What pipe did you use for your air intake? I see you posted the filter, but not the actual intake. Just got my scion and your videos inspire. Also, do you get any check engine lights with it?
Oh wow!!...awsome stuff man, nice color selection as well. I am still working on getting one of these 1st gen Scion Xb's...i can't wait!!!👍🏽🇺🇸🇯🇲🌴☀️🌴🚗💥🗯🗯
I heard that the short ram intake is good for low end torque/pep while to cold air intake is better for high end speed for these 1.5 liter Xbs.. I seen this information on the Scion Xb forums.👨🏽💻🚗💥🗯🗯 I think I might stick with a short ram intake for that extra low end pep for round town driving.🇺🇸🇯🇲🌴☀️🌴
I've had both. Honestly if my aem cai didnt finally crack after many years I would still have it. I have an sri now but the aem was the shit. One huge thing though, if your slammed you need to make sure the filter is protected of you'll swallow water in puddles.
The four give aways that this would be a badass video! 1) It's an XDD vid to begin with. 2) We were made to wait a week. 3) The misses makes a cameo at the start. 4) Power tools rev up at the start. Great video man, it came out looking sweeeet! How's the box running with that short ram? Will there be a mid week review vid or are we waiting till next week when you unveil the entire front end rebirth!?
The short ram set up works about the same as the old setup, but looks way better. There will be a review video tomorrow and the front end rebirth is coming along slowly thanks to shipping delay. :(
Extreme Daily Drivers right, I watched the video and checked the description for a link but couldn’t find where you bought that bar (pre paint job). I’ll keep searching!
Looks fantastic but metal cast paint my friend used on his valve cover did not like the heat very much and it bubbled up in some places. Hopefully yours works better
Thanks for watching! It works just fine if you prep the surface properly. I have been running the same paint, but in blue, on my Prelude's valve cover with no issues. Thanks for watching!
I almost found a xb at junk yard but was gone when I got there, Great work man. Quick question I have an 04 and just curious to know what color coolant is used for these vehicles.
Thank you so much for this video! I am learning so much from your channel. Really want to try the same intake set up, just wondering, did you notice any changes in fuel economy? Thank you
Hi my name is luis was wondering when u paint your intake manifold from your xb do you have videos on that part and I like your video keep making. Thank u and be waiting for respond
I need to clean my engine too but dont what to use to clean? And can spray my engine with water? My engine is stock what should do first to make my engine better?
Loving this setup. You’ve convinced me to do this intake set up. Only problem, I’m throwing a P0171 code now. Any ideas on why the intake set up is causing this?
Looks good man nice work. Just curious though..I noticed on ur xb and prelude u like to face that seam up on the cone filters. Any particular reason? For some reason this always stands out to me as I personally try to hide that seam by facing it down or whatever. Anyways..appreciate the vids..I had an xa and 91 lude...so I can relate to both ur rides.
The seam is faced up on the Lude because it keeps the Blox logo on the end of the filter level and I was not paying attention to it on the xB :P Thanks for watching!
This looks amazing! How do you avoid getting water from settling on top of the motor and filling up your spark plug holes and fouling your coils? I ran without the engine cover on mine for a few months and kept finding that my plug holes were completely full of water even when it hadn't been raining that hard. (it's not a head gasket problem - just had that done a few months back) :)
So you want me to drive 30 minutes to the junkyard, hunt for the car in 90 degree heat, remove the valve cover, buy it with my money and then sell it you for the same amount I purchased it for and then box it up and ship it to you? Seriously?
I’m saying if you were at a junkyard already for something else and came a cross one I would pay for it as they are selling for 60-80 on eBay. I wasn’t asking for you to just go there for me. Unfortunately in nyc or the surrounding area we don’t have junkyard that you can pick parts off of. Sorry for asking
I'm just sassin' ya. I know what you are saying. The best way to fix this is for you to move from NY. A state with no pick-apart? I think that's illegal.
Extreme Daily Drivers Nice! Keep up the great work. I’m really digging the xB videos. I have mine parked in my garage but really want to start doing some modifications again!
