*WARNING: Please remember to SHUT DOWN everything when you are trying to fix your Machine. As I mentioned in the video, the Machine started to move on its own and I had the Foot Pedal unplugged. Please take this WARNING seriously or you will have a needle going through your finger(s).* *The Manual Download Link:* cdn.poconosewandvac.com/web/products/instruction-manuals/pdfs/singer/7285q/patchwork-7285q-instruction-manual.pdf
I was working on a quilt, took my bobbin casing out, cleaned under it, replaced my needle and spent 2 hours trying to figure out what was causing that horrible clicking and bobbin jump. You are the only person ive seen who had help to this issue. Thank you so much, saved me $$ taking it in to get it looked at
Yours was the only video to address this problem. I was about to pull my hair out! I knew that the issue was in that area but was hesitant to mess with that spring thing too much. My bobbin was jumping around everywhere and making a racket. Thank you for showing how to fix it. I really didn’t have the cash to pay for a mechanic. You’re the best!!
This was a great video, Thank you so much Jordan! I was troubleshooting my machine while I was making a video and I came across your channel, I did exactly what you said and my machine is working perfectly. I had made myself a 1-hour time frame to fix my sewing machine, or I had to take it to be serviced. I found your video at the last 20 minutes, and it FIXED IT..............................I have subscribed to your channel for sure. I gave you a little shout on my channel as well.....Thanks again 😊
You saved my life, than you!!!! I have Juki but the system around the bobbin case is practically the same as your Singer, and that tention thing is what messed it up. I did exactly what you did and now my machine is back to it's healthy sewing 😍
I have been trying to fix my Janome sewing machine which have this problem for days. You have saved me so much time, money, and effort. Thank you so much for your wonderful video :)
Thanks God i found your video about this. It's really helpful....thank you very much Sir. My JUKI HZL-27Z is working again. God bless you and more power. From your friend here in the Philippines.
When you have time... Watch these important videos below from me. I have made HUGE Medical Discoveries and how we all can stay healthy and grow old without suffering. It's been a 12+ years journey and YES, a very long time. I am now so healthy because of it and I will change your life and health too... ALL FREE !!! *#1 = Intro Video:* ruclips.net/video/qk2WsJAZ2RI/видео.html *#2 = Short - How The Wonder Bracelets works:* ruclips.net/video/deAzyNtMZgM/видео.html *#3 = EASY DIY The Wonder Bracelets:* ruclips.net/video/apFUJfVaofM/видео.html *ALL RECENT VIDEOS:* ruclips.net/user/JodBronsonvideos
When you have time... Watch these important videos below from me. I have made HUGE Medical Discoveries and how we all can stay healthy and grow old without suffering. It's been a 12+ years journey and YES, a very long time. I am now so healthy because of it and I will change your life and health too... ALL FREE !!! *#1 = Intro Video:* ruclips.net/video/qk2WsJAZ2RI/видео.html *#2 = Short - How The Wonder Bracelets works:* ruclips.net/video/deAzyNtMZgM/видео.html *#3 = EASY DIY The Wonder Bracelets:* ruclips.net/video/apFUJfVaofM/видео.html *ALL RECENT VIDEOS:* ruclips.net/user/JodBronsonvideos
Hello Jordan! My machine (Janome MC 6700P) had the same issue and I was about to fix an appointment with the service engineers. I saw you video and made the adjustment that you showed, and now my machine purrs like a cat. It was like a miracle!
Thank you for sharing this video. My issue was different from yours but I watched and listened to you and 13:53 "the case" was the key in my situation! I had been sewing off and on for hours and I don't know what happened but it was misaligned and the needle kept getting stuck. Thanks to you and patience it's fixed now! Blessings to all in love and light!🙏🏼💜🙏🏼💙🙏🏼🧡🙏🏼💛🙏🏼💚🙏🏼
Hello. Thank you for the video. I fix machines often and have never come across this issue till recently. Your fix to the issue worked perfectly. I am hoping you have figured out why your machine started running on you without the pedal. It was because your machine is equipped the a start/stop button feature. It is the bottom button on your machine front. As long as that machine is plugged in, that button is functioning. Many of the newer Singers come with this function. It is nice to use the machine without a pedal such as when using the decorative stitches where you want an even speed. I use it often on my machine. When you first use it make sure that you set your speed at a lower pace until you are accustomed to not using your pedal. You did a wonderful job with your vid with the instructions the camera closeups, everything. Blessings
Hi, unfortunately, this is not a button pressed or anything. When I touch it with the screwdriver to adjust, that is when it goes wacko. Remember, I wasn't able to shut it down at all. *NOTE:* I wish it was the button. At least I am able to let the button go. 😁😆😅🤣😂
@@JodBronson So sorry to hear that. I was hoping I could help you. I repair a lot of machines but mostly vintage and antique. Thanks again for your great vid
DEAR LORD THANK YOU VERY MUCH, I was about to throw my sewing machine from the second floor, I was trying to fix this problem by moving that little thing even more inside instead of the left side. 🥺🥺🥺,
Don't normally comment but just wanted to thank you for being a lifesaver. I'm in the middle of an art project involving textiles when I got the unfortunate headache of nonstop birds' nests while sewing and was pulling my hair out. Researched online and found your video. It exactly addressed the problem I was having. You did an awesome job explaining the issue and how to fix it. I did what you showed me and it worked! I am back to work on the project, avoided a costly and lengthy repair, and ever so happy. Thank you so much for sharing!
I have the exact sewing machine as you do and have all the same problems that you do with yours. The singer patchwork. Thanks for this video it helped me a lot.
Oh my gosh THANK YOU! I spent $80 to have my sewing machine tuned up because I thought it would FIX this, and when I got it back it DID IT AGAIN and I thought I was going to teach my sewing machine how to fly through a window LOL
Great video thanks. My bobbin case started rattling and vibrating whenever it started stitching on a Brother machine I'd had for a few months, the stitching was bunching and tangling straight away. The only slight damage I could find on the bobbin case was a very, very small scratch on the underside. Anyway I changed out the bobbin case for another and it fixed it. It looks like this thing is very sensitive to any slight damage.
