Pixel 6 Pro Mowei Screen Protector || An Alternative to Whitestone?

Поделиться
HTML-код
  • Опубликовано: 31 дек 2024

Комментарии • 75

  • @Hanssum
    @Hanssum 2 года назад +1

    Thanks a lot for the recommendation! And BTW also a good taste for coffee! Illy is my number one 😁

  • @skullcrusher_1
    @skullcrusher_1 3 года назад +3

    Thanks for recommending. I have it on mine right now and the fingerprint sensor is working flawlessly. 😁

    • @SomethingMobile
      @SomethingMobile  3 года назад +2

      Awesome, and you are welcome. Did you add any weight to the screen protector during install?

    • @skullcrusher_1
      @skullcrusher_1 3 года назад +2

      @@SomethingMobile I actually didn't add any weight at all, just let it completely spread out waited like 2 minutes then I blasted the hell out of it with the UV light. I also registered my main thumb twice.

    • @skullcrusher_1
      @skullcrusher_1 3 года назад +1

      @@SomethingMobile update let's take that down to about 90% of the time it works. 😂😂😂. Had a few hiccups today unless I put my entire pad of my thumb down...which was embarrassing because I was at the checkout counter trying to unlock my phone to pay! 😂😂😂

  • @billbenest
    @billbenest 3 года назад +3

    Great video. The one thing I noticed on the official install guide was there was a little sticker on the screen protector that shows how to lay it on the phone. I'm guessing your protector didn't have it so yours might be upside down and that might be the reason for your fingerprint not working as well as others.
    Ordered mine coming Friday will update👍
    Edit.. I watched the official video again and it looks to be a galaxy device in the video so therein lies the confusion.

    • @SomethingMobile
      @SomethingMobile  3 года назад

      Yes, that was confusing to me as well. That's why I used the quarters as a weight. I guess no weight should be used during this install.

  • @pascalmeyer8768
    @pascalmeyer8768 3 года назад +1

    I checked Whitestone. They are sold out of the glass only package. And me being in Canada, it's like 80$with shipping fees taxes import etc. Haven't seen it on Amazon so I ordered the one in your clip. Saw couple of people saying the glue is sliding all over the place upen install. But that's because their table (or whatever) was not leveled even. You got lucky in your clip. I must say dome glass has saved my phone's throughout the years... Many times. Hope this one is as good as I hope.

    • @SomethingMobile
      @SomethingMobile  3 года назад

      It works good enough. There is no need to use a weight in the install. It’s better if you don’t use one. Good luck my friend.

  • @RakeshRoshanRana
    @RakeshRoshanRana 2 года назад +1

    I use the same brand for Samsung Galaxy S21 Ultra.... re register your fingerprints and it will work flawlessly everytime without failure.And during UV curing, just put something on the fingerprint sensor part for first 20 seconds...

    • @SomethingMobile
      @SomethingMobile  2 года назад +1

      Hey man I appreciate your input. The only problem with this is the finger pen sensor on the Samsung devices works differently than the ones on the The pixel 6, and 6 pro.
      Something weird happens to how the light bends and reflects off of the surface of the glass when you add weight to the pixel six pro while doing the screen protector install. This brand even states on their website not to add any weight. Normally a little bit of weight does help, but I did this install incorrectly in this video and it caused the fingerprint sensor not to work for me.
      This being said. I redid the install off camera and the fingerprint sensor got marginally better. I then installed the white stone dome glass and it was much better. So I don’t know what the differences but it seems that white stone domes offering for the pixel six and six pro just works a little bit better.
      Thank you again for offering your experience and opinion.

    • @RakeshRoshanRana
      @RakeshRoshanRana 2 года назад

      @Something Mobile thanks for replying....I guess both are ultrasonic sensors (not sure abt Pixel which may be an optical one).
      Thanks for the video and keep up the good work...wish you best of luck.

  • @paulhughes3961
    @paulhughes3961 3 года назад +1

    I will find out soon because I just ordered it.

