Ray, thank you very much! I also used the wrong version of AmdVBflash and this worked perfectly! I especially liked the suggestion of using tweezers. This video was straight and to the point without any "fluff". Great job.
Thank you so much for the effort to publish a video. I followed all the instructions unfortunate I wasn't able to flash de BIOS correctly. I made my own research and finally I found the way and here is what I did. My main problem: My GPU wasn't recocnited by the Operating Sistem, I have integrated graphics so I was able to start windows without problem but the GPU don't appears in Devices Manager (just the lighs and fans was turn on ,The GPU was almost dead). Solution: I follow almost all the steps of the video with some considerations. The Only way to get some life signals on the OS was shorting the bios pins 1-8 so, If you made the short in bios properly (Shorting the bios pins with the CPU off, then turn on and just mantain the shorting until you see the windows user.) now you went able to run the amdvbflash -i command and see the adapter 0 like the video. This is the most important thing, you need see your adapter (GPU) to continue with the next steps. The next command on cmd should be: amdvbflash -unlockrom 0 (I don't sure if this command is neccesary but I used) Now Is the flash: amdvbflash -p -f 0 name.rom In this line I use -f to force the bios flash, you need to be sure that you selecct the correct adapter in case that you have more than 1 GPU, also you need the rigth stock bios for your GPU. Here when you ejecute the command a lot of people get de error 0fl01, I also got this error like 20 times and here is what worked for me. The problem is while you are flashing the gpu the temperature goes up and the gpu becomes unrecognizable to the system and it is impossible to flash properly. The correct way to do the flashing is with the gpu assembled correctly with the heatsink and fans, but it is almost impossible because the short has to be done with the gpu disassembled and my solution was to solder 2 cables, 1 cable in the PIN1 and another in the PIN8 to be able to assemble the GPU correctly to avoid temperature problems and then make the short from the outside with the soldered cables. In this way I was able to flash my GPU at the first try, I am very tired to continue writing more details, but if you have doubts, leave a comment
Hi, when you short pin 1-8, do you post using the integrated or the gpu, since your gpu isn't recognized by windows. What does shorting pin 1-8 does actually
God bless you, you saved my day! In my case, I did not have to remove the backplate (actually, I didn't find those 4 screws you mentioned, it's the same Gigabyte card), but the BIOS chip is close to card's edge so I was able to short those pins with the tweezers without dismantling the card. Greetings from Romania!
This is a big help. My 5600xt still no post on windows, fortunately it see on hiveos. I do the procedure and able to flash the bios using hiveos vbios and everything back to normal. Thanks to this man!
Broooo life saver !!! I bricked my rx 580 with wrong vbios and the pc wont post with the card in, I have already ordered a ch341a programmer to reflash the bios, but i saw your video and i tried it, i shorted the 1-8 pin on my rx 580 and it posted and detect the card as an rx 590 and i run amdvbflash and reflashed it with original bios and now boom it is back in bissness , i guess i wasted that 5 dollar on the ch341a , but im happy that it is working again before my order arrived . thank you soo much I can confirm this works on MSI RX 580 OC ARMOR 8GB
+ this fixed my older problem which made me to brick the card My rx 580 was crashing at stock speed 1366@2000 i had to downclock it to 1200mhz and undervolt it to 900mv to make it stable Now after i fixed it with your method i tried to run furmark at stock speeds and wow it is stable at 1366mhz no crashing no more Im really happy and thankful to you ❤
You are the absolute boss! I was sick from bricking my Gigabyte 5700XT with 3.04 and with your instructions I resurrected it and its back mining. It was a little unnerving running the card with no heatsink so I put a little one on just in case but it never got that hot. Thank you so much!
@@curatedcomputing Just to confirm, were you able to extract the original BIOS using version 2.93...then edit the straps...then flash? OR did you have to use a BIOS file found online? In my case... I used 3.04 and someone in a mining discord was kind enough to give me the OC Bios which worked. Thank you for your feedback
@@rajnificent I backed up using 3.04 and could flash back with 2.93. I wanted a modded BIOS though so I used an older one I found online and modified the timings and added an MPT file to it.
Quick tip: If you have a dual BIOS GPU (like the Aorus 5700 XT), and you mess up one BIOS and want to recover it without disassembling the GPU, you can start with the working BIOS. Just when it displays video, quickly switch to the faulty BIOS. After that, you just need to follow the instructions in the video to flash the original ROM.
Great video. It's worth noting that for $8 you can buy a ch341a programmer. Then you can flash without running the card on a riser. Cheap insurance to have on hand before attempting a refash.
