Found your channel a few days ago. What a gold mine! Such amazing genuine videos and repairs. Great work :) You should collab with Sreten (M539) at some point :)
I had to do this job recently, I didn't know that the actual camera could be removed so easily to disconnect the heating element, I did it all with just the front section removed! It will be much easier next time! I used pu adhesive to re-seal the camera, it seems to have worked. Huge thank you for sharing, you are very skilled. One little thing, apparently Germanium dust is rather toxic, so take care!
this is called "repair", lots of experience $ skills involved great work mate! nowadays dealership is most like only "replacement" , 20 yrs fresh newbies only follow books & replace this/that, even its a default for a $10 part but whole assemble cost $4000 BTW Ovidiu, anywhere can buy a solenoid for G11 airpump? Wabco part code 173 442 051 023 1 / 12VDC 1.4A 15%ED, looking around but been told only sell whole pump not separately
Hello, by the way, great video, thanks for it. I followed your instructions. The lens shines like a mirror, but still, there's hardly anything visible through it. If I remove the front cover with the lens and try it without it, the camera works fine. But as soon as I attach the camera lid, everything is completely foggy. What could be wrong?
Mine is full black screen on my e60, have to do that, becasue is fully scratched from all the years of driving, hoping to solve the problem with this solution
Hello, my NV camera doesn't work, it shows error A788 (camera heating in short), I have a question, is it enough to replace the element that you polished for the repair to make it work?
that's another great video, thank you for the information, i really like the full screen image of the night vision system.... I have an E60 5 series 2010, i retrofitted the night vision system, it's working, but not on full screen (it shows only in the center of the screen, as if i have a small screen instead of the full one). i know that it's most likely the coding and pin assignment (in the back of the CIC), but i cant figure out which pins to use to get the image to show on the full screen .... i also had to change the nigh vision WERT to 21 (NCS Expert coding of the CIC). any help is appreciated.
with cic night vision is not possible on full screen. only CCC. i have the same thing with my 2009 e60 with factory night vision and cic. it cant do full screen unfortunately.
Thanks for your video! I just changed my glass after it broke and now have a failure with the heating (Heizwendel). Does anyone here has an idea what the heating (Heizwendel) in the camera is (night vision BMW G30) and how to displace it? Many thanks, Tom
Well, this really makes me want to retrofit my camera. I just need to order that extra module you mentioned. Regarding protecting the camera, would some form of plexiglass do the job? Like a lens cap in the shroud?
Hey, so my E61 has the night vision equipped, but it's not working. It gives an error "night vision failure" after a few minutes of driving or sometimes right after starting the car. Do you think that would fix this problem too?
My e60 night vision works but the display is just foggy and nothing can be seen. I have had the codes read and have the message ‘Night vision heating element failure.’ Can I replace the heating element? I have bought a new one from ebay but your great video doesn’t make it clear if it’s possible to swap it out. Thanks Sam
Hello, I bought the NV for an E60 2008, and I have an E60 2004 and now the bracket doesn't fit. Do you maybe have a bracket to sell...I think the cameras are the same?
Hello! I polished the night vision lens on my BMW (did not pull the lens out of the device), but the image turned out to be very blurry. Polished to a mirror effect. Please tell me why..?
eu mi-am pus o camera frontala la f10 prinsa in grila de jos si ca sa o protejez i-am lipit o protectie de sticla pentru camere foto de telefon, este exact ca folia de sticla pentru display doar ca e rotunda, cred ca ar fi o idee buna si pentru camera de night vision doar ca trebuie cautata o dimensiune mai mare
Daca era asa de simplu nu mai exista aceasta problema! nu poti pune nimic in fata camerei, adica pot pune dar lentila trebuie sa fie facuta doar din anumte materiale, unu din ele fiind germaniu , camera asta nu e o camera video ca cea de la telefonul tau! e o camera termica care vede radiatiile inflarosu. pentru mai multe detalii Google!
if lens is cracked, even after polish where will be no image right? mine wasnt so bad, so i just polished it without dissasembling, but still no clear image, it shows lighter, but well thats very hot
@@MOvidiu You are right, it was the connector inside camera which was not fully seated and one pin bented. Thanks and good luck for your new life in Florida !
