I make concrete candle vessels from 3d print, silicone mold to pouring concrete. This technique is amazing and would give me a ton of options if I were able to follow along. I, like the other guy got hung up at 2:11.
Thank you so much for making this video but man I've been trying to do this for 45 min now but when you skip and move forward you don't tell which keys you press or how you got there this is good for moderate or pro blender people but not for beginners i only got far as 2:11 poking the cube first time , i can not figure out the rest of the steps could use a lil more details for biggners without skipping things aside from that 10/10
My bad mate should have enabled the key casting on screen. What we did here is inset faces with i key as a short Cut. Extrude them by hitting E. I did also have my transformation on individual origins ( Transform Pivot near the magnate icon up top), and that I think is all we did here. 🖤
@@architecturetopics THANK YOU SO MUCH , even though you said so clearly i still had difficulty doing it but that's on me as I'm a beginner but i managed to do it, thanks again really appreciate you replying and helping out i shall watch your career with great interest. ganna go look at other stuff you made UwU
Many thanks for all your videos. What blender really missing is the paramteric concept mechaism like (rhino+grasshopper). Wish the future node system can acheive such a thing.
im having a problem 4:28 when you click tab to object mode the lines still appear but when I do the same thing the line disappear. It is about my Blender version? Im using 3.6.2
Thank you !!! I really need this tutorial !!! But I still have a question , how to make the object part is like this organic structure , part is a flat surface in a same face ??
Depend on the structure I think. Mainly by reducing the vertices count in that part so the Sub-Surface don't have much affect on it. Also by using modifiers like simple deform where you can limit the effect to a certain area ( Start - end). I mean blender is not the sharpest in this field so you kinda need to work it around depending on the case.
make sure to use a latest version of blender. We did this using v3.3 and as we said 0:58 blender dev. tend to shift things around so you might check under the add-on info once you enable it for the tools place, usually on the side panel.
To an extend maybe, Geo-nodes can help also. There are things that are time consuming in blender comparing to other Softwares. You can watch the Parametric introduction Video we made, the link to it in the description.
What a damn shame this video has that godawful robotic voice over. It’s very informative otherwise. EDIT: I take that back after having finished the video. You show some features of the Tissue add on, but nothing close to what was shown in the thumbnail.
So this isn't already a "new level" ? Newbie here and I'm already blown away by this level. Thanks for sharing!
the text-to-voice is so funny at times. nice tut!
This is incredibly helpful. I worked before with3Dsmax and it has it easier but now that I use blender it lack on this so thanks man.
True mate! Studio Max or Rhino are more capable in this field. We hope Blender gets there soon.
@@architecturetopics blender wants to rectify this matter
Thank you so much for making this video/tutorial. This inspired me to delve into the tesselate modifier with a new found passion!
Thanks mate! Glad it help🖤
I make concrete candle vessels from 3d print, silicone mold to pouring concrete. This technique is amazing and would give me a ton of options if I were able to follow along. I, like the other guy got hung up at 2:11.
Great tutorial that shows a beginner like me the basics to get started and inspired! The voice over cracks me up but I'm getting used to it haha
SIR LETS SEE THE KEYBOARD SHORT IN THE VEDIO .THNX
Ohhhh so it is Called Tessellate. Thank you so much for the tutorial.
Lucky to find your channel...thanks.
Thank you so much for making this video but man I've been trying to do this for 45 min now but when you skip and move forward you don't tell which keys you
press or how you got there
this is good for moderate or pro blender people but not for beginners
i only got far as 2:11 poking the cube first time , i can not figure out the rest of the steps
could use a lil more details for biggners without skipping things
aside from that 10/10
My bad mate should have enabled the key casting on screen. What we did here is inset faces with i key as a short Cut. Extrude them by hitting E. I did also have my transformation on individual origins ( Transform Pivot near the magnate icon up top), and that I think is all we did here.
🖤
@@architecturetopics THANK YOU SO MUCH , even though you said so clearly i still had difficulty doing it but that's on me as I'm a beginner but i managed to do it, thanks again really appreciate you replying and helping out i shall watch your career with great interest.
ganna go look at other stuff you made UwU
@@architecturetopics Can't follow the video because of that, the faces do not scale the same with the i key
@@mindmythfilms1428 you should try applying scale in object mode before using inset.
this was great tutorial, i just gotta figure out to get the shading smooth. Ty!
I've been waiting for this tutorial. Thanks for sharing
Wish you find it helpful!🖤
@@architecturetopics I did. Your channel / content has helped me tremendously
Many thanks for all your videos. What blender really missing is the paramteric concept mechaism like (rhino+grasshopper). Wish the future node system can acheive such a thing.
So true mate! We really hope they make some fix around it.
How about the sverchok add on? I havent explore it much yet but was hoping for it to work like grasshopper
good tutorial and detail i could follow .
this is really great. If i may ask for a additional feature that would be seeing which short cuts you use.
Thanks for sharing!
🖤
Спасибо за видео товарищ
Fantasy, thank you!
im having a problem 4:28 when you click tab to object mode the lines still appear but when I do the same thing the line disappear. It is about my Blender version? Im using 3.6.2
Thank you so much for your great content
Thanks a lot.
COOOOOL for me!
hello is there a way to then close the mesh inside ( as it is still only a surface) to have solid lattice shape ?
when the voice said lets us roll with this video
i died 🤣
So amazing 👏
Thanks
Glad you liked it mate!🖤
how can I get a preview vor the Collapse in Object mode?
lovely and very nice video 💙💙💙💙
Appreciate it mate!🖤
hello how to show wire in object mode? TIA
Could you show your short cuts keys on screen. I keep getting lost
Thank you !!!
I really need this tutorial !!!
But I still have a question , how to make the object part is like this organic structure , part is a flat surface in a same face ??
Depend on the structure I think. Mainly by reducing the vertices count in that part so the Sub-Surface don't have much affect on it. Also by using modifiers like simple deform where you can limit the effect to a certain area ( Start - end). I mean blender is not the sharpest in this field so you kinda need to work it around depending on the case.
GOOD
Good topic dude
Thanks bud🖤
Looks like the building in german city chemnitz
Very nice tutorial, well explained.
Great subject, I have been experimenting with it lately and really appreciate the video
Glad it help Mate!🖤
Great thanks for it
Pls make some eveeee arcviz tutorial
Thanks mate! will do Something with Eevee.
Hey, i don't have the Tissue tools menu in my screen
make sure to use a latest version of blender. We did this using v3.3 and as we said 0:58 blender dev. tend to shift things around so you might check under the add-on info once you enable it for the tools place, usually on the side panel.
😮
Can we do parametric design in blender?
To an extend maybe, Geo-nodes can help also. There are things that are time consuming in blender comparing to other Softwares.
You can watch the Parametric introduction Video we made, the link to it in the description.
@@architecturetopics thanks
try Sverchok nodes in blender if u want to go full parametric in blender its really amazing .
@@krypt2k25 thanks!
Your skill is sick and i appreciate it but the text to speech is killing the personality behind this video
5:12 lol
what are you clicking ? :(
2.25 minute press ?
In object mode press Ctrl A to apply Scale - Then Press I to inset faces in edit mode.
@@architecturetopics thnx pro
Is This paid addon?
Built in blender add-on, free no need to download anything.
"Please no Music in the Background"
got it!
why is your ai bot voice british ?
u a robot bro?
What a damn shame this video has that godawful robotic voice over.
It’s very informative otherwise.
EDIT: I take that back after having finished the video.
You show some features of the Tissue add on, but nothing close to what was shown in the thumbnail.