Holly shie this is working , but I got no display output but I know my system get into post. I remove the gpu inorder to get display and fcking memorize the step so I can flash the hd7790 bios . and you know what ? ITS FOKING WORKING. THANK YOU SO MUCH MANN I LOVE YOU
Hey download the stock bios from gigabyte official website. You will get an exe file in that folder. Just execute it. Press the flash button and u are done.
Will this method work for me too? I saved the stock bios, modded it, flash back the modded one into my 5700xt gigabyte gaming OC 8G. It flashed successfully but then when I restarted my PC, it didn’t boot. Now when i put this card into my rig, like on a PCIe slot or riser, my computer/rig does not boot. Doesn’t matter if i use dedicated graphics, or put this card with 5 other cards, this card alone does not let my rig boot.
i had this exact same issue....you have to use the method shown in the video to bypass the bios from loading on startup, and then use AMDVBFLASH 2.93 to flash the stock bios back on to the card....the issue is with using AMDVBFLASH 3.04....you MUST use 2.93 to flash the Gigabyte 5700xt specifically.
I bought a TUF 3 RX 5600 XT used, it doesn't post and my PC doesn't recognize it, when I check on display adapters it shows it as a Microsfot Basic Display Adapter, any ideas :c
I had the same problem on a MC 5600 XT video board and installed a notice of an XFX video board of the same model and I needed to know if to make the short circuit I needed to do it with the board on with the board off
@@Lynchz en alguna de las preguntas están los pasos en español.. pero la tarjeta debe estar coectada con la compu apagada. haces el corto y enciendes la pc mantenienndo el corto hasta que aparezcan los logos de inicio de win
I have just bricked my Gigabyte RX 5700 XT Gaming OC 8GB version by trying to update the bios everything went fine and after finishing updating the bios retstarted and JUST a "white "-" on the monitor.. nothing else. I cant either bios or windows, totally stucked. Please help me. I tried resetting the bios by touching the mentioned 2 diagonal pins, nothing happens.
I also have a bricked 5700 Sapphire Pulse. It is not detected on Windows or any AMD flashing tools. I tried to short the Bios with the pins as shown on the video but nothing happens when I boot. The fans are spinning but can’t get the gpu to be detected. I’ll just take the L and move on, rip.
@@charlesd7301 This only works if you bricked during a BIOS flash, you might have other hardware errors. If your PC won't post with the GPU installed and is fine when removed this method should work.
Hey i was wondering if the latest version of amd vbflash still has issue with gigabyte card? This video is 4 Years so i thought maybe it's fixed in latest vbflash version. I posted on pcmr someone replied they flashed successfully with the latest vbflash
hey I have 5 6700xt but different brands. I mistakenly loaded a XFX speedster 6700xt bios setting onto a Red devil 6700xt card. The card works fine but every 2 days my screen just freezes and I was thinking could this be the reason?
Hi thanks for the help! I did the same thing and my card didnt post! I changed the video to onboard, and my 5700 is recognized on amdvbflash.. the steps from there are the same? Thanks again!
I would like to know why is it does everyone everywhere seem to avoid talking about the amd 5500 xt card? does this fix work for the 5500 xt card??? I need to know please? No information anywhere.
Question, so I used this method and got the stock bios back on and the card is working again. Can I just use 2.93 to flash the edited bios onto this card or do I need an unlocked bios for this specific card?
mine wasnt posting but then it did it again, yet amdvbflash does not find the adapter, and i did use amdvbflash 2.93plus not sure what happened or what to do next i am right before going the shorting method as well
@@brianhernandez9826 hi, yes, shortening with tweezers worked for me, short the pins, boot up the pc, as soon as windoes starts you can unshorten the gpu again, reflash with original bios, done. but it might take several runs, i had issues with the reflashing process. after reflash etc, DDU the system and reinstall the drivers. worst case reinstall windows/the full system
@@brianhernandez9826 try to post and use amdvbflash 2.93+ but dont unshorten the pin before -amdvbflash -i you need to give all of this several tries, its not always working
I have three MSI NVIDIA GTX Supers. Two out of three took the new BIOS that increases the hashrate from 31.81 to 34.6MH/s (Hynix memory only!) but the third one bricked. Can't post with the card. Wondering if this will work? Can you comment?
hola, tengo una aorus gtx 1070 que no se cual es el chip del bios tiene 2 winbond 25Q40 en los 2 lados de la placa en un lado esta uno y al dar vuelta la placa hay otro igual cual de los dos seria??? gracias
Thanks for the video. I have a question....I'm having the same problem with ASUS RX 5600 XT GAMING MX. Do you know where can I find the original BIOS to flash the BIOS correctly?
