I also just got my Joyor S10-S from Amazon. I'm following your waterproofing advice, and I may add more of my own. It's December in Wisconsin, and, yes, I plan on riding in the snow 😂
@@DavidsHowtosReviews hey David how are you I just got back my new motor for my joyor s5 but wen I fit it all up back now the bike only going 13 mile per hours no faster and I no it’s faster than that can u plz tell me what’s the cost of that
Yeah man I’m not that worried about my wires getting wet or something shorting out because I don’t ride it in the rain but I do go over puddles sometimes but I don’t really think that’s a really big deal to me. Maybe you think different… definitely try to avoid it though. The small puddles.
I've watched each and every single one of your videos man wanna say you indeed do and amazing job please them videos coming. Secondly would really like to know where can I find any parts for a Joyor S5 ie. My brakes are done and my safety lock has broken off any advice would be greatly appreciated thanks in advance👍
Check these sites And keep in mind they use generic parts vigscooters.com/product-category/parts/ www.voromotors.com/collections/electric-scooter-parts-and-accessories roadrunnerscooters.com/collections/parts-and-accessories
ive noticed my joyor y6-s has some sort of white wax between the cables i think they did it themselves ive just sealed the plastic part and those holes, thanks for the helpful guide!
I also put ultra black inside of the some of the clips and then I clip them together I took your word for it. I don’t know if I was supposed to put actual black inside of the clips or the other stuff that you had in your video or ultra back is fine.
I really need a tutorial on bleeding the brakes and installing brake pads because soon I’m going to need back brake pads because I just took the back brakes off just to see how my brake pads look and the top of my brake pads look like they’re getting really worn out and the brake lever you have to pull it in pretty far in order for it the back brakes to engage the the front brakes soon as you touch the front brakes lever I just want to lock up my back brakes used to be like that but not anymore and I know why now but I wanted to know if you can make a video on it that would be helpful. Thanks….
Yo lo compre. Luego de 1 Mes presento problemas. Cuando precionaba el pulsante de la velocidad me pasaba electricidad costantemente. La rueda que deberia adaptarse a cualquier tipo de suelo se revento internamente.(a pesar de que soy super cuidadoso con mis cosas. Nunca hice saltos ni nada. Solo manejar por lugares limpios.) La bateria que deberia tener una autonomia de 50km luego de 2 viajes de 9km (total 18km )a 25km ya estaba muriendo. Y la velocidad bajaba de 25 a max carga pasaba a 20 en el 2do viaje. Lo mande en asistencia tecnica porque se negaron a hacerme el reembolso!!! Y demoro 1 mes.!!! Hoy acaba de llegar. He visto marcas que no tenia antes. Una de las luces esta totalmente destrozada!!! Hice un viaje de prueba y parece que la bateria funciona bien en rendimiento pero ahora en la parte delantera de la batería con cada hueco aue encuentro en la carretera aun si es minimo. SUENA MUY FEO. Es un sonido incomodo. En resumen lo mande para que lo arreglen y regreso con otro problema y los de la asistencia tecnica ya no responden!. Procedere con la via legal por estafa. Quiza no logre nada pero lo intentaré.
Hey man, I know I’ve been bugging you a lot about the scooter, but I wanted to know if you can make a video on how to bleed the brakes and change the brake pads on front and back
It is exactly like hydraulic mountain bike brakes There is very good how to videos on it I don’t want to touch mine because they work fine I have told a few viewers about it and they had good results Check this video out ruclips.net/video/7spWdnrdyE4/видео.html
Thank You for sharing your expertise I would like to know how to expand my scooter I watched your video on folding using a screwdriver I need the opposite I can't ride my scooter Because the handle bar stem will not lock click in place it is too difficult for me it collapses any suggestions or demonstration I will not be folding it so will not deal with this problem
It took 3 people to get it locked in place for now not going to fold it because that was really hard I was able to get it working because of your expertise Thank You Much🏅
That’s crazy There has to be something squashed between the stopper and the pivot Yea wait till winter to mess with it this way you can enjoy it for the summer
The wires that control the front motor on my S 10 S electric scooter the little plastic adapter with the really thin wires. Could that be the reason why I have a code and code saying e-11 because of the plastic adapter for the front motor.. I did checked the green, yellow and blue one and I did not say see nothing wrong with them, but I did not check the little plastic send wire one
David, I have an S10 dual motor for about 2 weeks now. Put 59 miles on it already. The REAR motor seems to make a ticking noise relative to speed. It doesnt seem to be a brake pad or caliper issue. Any idea? Still goes 40 miles an hour. Thanks
Check all the bolts to make sure they are tight U can isolate it by taking pads off brakes and see if it makes sound Then put in a bench and try it see if lack of weight stops the noise If so then possibly a bearing
@DavidsHowtosReviews it is on a crate so lack of weight doent help. I took video on my phone. Just dont know how to get the video to you. Thanks for taking the time to reply.!
