This hack is definitely a game changer for me, especially for my both sublimation and regular ET 4800 printers. I use one for sublimation and one for regular ink, both only prints 8 1/2 by 11. I have several projects that I want to do, but can't because they can't print large enough and it sucks, but learning this hack from you can change all of that. Also, I need to start using that program that you used in this video because I am so tired of paying for Cricut design space and can't even print a full page. Thanks for sharing what you did with us all. The way that you demonstrated made it look so easy to follow. I can handle that better. I'm going to go watch more of your videos. Stay blessed😘👍💕💕
You are definitely my game changer and motivational creator in my book. i am woke. Thank you for sharing your hacks. Because I was just about to get another printer just to print bigger.
I have been trying to figure this out for months then I came across your video this morning searching for something else. Needless to say new subbie!!! Thank you for sharing.
Hi great video when I do this I don't cut it I just put the pic like that and it prints only whats on the mat the I move it over n print the other half .
Oh, thank you so much!! This training was excellent. I actually have a Silhouette Cameo and use Silhouette Studio all the time so it was a blessing that you used that software!!!
I truly appreciate this tutorial!!!! I’ve just started doing blankets and the size of the rectangles aren’t “printer” size for my desire projects. Thank You so much!!!!!
Loved this tutorial!!! I wish I had seen it sooner than 6 months later. Does this help hide or eliminate the lines that can show up on the pressed item? Thanks so much!
You are definitely a game changer!!!! I appreciate the effort & information. One question, when sublimating don't you have to flip (most) images in the opposite direction before printing? This may be obvious to everyone but I noticed you didn't do that in this video. Thanks for sharing!!! See you soon!
BACK THREE MONTHS LATER TO SAY, THIS IS SO MUCH EASIER THAN ALL THE OTHER VIDEOS I'VE SEEN SINCE SEEING YOUR VIDEO.. THEY WOULD MAKE ALL THESE COPIES AND ALL THIS CROPPING AND STUFF... THEN THEY WOULD SAY YOU NEED BUSINESS EDITION TO SPLIT YOUR LARGE IMAGES.. YOU THE BO@M SIS 🙌🏽🙌🏽🙌🏽
Cutting the print in pieces, printing and then trimming the appropriate borders makes a lot of sense. Thanks for showing how! One thing, though- for a photograph, you probably should have kept the vertical/horizontal ratio locked before enlarging, and then cropped the pic to fit the space. The way you did it makes your subject look fat because the aspect ratio is distorted. Nevertheless, I learned from your video, so thanks!
Thank you 🙏🏾 thank you thank you❤❤❤❤ ,ive been trying to learn how to this for a while now and ppl just act like you need to pay them and I get it ❤❤❤ 9
Thank you are you able to do cut out stands for projects displays I have hard time standing mines up n I dunno how to stop them from falling down I just love this so much
Omg you dont know how long i been trying to figurebit out...didnt wanted to buy another printer.....please tell me which one of silhouette apps...cuz its keeps giving me a virus warning please please
I have never gotten that warning. I’m not sure about that. But the app itself is safe I have been using it for a couple years now my computer has never gotten a virus.
This hack is definitely a game changer for me, especially for my both sublimation and regular ET 4800 printers. I use one for sublimation and one for regular ink, both only prints 8 1/2 by 11. I have several projects that I want to do, but can't because they can't print large enough and it sucks, but learning this hack from you can change all of that. Also, I need to start using that program that you used in this video because I am so tired of paying for Cricut design space and can't even print a full page. Thanks for sharing what you did with us all. The way that you demonstrated made it look so easy to follow. I can handle that better. I'm going to go watch more of your videos. Stay blessed😘👍💕💕
You’re welcome! So glad it was helpful! Thank you for showing my channel some love! ❤️
THANK YOU FOR THIS!!! You have saved so much time and materials!!!
You are so welcome! 😊
not a long video and straight to the point with clear directions! love it! thanks for this walkthrough!
Your welcome 🙂
You are definitely my game changer and motivational creator in my book. i am woke. Thank you for sharing your hacks. Because I was just about to get another printer just to print bigger.
This is the one of best i saw great video keep up the good work
Thank you so much! Glad you liked it! 😊
I have been trying to figure this out for months then I came across your video this morning searching for something else. Needless to say new subbie!!! Thank you for sharing.
Thank you so much for showing this. I’ve been trying for week to do this. Downloaded silhouette import pictures and print. Awesome
You're welcome! Glad this was helpful. 😊
I can't thank you enough for this video! Thank you Thank you Thank you!!!!!!!
😂😂😂😂 You are so welcome!
Hi great video when I do this I don't cut it I just put the pic like that and it prints only whats on the mat the I move it over n print the other half .
That's a great idea!
Oh, thank you so much!! This training was excellent. I actually have a Silhouette Cameo and use Silhouette Studio all the time so it was a blessing that you used that software!!!
I truly appreciate this tutorial!!!! I’ve just started doing blankets and the size of the rectangles aren’t “printer” size for my desire projects. Thank You so much!!!!!
Glad it was helpful!
Excellent training. Got it first attempt. Thank you.
Great job!
Thank you I have been wanting to learn how to go this
You are so welcome!
Loved this tutorial!!! I wish I had seen it sooner than 6 months later. Does this help hide or eliminate the lines that can show up on the pressed item? Thanks so much!
I don’t have lines show up you have to cut perfectly on the seams
Thank you so much the best tutorial as of yet that I seen great info
You’re welcome! I’m glad it was helpful.