Damn what a magnificent clean engine u made man, and that prime to copper or age finish, beautiful touch. This is an ASMR type shit and I love it. Why did u change ur CAI pipe? What was the purpose of that? @EXTREMEDAILYDRIVERS
You’ve inspired me to give love to my scion.
That's the whole reason behind the channel!! So glad to hear you inspired!! Thanks for watching!
What pipe did you use for your air intake? I see you posted the filter, but not the actual intake. Just got my scion and your videos inspire. Also, do you get any check engine lights with it?
The ASMR style was a really good choice for this video. The end result of both your work and the video are fantastic. Excellent work brother
Holy crap. That looks awesome! Good job man. So glad you’re doing toaster Tuesday’s!
I’m glad you came along I could not find how to do certain things on here at all for my 05 xB thanks for sharing.👍🏼
Glad to help
Oh wow!!...awsome stuff man, nice color selection as well. I am still working on getting one of these 1st gen Scion Xb's...i can't wait!!!👍🏽🇺🇸🇯🇲🌴☀️🌴🚗💥🗯🗯
Your giving me ideas! Love the video! Keep them xB vids coming!
I want to get back into babying my toaster. Rocking the RS2.0. Need some inspirational videos to get me back into it. Looks awesome.
Thanks!
WoW! Thanks a bunch I will start on my xB today! Thanks for all the info!
I heard that the short ram intake is good for low end torque/pep while to cold air intake is better for high end speed for these 1.5 liter Xbs.. I seen this information on the Scion Xb forums.👨🏽💻🚗💥🗯🗯
I think I might stick with a short ram intake for that extra low end pep for round town driving.🇺🇸🇯🇲🌴☀️🌴
Junior Lexus I have Aem cold air intake makes a big difference.🚙💨
I've had both. Honestly if my aem cai didnt finally crack after many years I would still have it. I have an sri now but the aem was the shit. One huge thing though, if your slammed you need to make sure the filter is protected of you'll swallow water in puddles.
Nice.. Thats clean looking...
Thanks 👍
Dude, that was more like an engine bay RECREATION 😲👍!.. absolutely FLAWLESS doc😉😎!..
Thanks!!
@@ExtremeDailyDrivers :
Mos-Def👌
Love how that came out
another great video. The color looks good. I was honestly expecting a battery relocate when you started cleaning up that area.
I'm considering something a little different, but I haven't made up my mind yet.
Nice! I like that color theme going on.
That looks really good
Love the color and look
Thanks!
Bro! That orange 🍊 on white...🔥🔥🔥 awesome color choice. 🤙🏻💪🏻
Thank you. I was inspired by KTM motorcycles.
So clean nice work
Thats clean
Heck yeah! Saw you post the VC in the group. Watched your videos before, very cool!
Awesome! Thank you!
Looks great, job well done.
Thank you very much!
Where did you get the strut bar?
It came with the car.
Highly effective on a budget!
Thanks!
Simple and effective... Nice
Clean. I like it.
Wow great work!
Awesome transformation 💪💪💪
Thank you 🙌
Damn that came out good!!
very cool. im inspired to make mine look less shit now!
Thanks!
This is great man!
Thank you!
I got a 3rd g prelude and also an xb
You are a lucky man!
Awesome video man! Love it!
Good job 👏 vato 👍🏻
Thanks!
best engine bay cleaner ,,,,, found at local dollar tree,,,, called awesome
Thanks for sharing
do you have a link for the valve cover bolts you used? awesome videos btw bro
Great quality video
Is that lkq on colonial Dr? If not it looks very similar to the local junkyard
Yep!
Like the track bar. Where did u get that?
This car didn't have a track bar. Thanks for watching.
👍👍👍 looks awesome!
You are broadcasting to a very small field but god dam I love this!
Thanks for watching.
what type of degreaser do you use ??
Simple Green!
Gorgeous just magnificent
Thank you so much!
Any idea who made the strut tower brace? I can’t find one anywhere….Thanks
Hotchkis. They are still out there.