EASIER no HARDWARE fix that worked for me: plugging the brikked bios gpu AND one more gpu (i had a brikked XFX RX 5600XT Thicc III Ultra, and used a spare RX 570), boot into windows using the good gpu as output (you can probably pull this off with iGPU/Integrated Graphics too). Once in windows, open device manager, navigate under Display Adapters, right click the dead bios gpu and 'Disable' it. Once you do that, just open AMDVbFlash (latest version available on techpowerup), and flash your bios backup. Reboot, open device manager and re-enable the dead gpu. This fixed my 5600XT, i hope to have helped someone out there
Do you mean the two on the left (up and down) or the one with the arrow down on the left and the one on the top on the right? I've tried to do the latter and it didn't work. Tried the first and it didn't work either..
So that I understand it correctly you start the PC via an integrated graphics unit and not via the graphics card? And u hit the 2 Pins so long u see on the monitor that the PC is starting?
Good to know if there is an option if i screw things up, i have a couple of xfx 5700 xt triple dissipation (v2.0) which is moded, i was trying to find the original bios for it, but there was nothing on the internet, can u help me find one?
Wow, those pins are very small on the chip.. I think will buy an USB SPI programmer to use :) Thanks for the video, it was very informative. The bios signature, is it only used when flashing, or is the GPU validating the signature when booting? If I program a modified bios with no valid signature using SPI programmer, will it boot?
Heyy i need help! I am trying to reflash gaming x rx 570 to it's original bios! But it breaks my gpu whenever i flash the ones on techpowerup. Could this be atiwinflash version issue. If yes whjch version can i use for rx 570
ok i did this exact thing, bricked my 5600 xt, ive tried this trick with the tweezers and it wonr work, i have a xfx thicc with the dual bios, it had two bios chips, the switch was in the OC position. since theres two bios chips which is which? it will boot in the silent mode
Hello, please their is any software solution about memory temperature for Asus Rox strix Rx 5700 no Xt, my memory temperature while mining is about 94 degrés, thank you
Hello, I did not understand how to make the bios bridge? Could you specify that part ..... I would appreciate it. I have a garmin x rx 5600 xt ..... it does not work anymore, nor does the mother start me, by bridging which specific pins? should it start anyway?
hey can you do one for the rx 580? I flashed my bios and I can't open my drivers or install them without my screen turning solid blue and flashing. I also cant open ati flash without getting a solid blue screen and my pc crashing and restarting please help. I need the stock bios.
hello, please I'm stuck who can help me please, I flash my Asus Rog strix Rx 5700 no Xt, with amdvbflash I got an error message that the -f is not supported, then the flash continued and asked to reboot, after reboot no image, then I restarted in Q mode I tried the same with the stock bios the flash worked but still no image on the mode P, I tried on the machine of a friend who has a built-in card I flashed the card again but with another asus Rx 5700 bios, there the fans stop and when I try to flash with atiflash I have an error message telling me error program rom, is my card stuck? when I do on AMD flash -i I have the navi10 information ..... etc, please who can help me I am blocked I bought this card not two months ago, thank you in advance
hello sir, i mod bios MSI GAMING X 5600XT, mod bios success no error, but after restart the computer no signal to display and HDD signal no flashing, my display use integrated GPU from processor, can you help me sir...
The only mistake that you did was to use fcuking windows. I bricked my cards several times while doing experiments with the vbios, and recovered without taking the gpu apart. Further more, that was done remotely on a big a55 12 gpu rig running hiveos. Just toggled the maintenance without loading drivers, rebooted and reflashed with a working vbios. One more...if the gpu was bent over by the window, and won't post, flash hive into a usb (you'll need an account if you don't have one), boot it without the card, set everything up, upload the good vbios, toggle maintenance without loading drivers, turn the pc off, connect the gpu through a riser or the mobo and don't hook up the riser power or the gpu if on the mobos pcie. Turn on the pc, and hook up the power to the riser or the gpu while booting up, then make the gpu great again.
Would you be able to make a video on where the chip is on the 5600xt? I have the same exact one but it solved the issue of no post, whereas now there is still a black screen after the cpu ram vga boot leds post. I believe I’m shorting the wrong one now.
All I did was when I screwed mine up was reflashed the saved back up bios in hive os and it started working again. I didn't need to short out the bios.
I just wanted to make sure what your saying is that fixed the gpu that was already bricked or you were testing thr settings of the rom if it was going to brick?