    • @SomethingMobile
      @SomethingMobile  3 года назад

      Hopefully it works for you. Some people are saying it's best to not use a wieght during the install. They say the website states not to use a wieght. I did a reinstall and didn't use a wieght... It's a "little" better, but my fingerprint really is hard to scan due to dry skin. Please let me know how it works out. 👍👍

  • @erichahn6111
    @erichahn6111 2 года назад +1

    This worked well for me; fingerprints and all. I was skeptical at first but after the install I'm impressed. Use over time will tell if this is great or ok but I would purchase again after seeing how well the fingerprint works after rescanning.

    • @SomethingMobile
      @SomethingMobile  2 года назад

      I so wish is worked for me as well. I tried a second install with now weight added. Still a 3 outta 10. Weird question but is your thumbprint fairly visible? Mine isn’t so good after years for landscape work.

    • @erichahn6111
      @erichahn6111 2 года назад

      @@SomethingMobile it dosnt have a visible circle like other stick ons I've had. I had a good stick on at one time but I broke it and the visible circle was mildly annoying. I'm on a galaxy 21s ultra so it's probably better than what you used it on in your video. I was tired of other screen protectors not reading a finger print so I tried this today and so far happy. My finger print is visible on my thumb as I do office work now.

  • @Thefastlane425
    @Thefastlane425 3 года назад +2

    I love when dudes have their kids as their wallpaper.

  • @416seppi
    @416seppi 2 года назад +1

    Whitestone does have a screen protector for Pixel6 pro

    • @SomethingMobile
      @SomethingMobile  2 года назад

      This video was done before whitestone made a screen protector.

  • @mmedina9393
    @mmedina9393 3 года назад +2

    Whitestone dome is now available for the pixel 6 pro!

    • @SomethingMobile
      @SomethingMobile  3 года назад +4

      @Mark Medina, yes! Thank you for the update. I’ve been checking Whitestone since the 6 Pro pre-order. Dude this comment helped so much. I just placed a pre-order for the WS 6Pro with 10% off. Should ship on the 28th. Can’t wait to make that vid.

  • @Zetsumei88
    @Zetsumei88 3 года назад +1

    Used this to replace my border adhesive dot matrix and definitely a big upgrade. Only issue is debris in the glue from the manufacturing facility I assume. I had two packs and after two shots with small partcles showing up each time I opened the glue and poured it into a clean container. I immediately saw particles floating around in the loca. Opened the other box and did the same and saw debris in the liquid as well. But overall still an excellent product and I'm assuming could just be a contamined batch of adhesive. Going to use it till I get my WD next year.

    • @SomethingMobile
      @SomethingMobile  3 года назад +1

      Thank you for sharing your experience 🙂👍

    • @josiahstiffler
      @josiahstiffler 3 года назад +1

      @@SomethingMobile Whitestone has them now!! Would you say whitestone is the best in UV protectors?

    • @SnowBunnyMan
      @SnowBunnyMan 3 года назад +1

      @@josiahstiffler check out their video. nobody beats them.

  • @jeromegold3216
    @jeromegold3216 3 года назад +1

    Great content. When you opened the box didn't you see the weight that came with it? That's what I used on the fingerprint scanner. Thank you for mentioning me in your video. It's a hit or miss when putting the phone in the otterbox defender pro. But it is a definite problem when using supcase unicorn beetle pro. That's why I switched from glass screen protectors to the Amfilm elastic skin screen protector. It can be used on any case. And I used a lot of different case. I like verity. But it works with supcase, otterbox, ghostek, and a lot more. Have a great weekend.