RUclips doesn’t allow that anymore I’m going to say it sounds like a internal bearing or something. There is really nothing you can do Just use it till it stops working The get new rear motor. It’s possible it will stop after a while
Because the front motor works and then it does not work. It works for a little bit of the time and then the code pops up and then I’ll let it sit for a couple hours or until the next day and it does fine and then the cops back up. Again?
So seal the front cap, 8 screw holes underneath, where wires enter the deck and light covers would that be a serious improvement in resistance?, I don't want to touch the controller or wires till I have to
Hello Dave how are you today my friend? I have a question about the joyor s10s. I want to upgrade my handlebar stem. Can you give me the specs please? Because I ordered a normal mountain bike stand and it did not fit, the new one slid right down the center tube lol need help 🆘
Check these three sites for something vigscooters.com/product/zoom-hydraulic-brake-lever-left/ www.voromotors.com/collections/electric-scooter-parts-and-accessories roadrunnerscooters.com/collections/parts-and-accessories?page=12
There is a comment on one of my videos someone put what all the codes mean, but I don’t remember that video Sorry for that. But I would definitely check all the wire connections. In battery box and under display
I have an issue where I have to unplug the black wire from the display then plug it back in and the scooter thr line comes on the screen then I can turn it on
@@DavidsHowtosReviews cheers yeah that would be good idea, and i drilled lots of holes to that plastic thing that big box stays way cooler now e: i will put duck tape to cover them if i ever need to drive in rain, i try to avoid it tho
Hey man, a quick question a little while ago I was riding the scooter my S-10, S, and the big exit commission red light came on and then it disappeared for a really long time and then today I rode my SNS again and I was walking at the rocks by I did write it somewhere a little bit to in the rocks and the big ass commission light came back on, and it seem like it was cutting power and like it was turning off and then I let it sit for a little bit and then wrote it again and it disappeared and I don’t know what code it is because it comes and goes. I don’t know what that could be. Maybe I just need to send you the code when it comes back or write write it in the comments when he comes back
Have you or anyone else found a place to order spare parts, like bolts and brake pads and levers and plastic pieces? I can only find one for European customers that doesn't ship to the USA.
Hi! I got a problem with my Joyor s10. It was raining this day and I left my scooter under a small roof for a while. Later I saw water on my scooter and then I wanted to turn it on but it was impossible. I'm sure the water damaged the control/wires/battery. I opened front plastic to check what is going on over there. And yeah I saw a little water, wet wires, wet battery etc. I cleaned everything, I unpluged wires and I left it to dry. Do you think it will help somehow? Or should I take my scooter to service?
@@DavidsHowtosReviews yeah now I know bro but they supposed to do that I mean Joyor company. It is really weird, they didn't put silicone or whatever in the area where is electronic stuff..
@zeus3500 Yes I know I'm just a owner of two of these and just try to pass along what I've ether had trouble with or figured out before it was to late. Not like I could return them after a few months. But they have not been that bad for me I've heard worse from people about other scooters
Tried to replace the air tire with a solid one was too wide and hex screws didn’t hold it together and the scooter hoes only 16m/h maybe the tire was too heavy to spin it as fast as before….
