Also the double bearings are the same used in a dodge neon wheel bearing. Way cheaper at the auto parts store than mother deere! Thanks for the videos you are a pleasure to watch
@@farmerjohndoe2245 Thank you, first place I looked if I could get a cross reference number, Then next would be the industrial bearing houses. Thing to remember Warren does not have all day to find parts and did save his customer about $4K from a generic distributor.
Warren, I've never worked as a professional mechanic in any way shape or form. I've NEVER worked on heavy equipment. However, I'm a life long DIY guy and I enjoy your channel as you're a real life hard working blue collar American patriot figuring out problems and devising solutions. I salute you sir.
Prayers for the people of Weed California and surrounding area. Those affected are in dire need and can use the help of their fellow citizens, both Spiritually and physically. ❤️🙏❤️
Couple of thoughts: I know absolutely nothing about welding and I sorta refuse to educate myself about the fundamentals because I enjoy the mystery of why welders don’t electrocute themselves when they weld. I find the process amazing. Secondly, I do not take the food on my table for granted and I am thankful for you, Warren, and the millions of other craftspeople who make that possible for myself and family. The basics of life do matter. The hoards of individuals that dedicate their lives and talents matter too. My parents always, always had us say a blessing before every meal. It was meant for you and others that provide for us.
Like what you said about planning. Saying I always tell people who rush a job and wonder why it didn’t work is “Why is there never enough time to do it right, but always enough time to do it again “ !
Thanks for the repair tour Warren, Duke and Josie. In Florida when I was horse farming, we just baled grass fields for bedding in the stalls, sometimes we would get straw after folks combined their rye or oats. Humidity made it tough for bailing horse quality hay without it moulding inside the bales. It would look pretty, but two weeks later the bales would start carrying heat and get blue/green molds growing, bad for horses, okay for cows and other ruminants. Baled timothy/orchard grass and alfalfa blended fields for horse and cow hay in Western, NY just East of Rochester on a 70 acre farm back in the 1994 - 96 when I went back to school wanting to become a Vet, you know the dream...my brain could not handle university level calculus and the engineering Physics professor had a heart to heart with me and said I should think of a different career path... got that Biotech degree. Ended finally doing industrial maintenance work for twenty years and another Industrial degree while working full time. So folks I think should try out different things to make a living from and what clicks for them and not be stigmatized by getting dirty, greasy and sweating for a career. I remember that was where the guidance counselors would send the kids to tech classes because they did not fit in the high schools Ëducation"systems and everyone was told to go to college to be something important career-wise some day. I ran away from them and just sweated my way in the horse farming industry in Florida, until the more educated folks told me to go to school and open up my brains for more things and not waste them on the farm. I reflect on those choices today... getting older and grey...
Unfortunately Algebra nips a lot of kids in the bud coming out the gate from anything they'd be otherwise good at, and Calculus deals the final blow to others who might have made it. Some people who are otherwise good at what they are pursuing do not have the kind of thinking it requires to do these calculations of a certain design and it shouldn't be required.
@@jaredmayer3960 Ignorance has no boundaries... Proportional Integral Derivative I know what piping and instrument diagrams are for in process equipment designs I worked with them in the food industry and animal vaccine industry for over 14 years and also went to schools to become very experienced at how different systems work. It is never to late to learn something new...
@@jaredmayer3960 Proportional Integral Derivative Process control tuning Ignorance does not have any boundaries and it is never too late to learn something new... It was confusing sometimes when terms/acronyms/abbreviations in conversations were used without the context of the conversation. We finally had to create a database where I worked, so folks would have a common definition index easy to look up had over 1100 acronyms defined, used regularly across different departments.
When we say we appreciate the output you post to RUclips, we mean it Warren! I create my own content (unlisted drone videos I share with friends) and know how time consuming posting content can be.
I got wore out just watching you work. Jokes aside them machines are complicated and you make it look easy. Ain't no understatement in saying you keep things working. Which keeps farmers truckers and all the support behind them moving. Thank you for bringing us along.
