FAIL!!! VHM Endmill vs. Vise on my DIY CNC
HTML-код
- Опубликовано: 14 окт 2024
- DIY Aluminium CNC
HGR20 Rails with HGH20CA Z1 Blocks on all Axis
C5 SFU1605 with Dualnut on all Axis
4,5kw BT30 ATC Spindle with Fuling VFD
Nema 23 CL Stepper on all Axis
LinuxCNC Probe_basic with Mesa 7i76e Ethernet Card
RattmMotor 4th Axis with Harmonic Reducer
Follow me at Instagram for more Videos: / cnc_andi
Hab meinen Schraubstock auch schon angefräst 😂. Fast in der gleichen Tiefenzustellung. War halt schade um den Fräser.
And they say hobby machines can't cut steel....
I don't why but mine cuts steel. You can see it here and in my other videos too 😉
Hi just started watching your videos and enjoying them very much. What sort of spindle are you using as I am building something similar
First time i'm using a vevor 2.2kw Spindle... now i use a rattmmotor 4.5kw atc spindle
@@cnc_andi3294 thanks for your reply I was looking for one with an atc so will look into the one from rattrig. How did you find it dose it have good torque on the lower speeds for milling steel?
Yes it have a good torque you can mill steel too with max 10mm endmills for bigger endmills you have to use a another spindle with lower rpm and much more torque
@@cnc_andi3294 yes i was thinking of using a servo motor for the spindle to have a bit more torque at lower speeds for steel
Hvor du begynne når du maskinere? På bor? Eller stikke?
Hello, i don´t understand your language. can you please write german or english? Thank you
wow did you stop it or it stalled ?
I stopped it
Ohhh, been there, done that :P
that’s a simple mistake, running without slow testing…
Same with me this week...
No biggie, Z down a little too far, i have done that too.
Ouchhhh 😅
sounded good to me
i almost did that with a 63mm facemill 👀💀💀
Oh shit... 🤣
NG