🔥Insane!! like your work.🔥
Nicely done! What did you lop off the head with the grinder in the beginning?
Thanks! Those were mounting spots for the plastic engine cover.
@@ExtremeDailyDrivers oh got it
I assume the mass air flow tube that you bought was the 63 mm one correct? I have a 2005 xA and I follow your videos basically it's the same car.
Links for everything are in the description box. Thanks for watching!
Siiiiick!
Very nice.
Thank you! Cheers!
The four give aways that this would be a badass video!
1) It's an XDD vid to begin with.
2) We were made to wait a week.
3) The misses makes a cameo at the start.
4) Power tools rev up at the start.
Great video man, it came out looking sweeeet! How's the box running with that short ram? Will there be a mid week review vid or are we waiting till next week when you unveil the entire front end rebirth!?
The short ram set up works about the same as the old setup, but looks way better. There will be a review video tomorrow and the front end rebirth is coming along slowly thanks to shipping delay. :(
Where did you get the front strut bar you’re using? It’s gorgeous!
I painted it. Check out my engine bay transformation video for more details.
Extreme Daily Drivers right, I watched the video and checked the description for a link but couldn’t find where you bought that bar (pre paint job). I’ll keep searching!
Looks fantastic but metal cast paint my friend used on his valve cover did not like the heat very much and it bubbled up in some places. Hopefully yours works better
Thanks for watching! It works just fine if you prep the surface properly. I have been running the same paint, but in blue, on my Prelude's valve cover with no issues. Thanks for watching!
I almost found a xb at junk yard but was gone when I got there, Great work man. Quick question I have an 04 and just curious to know what color coolant is used for these vehicles.
Pink. Thanks for watching.
does the cold air intake reduce fuel efficiency?
No
Look good. Good job. Amigo.
Thanks 👍
Thank you so much for this video! I am learning so much from your channel. Really want to try the same intake set up, just wondering, did you notice any changes in fuel economy?
Thank you
I really don't watch it, but there is no real noticeable difference either way.
@@ExtremeDailyDrivers Thank you!
Hi my name is luis was wondering when u paint your intake manifold from your xb do you have videos on that part and I like your video keep making. Thank u and be waiting for respond
Just follow the directions on the can. Every paint is a little different. Thanks for watching.
which m12 Milwuakee ratch is that ? (1/4,3/8 or Fuel). I ve been thinking of getting one.
The middle one. Thanks for watching!
I need to clean my engine too but dont what to use to clean? And can spray my engine with water? My engine is stock what should do first to make my engine better?
Watch my xB detailing videos for the answer.
Loving this setup. You’ve convinced me to do this intake set up. Only problem, I’m throwing a P0171 code now. Any ideas on why the intake set up is causing this?
What does the code say? Make sure you don't have an air leak.
I notice that the XB has a set of roof racks. I'm looking for a set for my 2014 Can you publish the make model of yours. Mahalo (Maui HI)
I did a video on it. Please search the channel.
Great video 🚙💨
I just subbed today . Love the content bro .
Thank you and welcome!
What sort of degreaser do you use in this video?
Simple Green
What exhaust you running?
Dme
I am slowly working on a 06 XB and the intake you have is really nice. What size do I need to order to fit the plastic tube
Everything used is listed in the description box. Thanks for watching.
So the 63mm size is the one I need? I see there is different sizes and Amazon likes to act up when you have links to an item.
Yep 63mm
Thanks
I forgot to ask before I purchase every thing how is the intake set up doing?
Looks good man nice work. Just curious though..I noticed on ur xb and prelude u like to face that seam up on the cone filters. Any particular reason? For some reason this always stands out to me as I personally try to hide that seam by facing it down or whatever. Anyways..appreciate the vids..I had an xa and 91 lude...so I can relate to both ur rides.
The seam is faced up on the Lude because it keeps the Blox logo on the end of the filter level and I was not paying attention to it on the xB :P Thanks for watching!