Yes I been wanting to do video on that I had bought solid tires but when I felt how heavy they were I decided not to put them on Static weight is different then rotating weight and will slowly down the scooter or even keep it from going.
@@DavidsHowtosReviews that’s what I thought,the tire was like 1300 grams 3 pound even on the highest speed settings was going only 16m/h…..solid tire not going to work with this scooters…. Or just need a lighter one….hope I didn’t mess up any wiring it’s pretty straightforward…..
Ty you for the vid. Can you just tell me what material those "stones" are you used to reposition the speed controller? To get the extra cooling and so it does not jump around.
These are MTB brakes and also all these parts are used from other manufacturers. Try these roadrunnerscooters.com/collections/parts-and-accessories www.voromotors.com/collections/electric-scooters
You will need to figure out what shorted out and replace that part Usually the controller (silver box) but can also be other things First disconnect the battery and dry everything out with a hairdryer and see if there is any fuses that are blown, then plug everything back together and try it You may need to charge the battery (outside in a safe location and see if the battery didn’t short out also.
thank you for the reply!! i would also like to ask if i do block the front panel and the lights without touching the cables inside, would that be enough to drive it under the rain? even strong rain just not underwater ofcourse, about the lights as well u've mentioned in the video they should be sealed by those holes inside? thank you again!@@DavidsHowtosReviews
@shackled1800 If you can just ad a little sealer on the cables or the electric grease And just make sure the lights are sealed Then you should be fine Driving in the rain like u said just try not to go under water.
got it thank you!! last question i'm using a joyor y6-s what PSI do u reccomend for the front and rear tires? theres offroad tires on@@DavidsHowtosReviews
Do you recommend that I go inside of the scooter where the wires are and making sure that everything is a snug fit in tight and start zip tying things just to make sure nothing happens in the future with the wires?
Yeah, I’m not gonna mess with it if anything does happen that has to do with the wires I’m definitely going to make sure that everything is going to be secure and nothing is going to be moving around and everything is a really snug fit but hopefully nothing goes wrong that I need to do anything with the wires well so far at least except the light problem lol
@@DavidsHowtosReviews I have another question I’m sorry that I keep having questions left and right but when I am at top speed and holding it there all the way open throttle, it feels like the power is cutting out but it’s still doing the top speed, but it just feels like the power just cuts out and then it cuts back in like really really fast like you would feel the scooter jerking like the scooters like turn it off on off on off on really fast I don’t really think it’s a big issue because it is doing his top speed but I just wanted to know your opinion on this… and another thing is when you recommend to fill up my tires to 50 I couldn’t do it. I was scared that the tire was going to pop. I only put 40 in there and the tire and it still seems to have a wobble when I go. Top speed. 😭😭
@@DavidsHowtosReviews but the thing is, I did drop the scooter twice going around to turn after it just rained lol 😬😢.. so maybe something spent like the brake disc that’s the only thing I can think of right now
Sounds like it’s hitting a speed limiter Because then when imported I think after a certain speed it gets classified as a motor vehicle not a scooter Your tire should have the recommended PSI Mine is 50 Only think I can think of is make sure you lean back a little
Hello, Do you think you could help me? Please! I just purchased the S5. The battery display showed about 90% full when I first turned it on. I took it for a ride. I put it back on the charger to charge to full (it was about 80%) full when I recharged it. Woke up this morning and now the display shows it low and in the Red My charger light was red when I plugged it to the scooter and after about 5-6hrs of charging it showed Green light How did my battery display show my battery is low after charging? It was almost full before charging Thank you!!!
