Ultimate SCX6! Vitavon Caged 2 Speed Bouncer/Crawler Part 1!
HTML-код
- Опубликовано: 20 июл 2024
- Building my most expensive and largest build yet! Follow along as I build the ultimate SCX6 Bouncer/Crawler.
Thanks to Joe for the help!
Check out Exocaged RC here!
youtube.com/@ExocagedRC?si=Ab...
Castle 1515 System I’m using found here
bit.ly/3QZL1FV
Scx6 Team KNK screw kit found here
bit.ly/490pvYZ
Shift RC X5 Servo I’m using found here
bit.ly/3qJARwe
Treal High Clearance links found here
bit.ly/3UBbOf6
Samix brass Knuckles found here
bit.ly/3wjWgSY
Vitavon Cage found here
www.ebay.com/itm/285628174113...
Vitavon Axle Housings found here
www.ebay.com/itm/284531030000...
Vitavon Motor Mount Transmission found here
www.ebay.com/itm/285317343024...
Vitavon Driveshafts found here
www.ebay.com/itm/284633094288...
Vitavon Servo on Axle mount found here
www.ebay.com/itm/285088346733...
Vitavon Ring and Pinion gears found here
www.ebay.com/itm/194977097716...
Jennys RC parts purchased through eBay store here
www.ebay.com/str/jennysrcspor...
6s Lipo I’m running For Power
amzn.to/48fMIWo
4s Lipo I’m running for Servo (I made adapter)
amzn.to/4bGA6KD
I finally have Merch!!
Be sure to check the sizing chart and maybe size up on those Hoodies.
Check it out at the website below!!
2fm-rc-shop.fourthwall.com/co...
Don’t forget 2fmrc at checkout for discounts at most of your favorite shops!!
HELP SUPPORT the channel by clicking my affiliate links below and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CurIyF
FairRc affiliate link here
shrsl.com/3qxuc
FMS Affiliate link here
www.fmshobby.com/jsVeIxtdZHBb...
Amazon affiliate link
amzn.to/3I4tQzI
RCAWD affiliate link here
rcawd.com/?ref=FaSRjm2T
Other DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~ Развлечения
Now that is a Valentine's Day gift!!!! The wife hooked you up without even knowing it!!! Nice!!!🤘🤘🤘🤣🤣🤣
"I feel like it could be a little bit cheaper" 😂 I think we all wish Vitavon was cheaper. They would absolutely get more business from the rc community if they came down even a little bit! I actually appreciate you building the parts and showing us the process. Gives us a little more confidence when we tackle our own builds. Always love your mini builds but I can't wait to see this behemoth built and tackling the rocks! 🤘
Really appreciate that! It’s a monster for sure. Can’t wait to get it out and rip!
Love to see someone else do a scx6 build. Exocaged and 2fmrc are my most watched channels. Would love to see a collab between you and Joe.
That would be awesome for sure! Maybe someday I can visit his spot. That would be a lot of fun I’m sure
That big chunk of Vitavon metal is so satisfying I watched the whole thing. What a dream build! So I say do a whole series so I can live vicariously through it.
Really appreciate the time watching. It really is a dream build for me as well. I sold several of my RCs to build this one. It’s definitely the most expensive build I’ve ever done. Actually just got her finished up today and it’s NICE!
@@2fmrc It’s DONE! You must be stoked! Can’t wait to see the rest of the build, and see it eating up the hills!!
very cool. i'm taking a backseat with the hobby this year (spent a god awful amount of money last year) but i still love these "ultimate" builds, Vitavon makes the best stuff hands down
I really appreciate the view. Vitavon is the best when it comes to these bouncers etc. Absolutely loving everything from them on this build so far!
That’s a big shiny expensive project! ❤😮
I wish Vitavon would make a bouncer chassis for my Raminator. As you said, I have seen some random one-off ones but they are one piece so it's hard to work on, and if you bend something the whole thing is trash. Vitavon is king when it comes to upgrades. I have sent them emails in hopes one day they do it. Can't wait to see yours done. It's going to be sick!
Wow awesome dude yeah here watching Wednesday evening 9:02 PM that’s gonna be a sweet build
Wow some beautiful parts there, I'd say show us the parts briefly as you put them on is fine. It's going to be so gorgeous when it's finished,👌
Sweet. I have 2 Vitavon RYFTs. If I had a bottomless budget I would be there with you 💯❤
Well I had to sell quite a few of my others to build this one but I figured it’ll be worth it. Hopefully it don’t break as much as my ryft 😆
I enjoyed watching you build the front axel... BECAUSE it's not something you do often.
