The F150 Hellion Twin Turbo Sleeper Kit is HERE!!
HTML-код
- Опубликовано: 13 фев 2024
- Following the success of the Hellion Sleeper kit on the Mustang, Hellion decided to give the F150 market what it has been begging for! A well-engineered complete kit that will absolutely blow you away on the first drive. Check out the video for all the info you need including dyno pulls and dragy results. Then, call 561.571.1173 to discuss your build today!
- Авто/Мото
Kudos to Palm Beach dyno for using SAE corrected numbers 👏
Ken!! The man!! Glad to see you back!!!
Wow the perfect setup for a F150 this is a Bada$$ setup for the street and track.
That cutout is soooo awesome, like the cherry on the cake, for a sleeper setup
That is seriously impressive!
Nasty setup!! Great video!
Good to see you, happy valentine's day. Awsome videos
I wish your videos would include a, "this kit starts at $XX,XXX installed", or just tell us what the retail is on the kit as shown. I get you can't give exact prices because every install is different. It would just be nice to hear a ballpark.
Kits about 7 to 11 k depending in options you pick and easy to install
@@sneezinhatch MOST people aren't DIY'ing a turbo kit in their garage.
@@aaronbritt2025Hold my beer. LOL #squarebodyfromhell #tinker4wddragtruck
@@aaronbritt2025 sounds like people I don't want to be friends with.
All the people i know with turbos or blowers done a "DIY" install. But...we arent wealthy either.
Badass! Hellion sleeper kit on my 17 GT with 64/66's on 20lbs mt82(bc3) 3:31 rear, should be illegal on the street. Lol. I'm going to have to build one of these trucks.
Damn! 880 @ 16psi! That already is super car HP
Nice job Ken!
Great video. Covered all points
Nice... Want to see what else will be done on this build along with HP and dragy times!
Wow what a video. Pretty incredible business here and terrific presentation. I love these Coyote regular cabs and dang I'd want to keep it stock but these videos sure tickle our fancy. 💯Cheers from Clearwater 🌴🤙🏼
Killer ! Sounds bad ass.
That sounds absolutely incredible. I’ll admit I was really starting to come around on these supercharged single cab trucks but now that Helion makes a sleeper kit I am very impressed and may go down this road once I am tired of letting Ford fix my Shelby all the time 😂😅
Nothing sounds like Whipple charger..
@@2damnkwiku can barely hear it tho plus the whistle sounds better
@@felixberrones3313because coyotes dont run much boost. Even turned up on e they run what 15 psi? That whipple aint even working at 15 psi hence the no whine.
@@midnight347 seem some run 27 on whipple even more on turbos
Wow that's cool I'm impressed
Wished mine had turned out this great
Jeff the man at Hellion stand up guy 100% ask for him no games no bs all real talk 100% trustworthy company and salesman 😎
I’ve been watching these trucks evolve and now palm beach is getting in the mix and doing a full break down. I love it. Also a great basic combo here, for the most part, cheap. Great little street ride to scare your wife with for sure. Keep them coming sir. The gtr might leave if I have enough proof that these trucks are worth it. Not to mention put some money back in the bank 🫣
Sweet build guys A+ .ant it funny never thought i see a tweaked basic 4x4 standard cab truck cost more than some houses lol
Paul you and your shop are some of the absolute best at tuning the Coyote engines and i love how you explain how you explain the tune that you settled on for the overall best performance for that vehicle...keep up the Ford content...especially on the Coyotes!
So need that kit for my lifted f150
First time I caught your videos really good stuff.
Would love to have you take a look at one of my cars when I drive down.
Torque very important. A lot ones all they care HP. Torque helps it haul greatly. If too much need good traction for it. Meaning tire and traction bars etc.. hopefully i’m right on that 😂
Theres nothing more sleeper than a coyote with turbo whistle through the exhaust, and 4 weld beadlocks on drag radials. I would of never known pulling up next to it lol
Ive seen lots of people with welds or slicks on a cammed only silverados lol
@@2-meanls3s56yea just because it had welds dont mean its fast.