So I have a joyor s10 and I broke the swing arm on it So do you know we’re can I find a swing arm for it Or if I buy a used s5 and change the swing arm from the s5 to the s10 is that’s gonna work or it’s the same size pls let me know
As long as u have the option in the display Mine has it but my wife only wants the one motor You may need a bigger battery To get same range but not sure because I basically get same range to 1 or two motors working on the s10
Yes you should be fine I’ve rode mine in the rain just try not to go through deep water It would not be a bad idea to make a little water mud flap in back of front tire protect battery box
Worst e-scooter ever. Build quality for the price is good, but electronics and battery are terrible. I drive 28 km on full eco mode (up to 20 kmh) and battery dies . My controller got burned , i manage to repair it by myself cause support is terrible, and now 2 days ago my main display board (behind screen) burned and scootes is dead, on the other side i have old e scooter with 350w motor and 40% smaller battery than Joyor s5 and im still able to manage more kms on old scooter than on this chinese crap, good looking but only that
@@DavidsHowtosReviews is there any other way how you can take the speed limiter off and another thing is do you know the clamp that is adjustable for the handle bar height and keeps going down slowly the handlebars because of the clamp and I tightened it. I did everything possible to it to make it tighter and it’s not working. What do you recommend for that?
@@DavidsHowtosReviews yeah, I can try that I tightened it so much it’s starting to bend the actual stem that says the brand 👀 but it’s not going down lol
@@DavidsHowtosReviews I have one other question do you know anywhere or any websites that I can get the pieces in parts for the S 10 S scooter in the USA because the website that I found does not deliver here
I just ordered the s10 on Amazon, thank you for the videos. Great idea using silicone! I will be doing silicone for sure.
I still like mine. I’ve been bringing it with me to places instead of walking it’s great
I also just got my Joyor S10-S from Amazon. I'm following your waterproofing advice, and I may add more of my own. It's December in Wisconsin, and, yes, I plan on riding in the snow 😂
@@jeffschubert8485 what is your battery autonomy full charge with a speed of 25mph average
sick vid! youre the only one making videos on this sick scooter
Yea it’s weird
Hope it helps everyone
You have no idea. Thank you sir
I’m hoping my videos help everyone because there seems to be no information about these out there
Kinda weird
Todimart makes videos calls it the s- scooter check him out too
@@DavidsHowtosReviews hey David how are you I just got back my new motor for my joyor s5 but wen I fit it all up back now the bike only going 13 mile per hours no faster and I no it’s faster than that can u plz tell me what’s the cost of that
Yeah man I’m not that worried about my wires getting wet or something shorting out because I don’t ride it in the rain but I do go over puddles sometimes but I don’t really think that’s a really big deal to me. Maybe you think different… definitely try to avoid it though. The small puddles.
Yup as u can see on mine I do same thing
Have not had a problem
Some people are riding in massive rain and big puddles
@@DavidsHowtosReviews yeah, you’re right about that other lol
I've watched each and every single one of your videos man wanna say you indeed do and amazing job please them videos coming.
Secondly would really like to know where can I find any parts for a Joyor S5 ie. My brakes are done and my safety lock has broken off any advice would be greatly appreciated thanks in advance👍
Check these sites
And keep in mind they use generic parts
vigscooters.com/product-category/parts/
www.voromotors.com/collections/electric-scooter-parts-and-accessories
roadrunnerscooters.com/collections/parts-and-accessories
ive noticed my joyor y6-s has some sort of white wax between the cables i think they did it themselves ive just sealed the plastic part and those holes, thanks for the helpful guide!
they also added that foam to keep the console steady themselves
how did you sealed the plastic cover btw? I have my scooter for like 3 days but wanted to make sure no water goes into it
@@awepizza ive used seal 5552 black
@scorthyn you can use a RTV or gorilla tape
I also put ultra black inside of the some of the clips and then I clip them together I took your word for it. I don’t know if I was supposed to put actual black inside of the clips or the other stuff that you had in your video or ultra back is fine.
!
I really need a tutorial on bleeding the brakes and installing brake pads because soon I’m going to need back brake pads because I just took the back brakes off just to see how my brake pads look and the top of my brake pads look like they’re getting really worn out and the brake lever you have to pull it in pretty far in order for it the back brakes to engage the the front brakes soon as you touch the front brakes lever I just want to lock up my back brakes used to be like that but not anymore and I know why now but I wanted to know if you can make a video on it that would be helpful. Thanks….
You can found it. There are some tutos on RUclips
Yo lo compre. Luego de 1 Mes presento problemas.