Thanks Ernie for buying Warren and the Misses Dinner. I would do the same thing if given the chance. Really Appreciate the Videos and Honest Commentary, Warren.
Greetings Warren. Good to see that you enjoyed some time off fishing in Alaska with your wife. Seeing that cutting and welding being done next to the hay pile gives me the willies. I would be nervous as a long-tailed cat in a room full of rocking chairs without a fire hose or at least a large extinguisher handy.
I always love it when Josey badgers Duke, because he is so patient, but you know he is thinking this little monster needs to chill out, I'm older. Glad to see another video Warren, love story time to. G-d bless you, the family, and the fury criters.
Great video Warren really enjoy watching you fix or repair equipment and love to see Josey and Duke play and carry on while you are working on your repairs. Ernies the man for treating Warren and his wife for their meal stay safe Warren.
Pretty nice of that young man buying your dinner, there are good people in this world. As far as the service call to tighten up a fitting with two wrenches, we’ll it is to easy to make phone calls now days, and some people can’t think beyond the speed dial on the phone, not saying the customer isn’t on the ball, but sometimes easy is the answer. I think Josie loves her daddy, that’s what I think.😉😁 thanks for the ride along sir.
Warren, you could travel from farm to farm and you will find the same thing at all of them. My experience with farmers is they work their equipment till it breaks, fix it and repeat. Great video. Thanks for sharing.
Hi Warren 😃 thanks for another interesting video mate, pretty time consuming rebuild on those heads, I guess you found a bit of shrapnel inside from all those teeth munching each other,lol. Josie sure likes ragging on Dukus, he's pretty patient whith her, she's a comic , and cute as a button that's for sure, how big will she get I wonder ?.I'm looking forward to the next video, stay safe mate, best wishe's to you and your's, Stuart UK.
Warren you talk about aftermarket junk and you are so right, put aftermarket injectors in a John Deere 219 with a rebuilt injection pump and it smoked crazy looked like an old Mack, spent the 540 dollars for the new JD injectors and it is perfect. You talk about helpless people I tell them all the time if they were in a war zone they would not last long.
I am about as far south of the fire as you are north of it. I have friends who are going to be really hit hard by this, but they are alive. Seems like that north end of the valley and the mountains has just been hammered the past few years. Our number is gonna come up here, we have dodged a lot of bullets the last few years. The for Sale sign went up on our place yesterday, we are fleeing this insane asylum. I know a number of big companies who do the same program with their equipment. I used to help out at a friends shop on my days off and when one of their trucks would come in on the hook and the fleet gr was right there, crying alligator tears needing it yesterday ...we would find a way, but we waited for parts and that drove them nuts. More than once I recall him telling the Fleet guy "don't you remember when I worked on this thing last year, it was a "just get it running,well do it right in the off season? You wouldn't listen and let me fix the parts that I told you were going to go south next, and ya never brought it back, and now it is broke way worse, and gonna cost a ton more". Just like I told you. They never learned.Thanks Warren, you bring a little bit of sanity into a world in dire need of it.
Fires can and has wiped out suburbs let alone states here in Australia,be safe brother,hell man if you ever come to sydney Australia il pay for the food and beers for your self and mandy.. Hell man you guys helped me beat addiction,glad you had some good time off and a safe trip... Cheers guys 👌👌
Damn, that whole cutter bar was totally cooked. Why didn't the operator notice it before it got that bad? I'll bet the owner of the machine is mad as hell about that. Good luck on rebuilding that header on the swather. Good video, Warren....
I am glad you had a good dinner with your wife. He was doing you and your wife a favor, he probably got more out of paying for your dinner than you did. Another great video.
