RMM - Electric Conversion Bracket Install - Part 1: Main Bracket and Motor/Drivetrain Installation
HTML-код
- Опубликовано: 21 июл 2024
- Learn how to install the Reel Mower Mods electric reel conversion kit!
This installation covers the main bracket install as well as the motor and drivetrain install.
Our kit changes a manually powered push reel mower to an electric powered reel. You can use any power tool battery system you want!
More details about our electric conversion kits here: reelmowermods.com/products/
00:00 Intro
01:23 Disassembly
04:48 Main bracket Install
07:52 Quick-Adjust Front Roller Bracket Install
15:58 Motor and Drivetrain install
25:22 Front Roller Install
Music Credits:
Rise by Corporate Music Zone | corporate-music-zone.bandcamp...
Music promoted by www.free-stock-music.com
Pumped about this! Looks like your site is down at the moment so I can't look it up, but does this kit work on the American 18in 5-blade?
Yes, our kits work with the American Lawn Mower 18" 5-blade mower! Site should be back up with pre-order soon.
Since you loosened bedknife, will it need realignment and paper test, in your experience or just snug the bolts back up?
I would say its case by case, In my experience it did not affect the adjustment. Its never a bad idea to recheck and verify that the bed knife adjusted properly when modifying the mower.
Which bolt hole would you want the wheels for lowest HOC if you are keeping front stock wheels?
The top hole in the frame.
@@ReelMowerMods so that means the standoff goes in top hole right? My chain looks like it's going to rub against the standoff when it runs....
@@JMBlackNet When the chain is tensioned properly it's a non issue. Especially with the new chain tensioner and hardware I'm going to send out soon.
Okay I'll finish it tomorrow. Know off hand how much clearance should be between chain and standoff when properly tensioned?@@ReelMowerMods
@@JMBlackNet around 1/4", the stand off "flat" edge should be turned parallel to the chain for max clearance.