Hammerhead Mudhead / GT80 Drive Belt Replacement Instructions

Please see an instructional video for replacing a drive belt on the Hammerhead Mudhead buggy. The process will also be very similar for the older Hammerhead GT80model.
Basic tools required:
1 x rubber mallet or similar
Cross head screw driver
8mm socket or spanner
13mm / 14mm socket or spanner
**Very Important**
The drive belt has a flat edge on one side and a slightly tapered (angled) edge on the other side.
When fitting the new drive belt, ensure that the flat edge is fitted so that it faces away from you on the engine side.
It is easy to feel for the flat / tapered edge if you run your fingers gently along the edge of the drive belt before it is fitted.
Should the belt be fitted incorrectly it will wear down VERY quickly!