Thank you for the video Warren, I admit at my lunch break one particular farm dog I've known since she was a puppy I play with her and she loves climbing up stacked bales (she ani't no fear'd of heights) we play a game of Peekaboo, where I run to one end of the stack and she tries to find me and looking over then I run to the other end and so on, I guess I should be acting my age by now.👍
👍👍 Evenin feller...like u say ,there is some decent people out there in this fucked up world..glad someone did u a kindness..but anyway,stay safe out there with all the fires u have out west... thanks for another video...take care 👍👊
Wow I've been watching your channel since Josie's been around your dog she is getting big holy schnikes what are you feeding that dog nice she is a loyal companion man your friend Anthony
You said exactly what I was thinking.. that didn’t just wear out last week. Should have been gone through during winter but no let’s wait till hay season then is 911 get my swather rebuilt so I can go cut hay. Some people
Hey Warren, that equipment does need a serious rebuild. Maybe you should have them bring it to you in the winter. At least it will get done correctly. Thanks much for the video. Great watching!
The Fire at weed was a bad one!. In a former life i was a chief engineer at a saw mill,in charge of the maintenance and construction of everything mechanical in the plant. Fire was a ever present problem although the mill was actually blown down every night to clear up saw dust that escaped from the extraction devices around the saws etc. I notice a comment that the Weed Mill was nearly defunct and that often means that people who have no place being in such places create mischief. I see in the pics posted on line that a few classic cars including a Plymouth road runner (?) which looked to have gotten so hot it's alloy wheels are now shiny pools of metal on the road. We know all too well down here in Australia how devastating fires are,so thoughts and prayer to those who will now have to rebuild their lives .
I'm not a conspiracy theorist, but there comes a point when it looks like a lot of these fires are deliberate, there's just too many of them in key production facilities
Warren, with JD, you're buying a name nothing more. It's unfortunate that their quality has gone downhill. Hahahaha Jose is an awesome dog. Great video as always, cheers :)
I have watched Wes from onelonelyfarmer work on these headers several times. I have never seen one as far gone as this one though ! As for rounded off nuts, I once worked on a gravel/sand extraction plant for six months and on the shaker screens a nut would wear oval in a week and right off in two. Big vice grips if you can get to them, great for your hand strength !
They are the warse cutter bars under the sun. New Holland make a good one. They don't make bad farm machinery. It's the tractors. They are a bit flimsy.
You probably know by now that only one large building at the mill site burned. It appeared to be lumber storage, but that is a guess. The mill proper is fine and was not affected at all.
Hello Warren. I’m no engineer but could there be any stress fractures on the gears which are not being changed. Could magnetic flux powder check for this. Just worried about not changing the whole lot for fresh. Not trying to tell you your job as I’m about 5% of your ability and knowledge.
We had 6 people arrested at our fire department for setting fire's. They said they did it for more funding. They burned down about 75 building's in 2.5 year's
Hi Warren what breed of dog is Josie she does look gorgeous and you can see she likes her belly rubs. Is she your new truck companion how old is josie . I think its the first time i've seen her in your vid's unless i've missed a video of you telling us about josie.
Oh yes Warren, they use it and use it, till it's fucked, and then they are looking at you like it's your fault. I just say, add up all the time you should of spent maintaining it, and that's about how long it's going to take me to put it right.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
www.discmowerdoctor.com/. That's the link to the aftermarket disc mower parts.
thanks Warren for sharing...
Also the double bearings are the same used in a dodge neon wheel bearing. Way cheaper at the auto parts store than mother deere! Thanks for the videos you are a pleasure to watch
@@farmerjohndoe2245
Thank you, first place I looked if I could get a cross reference number, Then next would be the industrial bearing houses.
Thing to remember Warren does not have all day to find parts and did save his customer about $4K from a generic distributor.
I reckon Ernie did what a bunch of us fellers would Wana do! Keep up the minty work feller!
Thank you there partner
Ernie is a good dude peg!
Warren, I've never worked as a professional mechanic in any way shape or form. I've NEVER worked on heavy equipment. However, I'm a life long DIY guy and I enjoy your channel as you're a real life hard working blue collar American patriot figuring out problems and devising solutions. I salute you sir.