Cuando precionaba el pulsante de la velocidad me pasaba electricidad costantemente.
La rueda que deberia adaptarse a cualquier tipo de suelo se revento internamente.(a pesar de que soy super cuidadoso con mis cosas. Nunca hice saltos ni nada. Solo manejar por lugares limpios.)
La bateria que deberia tener una autonomia de 50km luego de 2 viajes de 9km (total 18km )a 25km ya estaba muriendo.
Y la velocidad bajaba de 25 a max carga pasaba a 20 en el 2do viaje.
Lo mande en asistencia tecnica porque se negaron a hacerme el reembolso!!!
Y demoro 1 mes.!!!
Hoy acaba de llegar. He visto marcas que no tenia antes.
Una de las luces esta totalmente destrozada!!!
Hice un viaje de prueba y parece que la bateria funciona bien en rendimiento pero ahora en la parte delantera de la batería con cada hueco aue encuentro en la carretera aun si es minimo. SUENA MUY FEO. Es un sonido incomodo.
En resumen lo mande para que lo arreglen y regreso con otro problema y los de la asistencia tecnica ya no responden!.
Procedere con la via legal por estafa. Quiza no logre nada pero lo intentaré.
Hey man, I know I’ve been bugging you a lot about the scooter, but I wanted to know if you can make a video on how to bleed the brakes and change the brake pads on front and back
It is exactly like hydraulic mountain bike brakes
There is very good how to videos on it
I don’t want to touch mine because they work fine
I have told a few viewers about it and they had good results
Check this video out
ruclips.net/video/7spWdnrdyE4/видео.html
Thank You for sharing your expertise
I would like to know how to expand my scooter I watched your video on folding using a screwdriver I need the opposite I can't ride my scooter
Because the handle bar stem will not lock click in place it is too difficult for me it collapses any suggestions or demonstration I will not be folding it so will not deal with this problem
No
You need to just put your foot on the tail section and push as hard as possible
If it still doesn’t click there maybe something stuck in the groves
It took 3 people to get it locked in place for now not going to fold it because that was really hard
I was able to get it working because of your expertise Thank You Much🏅
That’s crazy
There has to be something squashed between the stopper and the pivot
Yea wait till winter to mess with it this way you can enjoy it for the summer
The wires that control the front motor on my S 10 S electric scooter the little plastic adapter with the really thin wires. Could that be the reason why I have a code and code saying e-11 because of the plastic adapter for the front motor.. I did checked the green, yellow and blue one and I did not say see nothing wrong with them, but I did not check the little plastic send wire one
David, I have an S10 dual motor for about 2 weeks now. Put 59 miles on it already. The REAR motor seems to make a ticking noise relative to speed. It doesnt seem to be a brake pad or caliper issue. Any idea? Still goes 40 miles an hour. Thanks
Check all the bolts to make sure they are tight
U can isolate it by taking pads off brakes and see if it makes sound
Then put in a bench and try it see if lack of weight stops the noise
If so then possibly a bearing
@DavidsHowtosReviews it is on a crate so lack of weight doent help. I took video on my phone. Just dont know how to get the video to you. Thanks for taking the time to reply.!
RUclips doesn’t allow that anymore
I’m going to say it sounds like a internal bearing or something.
There is really nothing you can do
Just use it till it stops working
The get new rear motor.
It’s possible it will stop after a while
Because the front motor works and then it does not work. It works for a little bit of the time and then the code pops up and then I’ll let it sit for a couple hours or until the next day and it does fine and then the cops back up. Again?
One quick question the two blue wires. What do they do? I think I seen online that I’m guessing that’s a speed limiter something like that
Yes was once one wire
If two it was cut
Idk what you mean bye that
@@angelboyette208 blue wire is limiter
Yours has been cut
So seal the front cap, 8 screw holes underneath, where wires enter the deck and light covers would that be a serious improvement in resistance?, I don't want to touch the controller or wires till I have to
That would be a good starting point
It would protect the battery also the way too I think
Hello Dave how are you today my friend? I have a question about the joyor s10s. I want to upgrade my handlebar stem. Can you give me the specs please? Because I ordered a normal mountain bike stand and it did not fit, the new one slid right down the center tube lol need help 🆘
Check these three sites for something
vigscooters.com/product/zoom-hydraulic-brake-lever-left/
www.voromotors.com/collections/electric-scooter-parts-and-accessories
roadrunnerscooters.com/collections/parts-and-accessories?page=12
If you can’t find something I can measure next week for ya
@@DavidsHowtosReviews thank you bro
David's I have a jeweler S10 that doesn't turn on.