Hello Jordan, THANK YOU. My machine had this issue and I didn't know what was wrong so I thought I had to take it into the repair shop and I am trying to finish a project in a few days. You're a life saver!!
You are welcome. Since you know how to sew..... I will change your life and health and ALL FREE... Check out my greatest discoveries that NO ONE was able to figure out. *My Video LINK:* ruclips.net/video/qk2WsJAZ2RI/видео.html
THANK YOU REALLY i have been dealing with this bobbin problem for days. You are the only one that actually has a video a good video about the right thing i need. You talk alot so do i now i keep having to fix needle threader i would love for you to show me why it keeps not working and how to fix for good before expensive sewing machine goes out window. PLEASE
thanks for noticing that little thing, for more than a month I have been battling with it. I watched your video carefully and findout that I have just same problem. thanks
Thank you so much! 💓 I kept telling my hubby who knows so much more about sewing than me that the bobbin was not doing things like it used to and it kept causing the rest of the machine to not do its jobs all together. We saw the tiny metal thingy was pressed all the way in when u showed that! He fixed it following along to ur vid and it saved our mostly new machine!
You were a lifesaver for me...I am making masks and right in the middle, my casing did just as yours. Thank you and may you reap many blessings for your kindness and sharing. My funds are very limited. Again, THANK YOU!!!
Ohhh 😮 thank you so much!! I can’t imagine how much a sewing machine repair shop would have charged me for this! Thank you 😊. And thank you for the little hint about that tiny screw to adjust the thread tension… I needed that!
You sir have saved me from being without a sewing machine. I was using my brand new out of the box Singer Confidence 7640 and since this is my first sewing machine, I started sewing with the presser foot up. This messed up my bobbin and moved the bobbin case. I put it back in but it kept jamming every time I tried start sewing again. I was able to fix it after watching your video. Thank you so so much!
I'm glad it helped you. I was in the same boat as you are, before this video. The Machine in the video is almost new too. I'm glad you found this video and got it fixed! You are welcome and please stay safe !!! ❤️❤️❤️❤️❤️❤️
Thanks, very helpful. Had this identical issue on my brand new Singer 4452. Today is my first time using it and already having problems. Was about to box it up and send it back. Thanks to you I’m able to finish hemming my work pants. Hopefully this is the first and last problem I’ll have with this otherwise I’ll be getting something else. Thanks again.
This is the perfect video. I have been sewing for three days and my bobbin thread would not get picked up correctly. First, It needed cleaning which you explained well. But the tip to adjust that small spring in the front was all it needed. I have been changing out the color of threads frequently and this will help me finish my project! Thank you so much!
Wow.. Thankyou so much.. I was about the throw away my brand new machine..well I've had it 2 years and it was gifted to me. I just couldn't figure out why it was so noisy. Also why I had everything out I found another problem which I managed to adjust. I'm so annoyed as it was the factory setting which was wrong. Thankyou so much you saved me alot of money
You are welcome! Apparently, we are not alone. This video have helped a lot of people, so they too have the same problem, like you and I. Please stay safe in this difficult time and a mask will go far! ❤️❤️❤️❤️❤️❤️❤️
Also, if you are making masks and want extra protections. It's really easy... See this video here as I explained why: ruclips.net/video/lXSFd9bKfhI/видео.html
You are welcome! *When you have time... Watch these important videos below from me.* I have made HUGE Medical Discoveries and how we all can stay healthy and grow old without suffering. It's been a 12+ years journey and YES, a very long time. I am now so healthy because of it and I will change your life and health too... ALL FREE !!! *#1 = Intro Video:* ruclips.net/video/qk2WsJAZ2RI/видео.html *#2 = Short - How The Wonder Bracelets works:* ruclips.net/video/deAzyNtMZgM/видео.html *#3 = EASY DIY The Wonder Bracelets:* ruclips.net/video/apFUJfVaofM/видео.html *ALL RECENT VIDEOS:* ruclips.net/user/JodBronsonvideos
Dude!!! Thank you! I’ve been having tension issues with my machine and searching and searching for videos to help me with this problem. Your video really helped. Thank you for making it!
Thank you so much. Common sense can be a wonderful thing. This solved my problem. It turns out my tension thingie had been bent all out of shape and wasn’t even in the right place. So seeing what this area is supposed to look like helped me put it back and it seems to be working better than ever. Wow
I can’t wait to try this out tomorrow morning! I have been working on my machine for 3 days trying to fix this same problem! Fingers crossed it works. Nothing open during Covid -19 shut down.
Wow, I am glad I found your channel. Just had this happen to me yesterday. Now I can fix it myself without paying out $ I don't need to. Thanks so very much!!
thank you so much for this video!! I was struggling so much with my new machine that I was ready to give up but now it works and I was able to recycle one of my shirts into something cute !!
Wow, I bought a Brand New Husquavana Jade a couple of years ago, it was a beauty of a machine and a great deal, but it sounded like a truck, I sent it back, they so called looked at it, sent it back to myself and still had the same noise issue and rattling bobbin, I knew something was wrong and had a really bad time with the company trying to return, you have shown what the problem was and that I was correct knowing there was an issue. Thank you 🙏 Little hint, if you remove needle place fabric under foot, I’ve lost a needle before and had to take whole darn machine apart. 🙂
I have a designer one husqvarna and the bobbin is not working at all. I just replaced the screen, but the bobbin does not even move. I'm so disappointed with it. I got a Singer Confidence for dirt cheap and it is doing ok. Wish I could get my Husqvarna working though.
What a shame, worth trying to repair maybe, machine these days are built to sew through thin material and that’s it, best machines I think are the good old Vintage Singers pre 1955, they cope well with most things and never let me down, If by slim chance they do, I can fix them, I just love them. 🧵🙂
Your video just saved me so much time and money. I was having this same issue on my Juki DX7 and I couldn’t figure out for the life of me what was happening. I’m very glad you decided to take a video and share this. Thank you!