Hi, you might know what could be the problem with my NiVi. I have e65. I noticed recently that my image of NiVi is black. I have a good replacement lense installed some years ago, and it is still very good. So, I think the lense here for me this time is not the problem. I connected INPA and ISTA NVE and NVC do not have any errors. Everything seem fine. However, I tried to test patterns by INPA in NVC Activate section, and I noticed that no any pattern is showed. Previously I had clear images of horizontal, vertical and diagonal patterns when I selected them from INPA. But not this time. Do you think if wiring would be broken the diagnostics would show a problem, could it be that camera is not working and needs to be replaced. I understand that those test ptterns are generated by the NVC, and if there is nothing transmitted ro NVE module, then NVE just send to VM, or Navigation in my case, to show the image, but there is nothing. So I think there are two options. Whether my camera is damaged, and it does not show any image, or may be there is a broken video wire from NVC to NVE. What do you think could be the problem? No diagnostic trouble codes, just black screen... Regards, Ivo aka Cimdahers
Hey please don't stop making videos on this it's too dry out there aha! I have an e60 m5 and I am looking to do this retrofit eventually but willing to purchase as a set the necessary stuff whenever
Salut. Am cumparat recent un f10 cu night vision. Chrome-ul grilelor e putin sarit si as vrea sa cumpar grilele de f10 mai nou, la care difera putin grilele. Intrebarea e daca pot muta suportul cu NV de pe grila mea 2010 pe cealalta grila 2014, ele ca si forma fiind la fel, incap in bara ambele modele la fel, doar grilajul difera putin. Deci intrebarea e daca pot pune sistemul pe o grila neprevazuta cu asa ceva? Merge mutat suportul/camera? Mersi frumos.
@@MOvidiu mașina nu are de fabrica. Vreau sa pun sa am și opțiunea asta.... momentan are 4 opțiuni mai lipsește night vision. Mam interesat în mare.... știu ca trebuie sa fie pereche de pe mașina donatoare... mai știu și de modulu ce lai prezentat... care sa "mintă" nu știu ce... dar mașina are grile active.... trebuie sa renunț la ele... trebuie schimbat multe chestii. Ma întrebam cu codarea... sa fie și funcțională. Mi ciuda ca nu mai am numărul tău de telefon și trebuie sa scriu aici. Îl aveam întrecut... mai ajutat cu ceva la e39... piese de pe e38.... în fine asta ma interesează și ar mai fi perne de aer.... clima din plafon.... volan cu padele... bang olufsen... și cred ca atât. Sper
Unfortunately, I don't think so, this system is very rare! and not too many people know how this system is working, matter of fact even for most of the master techs this subject is Tabu! so there is not a big market for someone to make and sale this.
I got my new lens for 240€ , or you can get one without step for 70€ a lot of optics shops can make it for you, they are coated from both sides, outer side have stronger coating, i did the same polishing work, but vision is not the same , like with new lens.
Nice work! I think you could still protect it with a material that does not filter the IR spectrum. I think they use Ge as a filter in for the IR domain. If you would put any flat material in front of it which doesn't filter the IR band it should still work. If you have tried already and it didn't, then I am wrong :) www.globalopticsuk.com/wp-content/uploads/2019/07/germanium.pdf
Just finished polishing my night vision camera, works perfect now, thank you!
Fantastic!
Found your channel a few days ago. What a gold mine! Such amazing genuine videos and repairs. Great work :) You should collab with Sreten (M539) at some point :)
completely agree with that.
I had to do this job recently, I didn't know that the actual camera could be removed so easily to disconnect the heating element, I did it all with just the front section removed! It will be much easier next time!