Check all the wires and connections
In back of the display
one question if the scooter runs for a certain time and then it gives me error 05 and turns it off. do i have to change the controller? Help plis 😢
There is a comment on one of my videos someone put what all the codes mean, but I don’t remember that video
Sorry for that.
But I would definitely check all the wire connections.
In battery box and under display
I have an issue where I have to unplug the black wire from the display then plug it back in and the scooter thr line comes on the screen then I can turn it on
do you have the link for screw on cap? I can't find it in your shorts
what u think about putting hot clue on where wires going in to boxes or connectors?
e: and thanks for vids man!
Nah you need something that will be able to have more liquid consistency
Then turn into rubber
More like liquid electric tape
@@DavidsHowtosReviews cheers yeah that would be good idea, and i drilled lots of holes to that plastic thing that big box stays way cooler now
e: i will put duck tape to cover them if i ever need to drive in rain, i try to avoid it tho
Hey man, a quick question a little while ago I was riding the scooter my S-10, S, and the big exit commission red light came on and then it disappeared for a really long time and then today I rode my SNS again and I was walking at the rocks by I did write it somewhere a little bit to in the rocks and the big ass commission light came back on, and it seem like it was cutting power and like it was turning off and then I let it sit for a little bit and then wrote it again and it disappeared and I don’t know what code it is because it comes and goes. I don’t know what that could be. Maybe I just need to send you the code when it comes back or write write it in the comments when he comes back
Have you or anyone else found a place to order spare parts, like bolts and brake pads and levers and plastic pieces? I can only find one for European customers that doesn't ship to the USA.
Only this one right now and I have not tried to by anything a viewer sent the link to me
vigscooters.com/product/zoom-hydraulic-brake-lever-left/
Hi! I got a problem with my Joyor s10. It was raining this day and I left my scooter under a small roof for a while. Later I saw water on my scooter and then I wanted to turn it on but it was impossible. I'm sure the water damaged the control/wires/battery. I opened front plastic to check what is going on over there. And yeah I saw a little water, wet wires, wet battery etc. I cleaned everything, I unpluged wires and I left it to dry. Do you think it will help somehow? Or should I take my scooter to service?
Yea let it dry
Plug everything back in and see if the battery needs to be charged
Hope everything is ok
@@DavidsHowtosReviews after drying still nothing. Controller was destroyed so I ordered new one. :)
@zeus3500 water proof the next one so you don't have to worry
@@DavidsHowtosReviews yeah now I know bro but they supposed to do that I mean Joyor company. It is really weird, they didn't put silicone or whatever in the area where is electronic stuff..
@zeus3500
Yes I know
I'm just a owner of two of these and just try to pass along what I've ether had trouble with or figured out before it was to late.
Not like I could return them after a few months.
But they have not been that bad for me I've heard worse from people about other scooters
Tried to replace the air tire with a solid one was too wide and hex screws didn’t hold it together and the scooter hoes only 16m/h maybe the tire was too heavy to spin it as fast as before….
Yes I been wanting to do video on that I had bought solid tires but when I felt how heavy they were I decided not to put them on
Static weight is different then rotating weight and will slowly down the scooter or even keep it from going.
@@DavidsHowtosReviews that’s what I thought,the tire was like 1300 grams 3 pound even on the highest speed settings was going only 16m/h…..solid tire not going to work with this scooters…. Or just need a lighter one….hope I didn’t mess up any wiring it’s pretty straightforward…..
