Kriesler 11-7 Radio Restore - Where there’s smoke there’s fire
HTML-код
- Опубликовано: 5 фев 2025
- This week I restore an early 50s Kriesler radio, this was a very popular set in its time. Although it looks good on the outside it holds some surprises when the cover is removed and luckily the owner decided to get it checked out before plugging it in, it could have been a disaster with a latent fault lurking inside.
Check out Carl's Capacitors eBay store home of the all black capacitors. Once you've tried black you can't go back: www.ebay.com.a...
Music: www.bensound.com - www.epidemicsound.com
I use post it notepad sheets to clean out the speaker gaps, fold it with the sticky sides back to back and work it into the gap, helps grab onto the dirt in the gap.
That is an excellent idea olradguy, I will use that in future. I just did a speaker a few days ago and used masking tape so don't think I didn't listen to you, good one 👍😃
@@DavidTipton101 I have tried masking tape also, but found it was too sticky to get into the smaller gaps easly but post it's work good. Greetings from Ohio, collecting & restoring for 50 years.
Great tip, thanks!
Blimy David.. getting started without a circuit diagram.. If that had been me, I'd have been like a one legged bloke in an ass kicking contest.. Brilliant and exacting piece of work as always..
G'day Pete, Yeah I thought I would get a schematic no worries but all I could get was a 1947 one that bears little resemblance to my radio. thanks for your comment 😅
Wow!!! Dudes dedicated! Knows his stuff! Does perfect work!
Thanks Francis, I am only learning radio servicing as I go but hopefully getting better with time. Cheers 🙂
I truly enjoy watching you work David. I am an engineer for 3 small market radio stations, and the only tubes (valves) used in our FM transmitter are the 5CX1500A. I was trained in a time when everything was solid-state, except for the final power amplifier. Of course, transmission is different than reception in many ways. You are a true Master Crafstman. Very few people take the time to work the small details these days, it's truly a joy to see your restore these units. Have a great week, Sincerely, Randall Mann
That sounds like an interesting job GrouchyGuy, thank you for your comment 🙂
With these videos, you are broadcasting not only restoration expertise, but love, and passion too. Thanks a lot...!
Thank you Ilirjan 😃
F-a-n-t-a-s-t-i-c job David... again. Great voice over and music. Top job how you dealt with the broken potmeter-switch. Jealous on your skills. Regards again, Ruud, Holland
Hi agin Ruud, Hi to Holland 👋 visited there 2 years ago, wonderful country 👍😃
it could well be reminiscent of a 1948 Cadillac
My parents had one of these when they were living in Woomera in the '50s. A good fringe set. Great video.
Hi HG80335, they were a very popular set and for good reason, I'm not sure I would want to be at Woomera in the 50s... Yikes! 😀
Some interesting old radios there. Congratulations to Mrs Tipton for joining in with your hobby. My long suffering wife loyalty accompanies myself as I drag her (not literally of course) around yet another transport museum or classic bus rally and so forth. Occasionally she gets to play clippie if I take a vehicle along which she enjoys. Well done for sorting this one. Nothing worse than following someone else’s work especially when it’s less than thorough.
Hi Gary, our poor wives, what they put up with. Thank you for your interesting comment 🙂
Very interesting David. My first job was at Kriesler Newtown from 1957 while I completed a part-time radio engineering course. I later spent many years designing lift control systems and finally as a freelance technical writer. I had several Kriesler radios and TVs, spare components, circuits and , all now passed on to a service guy in Newcastle.
Hi cfisherau, thank you. It would have been interesting working at Kriesler back in the day, cheers 👍🙂
I agree with many of the comments. Another beautiful job David and I bet the owner was over the moon with the result.
Hi Graham, he was very happy and able to watch it done on TV too. Thanks and cheers 👍😃
I know this video is a couple years old but I had to add my congratulations and say that the Kriesler sounds really clear. What a nice radio and what a nice job!
Thanks Jeff 😀
This radio sounds really clear and mellow. As usual the appearance looks mint. Thanks for another interesting video.
Hi birdie399, thanks, I think Kriesler made a bit of effort with the sound 🙂
This guys the real deal. So rare to see the real deal this guys it.
Thanks A.R. Fifteen 🙂
I just came across your videos as a result of a quick search. I was just donated a Philips RF5 Radiogram with turntable and microphone for singing along. It's my first project and very much looking forward to making it work. Most grateful for your insights and tips.