@@lugia2204 no i am saying if you edit the bios of your gpu and after flashing it your gpu did not respond, in that case you can reflash your stock bios again through dos commands to make your gpu working.
Ray, thank you very much! I also used the wrong version of AmdVBflash and this worked perfectly! I especially liked the suggestion of using tweezers. This video was straight and to the point without any "fluff". Great job.
Glad I could help!
You are a saint, totally saved my card today 02 26 2021. Thanx thanx thanx. Asus dual evo 5600xt
Glad this worked for you :)
Thank you so much for the effort to publish a video. I followed all the instructions unfortunate I wasn't able to flash de BIOS correctly.
I made my own research and finally I found the way and here is what I did.
My main problem: My GPU wasn't recocnited by the Operating Sistem, I have integrated graphics so I was able to start windows without problem but the GPU don't appears in Devices Manager (just the lighs and fans was turn on ,The GPU was almost dead).
Solution: I follow almost all the steps of the video with some considerations.
The Only way to get some life signals on the OS was shorting the bios pins 1-8 so, If you made the short in bios properly (Shorting the bios pins with the CPU off, then turn on and just mantain the shorting until you see the windows user.) now you went able to run the amdvbflash -i command and see the adapter 0 like the video.
This is the most important thing, you need see your adapter (GPU) to continue with the next steps.
The next command on cmd should be: amdvbflash -unlockrom 0
(I don't sure if this command is neccesary but I used)
Now Is the flash: amdvbflash -p -f 0 name.rom
In this line I use -f to force the bios flash, you need to be sure that you selecct the correct adapter in case that you have more than 1 GPU, also you need the rigth stock bios for your GPU.
Here when you ejecute the command a lot of people get de error 0fl01, I also got this error like 20 times and here is what worked for me. The problem is while you are flashing the gpu the temperature goes up and the gpu becomes unrecognizable to the system and it is impossible to flash properly. The correct way to do the flashing is with the gpu assembled correctly with the heatsink and fans, but it is almost impossible because the short has to be done with the gpu disassembled and my solution was to solder 2 cables, 1 cable in the PIN1 and another in the PIN8 to be able to assemble the GPU correctly to avoid temperature problems and then make the short from the outside with the soldered cables.
In this way I was able to flash my GPU at the first try, I am very tired to continue writing more details, but if you have doubts, leave a comment
Thank you so much! I followed your exact steps on my XFX 5700 (that I bricked) and was running into errors. Fixed with 2.93!
Hi, when you short pin 1-8, do you post using the integrated or the gpu, since your gpu isn't recognized by windows. What does shorting pin 1-8 does actually
thank you so much , you helped my with the gpu that keep become undetected because of gpu temps , now i fixed somehow with unlocked rom .
God bless you, you saved my day!
In my case, I did not have to remove the backplate (actually, I didn't find those 4 screws you mentioned, it's the same Gigabyte card), but the BIOS chip is close to card's edge so I was able to short those pins with the tweezers without dismantling the card. Greetings from Romania!
Glad you found an easy fix!
Thanks for this information!! In the gigabyte the 1 8 pins are in the same position than he shows in the video?
@@peladoko Yes
dude you effin' rock....this totally saved my card, i was able to flash back to stock bios and get it going again. THANK YOU!!!
Saved mine too
Thank you so much, I just came back to watch all of the ads to support you 😁 you just saved my card
This is a big help. My 5600xt still no post on windows, fortunately it see on hiveos. I do the procedure and able to flash the bios using hiveos vbios and everything back to normal. Thanks to this man!
Broooo life saver !!!
I bricked my rx 580 with wrong vbios and the pc wont post with the card in,
I have already ordered a ch341a programmer to reflash the bios, but i saw your video and i tried it, i shorted the 1-8 pin on my rx 580 and it posted and detect the card as an rx 590 and i run amdvbflash and reflashed it with original bios and now boom it is back in bissness , i guess i wasted that 5 dollar on the ch341a , but im happy that it is working again before my order arrived . thank you soo much
I can confirm this works on MSI RX 580 OC ARMOR 8GB
+ this fixed my older problem which made me to brick the card
My rx 580 was crashing at stock speed 1366@2000 i had to downclock it to 1200mhz and undervolt it to 900mv to make it stable
Now after i fixed it with your method i tried to run furmark at stock speeds and wow it is stable at 1366mhz no crashing no more
Im really happy and thankful to you ❤
You are the absolute boss! I was sick from bricking my Gigabyte 5700XT with 3.04 and with your instructions I resurrected it and its back mining. It was a little unnerving running the card with no heatsink so I put a little one on just in case but it never got that hot. Thank you so much!