Thank you so much! I just fixed my machine thanks to you!!!! I was growing frustrated because I couldn’t figure it out and I can’t find any video to help me until I stumble upon yours! Thank you. I love how you say I’m not an expert Lol I think your funny
@@libmartinez1296 - Thankx! When you get a chance, watch this Video here I've made a while back. I talked about a few things way ahead of time. Most is happening right now as we speak. Here is how I helped my Dad stay safe during working. Video Link: ruclips.net/video/FTDba7889ZE/видео.html
Thank you ever so much for this video and information. I, too, was having this same problem and really do not know when it all started, but has been getting worse as time progressed. I found the tension spring was nearly to the right side, so no tension on the bobbin thread at all! Go figure! Thanks again for your invaluable help, especially on this particular machine! Llama Lady
Brilliant Jordan! I was terrified of messing with that spring but your video gave me just enough to go ahead and it worked!! My wife thanks you and I thank you!
You are welcome. Let me give you something that NO ONE can and took me 10+ years to understand and YES, it was a hard journey too. Since you guys can sew.... It will be EVEN BETTER, you can design or custom your own... See this video here.... Long, but worth it !!! *LINK:* ruclips.net/video/qk2WsJAZ2RI/видео.html
Thank you so much Jordon. I was about to buy another machine tomorrow. I used your instructions to fix my sewing machine. You are a Godsend and I am now a new subscriber. Love your teaching style, so easy to follow.
This was the first time I dared to open my machine and it was just too much fuss inside, it was totally unexpected! Thankyou so much I followed the steps and got it fixed❤️
You are THE BEST! You had the answer you smart man you! You solved my problem and made it possible for me to keep sewing and not have to take the machine into a shop!! Big hugs, Deb
That tiny metal plate movable springy thingy, the bobbin stopper from going round, to the right. 👉💥 Adjusted with tiny flat head screw driver. Must have gotten out of shape, aliengment when I took out the ring for cleaning. straightened up the stitch. It was running together, continously like one stitch. So unproffesional looking. Undefined stitch, horrid. Long skinny strand Instead of thick well defined individual stitch. Hours trying to find Frustrating. 😡. ------------ I have seen vids machine demonstrations with this stitch. They say its just the machine. Yeah Operator technik machine adjustment. ------------- That little thingymajig and tiny bobbin tighten. Thank you so much The stitch is "perfect". 🤺💐
Ok I fixed it took 2 seconds, I know I was on the right track when you mentioned tread bunching up there. So far I purchased 3 new bobbin cases (that is what we call them here) No I have spares. Lots of babbling going on that video, but I am very happy with the end result.
Wow this video really fixed the same frustrating problem I was having. I need to add this video to my favourites for future reference! After fussing with my machine for like an hour and watching a bunch of videos, nothing worked until I watched your video, thank you so much for sharing!
This is close to solving my problem. The little lip that sticks out of the plastic case that holds the bobbin and touches that small metal tensioner is pressing too hard against the tensioner so the string can’t pass by it. It’s too close to the tensioner rather than the tensioner being the issue. This helps though thanks.
Thank you so much!!!!! You’re my hero. I was working on a holiday project and could not figure out what went wrong. After watching your video I was able to fix in a couple minutes.
Hello Jordan. I came across your video by searching for my problem. So...i have a SC220(SINGER). My problem is...that the threat under it stuck when i m sewing and it tangles and stuck my fabric or into that teeth under or in all that threat that tangle under in there.....Sometimes the threat under the fabric remains loose while sewing so the reverse of what i sew i can see it🙄And the last issue...that little "knot" of the what you called case(the black case i. Which u ll put the bobbin ) that lil knot aint hit that metal "pedal" like.....but it is a bit more front side and which makes go and stop after the small pedal,it stops into that piece of metal right next to it.I tried to put it in place like how i see but...holy crap isnt "catching " the place.I am beginner, yhis is also my first sewing machine and i really dont know much about.....
Ok try this..... Take the thread-bobbin out and clean everything, then, put it back and see. Also, your Thread Tensioner (On Top with Dial Number) may be too tight. Dial it back to 0 or 1 *NOTE:* 1. When the Bottom Thread too loose or tangle = Top Dial Tensioner or Dirty or Thread is caught due to fabric. 2. When Top Thread not normal = Bottom Tensioner or Bobbin Holder Tensioner
wow thank you for sharing this. now i can use my machine again. I just bought it last year and use it now to make myself busy at home but that problem happened.
Thank you for this video I will try this later on the night after work. I’ve been so bad at my machine because I don’t know much about it all I have is memories of my dad sewing days and try to imitate him. So thank you 😊
You are welcome! I hope you will get it fixed and if not, just ask questions or make a video and post it in your channel and I will try to help you or even others. As for your Dad, he's showing you " His Existence ". When you get a moment, please see this video here and you know what that means.... ruclips.net/video/65TyQyXK8u4/видео.html
This was the best repair video EVER!! And the commentary was hilarious and enjoyable! I have spent SO much money taking this machine to the repair shop for the same problem over and over! And now I'm angry that the repair person didn't just tell me about this issue! Thank you, Thank you, Thank you because I was about to throw this machine out!
I will be doing this tomorrow. Your video is perfect. And I love the names of the objects. They're all just things! Who the heck knows what that stuff is called =) made total sense to me
When you have a moment. Take a look at The Wonder Bracelet. I promised, your life will change. See this video here and there are plenty of benefits that this bracelet does. LINK: ruclips.net/video/U1byqnUUM4k/видео.html
When you’re threading your machine, you have to put the foot in the up position. That allows for a smooth threading without the tension you’re feeling. Thanks for helping with the bobbin casing. Mine has been making a lot of noise. Now I know why🤓
*"When you’re threading your machine, you have to put the foot in the up position." Did you watch the video? This is during sewing...... How am I going to sew IF the foot is in an "up" position? LMFAO*
This is my exact problem. rattle rattle rattle. Then sometimes it starts getting bunched up, because my thread came out of the slot. Since I owned the machine and very annoying.. He is right about turning off the machine. The Start button is super sensitive and it will start as if a ghost finger pushed the button.