Hi Simon. I did two RF8 radiograms which are later than yours but similar in design, they were fitted with Philips turntables not a Garrard unit like yours. I will leave the links below. There was also a Silicon Chip article on the RF5 which may be helpful. I have also done a few Garrard units you will find on my channel and I have another I have just completed which will be put up in a few weeks. It will be in part two of a HMV gram I did. Good luck with your project and ask if you need assistance 👍🙂
Links:
SC: messui.polygonal-moogle.com/valves/SC200701.pdf
RF8 Video 1: ruclips.net/video/c9rtlrLW7ZM/видео.html
RF* Video 2: ruclips.net/video/acAxucB5-Ow/видео.html
@@DavidTipton101 hi David. Thank you kindly for the information. Am planning on upgrading the speakers and perhaps even adding a Bluetooth module. I know this might be against the “code” but I think it’s worth a stab to see how things pan out. I would very much appreciate your assistance on 2 issues. Is there a better way to contact you than via here?
@@jatflash sure, vintageradioaus (at)gmail.com
Dave, I’m really enjoying your videos. I grew up with Kriesler radios. I had a plum pudding sans case on my bed head at about age 10 when my passion for electronics took off. I have the radiogram, the bread loaf and several plum puddings, including a white one, and the newer triple throat with the knobs on each end all awaiting restoration. You have inspired me to get on with it. Sadly, at 66 I haven’t retired yet so time is of the essence. Meanwhile I’ll keep watching and learning. Thank you.
Hi Robert, thank you. Kriesler seem to produce a better class of radio than some. I have at least one Bread loaf I haven't look at yet, I think the one with the knobs on the side are a model 11-41 or close to it. Hopefully you can get to tinker with them when you do retire 🙂
Thank you David.. Fabulous video and real craftsmanship with your restoration. No stone un-turned! Thank you for the quality of your material and videos. Great to see these works of engineering restored to this quality. Unwards and upwards!
Thanks David. An early video and still learning, I hope I have improved since then 👍🙂
Looks the absolute business and sounds a treat! Owner must've been delighted, I know I would be.
Hi Paul, haven't heard back from the owner but he was excited to pick it up, thanks 🙂
Hi David, a very nice restoration. A gentleman dropped off a lovely 11-9D console today which shares the same chassis so your video will come in handy. Thanks for another great video.
Hi Bruce, thank you. Your 11-9 is a nice radio, should look good 👍🙂
Another superb restoration David, well done!
Aww thanks moshe 😀
@@DavidTipton101
Bjguierrrt
Hi David from mike here in nz used to work for consolidated electronics industries back in the mid 80s aligning bell com radios marine radios long time ago cannot not remember the procedure but it makes me think back after watching you do it.
Hi Michael, It's nice to remember the old days 😀
Brilliant as always - thank you for posting your radio restore/repairs. Take care.
Thanks Steven, my pleasure 😀
A perfect restroration needs knowledge and dedication. Both are there.👍your videos make my day....🥰
Hi manoj, thank you 😃
Fantastic restoration! I had the same speaker issue with the Kriesler 41-23 I restored, but I didn't know you could use
clear plastic down the sides so I just ran it loudly face down for a few hours to work the dirt loose 😅
I thought about using felt but ended up using a modern dust cap, which I now regret. Lessons for next time! I might redo it at some point.
Thank you Nebby. You might find that smaller speakers like your Kriesler 41-23 don't have enough clearance to get a piece of plastic in the gap. Your method should work. If you have a signal generator you can use that on a low frequency to get a larger excursion of the cone. Old film negatives might fit into the smaller gaps too. Thanks Nebby 🙂
David I have always known the A is a linear pot and B is log.
Good video David as usual.
Thankyou
Hi Bruce, thank you. As I have come to understand, there is no standard lettering for pots and I suspect it is different in different countries, GB and US for instance. Modern pots we get here are mainly from China and are numbered A as log and B as linear. All very confusing 🤔
Totally amazed at the attention to detail. I have just been given the exact same model by my wifes grandmother. Needs a renovation if your interested 😁
Actually David. Is there anyone/anywhere you would recommend for a restoration? I am around the Bayside area in Brisbane. Cheers Ash
Thanks Ashley 😀
Send me an email at vintageradioaus@gmail.com
Very nice job! I like how you fixed the speaker looked original afterward. Everything turned out nice and the radio is back at it's peak for another many years!