To solve the hotness I put the schroud over gpu to help me flashing again
Thank you soooo much man, i searched two days for a curation. Greetings from Germany (Gigabyte Card)
Kannst du mir bitte helfen?
Ich weiß nicht was ich machen soll
Its mid of 2022 and still your trick saved my gpu. Its a gigabyte 5700 xt that you helped me to save. Thanks a lot 👍
You sir-Are a stud for posting this. Thank you. Liked, commented and subscribed.
Thnks SOOOOO much. I flashed 3 other ones and when I got to the gigabyte it bricked just like yours did. So glad there’s suck an easy fix
You are a freaking saint
Glad this helped you!
@@curatedcomputing Just to confirm, were you able to extract the original BIOS using version 2.93...then edit the straps...then flash? OR did you have to use a BIOS file found online? In my case... I used 3.04 and someone in a mining discord was kind enough to give me the OC Bios which worked.
Thank you for your feedback
@@rajnificent I backed up using 3.04 and could flash back with 2.93. I wanted a modded BIOS though so I used an older one I found online and modified the timings and added an MPT file to it.
Quick tip: If you have a dual BIOS GPU (like the Aorus 5700 XT), and you mess up one BIOS and want to recover it without disassembling the GPU, you can start with the working BIOS. Just when it displays video, quickly switch to the faulty BIOS. After that, you just need to follow the instructions in the video to flash the original ROM.
Great video. It's worth noting that for $8 you can buy a ch341a programmer. Then you can flash without running the card on a riser. Cheap insurance to have on hand before attempting a refash.
wouldnt that take removing the chip off the card?
Guy, I have ch341a programmer and it's not working when I flashed the bios until I used this short pin 1 and 8.
Holly shie this is working , but I got no display output but I know my system get into post. I remove the gpu inorder to get display and fcking memorize the step so I can flash the hd7790 bios . and you know what ? ITS FOKING WORKING. THANK YOU SO MUCH MANN I LOVE YOU
It worked man, thanks man you saved my rx 5700 xt gigabyte gaming OC 8G Rev.1
Cant thank you more 👍🏼👍🏼
Before i do the same, what version bios were you trying to flash onto your rev 1?
Hey download the stock bios from gigabyte official website. You will get an exe file in that folder. Just execute it. Press the flash button and u are done.
@@ray2682 Yep I can vouch for this method, thanks for posting this!
Will this method work for me too? I saved the stock bios, modded it, flash back the modded one into my 5700xt gigabyte gaming OC 8G. It flashed successfully but then when I restarted my PC, it didn’t boot. Now when i put this card into my rig, like on a PCIe slot or riser, my computer/rig does not boot. Doesn’t matter if i use dedicated graphics, or put this card with 5 other cards, this card alone does not let my rig boot.
i had this exact same issue....you have to use the method shown in the video to bypass the bios from loading on startup, and then use AMDVBFLASH 2.93 to flash the stock bios back on to the card....the issue is with using AMDVBFLASH 3.04....you MUST use 2.93 to flash the Gigabyte 5700xt specifically.
@@xx_ORiO_xx Yes, Gigabyte cards are a pain there is a special package to install and unlock the stock bios/downgrade then you can flash a modded bios
@@xx_ORiO_xx I used 2.93 but still my Pc won’t boot after the restart
You are a god??? This save mi GPU.... Thanks
Sounds like you are the hero. People like you do exist 😂. You are a real superhero
thank you sir. this really was a helpfull video. thanks again from Iraq
You saved my ass. Thanks a ton man! You’re the best. :)
YOU ARE THE MAN!!!!!!!!!!
I bought a TUF 3 RX 5600 XT used, it doesn't post and my PC doesn't recognize it, when I check on display adapters it shows it as a Microsfot Basic Display Adapter, any ideas :c
i have the same problem!
i flash my rx5600xt after reboot black screen underscore, i can't turn on pc when the card plug in with any pc. help please...
same as mine no boot at all.
@arthas law @danilo macario did you both fixed this issue? if yes, can u comment here the method you use? i have the same problem.
thank you
Hey this helped me recover quickly. Thank you!
I had the same problem on a MC 5600 XT video board and installed a notice of an XFX video board of the same model and I needed to know if to make the short circuit I needed to do it with the board on with the board off
My native language is Spanish and although your level of English is quite clear I can't understand that point
@@Lynchz en alguna de las preguntas están los pasos en español.. pero la tarjeta debe estar coectada con la compu apagada. haces el corto y enciendes la pc mantenienndo el corto hasta que aparezcan los logos de inicio de win
Thank you very much!!! you saved my card~ thank you!!!