You should be fine
Color everything so you know where everything goes
I put yellow with yellow green with green blue with blue and goes only 16m/h
Could you send all your p settings now my battery state changed from eco to normal checked all the connections all the cables still goes only 16 m/h
Seal any thing open with clear Is liquid nails
Ty you for the vid. Can you just tell me what material those "stones" are you used to reposition the speed controller? To get the extra cooling and so it does not jump around.
The black pads?
That’s just foam rubber
Do you have any link where I can get joyor s5 break pads for both front and back wheels?
These are MTB brakes and also all these parts are used from other manufacturers.
Try these
roadrunnerscooters.com/collections/parts-and-accessories
www.voromotors.com/collections/electric-scooters
@@DavidsHowtosReviews do u have a link for them on Amazon?
@@DavidsHowtosReviews can’t find them on this site you gave me
Hey I have a s10s electric scooter, and is throwing a code E- 11 idk what is mean
Any idea if it's safe to use a 3rd party charger (for the S10) that goes above 2A?
From what I understand it uses a generic charger
Hello from Kazakhstan,can you advise me please what is written one the batteries .icr or inr ?
This is the battery
vigscooters.com/product/23ah-lithium-ion-battery-pack/
what can i do if my broke becuse of watter and can i fix it
You will need to figure out what shorted out and replace that part
Usually the controller (silver box) but can also be other things
First disconnect the battery and dry everything out with a hairdryer and see if there is any fuses that are blown, then plug everything back together and try it
You may need to charge the battery (outside in a safe location and see if the battery didn’t short out also.
can i send u pic somewhere what i did to my plastic cover, i think its working very good in dry conditions
can u show me that ?
are there any wires to cut on the jot or s10 to make it faster?
Maybe the blue
I’m not sure
question what are those grey things uve used to keep the controller steady?
Just foam blocks
U can even use the white ones u get in packages
thank you for the reply!! i would also like to ask if i do block the front panel and the lights without touching the cables inside, would that be enough to drive it under the rain? even strong rain just not underwater ofcourse, about the lights as well u've mentioned in the video they should be sealed by those holes inside? thank you again!@@DavidsHowtosReviews
@shackled1800
If you can just ad a little sealer on the cables or the electric grease
And just make sure the lights are sealed
Then you should be fine
Driving in the rain like u said just try not to go under water.
got it thank you!! last question i'm using a joyor y6-s what PSI do u reccomend for the front and rear tires? theres offroad tires on@@DavidsHowtosReviews
how many amps is the controller on s5, and how wide are the magnets in the wheel
I know it’s 60v
amps I don’t think that would apply that would before the battery
Magnets I don’t know
aaand do u put plug first on scoot or to wall, im bit confused witch order is right
Wall then scooter
@@DavidsHowtosReviews cheers man owners manual said scoot first lol did some googling and found out its wrong
It is an electrical scooter. Why you want to submerge it anyway?
Believe it or not
Some owners think they can and have done it
Do you recommend that I go inside of the scooter where the wires are and making sure that everything is a snug fit in tight and start zip tying things just to make sure nothing happens in the future with the wires?
No as long as nothing is wrong with the scooter don’t mess with it
Yeah, I’m not gonna mess with it if anything does happen that has to do with the wires I’m definitely going to make sure that everything is going to be secure and nothing is going to be moving around and everything is a really snug fit but hopefully nothing goes wrong that I need to do anything with the wires well so far at least except the light problem lol
@@DavidsHowtosReviews I have another question I’m sorry that I keep having questions left and right but when I am at top speed and holding it there all the way open throttle, it feels like the power is cutting out but it’s still doing the top speed, but it just feels like the power just cuts out and then it cuts back in like really really fast like you would feel the scooter jerking like the scooters like turn it off on off on off on really fast I don’t really think it’s a big issue because it is doing his top speed but I just wanted to know your opinion on this… and another thing is when you recommend to fill up my tires to 50 I couldn’t do it. I was scared that the tire was going to pop. I only put 40 in there and the tire and it still seems to have a wobble when I go. Top speed. 😭😭
@@DavidsHowtosReviews but the thing is, I did drop the scooter twice going around to turn after it just rained lol 😬😢.. so maybe something spent like the brake disc that’s the only thing I can think of right now
Sounds like it’s hitting a speed limiter
Because then when imported I think after a certain speed it gets classified as a motor vehicle not a scooter
Your tire should have the recommended PSI
Mine is 50
Only think I can think of is make sure you lean back a little
Hello,
Do you think you could help me? Please!
