точки зрения построения акустики сделано не верно, с точки зрения красоты да респект за работу.
с любой точки это полная шляпа)
답글을
Excelent Job...Congratulations.😊
Mantap saya salut dan kagum kreatif anda
Terima kasih sudah berbagi ilmunya 👍👍👍👍 semoga sukses selalu. Di tunggu kehadirannya kak
Greetings from Mexico.
AWESOME PROJECT!!
Sensacional meu amigo, belo trabalho, vai Corinthians
Só esqueceu de deixa um buraco pra saída do som de dentro da caixa 🙆🏻♂️
Bravissimo
Awesome Job!! Great Craftsmanship! Excellent Detailed Video. I Liked The Recycled Pallet Wood. 👍👌👏👏 I Would Of Used Some Foam in The Speaker Box and Applied Caulking Inside Joints. Other Than That Loved Your Project! ❤💡👏👏
haha good style! great !
Very best results and I am very proud of your work,
Always success for hard workers like you,👍
Espetacular o seu trabalho muito bom nota 1.000
Although there is many mistakes .. but generally it is a very good job ... thanks
Mantap bro..,👍👍👍
Well, the box isn't damped either, and I don't see a crossover for the speakers, and there isn't even a rubber under the bass and it isn't even hermetically sealed... It's nice, but NOT GOOD !!!
It's nice, but NOT GOOD
Yup, I've been thinking about the most appropriate sentence and you've said it.
Treble ko để phía trước mà để bên hong 😂😂😂
Insonorizante dentro!!!
Bagus. Pingin.❤
Хорошее паралитическое оружие против злых соседей создал! Спасибо за видео. Мой лайк!
Exquisite, I love it when you build things with pallet wood!! It looks amazing, the craftsmanship from what I can see is awesome. Are you going to make a cd/dvd case from pallet wood to match? ❤😊❤, Dona USA
Parabéns show muito criativo. Brasil
Bien construido pero mal diseñado, los drivers deben ir arriba apuntando hacia el frente y no escondido. La parte trasera no esta completamente hermética.. pero se ve bonito!
Como carpintero eres genial ,pero como electronico de sonido , mmmmm, te falta mucho..saludos..😊
And it should have been made of mediapan, not wood, and I think the bass reflex tube for such a bass is also missing...
Wood is fine. Most of your high end sub enclosures and pa speakers are made of wood. Mdf is also fine it's all about wood density.. as for the tube it doesn't need it for the application all it would do I make the bass sloppy. Having it enclosed will keep it tight and neat.. those tweeters need to be moved though. Sound damping the box will force the sound forward
love it 👍👍
Salam knal
Dari palembang 🙏🏾🙏🏾
It is a very bad idea to point the tweeters to the side.
Good job🤝👍
nice!!! height width and length pls
Задумка неплохая, реализация фуфло. Зачем твитеры с боков? Вы бы их еще сзади приделали или в низ😂
Нужно спереди, либо широкополосные динамики использовать. А это баловство, только радио включать для фонового звука
Проклеивают корпус перед сборкой , а не на гвозди колотят
Минусы всем очевидны, но фишка в том, что можно сделать симпотную весчь из старых поддонов за пару часов не отходя от дома..
а еще вы забыли напомнить , что давно придуманы фазоинверторы, очень полезная "дырка" в аудио ящиках.....
@@Алексей-м7ц2л
А ещё забыли вспомнить "музыкальную ель" как обязательный атрибут акустики...
Человек явно не в ладах со звуком, но за работу с деревом однозначный лайк
@@akhromov63
У него цель не hi end, a дизайн и он её достиг...
Good job, considering the starting timber. You didn't spray underneath the cabinet during the video, perhaps you did it later. And you should give the inside/underneath the same number of coats as the outside/top. This lessens the chance of uneven moisture absorption with atmospheric change. If it's always going to be in air-conditioned premises, less consideration of this is needed..
Quá.đỉnh
I guess for something that is intended to be cheap it's ok.
The things that triggered me:
1. Splotchy runny application of the poly.
2. Pencil marks not sanded away.
3. No speaker batt installed.
4. No vent hole in the speaker to improve bass range.
5. (I may be mistaken on this one) It looked like the speakers were wired in opposition, which will seriously affect quality of sound.
6. The back isn't removable, you nailed it in.
7. No ventilation to allow the heat from the amp to escape.
8. The power cord was wired in, and isn't detachable.
9. Antenna connection should have been externalized out the back..
10. No externalized rear facing inputs/outputs, all connections are front facing.
11. Even after the poly, the damn thing was a splinter factory, should have spent time filling holes, and more time planning cuts to avoid any forward, top, or side surfaces from having chewed up wood (I'm ok with back and bottom sides being ignored, I won't normally be putting my hands, brushing up against those particular sides).
13. The construction of the non-removable panel guarantees rattle at certain frequencies.
Hai sir 🎉🎉🎉🎉
Если бы я так щиты склеиват, то такую подзатрещину бы от отца получил😂
how this fella still has is all his fingers is beyond me
No lo ví utilizar cautín para soldar... ésos cables así, se pueden recalentar 🥴🥴🥴👍👍... bonito el trabajo en madera.. pero la electrónica no sé vió
Quá.đẹp
nice
Muy buen trabajo, pero se podría mejorar, los cables podrían haber sido más largos y estar recogidos , pegados al fondo del mueble y haber hecho que se pudiera habrir el fondo para cualquier reparación.