EXCELLENT VIDEO. SAVED A 5700 XT FOR ME!
Having the heatsink off, is that going to cause temps to rise and damage the card when doing this method? Im weary of it burning up doing this way
I have just bricked my Gigabyte RX 5700 XT Gaming OC 8GB version by trying to update the bios everything went fine and after finishing updating the bios retstarted and JUST a "white "-" on the monitor.. nothing else. I cant either bios or windows, totally stucked. Please help me. I tried resetting the bios by touching the mentioned 2 diagonal pins, nothing happens.
I also have a bricked 5700 Sapphire Pulse. It is not detected on Windows or any AMD flashing tools. I tried to short the Bios with the pins as shown on the video but nothing happens when I boot. The fans are spinning but can’t get the gpu to be detected. I’ll just take the L and move on, rip.
@@charlesd7301 This only works if you bricked during a BIOS flash, you might have other hardware errors. If your PC won't post with the GPU installed and is fine when removed this method should work.
This Helped for MSI RX 570 8GB , Big thanks, Liked subscribed 5-5-2021
guys help. Still adapter not found.
Should I only have a card with a damaged bios connected when the jumpers are closed?
You saved my new 5600XT!! Thanks!!!!
Hey i was wondering if the latest version of amd vbflash still has issue with gigabyte card? This video is 4 Years so i thought maybe it's fixed in latest vbflash version. I posted on pcmr someone replied they flashed successfully with the latest vbflash
Thanks for the video! Perfect!
hi, im trying to recover mine, im wondering did you connect the card with pcie as well?
Hello, can You say - what ticness of thermal pads on memory, power chains and on memory from the backplate? (for Gigabyte rx 5600 xt)
hey I have 5 6700xt but different brands. I mistakenly loaded a XFX speedster 6700xt bios setting onto a Red devil 6700xt card. The card works fine but every 2 days my screen just freezes and I was thinking could this be the reason?
Hi thanks for the help! I did the same thing and my card didnt post! I changed the video to onboard, and my 5700 is recognized on amdvbflash.. the steps from there are the same? Thanks again!
I would like to know why is it does everyone everywhere seem to avoid talking about the amd 5500 xt card? does this fix work for the 5500 xt card??? I need to know please? No information anywhere.
Question, so I used this method and got the stock bios back on and the card is working again. Can I just use 2.93 to flash the edited bios onto this card or do I need an unlocked bios for this specific card?
5600XTs in my experience need an unlocked MSI bios for mining. DM me and I can send you the BIOS if needed.
Not sure if I'm doing this correctly but when I touch pin 1 and 8 it beeps at me but still doesn't post. Any suggestions?
Mine is still not posting does anyone else no a way other than using tweezers
mine wasnt posting but then it did it again, yet amdvbflash does not find the adapter, and i did use amdvbflash 2.93plus
not sure what happened or what to do next
i am right before going the shorting method as well
@@13capivara13 i have the same that not find the adapter, did you fix it?
@@brianhernandez9826 hi, yes, shortening with tweezers worked for me, short the pins, boot up the pc, as soon as windoes starts you can unshorten the gpu again, reflash with original bios, done. but it might take several runs, i had issues with the reflashing process. after reflash etc, DDU the system and reinstall the drivers. worst case reinstall windows/the full system
@@13capivara13 i did this one but amdvbflash -i give me a result of fail and won't read my stock rom
@@brianhernandez9826 try to post and use amdvbflash 2.93+ but dont unshorten the pin before -amdvbflash -i
you need to give all of this several tries, its not always working
Hi, is it the same procedure for sapphire pulse rx570 card? Thank you
Tried pins 1-8 on tuf gaming 5600xt. I got mistaken and flashed the strix bios on accident and I keep getting a white vga light error but no boot.
Hi,
What were the symptoms ? Were the fans even spinning ?
You saved my life!!! Thx u so much
I have three MSI NVIDIA GTX Supers. Two out of three took the new BIOS that increases the hashrate from 31.81 to 34.6MH/s (Hynix memory only!) but the third one bricked. Can't post with the card. Wondering if this will work? Can you comment?
hola, tengo una aorus gtx 1070 que no se cual es el chip del bios tiene 2 winbond 25Q40 en los 2 lados de la placa en un lado esta uno y al dar vuelta la placa hay otro igual cual de los dos seria??? gracias
Thanks for the video. I have a question....I'm having the same problem with ASUS RX 5600 XT GAMING MX. Do you know where can I find the original BIOS to flash the BIOS correctly?