Omg, thank you. Unfortunately I had literally both tension issues with the bobbin so it was noisy as all get out. But you actually helped me fix that! Thank you so much!
Thank you very much, I bought my brother se 600 just one month ago and I was have the same problem until I have seeing your video. Sorry for my English.
Thank you so much Jordan I’ve been trying to figure this out for a whole week. Nothing in the manual you are awesome I was losing hope🤨 you definitely helped me and I’m sure many more.
Check out my channel under Video. There are a lot of Health Related Videos, it may helped you to stay healthy, especially Grounding. I have discovered many things that Doctors around the World don't even know and I am not a doctor, LOL.
I know what you mean about "frustrations". I was using the machine for 3+ months before I figure out what it was. I'm glad you are able to find this video and that it helped you. Please BE CAREFUL if you have this machine or anything with electronic controls.... As stated in the video, I had the step controller out and the machine run by itself. So unplug when you are fixing it, cause it only takes 3 seconds to do. All your fingers are worth more than 3 seconds. STAY SAFE and HAPPY SEWING !!! EDIT: *I forgot... You are welcome!*
Thanks for the fix but when you put bobbin back in it's upside down thread should come of counterclockwise and you have it running clockwise. Just in case you are having a issue now with it.
I've been having problems when I try to see knits. To the point I have to turn my tension up all the way. I'm going to try this I'm thinking this is what the problem is. Thanks for sharing this.
When you get a chance... Let me give you something that NO ONE in the world can and ALL FREE. I will lead to better health, I promise! Take a bit of time out and watch this recent video, how I made a HUGE Medical Discoveries. LINK: ruclips.net/video/qk2WsJAZ2RI/видео.html
*WARNING: Please remember to SHUT DOWN everything when you are trying to fix your Machine. As I mentioned in the video, the Machine started to move on its own and I had the Foot Pedal unplugged. Please take this WARNING seriously or you will have a needle going through your finger(s).*
*The Manual Download Link:* cdn.poconosewandvac.com/web/products/instruction-manuals/pdfs/singer/7285q/patchwork-7285q-instruction-manual.pdf
Check " DESCRIPTION "
Yeah what happened to you happened to me also please be careful guys
@@phallin4yaya82 - OMG, WOW !!! Please be safe !!!
@@phallin4yaya82 - Thankx for letting me and everyone knows. Singer should take this into consideration or Lawsuits when they have needle in fingers.
Thank You
And hour and a half of frustration and multiple videos, yours solved the problem!!! Thank you so much!!
I'm glad the video was able to help you. You are welcome!
Which one for you ?
The bobbin and or
the tiny metal
plate thingamajig.
For me it was
a little of both.
The stitch
is now, perfect.
🙋
🤺💐
I had been Fixing it for two days. Yet none of the official troubleshooting guide was telling me this! Thanks so much! 🎉
You are welcome!
THANK YOU JORDAN!!! You have helped me sooooooooo much with this video. Bless you xx
You are welcome!
Thanks much for sharing my machine problem solved after watching your video 🙏
You are welcome!
I was working on a quilt, took my bobbin casing out, cleaned under it, replaced my needle and spent 2 hours trying to figure out what was causing that horrible clicking and bobbin jump. You are the only person ive seen who had help to this issue. Thank you so much, saved me $$ taking it in to get it looked at
Yours was the only video to address this problem. I was about to pull my hair out! I knew that the issue was in that area but was hesitant to mess with that spring thing too much. My bobbin was jumping around everywhere and making a racket. Thank you for showing how to fix it. I really didn’t have the cash to pay for a mechanic. You’re the best!!
You are welcome! I'm glad you were able to find the video and the fix!
This was the ONLY video of that fixed the problem I was having. 🙏 a million thanks isn’t enough. I appreciate your video.
You are welcome! Glad you got it fixed!
This was a great video, Thank you so much Jordan! I was troubleshooting my machine while I was making a video and I came across your channel, I did exactly what you said and my machine is working perfectly. I had made myself a 1-hour time frame to fix my sewing machine, or I had to take it to be serviced. I found your video at the last 20 minutes, and it FIXED IT..............................I have subscribed to your channel for sure. I gave you a little shout on my channel as well.....Thanks again 😊
You are welcome! I'm glad you found the video and was able to fix it!
You fixed it- that was the problem!! You re a genus!!!!
You saved my life, than you!!!!
I have Juki but the system around the bobbin case is practically the same as your Singer, and that tention thing is what messed it up. I did exactly what you did and now my machine is back to it's healthy sewing 😍
You are welcome!
I have been trying to fix my Janome sewing machine which have this problem for days. You have saved me so much time, money, and effort. Thank you so much for your wonderful video :)
You are welcome!
Thanks God i found your video about this. It's really helpful....thank you very much Sir. My JUKI HZL-27Z is working again. God bless you and more power. From your friend here in the Philippines.
When you have time... Watch these important videos below from me. I have made HUGE Medical Discoveries and how we all can stay healthy and grow old without suffering. It's been a 12+ years journey and YES, a very long time. I am now so healthy because of it and I will change your life and health too... ALL FREE !!!
*#1 = Intro Video:* ruclips.net/video/qk2WsJAZ2RI/видео.html
*#2 = Short - How The Wonder Bracelets works:* ruclips.net/video/deAzyNtMZgM/видео.html
*#3 = EASY DIY The Wonder Bracelets:* ruclips.net/video/apFUJfVaofM/видео.html
*ALL RECENT VIDEOS:* ruclips.net/user/JodBronsonvideos
Bless you for making this it worked for me on my kenmore!
Awesome!
Thanks Jordan, you made my job easier. Because there is no singer machine repair shop in Pakistan
Hello Pakistan. You are welcome!