@@midnight347 i have welds on my 16 f150 but atleast i make 700 to the wheels on a gen 3 coyote engine with a on3 turbo set up lol
Was holding out for Whipple to release the Gen 6 3.0 whipple for the 2021 and newer trucks. This might be a great alternative.
Great video awesome truck Ford power forever baby getting it done
Gnarly setup✅💨
Love the video man
Way to many people just talk peak numbers
That’s not what makes a quick car
Omg thats a unit.
WOW ! I can't believe this is with a stock drive line...crazy !
Upgraded brakes are a must with this much power.
Glad to see you back Ken. Bad azz f1fiddy for sure!!! 🤘🤘🤘🤘🤘🤘🤘🤘
🤔🚫🧢🎬💯💪🥶👿🚐💨🚐💨
Hit the track!
Beautiful kit and install! Props to the guys who know what they're doing! My only concern and question would be, heat shields for the turbos?....all that heat is going to rise.....
Hello. The turbo placement is in a place that protects the cab from heat, so a heat shield is not needed. No worries!
Need this on my 2024
Holy crap!!! Wow
love the setup..my question is with the rerouting kit for the turbos would that keep the turbos safe if you got into some rain or puddles to prevent them from taking in water? Im looking into one of these trucks down the road so id be daily driving it more then not so im just curious how that works thank you.
Damn i need this....
No wet weather driving, unless you have the extension tubs sucking heat?
PALM BEACH DYNO LEGIT!! Daily driver no issues plenty of power with one of HELLION TWIN TURBO kit these 2 companies make it happen no bs all real 100% 😎
holy crap !!!!! awesome for a stock truck ,, i want that kit for my 16 f150 ....
It fits 2015-2023!
How about a 1997 dodge ram 5.9l v8? Will this work?
Wow not too many sports cars could keep up with that F-150!!!!
5.4sec 60-130 is mighty impressive for a Ford F-150!!! Just Wow!!! I am impressed. What boost level do you recommend that people daily drive this setup at? 16psi boost????? Your road test was at 18 correct?
I am blown away. When I get my next F-150 I will have to decide whether to go 5.0 V8 Coyote or hybrid with twin turbo V6 and go with your turbos!!!! Thanks
I'm assuming it's catless? Just needs a true dual system to let it really breathe! Is there any kind of shields available to keep the air filters dry in case it rains?
Atta boy! Way to get in the game!!
Could you do a dyno with the turbo intake plumbed to the airbox? Also any issues on a truck with 3/5 lowering kit with low hanging stuff
1.5x 60’ on the street is freaking unreal.
Love to hear this with a borla or corsa catback.
Its a great kit id leave it around 700hp on a stock motor cause the trans and diff / drive shaft will be the weak points not to mention the rods .
2 Questions whats the installed cost and Id like to see the dyni numbers on an awd dyno.
Gotta give it to the Ford Engineers too.
Great video. Hey humour us Chevy guys, do a corvette or camaro. Other shops that specialize in GM products actually do Mustangs, Raptors, and even TRX’s. If u did one before my apologies. ❤❤❤
This thing would be a great no prep racer. It grips and goes. I'd go fully built iron block and bullet proof everything.
I wander how much that would cost
lol 😂 “Iron block” the fastest everything is aluminum block.
Iron block Coyote is about 5200.00. Its not needed that block has yet to break and they are pushing over 2800HP on it.@@jayknight139
Get an ffre/RPG/tkm longblock if you want a bulletproof 5.0/5.2. There are no iron coyotes; completely unnecessary in 2024.
Subbed!
Bust out the pocket book folks. Time to spool up.
Nice video!! How much to get this kit installed?
Beast
What are concerns with the air filter locations?
Looks like a killer package. Only problem I see is the location of the intake. I'd definitely have to run some plumbing to a higher more forward location for the filters.Behind the front wheels wouldn't be good where I live. They be more like jetski intakes here.
Totally agree. Couldn’t drive it in the rain.
You guys obviously didn’t watch the whole video. Ken stated that the kit comes standard with piping that runs all the way up to the factory airbox.
And besides, running the turbos and filters down there has no issue with driving in the rain as Hellion has countless customers who have the similar style kit on their mustangs and hemi cars with zero issues.