Prayers for the people of Weed California and surrounding area. Those affected are in dire need and can use the help of their fellow citizens, both Spiritually and physically. ❤️🙏❤️
People like Ernie prove there is good people still out there. Few and far between but there out there.
Nice job Ernie!!!
Couple of thoughts: I know absolutely nothing about welding and I sorta refuse to educate myself about the fundamentals because I enjoy the mystery of why welders don’t electrocute themselves when they weld. I find the process amazing. Secondly, I do not take the food on my table for granted and I am thankful for you, Warren, and the millions of other craftspeople who make that possible for myself and family. The basics of life do matter. The hoards of individuals that dedicate their lives and talents matter too. My parents always, always had us say a blessing before every meal. It was meant for you and others that provide for us.
Ernie - Big ups to you for getting Warren & his Wife meal 👍🍺/ THANKS for the video Warren ..
Like what you said about planning.
Saying I always tell people who rush a job and wonder why it didn’t work is “Why is there never enough time to do it right, but always enough time to do it again “ !
I’m stealing that, very fitting for my work environment.
Love that expression about proper planning! So true. Similar to the. “A lack of planning on your part does not constitute and emergency on my part”.
It's guys like you that keep this world moving. Thank you.
Thanks for the repair tour Warren, Duke and Josie.
In Florida when I was horse farming, we just baled grass fields for bedding in the stalls, sometimes we would get straw after folks combined their rye or oats. Humidity made it tough for bailing horse quality hay without it moulding inside the bales. It would look pretty, but two weeks later the bales would start carrying heat and get blue/green molds growing, bad for horses, okay for cows and other ruminants.
Baled timothy/orchard grass and alfalfa blended fields for horse and cow hay in Western, NY just East of Rochester on a 70 acre farm back in the 1994 - 96 when I went back to school wanting to become a Vet, you know the dream...my brain could not handle university level calculus and the engineering Physics professor had a heart to heart with me and said I should think of a different career path... got that Biotech degree. Ended finally doing industrial maintenance work for twenty years and another Industrial degree while working full time.
So folks I think should try out different things to make a living from and what clicks for them and not be stigmatized by getting dirty, greasy and sweating for a career.
I remember that was where the guidance counselors would send the kids to tech classes because they did not fit in the high schools Ëducation"systems and everyone was told to go to college to be something important career-wise some day. I ran away from them and just sweated my way in the horse farming industry in Florida, until the more educated folks told me to go to school and open up my brains for more things and not waste them on the farm.
I reflect on those choices today... getting older and grey...
Unfortunately Algebra nips a lot of kids in the bud coming out the gate from anything they'd be otherwise good at, and Calculus deals the final blow to others who might have made it. Some people who are otherwise good at what they are pursuing do not have the kind of thinking it requires to do these calculations of a certain design and it shouldn't be required.
So many of us like you. Just finding ways to make money and get by. Old and grey and contemplating the paths and choices...
@@HAL-dm1eh
Funny thing was I could tune process control loops PID without a lick of math on paper in my head and it is all calculus based.
@@jaredmayer3960
Ignorance has no boundaries...
Proportional
Integral
Derivative
I know what piping and instrument diagrams are for in process equipment designs I worked with them in the food industry and animal vaccine industry for over 14 years and also went to schools to become very experienced at how different systems work.
It is never to late to learn something new...
@@jaredmayer3960
Proportional
Integral
Derivative
Process control tuning
Ignorance does not have any boundaries and it is never too late to learn something new...
It was confusing sometimes when terms/acronyms/abbreviations in conversations were used without the context of the conversation.
We finally had to create a database where I worked, so folks would have a common definition index easy to look up had over 1100 acronyms defined, used regularly across different departments.
When we say we appreciate the output you post to RUclips, we mean it Warren!
