Polestar 2 CUP HOLDER FIX!
HTML-код
- Опубликовано: 5 май 2021
- My New Norwegian Channel (Kris Rifa På Norsk):
/ @jegerkris
Why I love the Polestar 2:
• Why I LOVE the Polesta...
Link to Cup holder:
cults3d.com/en/3d-model/vario...
Link to Modular shelves and bin:
cults3d.com/en/3d-model/vario...
Get the official 0% SOC merch!
shop.spreadshirt.net/krisrifa
Do you want to support the channel? Please check out my Patreon:
www.patreon.com/krisrifa?fan
Social media @ Krisrifa
Krisrifa @ Instagram
Riisfalch @ Snapchat
MY GEAR
Camera: Sony A6600 amzn.to/3jU6mzG
Lens: E 18-135mm F3.5-5.6 OSS amzn.to/3jKU10B
Microphone: Røde Wireless Go amzn.to/3daERQN
Editing software: Adobe Premier Pro CC 2020 amzn.to/3rOyve8
Computer: MacBook Pro 13 M1 8GB amzn.to/2ZhDCHz
DISCLAIMER: Links above may be affiliate links. If you purchase a product or service with the links that I provide (not limited to the products in the links), I may receive a small commission. There is no additional charge for you, but you will however be supporting my channel. And that is much appreciated. Авто/Мото
Give this comment a like and comment “I would buy one” if you would actually buy a finished cup holder 😊 This way we can gauge the actual demand!
I would buy one!
Now Kris you have to buy a polestar!
I would actually buy one. Thanks Kris
I would buy one!
I would buy one
I’ve seen these posted on a forum previously, the designer has done a great job, my solution to sun glass storage was to buy the Volvo sun glass holder and replace the handle over the driver door, works a treat
www.ebay.co.uk/itm/313402632272
That was the product I purchased
Hi! I would definitely buy it. Very nice improvement of the interior! 👌🏻👏🏼
Perfect Solution Kris! I would buy all of them👍
Really great vid man ! Keep it up !
Mucho Gracias Mi Amigo!
great idea would buy the shelves and pair of cup holders when and if available
Sign me up! However, driving by myself I dont mind having the cupholder where it is. I often rest my arm on the left side of the center console, which is not too bad when you get used to it. I want to buy the cupholder for my passenger.
thank you kris, another great video !
i would buy one (shelf and cup holder, but do you ship in canada ?
is the arm-rest not able to go up like on most cars, just back and forward?
I’m in the UK have a black interior please let me know if I can order a cup holder and the 2 split console space savers please?
I would certainly purchase all 3 items, thank you.
What are they made of? I’m here in south Florida and the sun gets things really hot in summer. Any risk of melting? I’m definitely interested though.
You forgot the two spaces on the sides of the middle area. There is a lot of space for sunglasses and facemasks. :-)
The cup holder is not too bad.
Wow that solution was great! :)
Kris, I own a 2022 PS2, with the same colors in/out, how do I purchase the cup holder set? Unfortunately, I do not own a 3D printer. Thx for the video.
I’d definitely buy both of these!
I definitely would buy a cup holder and a shelf for my polestar 2 here in the US; thanks!!!
The cup holder is great. Well worth getting
Is there a place I can buy the cup holders and not the 3D print? I don’t have a 3D printer. Thank you!
Wow-excellent video, Kris, and I’m so glad that someone out there came up with this idea! That sure solves a lot of problems. We can only hope that when it’s time to update the Polestar 2 in a few years (assuming they do a mid-cycle refresh), the designers will revisit their questionable center-console layout and come up with something better. In the meantime, ingenuity wins! 😀
Love the doubleshelf and cupholder.How can I buy them?
Where can I buy the shelf and the cup holder thanks!
Not going to get a 3D printer to do this. Anyplace it can be purchased?
Hi, following all your videos and insights to the Polestar (ours arriving in June 2022), I'd definitely buy a cup holder! Best, M.
I would buy the cup holder for sure.. how do I get one?
If available I would like to buy shelfs and cup holder.
So Kris, this post has been up for a while now. Is there a place yet to buy the cup-holder? I would buy one instantly.
I would absolutely buy one. Are they available yet?
That is cool , I just reviewed the polestar - - I thought the cup situation was odd!
Now that we have solved this huge problem, let us tackle world hunger. Btw, i'm getting my PS2 in 3 weeks.
Haha 🤣🤣
Is this available? The link provided only shows how to 3D print. Thank you
Dette hadde jeg kjøpt!
I would definitely buy one!
I´d buy that cupholder, for sure!
Great video 👍 I would buy one 🙂
I would buy one. the set that is shelves and especially the cup/waterbottle holder.
I cannot find the link to buy the 3D printer files? Anybody have it?
Can I buy a finish cupholder yet?
If (when) I get a Polestar 2 I will be getting these accesories.............well done to the guy who came up with these.
Are these products available? I would purchase all of these
Awesome I’m into them 👍
I would buy all of these, also there is a pocket on the side of the console, I’d love to have a cover to hide the contents. Living in a city any way to not display contents in the car is a plus for theft deterrence. I even a cover option for the center console chargers would be plus.
Possible yo buy the shelves somewhere yet?
Is there any rumour out of Volvo/Polestar that they will redesign the centre console? Would hate to get one and then they radically change up and address the issue.
Thanks. I'd go for the cup holder for my P2...
Great video 😃👍. I would buy one😃.
I would definitely buy one ... the whole pack actually :)
Can I purchase these items?
Hi Kris,
What's about having a bottle there with the passenger airbag flying off in worst case??? Is it not in the way?