EASIER no HARDWARE fix that worked for me: plugging the brikked bios gpu AND one more gpu (i had a brikked XFX RX 5600XT Thicc III Ultra, and used a spare RX 570), boot into windows using the good gpu as output (you can probably pull this off with iGPU/Integrated Graphics too). Once in windows, open device manager, navigate under Display Adapters, right click the dead bios gpu and 'Disable' it. Once you do that, just open AMDVbFlash (latest version available on techpowerup), and flash your bios backup. Reboot, open device manager and re-enable the dead gpu. This fixed my 5600XT, i hope to have helped someone out there
Do you mean the two on the left (up and down) or the one with the arrow down on the left and the one on the top on the right? I've tried to do the latter and it didn't work. Tried the first and it didn't work either..
Will this work with a Powercolor Radeon VII or is it only for 5600xt / 5700xt?
So that I understand it correctly you start the PC via an integrated graphics unit and not via the graphics card? And u hit the 2 Pins so long u see on the monitor that the PC is starting?
Good to know if there is an option if i screw things up, i have a couple of xfx 5700 xt triple dissipation (v2.0) which is moded, i was trying to find the original bios for it, but there was nothing on the internet, can u help me find one?
Wow, those pins are very small on the chip.. I think will buy an USB SPI programmer to use :)
Thanks for the video, it was very informative.
The bios signature, is it only used when flashing, or is the GPU validating the signature when booting? If I program a modified bios with no valid signature using SPI programmer, will it boot?
Heyy i need help! I am trying to reflash gaming x rx 570 to it's original bios! But it breaks my gpu whenever i flash the ones on techpowerup. Could this be atiwinflash version issue. If yes whjch version can i use for rx 570
ok i did this exact thing, bricked my 5600 xt, ive tried this trick with the tweezers and it wonr work, i have a xfx thicc with the dual bios, it had two bios chips, the switch was in the OC position. since theres two bios chips which is which? it will boot in the silent mode
It does bootup to windows but the screen is still black , im using Teamviewer to flash bios but get this error "no display adapter"
My gpu is sapphire rx5600 xt , it have bios switch but only one bios worked went i bought it
is it safe to boot without the video card's heatsink? I'm gonna try this but I'm worried
Yes it's safe but take in count it's gonna heat up really fast, so place the heatsink after you release
Is it possible to update the bios via a laptop?
Do you need a PC?
thank you
Thanks bro. I did it
THANKK YOUUUUU !!!!!!!!
Hey, i tried this multiple times. And i still get a black screen when i short them. Any idea what i may be doing wrong? Any advice from anyone please.
Please help me i just bricked my SAPPHIRE PULSE 5700
my components are glued before welding, I am at 430 ° with the hot air station, the component does not come
what the purpose of shorting the rom pin?
Thanks for the tutorial. Sadly, this method did not work for my card.
oh my god you saved my life. love ❤❤❤❤ you bro
How to do it please
@@Helldevers2Cheatsif u from are you from india?
Thank you for this gem! by the way, is it possible to skip the shorting of IC 1 & 8 and proceed with the cmd?
Hello, please their is any software solution about memory temperature for Asus Rox strix Rx 5700 no Xt, my memory temperature while mining is about 94 degrés, thank you
Hello, I did not understand how to make the bios bridge? Could you specify that part ..... I would appreciate it. I have a garmin x rx 5600 xt ..... it does not work anymore, nor does the mother start me, by bridging which specific pins? should it start anyway?
Pins 1+8 on the BIOS chip
So flashing the card without a cooler is fine? Won’t get too hot?
Yeah just don't run a load on it
Nice trick, hope it will work for nvidia gpu, thanks man.
Hello does the gpu need to be in a riser in order to flash it like this or is it ok to do it directly in a pcie slot?
thx in advance
i'm curious too if it only be in riser?
PCI slot should work, riser just gave me more room to work with
@@curatedcomputing thanks
love it
Nice video, but it doesn't work with my Sapphire Nitro+ 5700Xt. What about dual bios cards ?
hey can you do one for the rx 580? I flashed my bios and I can't open my drivers or install them without my screen turning solid blue and flashing. I also cant open ati flash without getting a solid blue screen and my pc crashing and restarting please help. I need the stock bios.
same problem for me on rx560 :( i have tried everything thi is the last hope
What did you flashed ?