Thanks Jammerk40, yes it's a very good radio and works well 🙂
David !!!!!!!!!!!!!!!!!!!!!
So good to see you back working your magic! This set was by no means junk, but you still managed to work magic with it.
Hoping you have a stash of many more to work on....love your videos.
I now have 2 Garod V Neutrodyne's here. Neither would work as is...one doesn't even have valves! Speaking of such, the ones used in this set are 01A's. I am going to have a heck of a time finding those! Not sure that my tester will even test them either...haven't found the tube tester either. Most likely I need to recap the tester too.
When I finally do start on the restoration of the Garod V Neutrodyne, I am going to do something with one of the cases that will probably make some people scream. I am going to take "everything" out of the case, clean the case, then sand it down and re-stain it to have a nicer case. The second one already looks great other than being a bit dirty. If you provide me with an email address I can send to, I will send you photos of the new one.
I actually have several things to work on...problem is lack of parts, time, and money!!! Don't know if my phone would do well enough to make a video for RUclips or not, can't afford a "real camera" right now. But maybe I will make a video of recapping the tube tester, my Hallicrafters 8R40, and the Garod's.
Again, glad to see you back at it! Looking forward to many more videos! Say HI to the wife too...and tell her I said THANK YOU so very much for allowing David to do this wonderful thing!!!
Hi Wayne, Thank you for your kind comments and I passed on your thank you to my wife for allowing me so much freedom to pursue my hobby, she's wonderful. If you haven't done so, maybe look for a radio club as they usually have a valve bank or know where you may get the 01A valves, a Google search may find some leads too. If you have extra valves you may not need a valve tester as you can shotgun problems by swapping valves around. As far as restoring the case I think you should do what you want, it's your radio. If you restore a vintage car you don't just get the motor running and put it on display. I'm reluctant to publish my email but there may be a way in RUclips that's just become available, I'll check that out. The phone cameras are great and give excellent results for RUclips. Cheers, David 😀
This looks like a radio 📻 fit for use in a restaurant, hence its “jukebox” like appearance. I remember eating out at a restaurant named “The Hub”, in my hometown of Glennallen, Alaska in 1978 for Mother’s Day. My parents, which are still living there, were about to be newlyweds. I do not remember if The Hub had a jukebox or not, or a radio like you restore. I remember the unique smells of the place. One ☝️ like food 🥘, one ☝️ like perfume of some sort. I enjoyed being here, but unfortunately, the restaurant burned down in the spring or summer of 1979, if I’m not mistaken on the year. This radio looks so worthy of such a restaurant, but only if it doesn’t burn down. This radio has a hint of the 1950’s and 1960’s, and hippies. Seems as if houses are styled alike, as far as this. Radios 📻 and houses go hand 🤚 in hand 🤚 I guess. Like the radio takes on the same generation or era as the house. I really like this radio. Too bad it isn’t a coin operated radio 📻 like the ones I told you about earlier. Also, this radio should have miniature 45’s inside. Better yet, this radio be the same size as a jukebox, with 45’s in it.
It won't burn down now, it works a treat 👍
Enjoyable nightcap. Thanks again David.
Thanks again Terry 😴🙂
Nice restore David. I've been enjoying your videos. It's a big plus to be able to fabricate your own parts also. ATB Doug.
Thank you Doug, the lathe is a recent addition and has been extremely useful. I put off buying one for 2 years but I came in grumbling about not being able to do something one day and my wife said "just go and get one for crying out loud!!!"... woohoo! 😉
A good lady indeed David, I would keep her. It's not just about having the lathe it's about having the skill to use it. Nice to watch a craftsman doing his thing. If you ever need to source something from the US please let me know and I would be happy to do that for you. ATB Doug.
Doug, thank you that's very kind. I've kept your name aside if I need something, Cheers 🙂
This man is amazing with these radios ! I have got a 1928 philipps radio , i wish he could get it working for me but i live in the uk . Brilliant video as always .
Thanks Andy, Your Philips radio sounds interesting, I wish I could have a go it it too 🙂
Watching your restoration videos like, watching a classic movie..... with love from Kolkata, India......
Thanks Kushal in India 👍🙂
Wow very nice complete restoration. What a beauty! I have never seen such a set here in the States, perhaps they never came this far.
Hi Jerry, Thank you. I would imagine Aussie made radios tended to stay fairly local as they were protected by government tariffs on imported radios. If exported they would not be able compete on price. The tariffs were lifted in the 70s and the industry collapsed.