I just purchased the S5. The battery display showed about 90% full when I first turned it on.
I took it for a ride. I put it back on the charger to charge to full (it was about 80%) full when I recharged it.
Woke up this morning and now the display shows it low and in the Red
My charger light was red when I plugged it to the scooter and after about 5-6hrs of charging it showed Green light
How did my battery display show my battery is low after charging? It was almost full before charging
Thank you!!!
Sounds like the battery is defective
Return scooter
@@DavidsHowtosReviews Awesome! Will do! Thanks for the advice. Have a great day!!!!
What’s thé recommended psi for the s5 tires?
50psi
So I have a joyor s10 and I broke the swing arm on it
So do you know we’re can I find a swing arm for it
Or if I buy a used s5 and change the swing arm from the s5 to the s10 is that’s gonna work or it’s the same size pls let me know
Go through the parts section
vigscooters.com/product-category/parts/
Is the s10 same as a titanic? Tx-3?
You think it’s possible to add another motor on the S5? I want to add one but I don’t know if it’s even possible haha
As long as u have the option in the display
Mine has it but my wife only wants the one motor
You may need a bigger battery
To get same range but not sure because I basically get same range to 1 or two motors working on the s10
@@DavidsHowtosReviews you think you can make a video on how it would look like to install a second motor even if you don’t get a bigger battery?
I just want to know if I can ride it in the rain, I’m not taking this thing underwater
Yes you should be fine
I’ve rode mine in the rain just try not to go through deep water
It would not be a bad idea to make a little water mud flap in back of front tire protect battery box
I've been to the car wash and I've never had any problems
You drove it through a car wash?
Post a video of that!
I would love to see that.
@@DavidsHowtosReviews
I washed it with a karcher (hand washing) but after 1260 miles I have to replace the throttle grip.
Maybe you can pack in some electrical grease to create a seal to keep water out.
why you cut blue wire..?
It’s keeps the scooter under a certain speed depending on the laws where u r
Cut it and u get top speed. I hit 48mph on flat ground,
@@DavidsHowtosReviews was jayor s5...?...can l do it on S5 too...?
Yes find the wire cut it
It maybe cut already
I believe flat ground the s5 should be 38mph depending on your weight and what you are carrying
@@DavidsHowtosReviews will chek it today and update it..... appropriate for your help...
Can I send you mine to water proof it?
Lol
U can do it it just take a few minutes
Worst e-scooter ever. Build quality for the price is good, but electronics and battery are terrible. I drive 28 km on full eco mode (up to 20 kmh) and battery dies . My controller got burned , i manage to repair it by myself cause support is terrible, and now 2 days ago my main display board (behind screen) burned and scootes is dead, on the other side i have old e scooter with 350w motor and 40% smaller battery than Joyor s5 and im still able to manage more kms on old scooter than on this chinese crap, good looking but only that
Where the videos 👀😭🥲
What are you looking for?
What video
@@DavidsHowtosReviews is there any other way how you can take the speed limiter off and another thing is do you know the clamp that is adjustable for the handle bar height and keeps going down slowly the handlebars because of the clamp and I tightened it. I did everything possible to it to make it tighter and it’s not working. What do you recommend for that?
Can you make loose and put something thin in to take up the space then tighten it?
@@DavidsHowtosReviews yeah, I can try that I tightened it so much it’s starting to bend the actual stem that says the brand 👀 but it’s not going down lol
@@DavidsHowtosReviews I have one other question do you know anywhere or any websites that I can get the pieces in parts for the S 10 S scooter in the USA because the website that I found does not deliver here
SCOOTER REPAIR. An asian boy
I am a mixed mutt!
I am like the UN 😂🤣👍