I create my own content (unlisted drone videos I share with friends) and know how time consuming posting content can be.
There's no other channel that I click like before watching.
I definitely enjoy the area you live and work in only a well rounded easy going mechanic like yourself can really be successful in that area 👍
I enjoyed the whole video. Thank you for making it. Putting together videos is not easy work.
Thanks for buying our guy dinner, you are a good man!
Warren I watch and enjoy your videos because they are real without filters, it makes it real!!!!
I got wore out just watching you work. Jokes aside them machines are complicated and you make it look easy.
Ain't no understatement in saying you keep things working. Which keeps farmers truckers and all the support behind them moving. Thank you for bringing us along.
Thumbs up to Ernie!
Thanks Ernie for buying Warren and the Misses Dinner. I would do the same thing if given the chance. Really Appreciate the Videos and Honest Commentary, Warren.
Greetings Warren. Good to see that you enjoyed some time off fishing in Alaska with your wife.
Seeing that cutting and welding being done next to the hay pile gives me the willies. I would be nervous as a long-tailed cat in a room full of rocking chairs without a fire hose or at least a large extinguisher handy.
Good deal ernie!! Good deed will return one day! 👍🏻
I always love it when Josey badgers Duke, because he is so patient, but you know he is thinking this little monster needs to chill out, I'm older. Glad to see another video Warren, love story time to. G-d bless you, the family, and the fury criters.
If our paths ever cross, supper will be on me
Have a great day Warren
Great video Warren really enjoy watching you fix or repair equipment and love to see Josey and Duke play and carry on while you are working on your repairs. Ernies the man for treating Warren and his wife for their meal stay safe Warren.
It is just great that you are able to show as much as you do without the aid of a cameraman. Thank you for your videos Warren. .
Pretty nice of that young man buying your dinner, there are good people in this world. As far as the service call to tighten up a fitting with two wrenches, we’ll it is to easy to make phone calls now days, and some people can’t think beyond the speed dial on the phone, not saying the customer isn’t on the ball, but sometimes easy is the answer. I think Josie loves her daddy, that’s what I think.😉😁 thanks for the ride along sir.
It's like they deprogramed the controller to ignore most everything and just work on fixed values. Thanks Warren!
Thanks Ernie, for takin care of Warren and the Mrs.
Your one of the best all around Mechanic's I have ever seen
Yup! The privilege we have is to work to make ends meet! Good vid waiting on part two of the assembly Warren. 👌
Camera work is excellent for the time you handle it.👍
Another awesome job Warren thank you for the video
Good to see you back at it Warren hope Alaska was nice and your knee is feeling better
Thoughts and Prayers going out to everyone we all need it!!!! GOD BLESS!!!
Warren, you could travel from farm to farm and you will find the same thing at all of them. My experience with farmers is they work their equipment till it breaks, fix it and repeat. Great video. Thanks for sharing.
Another
Great video
I enjoy all your Videos
Thank's
With that kind of parts outlay, I hope your customers are at least, paying for the replacement parts up front. Great videos.
may all your family and you be safe out there, Amen
love the story of Earnie ....... thumbs up
Hi Warren 😃 thanks for another interesting video mate, pretty time consuming rebuild on those heads, I guess you found a bit of shrapnel inside from all those teeth munching each other,lol. Josie sure likes ragging on Dukus, he's pretty patient whith her, she's a comic , and cute as a button that's for sure, how big will she get I wonder ?.I'm looking forward to the next video, stay safe mate, best wishe's to you and your's, Stuart UK.
Congratulations on 105k subscribers Warren.👍
Thanks for the tip on the disc mower parts!! Left your video to check out immediately. 👍👍 awsome
What is the website address?
@@stockholmfarmer i had to search a litte bit because Warren didn't remember it exactly. Search "Disc Mower Doctor" they have alot of inventory.