Another great job David. Nice machining and attention to detail. Sounds great too! 73 de KB7ICI......Bill
Thanks Bill, I can't remember what I machined but these did have a good sound and were marketed as such 😀
I had one of these when i was a kid. Wish i had it now !! Great video post and as a retired tv teck well done. Personally i"m in the middle of restoring a AWA p1 television. Still with the original tube !!
Hi Stephen, thank you, that means a lot coming from a pro. There was an article in Silicon Chip from 2002 about restoring a P1, you've probably seen it but here is the link anyway: www.siliconchip.com.au/Issue/2000/July/The+AWA+P1+portable+11-inch+B-W+TV+set?res=nonflash
A very nice restoration! I am totally jealous of your capabilities and resourcefulness. Thumbs up!!
Thanks Dave 🙂
left the diodes in due to the lower awa transformer replacement , but the sound of it at end was impressive -good stuff love the old gear
Exactly, thanks willrobbinson 😀
Once again Dave, you have done an excellent repair/restore on that Kriesler radio. Pure gold. You make the troubleshooting and diagnosis look so easy. 2 thumbs up. :)
Hi RJ, thanks 👍👍👍 😀
I never thought id be into radios, but here I am, watching this video, the radio that started this was a philco model 70 that had I actually acquired through my job for half the asking price
It's a pretty interesting pastime that's for sure 😏🙂
VERY NICE 📻 radio collection. I forgot to tell ya that 📻 capacitors hold a charge, even when the 📻 radio is unplugged. I do 👎 not know if an isolation transformer can "ground", or "dump" this stored voltage. I 👌 know a shock from a capacitor can be potentially dangerous, especially in persons with ❤ heart problems. You can usually discharge capacitors by putting a screwdriver across the terminals, but, regarding these old 📻 radios, you want to properly discharge capacitors, if they're 👍 good, instead of ruin them. Sounds 👍 like ya have some 🔥 hot capacitors, which probably have gone ☝ up in value. Just be careful 👎 not to burn yourself, or be hurt, if the capacitor decides to explode. Also, be careful of starting an accidental 🔥 fire. Your friend, Jeff.
Thanks Jeff 🙂
Splendid job, as always. In the U.S. we've got Driscolls strawberries, too!
Thanks CogitoErgoSum SC. Driscoll's get around don't they 😄
At 1:04 to the right of, but right next to that garish greenish-blue boxy-looking set, the brown one! Yep, that's it! Our family had one of those for several years, a "Tasma"(Thom and Smith) brand set! That REALLY takes me back! WOW! Haven't laid eyes on one of them for AGES!
Ahh yes, looks like a Tasma baby. I have the 1001 model which was a basket case, no speaker, no valves, chassis bent in half and the case in three pieces. I rebuilt it and painted it black with a black and silver grill cloth, it looks and works great. I think Tasma used the same case before and a few years after the war. Your family had good taste 👍🙂
and this is what my parents had that lasted up until 1985 www.ebay.com.au/itm/Kriesler-RADIO-MODEL-11-9-Cream-Colour-Working-Retro-Vintage-Good-Condition-/113785079814
@neilforbes416 those type of radios that would come in all sorts of colours it be like take your pick 😆
I just love your channel, I have been binge watching your videos for several days now and sharing them on the radio group on facebook
Thank you ideal1980, thanks for sharing my videos too 😄
you sir, are a fine craftsman.
[ that, by the way, is a high compliment ]
Hi willi0000000, I don't know about that but thank you 🙂
Another well crafted repair. Restoration done right. Really enjoyed the video Dave.
Thanks Quantum Leap, I appreciate your comments 😀
I really enjoyed watching you work on the old girl, I guess I am now going to spend the rest of the day watching your other vids.
Hi Donk, don't do that, get out and enjoy the sunshine 😅
@@DavidTipton101 Sunshine? I'm in the UK and it is October :).
I am watching these type of videos to refresh my memory and provide inspiration before I attempt to strip my JVC SEA7070 graphic equaliser. The sliders and pots are silent but the toggle switches on the right are noisy and occasionally don't switch both channels leaving one with no sound, a little wiggle restores the channel so I am hoping it is just time and grime :).
Well that was a result. I accessed the switches, gave them a few squirts of Servisol and bingo, all working like new.
Good work Donk, Servisol fixes everything 👍😃
What a fantastic job David!