Hello. The kit comes with piping routed all the way up to the factory airbox, and there is an option to just have the filters on the turbos direct. The choice is yours, so no worries! The kit is designed for all weather conditions, no matter how extreme.
KUDO'S PALM BEACH DYNO!!!
Respectfully, Seth
Thank you!!!
I’d be interested in this kit how much does it cost?
What would i need to put for mine to handle this like supporting mods or fuel system
What suspension kit is installed on the truck?
would this kit be good in all weather areas ? Rain n snow ?
Would love to find the greatest amount of torque this set of turbos makes. I tow with mine.
🤯
Me want!
damn, I need that kind of positivity in my life! Please tell my wife!
Can you drive this in the rain, getting the filters wet?
No oil pump gears?
what gears was the pull in. It wasn't in 7th gear which is 1 to 1. It's been proven the 10 speed doesn't last long in the 850 plus range
How do these turbos handle water? What if it is raining or you hit a puddle?
This setup or a vortech for reliability, longevity and daily driving?
I’d only get rid of the stock catback due to its weight. Sounds beautiful tho
Port the OEM manifold
Only thing I would change is air filters being plumbed higher into the engine compartment. With water and dirt they will clog up fast
Hellion already has that, standard.
Besides, turbos being down by the transmission is just like their sleeper kits for the cars with no issues.
@@hoytdutton4926 if you try that in the rain it's gonna be fun
The turbo's on this truck are in a spot that will get water in them if you go through a deep puddle in the road, filters that are on them in this video won't stop water from getting in them
So cool. Unfortunately, I live in California. Is there any way I could hook the stock intake back up and periodically change the tune for smog checks? I noticed you said it is still a cat-back setup.
Better to go with a Whipple supercharger if you live in CA. You could still make 1200hp
Can be run in wet weather without fear of water ingestion?
Any idea on a black park price ?
What’s this kit running for manifolds? Fabricated or stock?
Is Rolling Antilag an option?
How would this setup be approximate, I'm thinking about selling the 03 cobra and getting into something cool like this
Did i miss the tireand wheel size? I know 20s, but whay width and tire size? Thanks
What 2 step setups are you running on this?
I know this would fit a 23 model but would it be tunable ? Other that good video, that truck is crazy 🔥.
2023 is tunable
Can you tune my Gen3 10r80 coyote swap its an 150 motor running power by the hour gt control pack so idk what all was done to make it work with F150 motor but I want to turn off the IMRC and add 18 gt manifold and cold air and e85. Thanks
Question, can you twin turbo an fp700 truck that has a wipple on it?
Why not run those pipes if it keeps it dry, and still cooler ?
Do you have kits for F250 single cab 4x4 2023?? Whats a ball park?
what size rims are those? need some for my f150 lol
When will the 2024 F150 be tunable?
What watch are you wearing? Looks sharp😊
Tag smart watch
Ever build a 5.4 2v for a 2nd Gen L?
🔥🔥🔥🔥🔥
Exposed air filters under the truck?! What about when it rains?
Where did your customer purchase his F150?
Fastest home depot vehicle ive seen
I have a 2019 Kia Stinger GT2 and bought it before I saw Cleetus's F150 and regret getting the Stinger.. but I cannot find a 4x4 f150 with the 5.0 at all... all I find is RWD. Thinking of buying a RWD and converting to AWD (Im in the PNW)
Just be patient find a 5.0 with the spec you want with 4x4...theyre out there trust me.
Powerboost option??
Bottom of car mount? Is that a good choice? Takes the daily driver out of it with exposed turbos and air filters especially rainy days or water puddles
The kit comes standard with piping to run to the factory airbox.
Besides, street driven Hellion vehicles have had zero problems with filters down by the transmission.
Hello. The kit comes with piping routed all the way up to the factory airbox, and there is an option to just have the filters on the turbos direct. The choice is yours, so no worries! The kit is designed for all weather conditions, no matter how extreme.
Curious how this compares numbers wise to the factory or dealer installed supercharger. A mustang would be fun but a single cab pick up is more practical for my needs
Psi per psi, Turbo > Blowers
The dealer-installed supercharger is pretty bad compared to when we do it because they are limited with the canned tune which has a low speed limiter, rev limiter etc.