This looks amazing! How do you avoid getting water from settling on top of the motor and filling up your spark plug holes and fouling your coils? I ran without the engine cover on mine for a few months and kept finding that my plug holes were completely full of water even when it hadn't been raining that hard. (it's not a head gasket problem - just had that done a few months back) :)
That's never happened to me. You got other issues going on. Good luck with it.
Extreme Daily Drivers appreciate the quick response! Thank you! :)
Can you please do a video on how to install the air filter? Thank you.
ruclips.net/video/VraKQKvQI0c/видео.html
Extreme Daily Drivers Thank you!!
Nice bro
Thanks dude.
Looks awesome, i wanna do that with mine. How much did you get the extra valve cover. I dont have any pick and pulls in nyc.
$10
Wow I need to find one if you come across one I be more then happy to buy one off of you for that and pay shipping
So you want me to drive 30 minutes to the junkyard, hunt for the car in 90 degree heat, remove the valve cover, buy it with my money and then sell it you for the same amount I purchased it for and then box it up and ship it to you? Seriously?
I’m saying if you were at a junkyard already for something else and came a cross one I would pay for it as they are selling for 60-80 on eBay. I wasn’t asking for you to just go there for me. Unfortunately in nyc or the surrounding area we don’t have junkyard that you can pick parts off of. Sorry for asking
I'm just sassin' ya. I know what you are saying. The best way to fix this is for you to move from NY. A state with no pick-apart? I think that's illegal.
Is there any benefit to having the engine cover? Or does it just for looks?
It's just for looks.
Extreme Daily Drivers Nice! Keep up the great work. I’m really digging the xB videos. I have mine parked in my garage but really want to start doing some modifications again!
They are so fun to work on. It's like building Legos and parts are still pretty easy to get.
How well did this hold up. I know you sold the car. I was curious on the longevity.
It still looked brand new. Watch the video I made when I posted the car for sale. You can see it in the video. Thanks for watching.
A little spray can can do amazing things 😅 for a project like this, I think I'll just get a new valve cover. I think I'm over scrubbing and cleaning 😅
I have one if you want to buy it.
@@ExtremeDailyDrivers thanks but I'm on a gen2 xB now. My 05 got totalled 😢
Extreme Daily Drivers I’m interested in your old valve cover.. how much you want for it?
@@cautiondolls $40+shipping
Whats in that spray bottle?
Simple Green cut 4:1. Thanks for watching!
Damn what a magnificent clean engine u made man, and that prime to copper or age finish, beautiful touch. This is an ASMR type shit and I love it.
Why did u change ur CAI pipe? What was the purpose of that? @EXTREMEDAILYDRIVERS
I'm not a fan of cold air intakes. We get too much rain here in Florida. Thanks for watching!
Man f*** that Scion !!!! What about that sweet prelude in the driveway BRUH?!?!
Check out my Prelude Playlist, BRUH!!!
What's that hotchkis part called?
It's a strut bar brace.
Envia fotos y como conseguirla
Satisfying A.F.
Thanks!!
out of curiosity what was the thing you cut off the valve cover in the beginning?
Those are mounting brackets for the plastic valve cover cover. Thanks for watching.
I'll never sell my bB...
Bad ass!
Thanks!
Total cost to do this ??
I don't know. $40.
Como conseguir el sueter de la scion
Muy bien 👌
Which diameter Qiilu Air Flow Meter Sensor MAF Sensor Mount?
Check the Description box for a link.
What size is your battery 🔋 car..
In this video it's the stock size, but I changed it when I installed my custom intake. I did a video on it. Check the xB playlist.
FUCKING BEAUTIFUL!!!!😍😍😍😍
Thank you!
Жаль что эта красота не надолго ...
Hillman fasteners..ok....size? Kit? Lil help bro
Nice job
Pause the video and write down the part number. Let me know if you need anymore help, Bro.
7:18 Los tronillos donde Los compraste
He's asking where did you buy the bolts?
Thank you.
I bought the bolts at Lowes. You can find them at Lowes, Home Depot or Ace Hardware.