Thank you Paul 👍🙂
Brilliant work! Keep the videos coming!
Het thanks Andrew 😀
Nice work on the case and I liked your presentation.
Thank You jonka1 🙂
very cool radio and excellent rebuild/repair/ explainations,really helps a greenhorn out.thank you!
Glad you enjoyed it GT 😀
Beautiful job Dave. I used Brasso on a cabinet & it dulled the finish & I could not get it to shine again. Wound up repainting it.
I'm sorry to hear that Eugene, I wonder what the case material was? it couldn't have been Bakelite 🤔
Good 👍 Job David 👏 👍 👌, hope your doing well 👍!! I injoy your Videos 📹 😀 !!!!
Thank you Julian, I'm good thanks 👍🙂
When removing or fitting rimlock B8A valves, pop the spring clip down the skirt away from the pip on the glass with a screwdriver first.
This doesn't have rimlock valves 🤔
@@DavidTipton101 Oh dear, Septuagenarian Confusion Rules. Thanks.
Superb cabinet work. Great job. In my restorations, the cabinets are always cleaned up in the sink ... when my wife is t there, of course :)
"when my wife isn't there, of course" Good thinking EOaN, the other thing that tips them over the edge is heating parts in the oven, the smell goes away... eventually 😃
Thanks for that David. Very well done. I have a kriesler 11-7, built in 1948 which I want to refurb. I just need the schematic and source for the components.
Hi Ron, I'm doing another 11-7 as we speak. The schematics for theses Krieslers are a nightmare, there are something like 21 or so variations of the 11-7 design. You need to use the valve line up in your radio to determine the correct schematic to use and it is usually a base schematic with a list of addendums. There are circuit diagrams on Radio Museum, in the AORSM and here: www.tuberadio.com/robinson/museum/Kriesler11-7/
The quality of all the diagrams are woeful. Good Luck 🙂
Hi Dave! Another great restoration. You had not mentioned if you had put it back to tube rectifier. Probably the transformer had been replaced due to the rectifier tube shorting as was common with 6X5, 6X4 etc when pushed to the limits, so the diodes were put in place out of fear of burning another transformer.
Thank you Daniel. I left the diodes in there from memory. The B+ was low so a tube rectifier would have pulled it down lower 🙂
@@DavidTipton101 in that case you did well to leave the diodes in place.
impressive restoration David ,Greetings
Hi Manuel, thank you 🙂
Thanks David, another fantastic video from a couple of years ago now. A great guide for my current project, an 11-7 (version P).
I'm wondering if you, or one of your subscribers who may see this comment, have acces to an 11-7P schematic? I have a few of the 11-7 radio variants on my shelf, and the schematics to match, but only up to version H. Perhaps Kriesler gave up on amending schematics after that version.
I've compiled a spreadsheet with all of the valve variants over version updates. There are many subtle changes through time, and it is very, very difficult to determine which radio you are looking at. Thanks for the great radios Kreisler. Can't say the same about your documentation!
Hi Peter, I have the full amendment sheet up to 'U' Send an email to vintageradioaus@gmail.com and I will send it to you.
Beautiful job! Excellent technique and workmanship. Makes me want to redo some of the sets I worked on when I first started repairing them! Love the radio designs you've got in Australia, some beautiful dials.