When you have time... Watch these important videos below from me. I have made HUGE Medical Discoveries and how we all can stay healthy and grow old without suffering. It's been a 12+ years journey and YES, a very long time. I am now so healthy because of it and I will change your life and health too... ALL FREE !!!
*#1 = Intro Video:* ruclips.net/video/qk2WsJAZ2RI/видео.html
*#2 = Short - How The Wonder Bracelets works:* ruclips.net/video/deAzyNtMZgM/видео.html
*#3 = EASY DIY The Wonder Bracelets:* ruclips.net/video/apFUJfVaofM/видео.html
*ALL RECENT VIDEOS:* ruclips.net/user/JodBronsonvideos
Hello Jordan! My machine (Janome MC 6700P) had the same issue and I was about to fix an appointment with the service engineers. I saw you video and made the adjustment that you showed, and now my machine purrs like a cat. It was like a miracle!
*Awesome, GREAT JOB !!!*
Thank you for sharing this video. My issue was different from yours but I watched and listened to you and 13:53 "the case" was the key in my situation! I had been sewing off and on for hours and I don't know what happened but it was misaligned and the needle kept getting stuck. Thanks to you and patience it's fixed now! Blessings to all in love and light!🙏🏼💜🙏🏼💙🙏🏼🧡🙏🏼💛🙏🏼💚🙏🏼
You are welcome!
Jordan you are a HERO!!! We tried EVERYTHING but did not fix until this video - GREATLY APPRECIATED!!!!
You are welcome!
Hello. Thank you for the video. I fix machines often and have never come across this issue till recently. Your fix to the issue worked perfectly. I am hoping you have figured out why your machine started running on you without the pedal. It was because your machine is equipped the a start/stop button feature. It is the bottom button on your machine front. As long as that machine is plugged in, that button is functioning. Many of the newer Singers come with this function. It is nice to use the machine without a pedal such as when using the decorative stitches where you want an even speed. I use it often on my machine. When you first use it make sure that you set your speed at a lower pace until you are accustomed to not using your pedal. You did a wonderful job with your vid with the instructions the camera closeups, everything. Blessings
Hi, unfortunately, this is not a button pressed or anything. When I touch it with the screwdriver to adjust, that is when it goes wacko. Remember, I wasn't able to shut it down at all.
*NOTE:* I wish it was the button. At least I am able to let the button go. 😁😆😅🤣😂
@@JodBronson So sorry to hear that. I was hoping I could help you. I repair a lot of machines but mostly vintage and antique. Thanks again for your great vid
Wow! I followed your video and fixed my machine. Thank you so much.
You are welcome!
Thank you so much it help a lot who is 1st timer in sewing.
You are welcome!
Thanks for your video! It corrected my bobbin issue.
You are welcome!
Thank you soooo much. I was able to fix my Kenmore which I have had for almost 30 years.
You are welcome!
DEAR LORD THANK YOU VERY MUCH, I was about to throw my sewing machine from the second floor, I was trying to fix this problem by moving that little thing even more inside instead of the left side. 🥺🥺🥺,
You are welcome! Glad you got it fixed!
Me too 😂
🤣🤣🤣 i fee ya
Yes I understand, I was about to beat mine with a sledge hammer. Once I saw how this area was supposed to look I could see what was wrong.
We are the same person 😹
Thank you so much for this video
My sewing machine got fixed 😊
You are welcome!
This helped me a lot. I also don’t know what everything is called but I was able to fix my problem with your suggestion! Thank you!
You are welcome!
Don't normally comment but just wanted to thank you for being a lifesaver. I'm in the middle of an art project involving textiles when I got the unfortunate headache of nonstop birds' nests while sewing and was pulling my hair out. Researched online and found your video. It exactly addressed the problem I was having. You did an awesome job explaining the issue and how to fix it. I did what you showed me and it worked! I am back to work on the project, avoided a costly and lengthy repair, and ever so happy. Thank you so much for sharing!
You are welcome! Good job !!!
I have the exact sewing machine as you do and have all the same problems that you do with yours. The singer patchwork. Thanks for this video it helped me a lot.
You are welcome!
Thank you very much, I repaired my singer with this video
You are welcome!
Oh my gosh THANK YOU! I spent $80 to have my sewing machine tuned up because I thought it would FIX this, and when I got it back it DID IT AGAIN and I thought I was going to teach my sewing machine how to fly through a window LOL
You are welcome!
Great video thanks. My bobbin case started rattling and vibrating whenever it started stitching on a Brother machine I'd had for a few months, the stitching was bunching and tangling straight away. The only slight damage I could find on the bobbin case was a very, very small scratch on the underside. Anyway I changed out the bobbin case for another and it fixed it. It looks like this thing is very sensitive to any slight damage.
Hello Jordan, THANK YOU. My machine had this issue and I didn't know what was wrong so I thought I had to take it into the repair shop and I am trying to finish a project in a few days. You're a life saver!!
You are welcome. Since you know how to sew..... I will change your life and health and ALL FREE... Check out my greatest discoveries that NO ONE was able to figure out.
*My Video LINK:* ruclips.net/video/qk2WsJAZ2RI/видео.html
THANK YOU REALLY i have been dealing with this bobbin problem for days. You are the only one that actually has a video a good video about the right thing i need. You talk alot so do i now i keep having to fix needle threader i would love for you to show me why it keeps not working and how to fix for good before expensive sewing machine goes out window. PLEASE
My Auto Thread video is here: ruclips.net/video/xnJc7vKrAEE/видео.html
Thank you, I got a used machine and this was my first time ever using a machine and this video helped me fix it!
You are welcome!
People like to watch you cause you ate funny as heck thank you for your video and entertainment 😍
You are welcome! 😍😍😍😍😍
thanks for noticing that little thing, for more than a month I have been battling with it. I watched your video carefully and findout that I have just same problem. thanks
You are welcome!
Thank you. You saved me a trip to the sewing machine mechanic. It would cost me $125.00.
You are welcome!
