Installing a drive belt on a go-kart with a 30 Series Torque Converter
HTML-код
- Опубликовано: 2 окт 2024
- How to install a drive belt on a go kart with a 5 to 7 horse power engine. For TrailMaster Mid or Hammerhead 80T and Manco/SportWorks mudhead, vector go-karts.
Find more off road go kart parts at www.gopowerspor...
#gopowersports
#gokartparts
#gokartrepair
~-~~-~~~-~~-~
Please watch: "How To Make Your Coleman CT100U Minibike Faster!"
• How To Make Your Colem...
~-~~-~~~-~~-~
This video was exactly what I needed. Thanks for the time and effort.
You have the same go kart that I have. I bought a new torque coverter 30 series and it comes with a mounting plate. I don't see a mounting plate on my kart. I don't see a mounting plate on yours either. Did I get the wrong one?
i buy one like tha and the rear pulley dont close ,any advise ?
Maybe one of your buttons popped off or you need to replace your spring. Or the driven pulley did not get properly aligned. www.gopowersports.com/30-series-torque-converter-driven-rebuild-kit/
I am having trouble with my wheels spinning when in idle. It even wants to turn the wheels when I pull the starter cord. This is my second torque converter and still can't seem to figure out how to get the belt to spin freely until more RPMs are applied. I do have the flat side of the belt facing the engine and my idle is dialed way down. Here is a video of my issue. Any advice would be great. ruclips.net/video/KlAg14jglkk/видео.html
We put a belt on my Trailmaster 150 and whenever we try to to accelerate, it won't pull and the belt starts melting. What do I do about that?
Change your rear gear ratio. 3 years too late but help someone out...
How do you remove the top clutch cover? When I use my socket set to try the entire thing spins and the bolt doesn't budge.
Zac Walpert I have the same problem.
late reply, but the answer is you put a flat head screwdriver in the gap area of the washer.
I assume the 40 series uses a bronze bushing on driven clutch also? mine came missing that part. not sure if it doesn't need one or I got shorted on Ebay deal
u git shurted on EBAY deal
I bought a new belt for my manco conquest fox. It has the subaru ex13 motor. The belt doesn't have that play in it! Is there anything else I can adjust to give it that play in it?
Y'all helped me I am getting a new belt for mine
I'm doing a Hammerhead Mudhead with no reverse! It has a steel tab on the bottom and I was trying to see if it went inside or outside of the cover! This one is newer and has a different mounting tabs all together. So no help for what I needed, but very helpful info on the converter clutch! Thanks for posting this!
What belt u installing?
Hi l just bought a new dongfang captian go kart my kids used it a few times and the pully broke it look like the alignment is off set just a little when looking at it in line how can you adjust it?
Are the bolts reversed thread or regular righty righty lefty loosey?
Regular right tighty.
Awesome thank you
What size is the belt? I have one just got it a couple of day ago and the belt is getting strip
Hello, What is a screw/bolt size did you use in this set up. Washer size? Length and size? Part number? I have 212cc predator with 30 driver TQR pulley. Thanks.
Dude I love you and when I go to buy any parts for my kart I’m coming to you the tips on the clutch helped me make my kart work again but I know I need a new one and when I do I will do business with you guys thanks a bunch
What size is the belt
mine doesn't have a brass bushing it is a bearing and it's hard getting the belt on.
That first part they took off with the springs I can't even get off my go kart
BestowalPants Gaming yeah I had to pry mine out I’m doing a new engine with the old dingo go cart body and using the old torque converter it’s was a pain in the ass to get off
why does my 212 cc mega moto stop engaging the belt?
By any chance do you know the belt code
Hola tengo un go kart black widow que correa utiliza ? Y hacen envíos a mexico ?
My son bought a fire fox 620 with no engine.he put a stark 170 7hp engine on it.Now it need a torque converter.Witch one does he need?
Erik Masino that may be a better question to ask the manufacturer about and see what they recommend for the model engine and kind of go kart it's on
Why is mine eating the belts?
Rebuilding a yerfdog 3203 8hp predator do all torque converters require jack shaft my cart has no engine or jackshaft
you dont need no fricking jackshaft
You don't need a engine.
what do you do if the bottom spring has no tension and is making the belt slip?
Replace it!
What size belt ?
What's your dimensions?
@@GoPowerSports idk but it's a 6 or 6.5 hp motor.
3171 model
I just bought this go kart and it only goes 15. wondering how to make it faster
Use the idle screw... It needs to be turned up
Along with the gas pedal stopper. Each might be different mine is a 10mm.
I have a manco 606 scorpion and the belt is alot more loose then 1/2 inch.Its got a good inch to inch and a half. The belts brand new and it is the correct 5959 belt. I'm thinking I need to replace the whole thing just because its still the original parts and have worn quite a bit.
Tsunami Shijo any solution currently in the same boat
for a 212cc motor
How do keep the clutch from spinning?
I use a strap wrench
vise grips on the shaft or pull the cord
jack the car guy I use a rubber belt style oil filter wrench on just about anything like that and what the frame take the leverage on the handle. It keeps it from scratching and works great.
I need a new engine for mine
SNAPPERJAKE harbor freight
Do all 30 series clutches use the same part number drive belt?