Thank you a587g, I need to redo some of my early ones too, I expect there will be a lot "what was I thinking?" 😄 There are some nice Aussie ones for sure as in any country. I wouldn't mind getting some of the old Zeniths 😉
Amazing and inspiring! Among the very best I’ve seen on RUclips! I DREAM of learning and being this good some day! You don’t deserve 1.4K subscribers! You deserve 1.4 MILLION subscribers! 😊😊😊 Bravo! 👏🏻👏🏻👏🏻
Hi Steve, I was happy with one subscriber, my wife 😆 Thank you so much and I'm glad you enjoyed it 🙂🙂🙂🙂
I just ordered that degitech analog multimeter because of your videos ,I bought three heath kit vtvm tube mutimeters ,,,but until I get all the parts and cables for it the degitech analog meter seems to work for you ,Its a long trip from where you are to where I am in the USA ,but I look forward to get a meter from there.it great to learn from you thanks
Hi Ron, the meter is pretty good and a good price too. I have a VTVM too now but it's not required for alignment, the Digitech is ample. My VTVM is a different brand but is the same circuit as a Heathkit, it works very well after I replaced some caps 🙂
Another great restoration video David, this set certainly came up well and sounds really good.👍
Thanks glenz1975, it turned out a really nice radio 🙂
Once again a great job my friend
Thank you Emilio 🙂
Have a question my first time ordering a variack. The little red one 2000 volt wouldn't need anything with it. Just it to add voltage? Thanks for allways answering
@@EmilioGarcia-fr5po Hi Emilio, The Variac is used to control the mains supply from somewhere near zero volts to full voltage. Mine will actually go higher than the input voltage so up to maybe 250 to 260 volts from a 235 volt input. If you use a dim bulb which is highly recommended you may not need a Variac, you can control the voltage using various wattage bulbs. My Varic is rated at 500VA which means it can supply 2 amps at 240Volts. 500/240 = 2 amps. Most of the equipment I operate run at about 0.2 Amps. I hope that helps 🙂
Hi David, this was a first class restoration. I'm exalted from your pretty good work. I believe you are one of the best restorer (After me ;
Hi Werner, thank you, always happy to be number two 😆
@@DavidTipton101 😆
Great sound. Customer should should be very satisfied😉
Thanks Ken, I think he was 👍🙂
I am amazed with your work. Congratulations 👏
Thank you Paulo 😃
A pots are linear, B are log. At least here in the Netherlands ...
Good video.
Thanks Wilfred R, I always thought the reverse and my local electronics store label their pots as I said: www.jaycar.com.au/components-electromechanical/resistors/potentiometer/c/2AE?sort=popularity-desc&q The pot I used was from the UK, but I can't imagine there are two labeling systems exactly opposite to each other but I had a UK 'B' pot and it was definitely log 🙄
I second that. Great job as usual, David. Always impressed how you make these old radio's sound great again. And look great 👍🤝
I am a retired college art historian. I've heard a story (apocryphal?). There was a proto- renaissance artist and Giotto was his name. In the late 1200 hundreds he wanted to be apprenticed to an artist named Cimabue and Giotto drew a perfect circle. Obviously, he was apprenticed to Cimabue.
Hi Stanley, I'm glad I didn't have to draw a perfect circle for my apprenticeship, cheers! 🙂
Again - a super project. Thank you for sharing....
Hi George, Thank you 🙂
Hi again Dave. I know this is an older post, but you are certainly my latest Super-Hero!! :-)
Faultless, with regard to every aspect, once again, mate. Re: your "Problematic Schematic"....
Yes, there were a LOT of variations in Valve-LineUps, and more, for that 'Model' it seems!
I'm assuming you found/referred to the Model 11-7/11-9 info from 'radiomuseum.com'. ?
That was a slightly later model, whereby although the outside looks basically the same, the
external difference was that the 'SW' band appeared at the TOP of the dial indicator panel.
YOURS, is the older original 11-7, that had the 'SW' band at the BOTTOM of the panel!!
I found a Site, (had nothing else to do! hahaha..), that explains the differences, including tubes.
There's a lot of interesting info about 'Kriesler' on that page!! As well as links to schematics
at the bottom. The TOP one on that short list 'should' be the schematic for your Radio!!......
www.tuberadio.com/robinson/museum/Kriesler11-7/
It seems that yours is/was the original 1947 model. (Not the later 1948 or later?). Yes, it's
been previously modified by someone, including the Valve-LineUp.
Have a great day David! Now I'm back to your Posts!!!! :-)
P.S.
I originally thought that the letter 'K' on your radio had a broken off vertical bar on the left
side of the 'K' letter!! Obviously, it is not! :-)
Hi Glenn, I can't remember if I saw that page you linked or not. I was aware of the SW on the top or bottom and thought I mentioned it in the video, it may have been cut out of the video. Kriesler would issue a schematic then add written addendums as they changed the design or parts, they didn't mark the chassis to say what amendment level the chassis was either. It was very difficult to follow. I usually get the schematics from Radio Museum, this radio is listed in the AORSM as well 👍🙂
Hi came across your channel by accident and now have subscribed to your channel found it very interesting
Mike
Hi Micheal, thank you and welcome 👋🙂
Great background muzik. You have good taste in elektronik soundz. The radio turned out really nice. You do great work. Love to watch your vids. Thanks for sharing. Take care. 😉
Hi GaryPooh Sylvester, Thank you, finding suitable royalty free music seems to take longer that repairing the radios. I'm glad you enjoyed it 😀
Very nice restoration there David. The display in Canberra reminds me of the HRSA display at the library here in Bacchus Marsh some years ago. If you’re passing through sometime it might be worth visiting the blacksmiths cottage as they have a Marshman Music Master.