Hello from TikTok! I love your videos. You explain so well.
Hello, Thank you 🙂
This is the best video that I have found to help me. Thank you!
Glad it was helpful!
Thank you !!! Yes. Very clear and detailed ! I came here from TikTok.. (crafty vibes)
Well Hey my TikTok friend lol
You did that I love the way you explained how to do that ❤
Thank you! 😊
You are great at teaching and walking through what to do thanks for the excellent videos
Great. That was so easy. I'm just getting started. Thanks so much for the information.
You are so welcome!
You are definitely a game changer!!!! I appreciate the effort & information. One question, when sublimating don't you have to flip (most) images in the opposite direction before printing? This may be obvious to everyone but I noticed you didn't do that in this video. Thanks for sharing!!! See you soon!
Yes you mirror your image I didn’t have to in the video because I already have it pre set in my setting to always mirror when I use that printer
BACK THREE MONTHS LATER TO SAY, THIS IS SO MUCH EASIER THAN ALL THE OTHER VIDEOS I'VE SEEN SINCE SEEING YOUR VIDEO.. THEY WOULD MAKE ALL THESE COPIES AND ALL THIS CROPPING AND STUFF... THEN THEY WOULD SAY YOU NEED BUSINESS EDITION TO SPLIT YOUR LARGE IMAGES.. YOU THE BO@M SIS 🙌🏽🙌🏽🙌🏽
😂😂 listen it took me a while to get here you wouldn’t believe the trouble I would go through before I found this solution
Cutting the print in pieces, printing and then trimming the appropriate borders makes a lot of sense. Thanks for showing how! One thing, though- for a photograph, you probably should have kept the vertical/horizontal ratio locked before enlarging, and then cropped the pic to fit the space. The way you did it makes your subject look fat because the aspect ratio is distorted. Nevertheless, I learned from your video, so thanks!
Thank you for that tip
Excellent video!!! Thank you so much for sharing this with us!
Glad you enjoyed it!
Would the white border be showing on the shirt after you pressed it?
No it’s just white paper not white ink
Love this video. Very easy to understand and follow. Going to try it out .
Thank you 🙏🏾 thank you thank you❤❤❤❤ ,ive been trying to learn how to this for a while now and ppl just act like you need to pay them and I get it ❤❤❤ 9
I hate when they do that
Very nice……time to try it out!! Thanks much!
Please do!
Love the video… question do we need to mirror our image?
Yes
Yes always when doing sublimation anything else then no
@@sharenalatrese_thecraftgoatthank you
Very helpful and informative video! Thank you so much! I need to see more of your videos. Just subbed.
Thanks for the sub!
@@sharenalatrese_thecraftgoat you’re welcome ❤️
Omg! We have the same name, but mines a i instead of an e. Glad I found this video.❤
Your name is beautiful
Thanks for sharing; very helpful
You're welcome thanks for watching.
🎉 Awesome video. I was looking for this. Thank you.
Glad you liked it
Thks are the best in teaching how to make a larger image, thks for sharing
Thank you are you able to do cut out stands for projects displays I have hard time standing mines up n I dunno how to stop them from falling down I just love this so much
How do it for the sleeves
Confused at what you’re asking?
This way seems much easier than the trace I will be trying this soon.
Ok good let me know how it works for you.
Do I need to reverse the images?
Oh my goodness! Thanks so much for this video!! Been trying to figure this out forever.
Great tutorial!
Thank you!
Thank you! Do you think I can do this with the DTF sublimation hack for dark colors🤔
No I think I lt would be hard to cut without smearing the ink
Could you cure the pieces individually maybe?
Thank you. i love this.
Thank you for sharing sis
Great tips, thank you
also I follow you on TIKTOK. Can I just say Amazing.
🙂🙂🙂🙂🙂thank you
Thanks for sharing. Love it!
Thank you 😊
Thank you for the tips on silhouette
Thank you very much for this tutorial. It was awesome.!!!
Thank you soooo much for the tutorial ❤
Thank you❤️
YW 🙂
Thank you so much. You explained it well.
Can you use this app using a cricut machine??
The 15*15 on transfer paper how do you press with all the tape
It’s sublimation paper and the tape is heat tape which is heat resistant. You would press like normal that’s what the tape is made for.
hey Sharena, new subscriber
hello & WELCOME!
what if the image has multiple designs?
What do you mean?
Thanks for sharing!
Can this be used with the basic edition?
What do mean?
Thank you!!!!
I was looking to find out how to set up my epson 4800 so the ink is brighter
my paper size for my sg1000 is 11x 17 why won't it let me do these measurements
It should allow you to break up an image to print on a 8.5 x 11. Where do you usually print from with your printer.
Tfs❤ can I do this from my phone?
I have never tried from my phone 😳
@sharenalatrese408 ok thank you ❤️
Omg you dont know how long i been trying to figurebit out...didnt wanted to buy another printer.....please tell me which one of silhouette apps...cuz its keeps giving me a virus warning please please
I have never gotten that warning. I’m not sure about that. But the app itself is safe I have been using it for a couple years now my computer has never gotten a virus.
Cut my picture but when I clicked on mouse curser and go back to image and it’s still in one piece
Sounds like it didn’t cut you got to start the cut above the picture and take the cuts pass the picture
Nice thanks im learning how to lol
I love this but lord you using 4sheets instead of one...
Dont know if its better to get a bigger printer... lord i dont know