    • @SomethingMobile
      @SomethingMobile  3 года назад +1

      Thank you. I’ve looked a few times to see if i fell from the box or I misplaced it somehow. I really think it didn’t come with a weight. The next install would include 10 quarters. Lol. I’ll take a look at the elastic skin. Thanks for recommending. 🙂👍

    • @jeromegold3216
      @jeromegold3216 3 года назад +1

      @@SomethingMobile you're welcome. And marry Christmas and happy new year 🎉

  • @volcalstone
    @volcalstone 3 года назад +1

    You opened the wrong side of the loca glue. Open up the black cap instead. It will drip a little slow but just be patience with it. I believe you could just twist the other end so that it will break off that internal black tab on the inside. This should help with the flow but I don't think it's necessary to do though.
    I got a similar kit but did my S21 Ultra and it went totally great. The ultrasonic FPS works just fine and better then I expected. I believe the FPS on the Pixel 6/6 Pro are similar to the ones found on the S20s last year. For my S21 Ultra there was a weight provided along with a clear placement sticker already on the screen protector.
    I would honestly pick this kinda kit over anything Whitestone Dome has to offer. It was just simple and straight to the point. I bet it's way more affordable too.

    • @SomethingMobile
      @SomethingMobile  3 года назад +1

      Thanks for your thoughts and helpful tips. 🙂🙏

  • @Coco1477
    @Coco1477 3 года назад +1

    How did you get back logo colored like that? Is it a sticker? If so where could I buy it?

    • @SomethingMobile
      @SomethingMobile  3 года назад

      Yes, go to Dbrand.com. Look for the logo skins.

    • @SomethingMobile
      @SomethingMobile  3 года назад

      It's the colored logo 👍

    • @Coco1477
      @Coco1477 3 года назад

      @@SomethingMobile thank you for responding!

  • @eleyedon-r8d
    @eleyedon-r8d 3 года назад +2

    I have this screen protector but on the install... I didn't use the coin thing which I think made the difference with the fingerprint scanner. The adhesive cured evenly and I think that's why on your install , there is a bit of inconsistency of the adhesive right by the sensor. My fingerprint sensor works like when I don't have the screen protector. Hope that info helps

    • @SomethingMobile
      @SomethingMobile  3 года назад +2

      Awesome! Okay, I have two more screen protectors. Would be interesting to see if I try an install with more weight, and the other with no weight. Thanks for sharing your experience.

    • @tonycapil1022
      @tonycapil1022 3 года назад +1

      @@SomethingMobile If you go to their amazon page they state "NOTE: Pixel 6 Pro do not need to put on weight" They also state that putting weight on will cause a round circle on the fingerprint area which will interfere with the optical sensor.

    • @SomethingMobile
      @SomethingMobile  3 года назад

      @@tonycapil1022, yes, thank you so much.

  • @SomethingMobile
    @SomethingMobile  3 года назад

    Hey guys so I am aware that the company that makes this brand of screen protector states on the website and in a note on Amazon it is best not to apply weights during the install of the screen protector.

  • @nitramon
    @nitramon 3 года назад +2

    Fun fact , I live in Germany in that exact City this screen protector is from

  • @guillaumerousseau3653
    @guillaumerousseau3653 3 года назад

    I can't find one on Amazon for Google Pixel 6. I don't have the Google Pixel 6 Pro.

    • @SomethingMobile
      @SomethingMobile  3 года назад

      Please consider these. Here’s an associate Amazon link. amzn.to/3FrKVyR

  • @thanhphan670
    @thanhphan670 3 года назад +1

    This screen protector doesn't seem to have a cutout for the front camera. Does it affect the camera quality and the light and proximity sensors at all? Thanks for the great video!

    • @SomethingMobile
      @SomethingMobile  3 года назад +1

      I really haven't noticed a negative effect of the glass over the camera or sensors. 👍

  • @chrism790
    @chrism790 3 года назад +1

    Great video... subbed!

  • @kingoftf
    @kingoftf 3 года назад +1

    The weight should not (!) be used with the 6pro, there's a info in the description on Amazon

    • @SomethingMobile
      @SomethingMobile  3 года назад

      At the time of this video being made the video the company had on Amazon was showing to use a weight. The information that came in the box also said refer to the video. I watched it a few times and did exactly the same in my install. I did a reinstall last week to see if it would be better without the weight. That install took the fingerprint recognition from a 4 out of 10 to a 6 out of 10. It's a little better, but not much. Thanks for taking the time to leave a comment.