Thank you so much! 💓 I kept telling my hubby who knows so much more about sewing than me that the bobbin was not doing things like it used to and it kept causing the rest of the machine to not do its jobs all together. We saw the tiny metal thingy was pressed all the way in when u showed that! He fixed it following along to ur vid and it saved our mostly new machine!
You are welcome!
You were a lifesaver for me...I am making masks and right in the middle, my casing did just as yours. Thank you and may you reap many blessings for your kindness and sharing. My funds are very limited. Again, THANK YOU!!!
You're welcome!
You are welcome and please stay safe! ALSO..... See this video when you get a chance about COVID-19: ruclips.net/video/x-idnqXFfa4/видео.html
Ohhh 😮 thank you so much!! I can’t imagine how much a sewing machine repair shop would have charged me for this! Thank you 😊. And thank you for the little hint about that tiny screw to adjust the thread tension… I needed that!
You are welcome!
You sir have saved me from being without a sewing machine. I was using my brand new out of the box Singer Confidence 7640 and since this is my first sewing machine, I started sewing with the presser foot up. This messed up my bobbin and moved the bobbin case. I put it back in but it kept jamming every time I tried start sewing again. I was able to fix it after watching your video. Thank you so so much!
I'm glad it helped you. I was in the same boat as you are, before this video. The Machine in the video is almost new too. I'm glad you found this video and got it fixed! You are welcome and please stay safe !!! ❤️❤️❤️❤️❤️❤️
Thanks, very helpful. Had this identical issue on my brand new Singer 4452. Today is my first time using it and already having problems. Was about to box it up and send it back. Thanks to you I’m able to finish hemming my work pants. Hopefully this is the first and last problem I’ll have with this otherwise I’ll be getting something else. Thanks again.
Awesome!
Thaaaaaank you so much for this Video!!! Super helpful!!! 🙌🏼🦋🌸❤️
You are welcome!
This totally worked! I was just about to take it to the Singer Factory store. Now I can continue with my project. Thank you!!!
You are welcome!
This is the perfect video. I have been sewing for three days and my bobbin thread would not get picked up correctly. First, It needed cleaning which you explained well. But the tip to adjust that small spring in the front was all it needed. I have been changing out the color of threads frequently and this will help me finish my project! Thank you so much!
You are welcome. Glad I was able to help you !!!
Wow.. Thankyou so much.. I was about the throw away my brand new machine..well I've had it 2 years and it was gifted to me. I just couldn't figure out why it was so noisy. Also why I had everything out I found another problem which I managed to adjust. I'm so annoyed as it was the factory setting which was wrong. Thankyou so much you saved me alot of money
You are welcome! Apparently, we are not alone. This video have helped a lot of people, so they too have the same problem, like you and I. Please stay safe in this difficult time and a mask will go far! ❤️❤️❤️❤️❤️❤️❤️
Also, if you are making masks and want extra protections. It's really easy... See this video here as I explained why: ruclips.net/video/lXSFd9bKfhI/видео.html
@@JodBronson bless you, your so nice. Please stay safe so you can keep making brill videos xxxx
@@pizzabirdog - I will !!! ❤️❤️❤️❤️❤️❤️❤️
The fix that you demonstrated helped tremendously. Thank you very much!!
You are welcome!
Thank you!! Saved me $100!
You are welcome!
*When you have time... Watch these important videos below from me.* I have made HUGE Medical Discoveries and how we all can stay healthy and grow old without suffering. It's been a 12+ years journey and YES, a very long time. I am now so healthy because of it and I will change your life and health too... ALL FREE !!!
*#1 = Intro Video:* ruclips.net/video/qk2WsJAZ2RI/видео.html
*#2 = Short - How The Wonder Bracelets works:* ruclips.net/video/deAzyNtMZgM/видео.html
*#3 = EASY DIY The Wonder Bracelets:* ruclips.net/video/apFUJfVaofM/видео.html
*ALL RECENT VIDEOS:* ruclips.net/user/JodBronsonvideos
Dude!!! Thank you! I’ve been having tension issues with my machine and searching and searching for videos to help me with this problem. Your video really helped. Thank you for making it!
You are welcome and stay safe !!! ❤️❤️❤️❤️❤️❤️
Thank you so much. Common sense can be a wonderful thing. This solved my problem. It turns out my tension thingie had been bent all out of shape and wasn’t even in the right place. So seeing what this area is supposed to look like helped me put it back and it seems to be working better than ever. Wow
You are welcome. Glad it helped you!
This was a big help. Thank you! I sew with no shoes so I can feel my pedal to avoid an accident. I do shut down when working on my machine.
I can’t wait to try this out tomorrow morning! I have been working on my machine for 3 days trying to fix this same problem! Fingers crossed it works. Nothing open during Covid -19 shut down.
You can try my NO SEW Mask in my Channel if you aren't able to fix.. It's really EASY + FAST + 3 Minutes most. Stay safe!!! ❤️❤️❤️❤️❤️❤️❤️
Wow, I am glad I found your channel. Just had this happen to me yesterday. Now I can fix it myself without paying out $ I don't need to. Thanks so very much!!
You are welcome!
thank you so much for this video!! I was struggling so much with my new machine that I was ready to give up but now it works and I was able to recycle one of my shirts into something cute !!
You are welcome!
Wow, I bought a Brand New Husquavana Jade a couple of years ago, it was a beauty of a machine and a great deal, but it sounded like a truck, I sent it back, they so called looked at it, sent it back to myself and still had the same noise issue and rattling bobbin, I knew something was wrong and had a really bad time with the company trying to return, you have shown what the problem was and that I was correct knowing there was an issue. Thank you 🙏 Little hint, if you remove needle place fabric under foot, I’ve lost a needle before and had to take whole darn machine apart. 🙂
I have a designer one husqvarna and the bobbin is not working at all. I just replaced the screen, but the bobbin does not even move. I'm so disappointed with it. I got a Singer Confidence for dirt cheap and it is doing ok. Wish I could get my Husqvarna working though.