Saved me as well thanks mate
hello, please I'm stuck who can help me please, I flash my Asus Rog strix Rx 5700 no Xt, with amdvbflash I got an error message that the -f is not supported, then the flash continued and asked to reboot, after reboot no image, then I restarted in Q mode I tried the same with the stock bios the flash worked but still no image on the mode P, I tried on the machine of a friend who has a built-in card I flashed the card again but with another asus Rx 5700 bios, there the fans stop and when I try to flash with atiflash I have an error message telling me error program rom, is my card stuck? when I do on AMD flash -i I have the navi10 information ..... etc, please who can help me I am blocked I bought this card not two months ago, thank you in advance
when trying to flash the vBIOS with amdvblash i get error 0fl01. Any suggestion ?
Card not detected, try a different version
Hola no entendi como hacer el puente de bios? podrias especificar esa parte.....te lo agradeceria
Apagas la pc, puenteas el bios con los pines 1 y 8, encendes la pc y cuando te da imagen soltas el puenteo, luego la flasheas y deberia quedar bien
Gracias
Will this work even if my 5700xt wont post display to begin with?
This did work with the riser, not sure if it was a faulty second pcie but i booted with an old gfx card and reflashed with the riser.
How did you do that please
@@Helldevers2Cheats Buy a riser and install it in a free slot. Either boot with mobo graphics or a second gpu for display and re flash the card.
Do you have to have a integrated graphics cpu in order to do this method?
I believe so
Did u manage to modded the bios for Rev2.0 / V2 Gigabyte 5700xt ?
Yes I have successfully
My 5700xt completely dead, I used other card to get in to bios my gigabyte 5700xt not detecting in bios
hello sir, i mod bios MSI GAMING X 5600XT, mod bios success no error, but after restart the computer no signal to display and HDD signal no flashing, my display use integrated GPU from processor, can you help me sir...
I think you have to go into system settings and disable your integrated graphics. I’m not sure though but look into it
Hi thanks for this great info. what if I don't have the stock bios file saved?
i did this one but amdvbflash -i give me a result of fail and won't read my stock rom. can someone give me and idea on how to fix it? thank you
do you fix it?
After the restart my Pc won’t post please help
Thanks for the video, i was able to get it back to stofk bios, is there any way to mod bios the gigabyte 5700xt?
Can u guaid me
Good brother
The only mistake that you did was to use fcuking windows. I bricked my cards several times while doing experiments with the vbios, and recovered without taking the gpu apart. Further more, that was done remotely on a big a55 12 gpu rig running hiveos. Just toggled the maintenance without loading drivers, rebooted and reflashed with a working vbios.
One more...if the gpu was bent over by the window, and won't post, flash hive into a usb (you'll need an account if you don't have one), boot it without the card, set everything up, upload the good vbios, toggle maintenance without loading drivers, turn the pc off, connect the gpu through a riser or the mobo and don't hook up the riser power or the gpu if on the mobos pcie. Turn on the pc, and hook up the power to the riser or the gpu while booting up, then make the gpu great again.
Bro shotout 2 pins in runing mod or in off mode
Would you be able to make a video on where the chip is on the 5600xt? I have the same exact one but it solved the issue of no post, whereas now there is still a black screen after the cpu ram vga boot leds post. I believe I’m shorting the wrong one now.
Get your monocle and google the smallprint on the chips, theyre all roufhly same size, 8 legged buggers.
@@kevinbaker2470 yea i ended up having to solder a new bios chip lol
@@Hafizul12 hopefully it wasnt crowded. They usually arent. You desolder, or have to use hotair?
@@kevinbaker2470 desolder, just swapped with a new chip flashed with a working stock bios from ebay.
so you have your hand on the tweezers holding it short... and waiting for what?? for it to post? what exactly does he mean?
UM, I think that's pin 1 & 5, pin 8 is above pin 1
All I did was when I screwed mine up was reflashed the saved back up bios in hive os and it started working again. I didn't need to short out the bios.
how about downloading the amdvbflash dos version and bot it on usb along with .rom file and flash it on the windows bot. it also fixes the broken bios
Hey Idk if your going to get this, could that work
@@lugia2204 yes i fixed my rx580 8gb sapphire nitro+ by this method
I just wanted to make sure what your saying is that fixed the gpu that was already bricked or you were testing thr settings of the rom if it was going to brick?
@@lugia2204 no i am saying if you edit the bios of your gpu and after flashing it your gpu did not respond, in that case you can reflash your stock bios again through dos commands to make your gpu working.