Hi Wenlocktvdx, I go to Melbourne every Christmas so I will drop in on the way to Ballarat. I have a Marshman radio I picked up in Geelong.
I think there is a photo of the Bacchus Marsh one online.
Yes, I think that one is the main one you will find online. Wenlock
It has the same dial as mine but mine is wider and has the speaker to the left of the dial. Link to the blacksmith cottage Marshman radio
www.cottageandforge.com/marshman-music-master-radio/
another masterful job.
Hi Vince, thank you 😃
What can one say, amazing and neat as usual. If only I could find someone like you to recap my Dual p1010 sv...
Maybe try contacting a local radio club Caius, they may be able to help or join a local radio Facebook group and post a request there. I'm in three groups and they are amazingly helpful. Thank you for your comment 😀
What a great job. The Brasso worked great on the case. I'm gonna have to try that on my Bakelites.👍👍👍👍👍
Hi WW, Brasso works very well, if it's faded try using a wax with carnauba, it will cover the faded look 👍
Nice work and great video. I have this same radio model but mine has the EL33 output tube instead. I believe the rectifier is different between these types also, mine is a 6X5GT. Nice radios and are certainly very nice sounding.
Hi Aron, Thank you. Mate, there were no less than 20 versions of this model with different valves, transformers and resistor combinations., I pretty much gave up and winged it. In the end it works and sounds really good 👍🙂
@@DavidTipton101 Very nice work and have subscribed to your channel.
Fantastic work you do...very amasing...thanks for good film so mush..all best from john
Hi John, thank you 👍😃
I would be most interested what was used in the original power transformer/rectifier valve configuration. In earlier days, transformers were rewound, but labour costs are prohibitive (been for some time). You've done a very thorough job, and certainly a very collectable and operational radio with many years of service ahead..
Hi jmcgatkinson, I only ever found the early schematic for this radio and an extensive list of modifications leading to the radio I have. The original rectifier was a 6X5 (octal base) but that was updated to a EZ82 (noval base) which is what I think was in this radio. I don't know what configuration the power transformer would be as far as the 6.3V windings are concerned as they often had 2 windings, one for the heaters and another higher current winding for the rectifier. Other Kriesler circuits of the same era had two windings of 6.1 volts. You are correct about transformer rewinding but I am getting two rewound at the moment by a retired gentleman for a reasonable price. Thank you for your comment jmcgatkinson 😀
I am a new subscriber. Enjoying your videos very much!
From the west coast of Canada 🇨🇦
Welcome Coolmarsh1dude, so happy you are enjoying the videos. We want to do a West Coast trip soon, we did the Eastern part last year. I've had a few viewers from Canada so far, Hi Canada 👋
Another of your great restorations. Are all Australian radio IFs 455kHz? In the UK they are anything from 450 to 470 kHz- depending on the manufacturer and sometimes even on the region - to minimise image problems. A top tip for SW alignment: I use a nearby SW digital radio to pick up the LO so you know you're not inadvertently peaking up on the image.
Hi Janet, thank you. 455kHz is the norm but there are variations of that as in the UK. I think I recall one being 457.5 or something 🤦♂️ That's a great tip on the short wave, I don't have such a radio but I could use an oscilloscope I guess 🤔
@@DavidTipton101 I doubt a scope will be useful unless it has a frequency readout. A cheap SW radio is a very useful piece of test gear. When at the top end of SW doing an alignment (where images are a problem), if the instructions say inject 15000 kHz you'll likely receive it at the real point and the image. If you tune the digital radio to 15455 kHz, you'll know when you're on the real signal and not the image because you can hear the LO on the digital radio.
@@janetwinslow2039 Yes, I meant use the frequency readout on the scope, I would disconnect it before making an adjustment though. The radio would be better.
This is a fun repair! I replace the 2 or 3 wax coupling capacitors at preamp and power amp stages as a rule before powering up. this saves a lot of hassle and lets me do a first power-up with more confidence.
I have the same Leader LSG-11 Sig Gen and I find it to be accurate enough without using a frequency counter to confirm the dial settings. The only negative comment I have is that it generates too many overtones which can be confusing, especially on the Shortwave bands. I'm thinking of doing a mod so that I can enable/disable overtones by having a bias shift switch on the oscillator tube to make the sinewave more pure.