What a shame, worth trying to repair maybe, machine these days are built to sew through thin material and that’s it, best machines I think are the good old Vintage Singers pre 1955, they cope well with most things and never let me down, If by slim chance they do, I can fix them, I just love them. 🧵🙂
Your video just saved me so much time and money. I was having this same issue on my Juki DX7 and I couldn’t figure out for the life of me what was happening. I’m very glad you decided to take a video and share this. Thank you!
You are welcome!
OMG thank you for this, I just had this exact problem with my Singer Confidence machine and this has fixed it right up. Thanks again.
You are welcome!
Thank you so much! I just fixed my machine thanks to you!!!! I was growing frustrated because I couldn’t figure it out and I can’t find any video to help me until I stumble upon yours! Thank you. I love how you say I’m not an expert Lol I think your funny
You are welcome! Stay safe!!! ❤️❤️❤️❤️❤️❤️❤️
Jordan Bronson you too!
@@libmartinez1296 - Thankx! When you get a chance, watch this Video here I've made a while back. I talked about a few things way ahead of time. Most is happening right now as we speak. Here is how I helped my Dad stay safe during working. Video Link: ruclips.net/video/FTDba7889ZE/видео.html
Thank you ever so much for this video and information. I, too, was having this same problem and really do not know when it all started, but has been getting worse as time progressed. I found the tension spring was nearly to the right side, so no tension on the bobbin thread at all! Go figure! Thanks again for your invaluable help, especially on this particular machine! Llama Lady
You are welcome!
Brilliant Jordan! I was terrified of messing with that spring but your video gave me just enough to go ahead and it worked!! My wife thanks you and I thank you!
You are welcome. Let me give you something that NO ONE can and took me 10+ years to understand and YES, it was a hard journey too. Since you guys can sew.... It will be EVEN BETTER, you can design or custom your own... See this video here.... Long, but worth it !!!
*LINK:* ruclips.net/video/qk2WsJAZ2RI/видео.html
Thank youuu so muchhh from TÜRKİYE. I fixed my machine from your video.🙏🙏
You are welcome!
Thank you so much Jordon. I was about to buy another machine tomorrow. I used your instructions to fix my sewing machine. You are a Godsend and I am now a new subscriber. Love your teaching style, so easy to follow.
You are welcome! I'm glad you found the right video and got it fixed!
This was the first time I dared to open my machine and it was just too much fuss inside, it was totally unexpected! Thankyou so much I followed the steps and got it fixed❤️
You are welcome. Stay safe! ❤️❤️❤️❤️❤️
So funny 😂 this video
@@Maria-ng3yf - 😂😂😂😂😂😂
You are THE BEST! You had the answer you smart man you! You solved my problem and made it possible for me to keep sewing and not have to take the machine into a shop!! Big hugs, Deb
Glad I could help!
Really thank you. My machine didnt work for a long time. You saved me . From Myanmar.
Oh nice. You are welcome!
That tiny metal plate movable springy thingy,
the bobbin stopper from going round,
to the right. 👉💥
Adjusted with tiny
flat head screw driver.
Must have gotten out of shape, aliengment when I took out the ring
for cleaning.
straightened up
the stitch.
It was running together, continously
like one stitch.
So unproffesional looking. Undefined stitch, horrid. Long skinny strand
Instead of thick
well defined
individual stitch.
Hours trying to find
Frustrating. 😡.
------------
I have seen vids
machine demonstrations
with this stitch.
They say its just
the machine.
Yeah
Operator technik
machine adjustment.
-------------
That little thingymajig
and tiny
bobbin tighten.
Thank you so much
The stitch is "perfect".
🤺💐
Ok I fixed it took 2 seconds, I know I was on the right track when you mentioned tread bunching up there. So far I purchased 3 new bobbin cases (that is what we call them here) No I have spares. Lots of babbling going on that video, but I am very happy with the end result.
Did I "babbling" about off point? Did I "babbling" about how I wipe my booty or was I "babbling" about the machine or functional of the machine?
Omg thank you so much!!! I was having such a hard time trying to fix my machine 😫😫😫 you saved me !!!!!!!
You are welcome!
Thanks much. Your video is very informative.olive
You are welcome!
Wow this video really fixed the same frustrating problem I was having. I need to add this video to my favourites for future reference! After fussing with my machine for like an hour and watching a bunch of videos, nothing worked until I watched your video, thank you so much for sharing!
You are welcome!
Your video helped me get the parts back in after removing them...Thank You
You are welcome. Stay safe !!!
This is close to solving my problem. The little lip that sticks out of the plastic case that holds the bobbin and touches that small metal tensioner is pressing too hard against the tensioner so the string can’t pass by it. It’s too close to the tensioner rather than the tensioner being the issue. This helps though thanks.
Thank You sooo much. I been frustrated for a week over this and was about to take it to get fixed. I tried it and it totally worked! Thanks again
Good job and you are welcome !!!
Thank you so much!!!!! You’re my hero. I was working on a holiday project and could not figure out what went wrong. After watching your video I was able to fix in a couple minutes.
You are welcome !!!
Hello Jordan. I came across your video by searching for my problem. So...i have a SC220(SINGER). My problem is...that the threat under it stuck when i m sewing and it tangles and stuck my fabric or into that teeth under or in all that threat that tangle under in there.....Sometimes the threat under the fabric remains loose while sewing so the reverse of what i sew i can see it🙄And the last issue...that little "knot" of the what you called case(the black case i. Which u ll put the bobbin ) that lil knot aint hit that metal "pedal" like.....but it is a bit more front side and which makes go and stop after the small pedal,it stops into that piece of metal right next to it.I tried to put it in place like how i see but...holy crap isnt "catching " the place.I am beginner, yhis is also my first sewing machine and i really dont know much about.....