Thanks for your time and consideration Warren 🚜🤠😎🛠️🚜🚜🚜🚜
Haha what a small world I used to work for rb brown’s and I know Ernie he’s a good guy! Hi Ernie!✌️✌️
Another great video Warren,thanks for sharing
It's sure something how a little green can cost so much more for parts
Safe travels 🙏
Warren you talk about aftermarket junk and you are so right, put aftermarket injectors in a John Deere 219 with a rebuilt injection pump and it smoked crazy looked like an old Mack, spent the 540 dollars for the new JD injectors and it is perfect. You talk about helpless people I tell them all the time if they were in a war zone they would not last long.
Warren great Video always enjoy to get a look into your toolbox 🤣 and listen to your story
👍thanks for sharing bud! Take care now.
I would love to be Warren's assistant! So much troubleshooting that I love plus I could bring my dog to work. How much better could that be?
I am about as far south of the fire as you are north of it. I have friends who are going to be really hit hard by this, but they are alive. Seems like that north end of the valley and the mountains has just been hammered the past few years. Our number is gonna come up here, we have dodged a lot of bullets the last few years.
The for Sale sign went up on our place yesterday, we are fleeing this insane asylum.
I know a number of big companies who do the same program with their equipment. I used to help out at a friends shop on my days off and when one of their trucks would come in on the hook and the fleet gr was right there, crying alligator tears needing it yesterday ...we would find a way, but we waited for parts and that drove them nuts. More than once I recall him telling the Fleet guy "don't you remember when I worked on this thing last year, it was a "just get it running,well do it right in the off season? You wouldn't listen and let me fix the parts that I told you were going to go south next, and ya never brought it back, and now it is broke way worse, and gonna cost a ton more". Just like I told you.
They never learned.Thanks Warren, you bring a little bit of sanity into a world in dire need of it.
Always fun to go to work with ya Warren.
Fires can and has wiped out suburbs let alone states here in Australia,be safe brother,hell man if you ever come to sydney Australia il pay for the food and beers for your self and mandy.. Hell man you guys helped me beat addiction,glad you had some good time off and a safe trip... Cheers guys 👌👌
@@springer3783 no need to be a dick, guy.
Keep on keeping on brother! You can do it!
Cool. Learned about Huck LockBolts; now back to your video!!
Congrats on the 100K subs!!
greetings WWW from sunny Queensland Australia , good vid this one , cheers mate ,
You deserve a easy job now and then all the best from the UK
Damn, that whole cutter bar was totally cooked. Why didn't the operator notice it before it got that bad? I'll bet the owner of the machine is mad as hell about that. Good luck on rebuilding that header on the swather. Good video, Warren....
Shit flow's downhill
Thanks for the share Warren. as always.... love the videos. catch ya on the next one!
I am glad you had a good dinner with your wife. He was doing you and your wife a favor, he probably got more out of paying for your dinner than you did. Another great video.
Thank you for the video Warren, I admit at my lunch break one particular farm dog I've known since she was a puppy I play with her and she loves climbing up stacked bales (she ani't no fear'd of heights) we play a game of Peekaboo, where I run to one end of the stack and she tries to find me and looking over then I run to the other end and so on, I guess I should be acting my age by now.👍
Sounds to me like it’s doing both of you good. Enjoy every moment.....
Thank you.👍
I do that and I thought I was nuts, enjoying my dogs. Warren it is great to see you back more relaxed, thank you for your time and video's
👍👍 Evenin feller...like u say ,there is some decent people out there in this fucked up world..glad someone did u a kindness..but anyway,stay safe out there with all the fires u have out west... thanks for another video...take care 👍👊
Damn good seeing you, excellent videos , having bad ol day, video makes it gooder!!!
Wow I've been watching your channel since Josie's been around your dog she is getting big holy schnikes what are you feeding that dog nice she is a loyal companion man your friend Anthony
That's some job there with a scary scope for oil leaks, is there a special king of food grade gear oil that goes in that set of gears.