  • @anthonyparker1869
    @anthonyparker1869 3 года назад +1

    Thanks for the video. I will definitely be trying this on my Pixel 6 Pro. Any updates after a few days? Any issues other than the fingerprint sensor? Have you tried adding the finger multiple times?

    • @SomethingMobile
      @SomethingMobile  3 года назад

      I’m loving the glass feel and look. It’s a lot better than TPU. I’m happy with it. The fingerprint isn’t working unless the damp finger approach. If I was to try the install again I would use more weight. Update: I used no weight and it is better but not great.

    • @zmcdaniel24
      @zmcdaniel24 3 года назад

      @@SomethingMobile the description says not to use weight

    • @SomethingMobile
      @SomethingMobile  3 года назад

      @@zmcdaniel24 yes you are correct thank you.

  • @CraigMcAnuff
    @CraigMcAnuff 3 года назад +1

    Great video! Thanks very much for this as I had also contacted Whitestone Dome to see if they'd make a tempered glass screen protector for the P6 Pro and they said: 'no'. I've been looking for a good equivalent for a while now and your video is enticing!

    • @SomethingMobile
      @SomethingMobile  3 года назад +1

      I love this phone and it needed a glass screen protector to give its best experience. It really does make all the difference using glass instead of TPU.

    • @russell8400
      @russell8400 3 года назад +4

      Hey... Just so you know... Whitestone as of few days ago do do a 6 pro screen protector

    • @CraigMcAnuff
      @CraigMcAnuff 3 года назад

      @@russell8400 thanks very much!! Yes, someone else also replied on my comment and let me know the same thing. I placed my pre-order yesterday. 😉

    • @SnowBunnyMan
      @SnowBunnyMan 3 года назад +1

      white stone dome DID make one. They thankfully told everyone no to avoid their stock from getting cleaned out by idiot resellers.

    • @CraigMcAnuff
      @CraigMcAnuff 3 года назад +1

      @@SnowBunnyMan Yes. Thanks. Another person replied and let me know. I've already pre-ordered one. :)

  • @markhamilton588
    @markhamilton588 3 года назад +1

    How hard is it to remove if necessary? Do you think it'll damage the phone?

    • @SomethingMobile
      @SomethingMobile  3 года назад

      It’s super easy to remove. I tried it. It’s no problem at all.

    • @markhamilton588
      @markhamilton588 3 года назад

      @@SomethingMobile The glue didn't damage the screen at all?

  • @thechuck141
    @thechuck141 3 года назад +1

    I used this same save protector on my s20 ultra when I tried take it off broke the screen $300 so good luck.

    • @SomethingMobile
      @SomethingMobile  3 года назад +1

      You mean the glue was so strong the force necessary to remove it broke your S20 Ultra Display?

  • @MrHyde14537
    @MrHyde14537 3 года назад

    Are the edges lifting up at all or getting any kind of Halo effect after a few weeks?

    • @SomethingMobile
      @SomethingMobile  3 года назад +1

      The top of the second screen protector has a border bubble after the first 7 days of use.

    • @MrHyde14537
      @MrHyde14537 3 года назад

      @@SomethingMobile I also have a Spigen case on my 6pro and there wasn't enough clearance between the case and protector... It was fine right after install, but squeezing it caused my protector to lift... Ordered these to try next.

  • @mishellealmer1071
    @mishellealmer1071 3 года назад +1

    😂🤣 Tarantula 🕷

    • @SomethingMobile
      @SomethingMobile  3 года назад

      🤣🙂 it's the sad truth. Lol

    • @mishellealmer1071
      @mishellealmer1071 3 года назад

      @@SomethingMobile Your new nickname is TH. I have NEVER noticed. You are hilarious 😆