Видео

@@Trigene1004 hatten wir damals so gekauft. aggregat auf der hängerdeichsel hatte es auch getan.

Müsste ich mal schauen ob da nochwas drauf steht. Müsste aber von Premus/Precitool sein.

Hi, i am using the linuxcnc postprozessor. But for the 4/5th axis you have to config it.

Thanks 😁

I think 16 or 18 thousend on the 6mm endmill

müssten 10000rpm gewesen sein bei 1500mm/min.

Thats was my old 2.2kw 24000rpm spindle from vevor....

you can see the development in my videos... I started the project almost 2 years ago. I started the project almost 2 years ago. I don't know how many Time i spend this project... but it was many 😅😅 I spend this machine many euros you are right. But i don't know how much. That's more a hobby but i can say you rc hobby is not cheaper.👍😉

Genau das ist der grund warum icj das jetzt schon gemacht habe. Irgendwann steht eine 5. Achse an 😅

Hello, you can find a lot of how to´s here on youtube. It´s not so hard to do this.

@cnc_andi3294 Awesome, I've just had a look and see there is a lot of information out there. Thank you for putting it on my radar and glad to hear it wasn't too hard to do!

It,s a 40mm wooden plate

It's in range with Haas mini mill. With smaller table and stronger linears it would be even better.

Yes next time i will do it with bigger rails like hgr 25 or hgr 30 with preload... and 20 or 25 spindles

Wir sind noch live vor ort 😉

First time i'm using a vevor 2.2kw Spindle... now i use a rattmmotor 4.5kw atc spindle

@@cnc_andi3294 thanks for your reply I was looking for one with an atc so will look into the one from rattrig. How did you find it dose it have good torque on the lower speeds for milling steel?

Yes it have a good torque you can mill steel too with max 10mm endmills for bigger endmills you have to use a another spindle with lower rpm and much more torque

@@cnc_andi3294 yes i was thinking of using a servo motor for the spindle to have a bit more torque at lower speeds for steel

You need a mesacard

yes you can do that and tell me how it works ^^

you have to switch from 0.01HZ to 0.10HZ on the VFD

das musst du selbst herausfinden... je nach dicke und material...

I don't why but mine cuts steel. You can see it here and in my other videos too 😉

no sorry i don´t have it in degrees

Hello, i don´t understand your language. can you please write german or english? Thank you

Oh shit... 🤣

I stopped it

Hello 250mm from table to gantry

@CNC_ANDI what is the z travel ? 250 also or less

@@mogilogi1956 z travel 295mm

hello no thats a (in german) siebdruck Platte

@@cnc_andi3294 Ah! Ok. But... it will not deform with time? Do you flat it periodically?

@@giuliobuccini208 yes i have to flat it

Working damage the health too.😅😅

6mm endmill 2 Flute at 24000rpm and 2700mm/min 4mm Ballmill 2 flute 24000rpm at 1700mm/min.

fusion360 with 14 days test machining extension addon

but you can do this witout this extension too by using 3D options... and indexed 4th Axis

@@cnc_andi3294 😉The struggle is real. Thanks! Oh well, back to the garage!

@@feeseize9569 have fun 😊

Hast du schon eine Idee wie es nach Ablauf der Testversion von Fusion weiter geht? Ich bin bitter enttäuscht, hab mir jetzt nen Abo gegönnt für 4/5 Achsen und dann erst festgestellt das dies jetzt auch nicht mehr geht. Kennt wer nen brauchbares Cam Programm für 5 Achsen welches man sich auch leisten kann?

Ca. 2.5 std.

you can find it on ebay... searching for rattmmotor harmonic

I think I'm stalking you @XYZ Spec

@@CNC-Time-Lapse 🤣