In a crash everything can happen, but I'd wager a guess the airbag sits higher, and that it would just push this cup holder down into the foot well.
This reminds me of the German cars when they refused to install proper or ant cup holders. I really don’t like the battery pack going up the center tunnel, because it completely takes away the open feeling that you get in an EV. I think that it’s platform sharing that would enable a petrol engine, transmission and driveshaft to fit down that huge tunnel. I haven’t seen a design like this since the Chevrolet Volt / Opel Astra (I think).
I’m interested in the final product 🖐
I’d like to purchase a set of storage boxes and two cup holders thanks
I am interested in these products
Kjøper gjerne dette
Would certainly buy the cup holder (if reasonable priced)
I would like all the storage options please 😀
How about the Airbag ?
In the market now and looking at this. Storage is an issue but fwiw I think it’s far and away one of the best looking consoles/interiors in the EV space. I’d prefer more physical buttons too but again, I think they pull off the aesthetic better than most. Love the cockpit feel, love the materials, screen placement is reasonable. Gets an A from me on aesthetics/feel.
You don't like the quite large compartments on each side of the console? Outside, close to your right lower leg, and also on the passenger side...? Sunglasses (and more) fit very nicely there. Cup holder was nice, though.
I would want one too!
What exactly do you need to store in the car?!? The registration and manual..what else do you want ??
Sunglasses, bags, wallets, clean whiles, dry wipes, a bottle of two of water etc. somebody obviously hasn’t been on a road trip with kids 😅
Wow, makes the Polestar 50 % better instantly. 😁
Exactly!
Please. If a cup holder makes any car 50% better, might consider not driving. Really.
Yes please partner i want those finished pieces.
I would buy one!!
Would like to buy all three items
I would certainly buy a set
I would like to buy one!
I want to buy one!
OMG, I should choose this interior package,it is so good to make PS2 from a toy to a real car!
The reason for the poor storage and high console is almost certainly that all of that space is used for battery/technical space. Looking at the XC40, which I'm guessing has the same limitations, it looks like the problem has been solved in a better way there, by moving the selector control to the side and placing the cup holders alongside it, instead of behind and into the armrest. I'd almost be tempted to replace the Polestar console with one from Volvo, except that the volume knob/hazard and demister controls would also need to be moved/re-housed, which is not practical for DIY. It would be great if Polestar could completely redesign the solution, bringing it closer to the Volvo approach.
Bring it on!
Surely Ikea has a practical solution for the lack of central storage?
I would like a smartphone holder next to the tablet since Waze is still not available.
Jeg vil veldig gjerne kjøpe koppholder 🙌
I would buy one
Siberia is watching you :) 🤳🙏
I would like to buy!
Great solutions, but it would have been good if the cup holder was a few centimeters higher, considering the bottles.
Super , like to get it from your shop Pls :-)))
Regards
Erik ,Denmark
I would buy one.
I want the Cupholder.
I actually don’t have a problem with the original cup holder and I also like the Center console it kind of feels safe. But that 3d printer stuff is pretty genius all the same .
same here
I don't have my Polestar yet, but when I test drove I didn't see the storage as an issue. I don't store much in the car though - phone, keys, wallet, sunglasses and some usb cables. Plenty of room for this with the storage compartments. Agree 100% on the cupholder though
I'm in Canada where you can't even buy a Polestar, but I do think it's really cool and I hope that it sells.
There are polestar spaces in Toronto, Montreal and Vancouver with more to come.
@@seanderasp8653 I stand corrected, thanks!
Pass på pianolakken, Kris :D
Sign me up.
Jeg hadde kjøpt både koppholderen og hyllene.
Ser ut som de du har er printet i den lys grå fargen. Håper man kan lage en mørkere for å passe inn i min bil med det mørke interiøret.
I like to order these items
Anyway I can buy the cup holder, shelf from anybody... I don't have a 3d printer.... Thanks
Not too much of an issue if you have a no food and drink policy for your car. I like the little shelves though.
I would by one!!
Absolutely, the Polestar 2 center consol is just beyond stupid!
I don't have a 3D printer. Please sell the cupholder on your site.
If you sell them I will buy them!
“I would buy one” and also the storage tray. Tell me where to pay.
Kilo- metre as in kilo-watt!
What is this cup holder fixation all about?
Everyone has missed the point.
This is a VERY cool car and so naturally the cupholders are designed for Espresso Ristretto, obsv.......
For me, the lack of storage is a big +. No rubbish....
When I was considering buying a Polestar 2 in December, I couldn't believe how UTTERLY STUPID the cup holders were. There should also be 2 wireless phone chargers, side by side, and put the tiny USB ports somewhere else. It seems like the cup holders were added as an afterthought, instead of doing a redesign. The person who designed that should go back to school and the person who approved it...well, I don't know. I bought a 2021 Tesla M3 LR. Problem solved :-). No, it wasn't the only reason, obviously. I love the Polestar 2, but it has a lot of refining to do yet. Heat pump would be a big one.
Please sell this somewhere :+1
The sides of that centre console seem to cut off the bottom of the screen. Most odd decision by Volvo, sorry Polestar.
Geez how much stuff do you need to carry inside the car?!?! I only have masks, a microfiber towel, tissues, and USB cables. It doesn't have door bins?? It doesn't have a overhead sunglass storage?? What about the storage on the sides of the center?? Wow those locations u used for that Pepsi can is just DUMB!! LOL!!!!
Don't drink and drive!
That solves everything 💡
I don't get what people would want with a cupholder in a car thats so nice it deserves a no food and drink policy.