I used pu adhesive to re-seal the camera, it seems to have worked.
Huge thank you for sharing, you are very skilled.
One little thing, apparently Germanium dust is rather toxic, so take care!
great job Ovidiu, its really silly work but interesting watching it
this is called "repair", lots of experience $ skills involved great work mate!
nowadays dealership is most like only "replacement" , 20 yrs fresh newbies only follow books & replace this/that, even its a default for a $10 part but whole assemble cost $4000
BTW Ovidiu, anywhere can buy a solenoid for G11 airpump? Wabco part code 173 442 051 023 1 / 12VDC 1.4A 15%ED, looking around but been told only sell whole pump not separately
Can you do a video sometime on the various cleaners , apc mix, solvents etc that you use. Tks
Do a video about upgrade a f10 from night vision 2 to night vision 3 with dynamic spot light
Hello, by the way, great video, thanks for it. I followed your instructions. The lens shines like a mirror, but still, there's hardly anything visible through it. If I remove the front cover with the lens and try it without it, the camera works fine. But as soon as I attach the camera lid, everything is completely foggy. What could be wrong?
Are you sure you need to tighten the screws holding the main lens? Isn't it meant to move a bit?
Mine is full black screen on my e60, have to do that, becasue is fully scratched from all the years of driving, hoping to solve the problem with this solution
You are still a master.
Still we are waiting how can we change nbt evo hdd to ssd hdd?.. thnx😊
Thank you so much for this
You're so welcome!
Hello, my NV camera doesn't work, it shows error A788 (camera heating in short), I have a question, is it enough to replace the element that you polished for the repair to make it work?
as always a pleasure watching a job well done
Please do retrofit on f15/16 with the electronic tow bar that folds in and out
Splendid work and an inspiration. I have much to learn before attempting this on my 2015 F06 thermal camera. Please keep up the content contributions.
Hello! on your f06 it is extremely simple , that lens is made to be replaced , just pus a tab then twist the cover and is out
@@MOvidiu That is awesome news. Thank you for sharing the tech tip and for taking the time to answer back.
What about bmw f10? Can i replace it?@@MOvidiu
@@mariustudor1469 F10 and F06 are the same Lense.
that's another great video, thank you for the information, i really like the full screen image of the night vision system.... I have an E60 5 series 2010, i retrofitted the night vision system, it's working, but not on full screen (it shows only in the center of the screen, as if i have a small screen instead of the full one). i know that it's most likely the coding and pin assignment (in the back of the CIC), but i cant figure out which pins to use to get the image to show on the full screen .... i also had to change the nigh vision WERT to 21 (NCS Expert coding of the CIC). any help is appreciated.
with cic night vision is not possible on full screen. only CCC. i have the same thing with my 2009 e60 with factory night vision and cic. it cant do full screen unfortunately.
Nice man i am going to try this out !!
Hi my Frend,
Can you organize a new glass for nivi camera for e60?
What will it cost?
Best regards
You mean to make a new lens ? if you need one search on eBay you will find manufacturers and they will do one for you !
Thanks for your video!
I just changed my glass after it broke and now have a failure with the heating (Heizwendel).
Does anyone here has an idea what the heating (Heizwendel) in the camera is (night vision BMW G30) and how to displace it?
Many thanks, Tom
Well, this really makes me want to retrofit my camera. I just need to order that extra module you mentioned. Regarding protecting the camera, would some form of plexiglass do the job? Like a lens cap in the shroud?
I love your content and your incredible attention to detail! Is it possible for you to do a video on FRM reset on F chassis cars?
Hey, so my E61 has the night vision equipped, but it's not working.
It gives an error "night vision failure" after a few minutes of driving or sometimes right after starting the car.
Do you think that would fix this problem too?
Hello, short answer No, you need to scan the car to see what the problem is.
thanks!! you are thebest
My e60 night vision works but the display is just foggy and nothing can be seen.
I have had the codes read and have the message
‘Night vision heating element failure.’