Ok try this..... Take the thread-bobbin out and clean everything, then, put it back and see. Also, your Thread Tensioner (On Top with Dial Number) may be too tight. Dial it back to 0 or 1
*NOTE:*
1. When the Bottom Thread too loose or tangle = Top Dial Tensioner or Dirty or Thread is caught due to fabric.
2. When Top Thread not normal = Bottom Tensioner or Bobbin Holder Tensioner
wow thank you for sharing this. now i can use my machine again. I just bought it last year and use it now to make myself busy at home but that problem happened.
You are welcome and stay safe !!! ❤️❤️❤️❤️❤️❤️
Thank you for this video I will try this later on the night after work. I’ve been so bad at my machine because I don’t know much about it all I have is memories of my dad sewing days and try to imitate him. So thank you 😊
You are welcome! I hope you will get it fixed and if not, just ask questions or make a video and post it in your channel and I will try to help you or even others. As for your Dad, he's showing you " His Existence ". When you get a moment, please see this video here and you know what that means.... ruclips.net/video/65TyQyXK8u4/видео.html
This was the best repair video EVER!! And the commentary was hilarious and enjoyable! I have spent SO much money taking this machine to the repair shop for the same problem over and over! And now I'm angry that the repair person didn't just tell me about this issue! Thank you, Thank you, Thank you because I was about to throw this machine out!
You are welcome! Stay safe!
Yes, I could listen to him all day. I wonder how long you could have a conversation with him without busting out laughing!
I will be doing this tomorrow. Your video is perfect. And I love the names of the objects. They're all just things! Who the heck knows what that stuff is called =) made total sense to me
When you have a moment. Take a look at The Wonder Bracelet. I promised, your life will change. See this video here and there are plenty of benefits that this bracelet does. LINK: ruclips.net/video/U1byqnUUM4k/видео.html
The whole Play List of The Wonder Bracelet here: ruclips.net/p/PLu6UVmXTZzOhYMYfE9SlYGGkaZR86-zax
Thank you so much, this solved my problem!
You're welcome!
Thank you so very much. My machine just started this yesterday, I was ready to pull my hair out! Now it’s works great!! You are awesome
You are welcome!
Thank you, this problem had me baffled and I was so aggravated!
You are welcome, stay safe !!! ❤️❤️❤️❤️
When you’re threading your machine, you have to put the foot in the up position. That allows for a smooth threading without the tension you’re feeling. Thanks for helping with the bobbin casing. Mine has been making a lot of noise. Now I know why🤓
*"When you’re threading your machine, you have to put the foot in the up position." Did you watch the video? This is during sewing...... How am I going to sew IF the foot is in an "up" position? LMFAO*
This is my exact problem. rattle rattle rattle. Then sometimes it starts getting bunched up, because my thread came out of the slot. Since I owned the machine and very annoying..
He is right about turning off the machine. The Start button is super sensitive and it will start as if a ghost finger pushed the button.
Hi, did it move on you too? OMG, it's really scary!
Yay! It worked. I was going to take it to the shop for sewing machines. However, I fixed it myself with your help😀😷
Thank you
You are welcome and stay safe !!! ❤️❤️❤️❤️❤️❤️
You absolutely helped me understand my machine a bit more. Thank you!
You are welcome!
Omg, thank you. Unfortunately I had literally both tension issues with the bobbin so it was noisy as all get out. But you actually helped me fix that! Thank you so much!
You are welcome!
Thank you very much, I bought my brother se 600 just one month ago and I was have the same problem until I have seeing your video. Sorry for my English.
Glad you were able to fix it and you are welcome. Make extra mask and stay safe !!! ❤️❤️❤️❤️❤️❤️❤️
Thank you so much Jordan I’ve been trying to figure this out for a whole week. Nothing in the manual you are awesome I was losing hope🤨 you definitely helped me and I’m sure many more.
You are welcome. I'm glad you got it fixed!
Thanks a lot...it was very useful,I was irritated by that noise...now problem solved 😊😊❤
You are welcome!
your commentaries had me cracking up. I dont have the issue, but found you entertaining, so I watched til the end. hahaha
😂❤️😂❤️😂❤️😂❤️
Check out my channel under Video. There are a lot of Health Related Videos, it may helped you to stay healthy, especially Grounding. I have discovered many things that Doctors around the World don't even know and I am not a doctor, LOL.
You are genius!! This is a one million dollar fix
I'm glad you found this video and got it fixed! Please stay safe !!! ❤️❤️❤️❤️❤️❤️
Thank you for this video and the funny commentary, my frustration is gone 😭🙌🏾
You are welcome, stay safe!
Thank you. You’re a life preserver!
You are welcome!
Thank u so much .now I know what to do .even though I don't use it that much
👍
You are welcome!
Thank you so much so sharing your experiences I was so frustrated and about to throw my sewing machine out the door!! Lol
I know what you mean about "frustrations". I was using the machine for 3+ months before I figure out what it was. I'm glad you are able to find this video and that it helped you. Please BE CAREFUL if you have this machine or anything with electronic controls.... As stated in the video, I had the step controller out and the machine run by itself. So unplug when you are fixing it, cause it only takes 3 seconds to do. All your fingers are worth more than 3 seconds. STAY SAFE and HAPPY SEWING !!!
EDIT: *I forgot... You are welcome!*
Was Sooooo helpful for me. Thanks 🙏 a lot
You are welcome!
Thanks for the fix but when you put bobbin back in it's upside down thread should come of counterclockwise and you have it running clockwise. Just in case you are having a issue now with it.
I've been having problems when I try to see knits. To the point I have to turn my tension up all the way. I'm going to try this I'm thinking this is what the problem is. Thanks for sharing this.
You are so welcome!
Jordan, you are excellent in moving step-by-step and explaining! Great job and I am hoping this is my problem. Thank you so much! I learned a lot!
You are welcome and please stay safe!
Love this tutorial and love your accent so much
When you get a chance... Let me give you something that NO ONE in the world can and ALL FREE. I will lead to better health, I promise! Take a bit of time out and watch this recent video, how I made a HUGE Medical Discoveries.
LINK: ruclips.net/video/qk2WsJAZ2RI/видео.html