Repkord CR30 X-Rail Upgrade Install Guide
HTML-код
- Опубликовано: 23 авг 2024
- Overview of installation for the Repkord CR30 X-Axis Linear rail upgrade kit for the Creality CR-30 PrintMill 3D belt printer available for purchase here: www.repkord.co...
Resources:
3D Printed Parts / File Repository: drive.google.c...
Please feel free to contact support (at) repkord (dot) com with any questions or concerns.
Great Video!!! I've already installed this kit on both of my Cr-30's and it works perfectly...
Nice and in depth! the pimp game is strong on the 30
Great video and thanks for making these available Pooch !! Stay safe !
Awesome video. I feel like this printer has really lost it hype in the past 2 years. Everyone is so focused on the XL/mk4 and X1c/P1P. I really would like to see a high quality version of this style of printer straight out of box with limited flaws and a community behind it to better advance the firmware side for ease of use. Instead of chinese companies 'Creality' cutting corners to drive price down. The 3d community I believe are wanting quality and long lasting machines with their investment even if its a few hundred dollars more for upgrades we are willing to do anyways.
@repkord Do you have alignment measurements for the linear rail holes on the mounting plate you could share since the kit is sold out on your site? Thanks!
Great video, thanks
Why can't I buy these anymore???
Since they don't sell the Kit where can I get the 3d printed part mentioned in 0:33 ?
Nvm did a second look and found it in description. Best guide ever!
I upgraded to linear rails on my y axis and my x gantry is not quite 90 degrees....
any ideas>
so i have an issue where the right leveling knob is too close to the extruder head housing and i cant level the bed to the nozzle without the housing hitting it. what can i do
I am suffering from the same phenomenon.
As a tentative measure, I made a spacer based on the model of the spacer used for fixing in the video.
The width of the model (Z-axis direction in the printing direction) has been shortened from 25 mm to 5 mm, and the height (Y-axis direction in the printing direction) has been extended by 10 mm.
This allowed me to offset the position of the X limit by about 5mm.
I seem to have forgotten one thing to adjust.
It seems that the "Y-axis end stop on the left and right pillars on the back side" should be moved to the bottom.
The spacer I made became unnecessary in a day.🤣