Can I replace the heating element?
I have bought a new one from ebay but your great video doesn’t make it clear if it’s possible to swap it out.
Thanks
Sam
Salut,se poate repara partea cu camera/night vision 2,mai exact 2 pini ce întra în mufă,pinii auriți ?Mi i-au rupt când s-a dat bara jos.
Salut! daca ai o alta camera de piese sau mufa probabil ca se poate repara!
Hello, I bought the NV for an E60 2008, and I have an E60 2004 and now the bracket doesn't fit. Do you maybe have a bracket to sell...I think the cameras are the same?
Great video thanks, I’ve done it the same way you did but the picture isn’t better than before. Do you have any idea what the problem is?
Night vison 2 and 3 have a screw on lens which makes it so much easier
Is there a protective cover for this? It should help with damage.
*perfect*
Salut. la un e61 2004 sepoate schimba radiatorul ala mic fără să demontezi tot bordul Multumesc
Hi, you could protect the lens with a plastic sheet glued in front of it!
Hello! unfortunately you can't do that, you can't put absolutely nothing in front of the camera!
Is this night vision 1 or 2?
Hi I'm facing a problem that I'm night vision is stuck in activating night vision
Did you do a diagnosis?
I try to polish lens without remove camera from car... I think my lens is not accurate polsih ..
Hello! I polished the night vision lens on my BMW (did not pull the lens out of the device), but the image turned out to be very blurry. Polished to a mirror effect. Please tell me why..?
Ben de aynısını yaptım ve şu an aynı sorun bende de var ne yapacağız sen bir şey yapabildin mi eğer yaptıysan bana da yardım eder misin lütfen
@nickran2980 did you found solution for it? I have the same problem now :D
Bravo man, esti tare !!!
eu mi-am pus o camera frontala la f10 prinsa in grila de jos si ca sa o protejez i-am lipit o protectie de sticla pentru camere foto de telefon, este exact ca folia de sticla pentru display doar ca e rotunda, cred ca ar fi o idee buna si pentru camera de night vision doar ca trebuie cautata o dimensiune mai mare
Daca era asa de simplu nu mai exista aceasta problema! nu poti pune nimic in fata camerei, adica pot pune dar lentila trebuie sa fie facuta doar din anumte materiale, unu din ele fiind germaniu , camera asta nu e o camera video ca cea de la telefonul tau! e o camera termica care vede radiatiile inflarosu. pentru mai multe detalii Google!
Can you do a video like this for the nivi 3 camera lens?
if lens is cracked, even after polish where will be no image right? mine wasnt so bad, so i just polished it without dissasembling, but still no clear image, it shows lighter, but well thats very hot
If the lens is cracked the water can enter inside of the camera, and water + electronics = everything else but not Love!
Hello, I did this job and now I have error codes "camera desativated" codes A74A A74E S0156 S0431, can you help? Thanks
Redo your steps ! Probably you did something wrong!
@@MOvidiu You are right, it was the connector inside camera which was not fully seated and one pin bented. Thanks and good luck for your new life in Florida !
keep up bro
Does the inner lens has manual focus calibration ?
Yes, but I advise you not to mes with it !
@@MOvidiutoo late I kind of did to clean all the moisture out of the camera. So now what’s the proper distance I should be focusing it from ?
@@MOvidiu hey buddy any change you can tell me what will be the right distance to calibrate the lens ?
Hi, you might know what could be the problem with my NiVi. I have e65.
I noticed recently that my image of NiVi is black. I have a good replacement lense installed some years ago, and it is still very good. So, I think the lense here for me this time is not the problem.
I connected INPA and ISTA NVE and NVC do not have any errors. Everything seem fine. However, I tried to test patterns by INPA in NVC Activate section, and I noticed that no any pattern is showed. Previously I had clear images of horizontal, vertical and diagonal patterns when I selected them from INPA. But not this time.