I did appreciate you speeding it up at times when you weren't talking.
Because this is something completely different than what you normally do... aaaaand something many other channels could do, I'd enjoy watching you build this beast.
P.s. i like that the axels are an off color so they stand out subtly and dont pop like if they were red or something.
You paid bog bucks for them... they deserve to stand out... aluminum would have just blended on with the cage and once it has wheels they would have been lost in the build.
Now they will be noticable without looking like a clown car...
Paying $400 for axels that blend in... would be like paying 300k for a lambo than tinting the windows...lol
Haha! I really appreciate it. I’ve got it all together now and absolutely LOVE the offset axles. Glad I went with the titanium. Really appreciate ya watching!
Awesome I’ll catch you on the next one 👋👋😎
I can't wait to see this build on the rocks! I recently picked up an SCX6 Honcho and have been loving upgrading it, so it's cool to see you putting out new SCX6 content. I think a build breakdown after the fact and multiple running videos would be my choice for this series. No need to go through every nut and bolt. That's what exploded assemblies are for!
Will be interesting to see what the masses want but I’d love to see each piece built. It’s so gorgeous!
stoked for this series personally i like the bigger rc's that why i subscribed so i dont really watch all them little 1/24 scale stuff
I really appreciate ya checking out the larger stuff I do! I actually run the larger stuff more than the 1/24s but don’t show as much cause usually people wanna see my 1/24 content. I really appreciate the support with the larger stuff though!
Nice kit.
I got a set of those tools very expensive but they feel just right.
Gonna be a badass rig🔥🔥🔥🔥
Really appreciate it! Can’t wait to get it finished up!
If those GPM shocks dont work out for you try out some Tekno shocks for the V1 MT410 with m2c shock caps. They are some of the smoothest shocks ive ever had. This is a super sick build. Camt wait to see you send it !
Nice! I’ll have to look into those. These gpm seem to be good so far but I am having a little issue mounting them. The shock cap hits on the front mount so I had to flip the fronts. I was fighting with them today actually. I may end up moving the gpms to one of my other scx6s and try something else on this when I get the money. I’ll definitely check those shocks out!
Gonna be a nice build. But I’m ready for the truck behind you on your bench 😏
Haha! Nice eye! Wondered if anyone would notice that 😉
the shims are to shim your gear mesh ( pinion depth and ring gear backlash...)
This is going to be a sick build! I just saw there's new updated scx24 gladiator now
Thanks! I seen that. Honestly I’m to the point of not even buying the new scx24s until they make some real changes to them.
I hear you there. I have been enjoying building chassis up with mazz, uaf, etc. It's lots of fun, but you know how expensive that is without starting with an scx24 to cannibalize. Anyways, you and cape crawlers are where I send everyone new to scx24s. You've done alot for 24s and I appreciate you!
@@johnnyhotshoe1292 I really appreciate that. It’s amazing how far these things have come over the last couple yrs!
I'm excited to see this one come together. I've been contemplating a Vitavon portal Ryft build... big crawler..?
Nice! The ryft is a lot of fun!
7:13 when applying locktite make sure to remove all the old locktite, otherwise the new locktite will do nothing.
Awesome 😉👌💪
i would be using the VITAVON CNC Alu7075 Front Axle Portal Kit With Diff Case Set For SCX6 Jeep Wrangler Trail Honcho 1/6 - Front and Rear for a 4WS build.
I guess if I was crawling a lot with it I may go that route but I hate 4ws most of the time (especially for bouncing) and didn’t wanna add the portals and raise it for the hill killing.
Hoosier RC hobbyplex has the paddle tires for the promoto id like to see you do a review on them
SWEEET👌😎
Do a few upgrades and talk. Try to keep it the same length video (as this one). You’re a bad influence making me want a 1/6th crawler for the price of a beater civic.😂
Haha! Hard to beat the ol civic but this thing is pretty sweet!
Where’s the link in description abouts exocage Joe
Oops! Thanks for the reminder
3:45 what motor is that
You forgot a bolt on the bottom of the knuckle
Thanks for the heads up! I was originally waiting on another set of those screws so just had it held in with 1 lol
Do each piece
I’ll watch whatever you share everything you sure Yep 👍👍😎