I agree Derek and if I wasn't videoing it I would change those caps too but that would be no fun and it would hide the effect a leaky coupling cap has on the radio 😄 The tone on the Leader is a bit unclean and looks ordinary on the oscilloscope but overall works pretty well, if I'm having trouble I switch to the electronic generator. As always I appreciate your support, thanks Derek 👍🙂
Nicely done. Take care.
@@DavidTipton101 I thank you for these videos, I just found you and subscribed, excellent work and I learn a ton from you. I appreciate why you power up without generic recap first (for viewers like me), helps me understand what can be damaged, why and how badly old components effect the radio and related components. Thank you.
fabulous love your videos been hanging for more videos
Thanks Ian 😀
suas dicas de construção de peças e truques são incriveis mestre......obrigado
Obrigado Silvio 👍🙂
Holy cow, that's not restoration, that's a rebirth. I'd expect music and news from 1953 to start coming out of that radio!
Ha-ha... that would have been something Clint 😄
@@DavidTipton101 📻🎵👌
muy buen trabajo. se aprende mucho con sus videos. gracias
Gracias Luis, todos aprendemos algo que pienso, saludos
Great great really professionel Work looks like a Cadillac from the 50 s 👍👍
Ha-ha... I guess it does 😄
Superbe travail comme d'habitude , bravo !
Thank you Number 6 🙂
Hello David. I really enjoy your videos, and wanted to thank you for all the work you put into making them and uploading them. After watching this one, I have a couple of questions, before undertaking my own first restoration. Firstly, I notice you have added insulation to some of the legs of the new capacitors and resistors, but not others, and was wondering how do you decide which legs need insulating? Also, what do you use for cleaning the tuning scale safely, so as not to risk removing the numbers/lettering?
Hello dgwparfitt, thank you and it's my pleasure. I'm happy to answer your questions if I can. I add insulation to the end of the capacitor/resistor that has a high voltage on it or is in close proximity to other components it may short to. I don't usually worry too much about the grounded end of a component unless it poses a short risk to another components. Cleaning the tuning scale is a problem, at the most I use a tissue and water on the print side, you have to determine to what level you can clean them. If parts of the text are already dislodged you may be only able to use a dry tissue or soft brush and live with the grime. I hope that helps and good luck with your projects 👍😃
@@DavidTipton101 Thanks, that's very helpful. Do you determine the outside foil end of a capacitor before you fit it? That is something that Paul Carlson places a lot of emphasis on in his videos, but I'm not sure how important it really is in these old radios. Best wishes, David (from England)
@@dgwparfitt A radio superstar club friend says it isn't necessary except when connected into active mains. The size of new caps is so much smaller than old wax caps so less likely to pick up stray RF anyway. Feel free to do it if you think it helps 🙂
Another nice job - good fix on that pot !
Thanks Sinewave, thank goodness it turned out to be logarithmic 😀
Another great video!
It like a movie for me!
Hi oltean27, thank you 😃
Very well done !!!
Thanks Bruno 😃
That circle cutter is the cats meow! I don't know how many times I could have used one of those. Could you please post the brand/mfgr? Then I can see if I can find one in the States here. 73'
Hi F.K it's a beauty all right. It's an Ek Tools Circle Scissor Pro Circle Cutter, hope that helps 🙂
@@DavidTipton101 Thanks! 73'
Gorgeous. As usual.
Thank you videolabguy 😀
Pretty good getting it to work without even having a circuit diagram really first rate work. Thanks for sharing I just subscribed to your channel.
Hi LL, thank you and welcome 👋😀
David, I have one of these radios.. it was my father's. Do you still look at them? it would be great to have it looked at
Hi Ecka, contact me at vintageradioaus@gmail.com
It was a one owner virgin.Definitely a keeper
Hi John, and it was stored indoors and not in the garden shed like so many others 😀
Hello, very good to you thanks so much!
Thanks Tony 😀
EXCELLENT JOB
Thanks Dev 🙂
Whats the background music?...nice. BTW- Nice job on restore!!! You take your time like Mr Carlson's Lab.
Thanks Ted, the music is royalty free from www.epidemicsound.com, the track is Eternal State by dvine. I'm a bit different from Paul Carlson in that he knows what he is doing, I'm learning as I go 😄