It is a bad idea to install the tweeters on the sides, it can never sound good. The sound box is also out of proportion to the woofers.
❤😮😮❤
You can see that he doesn't understand the construction of sound boxes, and those boxes are small, and he could have put the tweeters in the front corners, up left and right...
cadevocemenina
👏👏👏
joli meuble super bravo
Vous ne donnez pas les mesures exactes mais c'est très intéressant beau travail
No networking, no soundproofing?
3f0f300003000300000000v
Nice idea, but as said before tweeters at the sides are a poor design, and also the large woofers would benefit from being ported in their enclosures, forward facing, or rear to the wall, otherwise it looks very nice
Красиво, но к звуку ни какого отношения эта тумбочка не имеет
Я бы сказал чисто дачный вариант на второй этаж бани поставить норм
@@dedinside9 язык не поворачивается этот набор палок назвать красиво )))
@@Kosenko_Yaroslav ты видел как он провода внутри распихал)))) куда красивше то!
Tôi đã sem từ đầu đến cuối những có hai điều tôi sin góp ý là nên bôi keo vào khi lắp đằng sau và nên có hai lỗ thông hơi ở đằng sau
ang ganda ng gawa ang gaganda ng gamit mali yong lagay ng tweeter wala pang air hole hay nako iho????????
Holzarbeit, sehr Cool, Verkabelung, Dämmung, ect: Typisch Made in China außen Hui innen Pfui aber Tolles Projekt.
красота, было бы неплохо, если бы ссылки прилогались на оборудование
Link for the amplifier?
Só faltou o dulto de ar mais ficou muito bom
Hi, where I can find this audio amplifier? pls link
Pang halo halo
Os drivers na lateral ficou muito esquisito pra o som foi o único erro do projeto aí no mais focou muito bom
Where’d my pen go? 8:30
Faltou ventilação no grave...
12.2
Hino quality
4.10
12.2.4/10
Gum dril screw fixed Kingston current pole
Это видео о том как плотник решил себе колонку замутить????
Все норм, но задняя стенка очень тонкая, герметик нужен, и наполнитель типа синтепон, почуть
Столько труда , чтобы в итоге это не звучало как надо , это конечно дорогого стоит ! А звучать эта конструкция точно не будет ! Понимания ,что такое акустика у парня нет ,от слова совсем . Все неправильно от А до Я ! Лайк за труды его !
where is the soundproofing?
Trabajo excelente...pero sonido.......
you forget the air hole broo
😎😎😎
❤️👍👍👍🇲🇦
Пишалки в стороны направил. На этом можно заканчивать просмотр видео.
Làm cho vui thôi chứ âm thanh thì ko đạt vì thiếu rất nhiều thứ và độ bền ko có. Nói chung là ko ok.
Тема интересная , но звук как из унитаза , вч драйверы в бока это полный бред , задняя стенка набор деревяшек .
우와 ㅋ
Высокочастотным динамикам по бокам делать нечего. Они должны быть в переди.
Made in Vietnam .
👍
Повезло тебе. У тебя новые пальцы быстро вырастают, когда их пилой случайно отпилил. У остальных не так(((
Se nota que no sabe mucho de sonido
Solo hiso el trabajo para mostrar las herramientas
Se puede hacer con menos cosas
Ну зачем же длинную доску с короткой склеивать?!!
Верните мне мои 47 минут
Что бы не городить.такую
Тумбу можно к колонкам такую же коробку касетник тюнер усилок сверху вертушку слава богу додумались делать их плоскими ну об двди как то отпало само собой хотя как то коль все так все..удачи всем думаю многие думали но вот современные производители мебели как то хотя новая мебель не знаю чья она Томская что-ли позволяет втулить все это .
👏👏👏🇧🇷🇧🇷
🌹🌹🌹🌹🌹❤️
atrás la tapa debió ser un solo cuerpo y desempotrable con tornillos y no grapas
Как мебель норм, как стереосистема ноль, хотя и как мебель не очень аккуратно, можно было лучше сделать
You are not thorough enough. Don't you need Soldering or sound absorbing material, I think these are need.
Just right!!!!
Now the sound have much armonikes,and is hard😢
😊😊
👍👍👍👍👍👍👍👍👍👍
Клеймы где фазо инвеотора нет
So a XXXL Boombox..
Te faltó publicar medidas
И стоило столько махаться? Из фанеры быстрее.
All the westerners and their big brains. It's as if this man is selling the stand to them. Why don't you people build your own speakers stands on your own RUclips channel and make a 2 hour video where you yap yap yap about all the specs and this n that. Some people just enjoy watching someone do something they love, no need to be institutionalized about a simple DIY non commercial. Go and make noise to car manufacturers who don't bother at all with technicalities when installing a system that costs a third of the car, having speakers resting directly on aluminum panels with no sound deadening or anything like that.
(Write Turned s hanger for pining with tesl. a)
Комод с динамиками.
mending pake triples
Dia tukang kayu bukan tukang sound system
wood 5:12
마이크테이스
Так себе звук.Ни низких ,ни высоких частот .Среднее что то молотит.И ради такого стоило заморачиваться ?
так все криво, щели ппц, внутри ватин не положил, звук наверно как в ведре