Good work warren 👍🔧
You said exactly what I was thinking.. that didn’t just wear out last week. Should have been gone through during winter but no let’s wait till hay season then is 911 get my swather rebuilt so I can go cut hay. Some people
Never seen one of these apart. Very interesting.
Closed captions for us deaf guys is a big help when they're enabled. I'd bet my neighbors are tired of listening to my tv.
Warren amazes me in every video stay away from cells phones and video games kids.
they also need to check the cutter head oil every once in a while, too
Hey Warren has anyone ever showed up at the shop just to see you because of your video's ?
Hey Warren, that equipment does need a serious rebuild. Maybe you should have them bring it to you in the winter. At least it will get done correctly. Thanks much for the video. Great watching!
But they need to use it now!
🤣🤣and I guess they can just call it good for the rest of the season
I had a feeling the neutral drop protection was the problem with that allison.
The Fire at weed was a bad one!. In a former life i was a chief engineer at a saw mill,in charge of the maintenance and construction of everything mechanical in the plant. Fire was a ever present problem although the mill was actually blown down every night to clear up saw dust that escaped from the extraction devices around the saws etc. I notice a comment that the Weed Mill was nearly defunct and that often means that people who have no place being in such places create mischief.
I see in the pics posted on line that a few classic cars including a Plymouth road runner (?) which looked to have gotten so hot it's alloy wheels are now shiny pools of metal on the road.
We know all too well down here in Australia how devastating fires are,so thoughts and prayer to those who will now have to rebuild their lives .
I'm not a conspiracy theorist, but there comes a point when it looks like a lot of these fires are deliberate, there's just too many of them in key production facilities
My thoughts and prayers to the folks there in Weed, Ca.So sad. Todd Konoske the retired trucker.
Warren, with JD, you're buying a name nothing more. It's unfortunate that their quality has gone downhill. Hahahaha Jose is an awesome dog. Great video as always, cheers :)
I have watched Wes from onelonelyfarmer work on these headers several times. I have never seen one as far gone as this one though ! As for rounded off nuts, I once worked on a gravel/sand extraction plant for six months and on the shaker screens a nut would wear oval in a week and right off in two. Big vice grips if you can get to them, great for your hand strength !
Dremel, chisel, and hammer works too.
Lots of labor to rebuild the header!
Don’t forget it’s hot as hell out there right now! Try and keep it cool sir!
What goes around comes around again. We all know you work hard, a lot of the time in not very good weather.
They are the warse cutter bars under the sun. New Holland make a good one. They don't make bad farm machinery. It's the tractors. They are a bit flimsy.
You probably know by now that only one large building at the mill site burned. It appeared to be lumber storage, but that is a guess. The mill proper is fine and was not affected at all.
That's good, I heard the whole mill was gone.
There are a few good guys left 🇺🇸🇺🇸
😊
Hello Warren. I’m no engineer but could there be any stress fractures on the gears which are not being changed. Could magnetic flux powder check for this. Just worried about not changing the whole lot for fresh. Not trying to tell you your job as I’m about 5% of your ability and knowledge.
We had 6 people arrested at our fire department for setting fire's. They said they did it for more funding. They burned down about 75 building's in 2.5 year's
Is that John Deer even worth fixing? Think I'd switch to Red equipment
oneloney farmer spent easy 800-900 for the gears each, turtles where easy 500 a piece I think last time he replaced his.
good vid warren
Disk mower doctors in pa where I get some parts from
where are the trees on the hills?
👍
Good dogs
Hi Warren what breed of dog is Josie she does look gorgeous and you can see she likes her belly rubs. Is she your new truck companion how old is josie . I think its the first time i've seen her in your vid's unless i've missed a video of you telling us about josie.
may wes has cheaper options in some part for that
All we can do is brace for impact... For the rest of our lives.
Oh yes Warren, they use it and use it, till it's fucked, and then they are looking at you like it's your fault.
I just say, add up all the time you should of spent maintaining it, and that's about how long it's going to take me to put it right.