@@BurningRubberr i just want to ask them if they could make a slightly bent wrench for rear springs for a b7 a4 cause you have to take out the spring to adjust them or compress the spring
Get OBD11 and get some things programmed. Disable the orange side marker lights. Turn on the needle sweep at start up. Easy entry when you enter/leave the car as the seats goes all the way back, turn on in-car wifi, you can change the start up screen to S4/RS4 which also changes the gauge design. Lots of other things :)
Phi Nguyen well depending on market, you can enable the external SIM card. Or you can use your phone as the hotspot. Also depending on year, at least in Canada, you can activate Google Earth with your phone as hotspot.
I have the same one in black, dropped it with the hr springs and slapped red brushed 20” Forgiatos on there. Wish I can send a pic to show y’all how sick it looks
When your adjusting the height you mentioned the spring decompressing, would that not effect spring preload? Is it the spring that changes length or the shock tube?
Hi, love your video and I am interested in it! The requirement said for models with build date up to 7/11/16, w/ 53mm front strut body, do you know how can I check this info on my car? Thanks!
It’s hard to tell when it was actually manufactured. We bought the 53mm first and and ended up replacing with the 48.5mm. My guess is that you would need the 48.5mm as well
CHECK OUT OUR NEW MERCH
bit.ly/BurningRubberMerch
EARLY BIRD OFFER: USE PROMO CODE "AUDI" for 20% Discount
You should’ve done a video how to do and everything you need in depth
Thank you for your honest feedback.
Glad to see, that you are happy with our H&R coilovers!
Best regards,
your H&R team
Thanks for watching!
Is this actually h&r
Yes
@@BurningRubberr i just want to ask them if they could make a slightly bent wrench for rear springs for a b7 a4 cause you have to take out the spring to adjust them or compress the spring
The adjustable part is below the spring not above it like this car
Totally paint the front crash bar black! Good video tho!!
My thoughts exactly. Did this to mine and it looks great!
Yup asap 😂
Would you say installing coilovers will make the install less tedious because you skip the while spring compression and strut replacement?
Rims defo need to go, also badges at the back, nice video!
Rims will definitely be upgraded in a future video and bandages have been removed. Any other recommendations? Thanks for watching!
Burning Rubber Im getting this car too soon, would love to see if you could tint your head lights rear and front would be badass
Get OBD11 and get some things programmed. Disable the orange side marker lights. Turn on the needle sweep at start up. Easy entry when you enter/leave the car as the seats goes all the way back, turn on in-car wifi, you can change the start up screen to S4/RS4 which also changes the gauge design. Lots of other things :)
How do you use OBD 11 to turn on in-car wifi?
Phi Nguyen well depending on market, you can enable the external SIM card. Or you can use your phone as the hotspot. Also depending on year, at least in Canada, you can activate Google Earth with your phone as hotspot.
I have the same one in black, dropped it with the hr springs and slapped red brushed 20” Forgiatos on there. Wish I can send a pic to show y’all how sick it looks
What do you think performance wise is it better than BCRacing BR series?
Whoa, it snows in Florida? That's crazy!
Nope, that’s in Colorado😁
When your adjusting the height you mentioned the spring decompressing, would that not effect spring preload? Is it the spring that changes length or the shock tube?
how was the ride quality after?
Did you adjust the camber? The wheels look like they are tucked in..
Grille: bit.ly/rs4grill
Dynamic Turn Signals: bit.ly/TurnSignalb9
Carbon Fiber Trunk Spoiler Wing bit.ly/SPOILERA4B9
Carbon Fiber Center Console Gear Shift Panel Cover bit.ly/CoverPanelB9A4
Do u need to cut the bump stops since u are sitting so low ? And do you encounter any knocking sound when you turn your steering wheel ?
Nope been great!
Drop looks great. That r in quattro though.
Hey man I just got a B9 A4 and I'm stuck on suspension. Are your stock wheels 17s? Was the car lowered all the way or did it have more to drop?
Yes they were 17" now on 19" Thanks for watching!
Hi, love your video and I am interested in it! The requirement said for models with build date up to 7/11/16, w/ 53mm front strut body, do you know how can I check this info on my car? Thanks!
Unfortunately we weren’t able to check that info and ordered the the wrong ones the first time. What year is your Audi?
Burning Rubber 2017 B9 Audi A4
It’s hard to tell when it was actually manufactured. We bought the 53mm first and and ended up replacing with the 48.5mm. My guess is that you would need the 48.5mm as well
Does the ride quality change a lot from stock?
A bit more bumpier but not much
Thanks for sharing guyss!!
Do you guys dock?
I've got the same year A4 Allroad and I've been looking for a good lowering kit to throw on there. What kit did you guys go with in this?
H&R street performance model coilovers kit
19s rse 102 wheels or vossen hf4t 20s
i would spray frame rail behind bumper black, so it looks better
Done
@@BurningRubberr very good, and change xenon to LED headlights
Get some damn jack stands! Having the car on a floor jack isn’t that smart!
Yes sir, thanks!
Right? Who buys air impact and other tools before buying safety equipment? Someone’s priorities are backwards.
20s pls
Too bumpy
i have the same car go with 19s
Does it rub at all?
Nope
Burning Rubber i just ordered these after the video for my gti! Thanks for the overview
Definitely go 20”
After a year I gotta say although it looks good, the drive is super uncomfortable.