Do you think if wiring would be broken the diagnostics would show a problem, could it be that camera is not working and needs to be replaced. I understand that those test ptterns are generated by the NVC, and if there is nothing transmitted ro NVE module, then NVE just send to VM, or Navigation in my case, to show the image, but there is nothing. So I think there are two options. Whether my camera is damaged, and it does not show any image, or may be there is a broken video wire from NVC to NVE.
What do you think could be the problem? No diagnostic trouble codes, just black screen...
Regards,
Ivo aka Cimdahers
PMed on Messenger
Hey please don't stop making videos on this it's too dry out there aha! I have an e60 m5 and I am looking to do this retrofit eventually but willing to purchase as a set the necessary stuff whenever
stiu ca nu are legatura dar tu ce ai alege din f10 si e60 ?
Salut. Am cumparat recent un f10 cu night vision. Chrome-ul grilelor e putin sarit si as vrea sa cumpar grilele de f10 mai nou, la care difera putin grilele. Intrebarea e daca pot muta suportul cu NV de pe grila mea 2010 pe cealalta grila 2014, ele ca si forma fiind la fel, incap in bara ambele modele la fel, doar grilajul difera putin. Deci intrebarea e daca pot pune sistemul pe o grila neprevazuta cu asa ceva? Merge mutat suportul/camera? Mersi frumos.
Realoem.com acolo poti compara codurile si vezi daca e diferenta sau nu , la suporti si asa mai departe .
@@MOvidiu bine. Mersi!
Salut.... se poate face un upgrade la night vision la un f01?
Salut! Upgrade? de la sistemul de fabrica la unul mai superior? sau?
@@MOvidiu mașina nu are de fabrica. Vreau sa pun sa am și opțiunea asta.... momentan are 4 opțiuni mai lipsește night vision. Mam interesat în mare.... știu ca trebuie sa fie pereche de pe mașina donatoare... mai știu și de modulu ce lai prezentat... care sa "mintă" nu știu ce... dar mașina are grile active.... trebuie sa renunț la ele... trebuie schimbat multe chestii. Ma întrebam cu codarea... sa fie și funcțională. Mi ciuda ca nu mai am numărul tău de telefon și trebuie sa scriu aici. Îl aveam întrecut... mai ajutat cu ceva la e39... piese de pe e38.... în fine asta ma interesează și ar mai fi perne de aer.... clima din plafon.... volan cu padele... bang olufsen... și cred ca atât. Sper
What ist your polish material ? Weil mein kamera ist blöth
3M car polish
👍👍👍
Bună seara cum pot lua legătura cu dv?
Salut ! Cum te pot contacta ? Aş dori o curăţare si la camera mea de la e60 !
😁😁😁😁👍multa bafta
I wonder if Alibaba sells replacements for cheap
Unfortunately, I don't think so, this system is very rare! and not too many people know how this system is working, matter of fact even for most of the master techs this subject is Tabu! so there is not a big market for someone to make and sale this.
I got my new lens for 240€ , or you can get one without step for 70€ a lot of optics shops can make it for you, they are coated from both sides, outer side have stronger coating, i did the same polishing work, but vision is not the same , like with new lens.
@@andriusskaudzius2424 where you bought this
@@wacabby i can email you, here everytime i post they delete the link and shop name.
@@andriusskaudzius2424 show your email and I will reach out if you dont mind. it's for V1 night vision ?
한국어 번역 추가 바랍니자
👨🏻🔧🚙👍
Very good but plz don’t say something like that anymore😅…
Say what ?!
😒 ᵖʳᵒᵐᵒˢᵐ
Блять почему нет видио на русском
Nice work!
I think you could still protect it with a material that does not filter the IR spectrum.
I think they use Ge as a filter in for the IR domain. If you would put any flat material in front of it which doesn't filter the IR band it should still work.
If you have tried already and it didn't, then I am wrong :)
www.globalopticsuk.com/wp-content/uploads/2019/07/germanium.pdf