Sweet! I was debating on stretching tires on 15x8 or 15x10 rims. This video just helped me decide what I'm gonna run. Thanks for posting this. BTW beautiful truck🤙🏽
Where did you bought or do you know where I can buy longer wheel studs because the wheel pattern is same as bolt pattern the only issue is that the studs are to short to tight down the wheel lugs . So if you or any one have some info where I can order or buy a extended wheel studs for Nissan hardbody. thanks you in advance .
Any driveability issues since the setup? Like bottoming out on rim or hard cornering concerns? It looks awesome but scary to think of at high speeds on the freeway, I've done 225/60/R17 on 17x10 rims before and that looked sketchy as is.
Nope never had an issue with the setup, I’ve driven through LA where pothole are huge, driven on the freeway at normal speeds 60-85mph and have also hauled quads and decently heavy loads for a minitruck and never had any issues
@@STONEBROKEGARAGE Nice! I used to see these setups in the 80's alot with the mini trucks and even full size trucks, it's rare now unless you go to Japanese classic car shows. Probably changes the gear ratio due to the skinnier tire but not a big deal on the streets. Btw, was that tire shop on Vernon near Vermont? Looks familiar..
Im getting new wheels 15×6.5 , Is there a way I can also run stretched tires like that. Also how much did does tires cost U ? do they charge U more to be stretched
I personally wouldn’t try stretching a tire on anything less then a 8 wide. Tire will be way too small. 195 is already small. Prices just went up even more so a full set of tires runs me about $320
No, it’ll work just fine. I said I need to lower it before installing these wheel’s just simply because of look’s. A stock ride height with small wheel’s will look a bit off.
@@STONEBROKEGARAGE thanks for the response. what offset are your wheels? im looking at 15x10 -44 and 15x10 -39. but curious to know if both could clear the brake calipers and inner fender walls. stock height and stock calipers rn. my mini truck is a 94 toyota pickup 2wd
![Baby Kia - WYG (feat. LAZER DIM 700) [Official Music Video]](http://i.ytimg.com/vi/avlLsOH_oJc/mqdefault.jpg)
Sweet! I was debating on stretching tires on 15x8 or 15x10 rims. This video just helped me decide what I'm gonna run. Thanks for posting this. BTW beautiful truck🤙🏽
Glad it helped out !
3:46 no quema cuhh
80's baby! thank you for trying to explain to these new cool fools
Name of wheels??
Do you think these would look good on a 1986 Mazda b2000?
Badass super clean im gonna run these tires on my 15x10 daytons
Nice !
Hey bro how did you get those rims ? Did you order online or found them at a rim shop
No smack talk here. They looking proper.
Nice .. been waiting for this explanation
Im going to try 50 series on my 81 impala stock wheels. wonder if the hub caps will look good stretched?
They look amazing.
I have the same wheels basically.
I'm running Optimas 15x10 205/70s
Nice ! Sounds like you got a good setup
Where did you bought or do you know where I can buy longer wheel studs because the wheel pattern is same as bolt pattern the only issue is that the studs are to short to tight down the wheel lugs . So if you or any one have some info where I can order or buy a extended wheel studs for Nissan hardbody.
thanks you in advance .
I love the stretched tires🔥🔥🔥🔥
Thank you !
@@STONEBROKEGARAGE you're welcome bro the truck is looking good👍
Dam they gonna be sitting right on the 720!
I sure hope so !
No Smack more like yes that's dope
we love it...we did this on a 1989 s-10
Nice !
Looking better than a Silverado any day 🤙🏾
Thanks man
Nah
F the people that's hating that's sick bro 5 star I'm a fan of wheels
Imma 01 baby wit a old soul🗣
Hell yeah
Where can I buy those specific tires? I can’t find them anywhere. Please help.
Those tires are sick....😅
I have a Toyota hilux 1987 I wanted size 16x8 or 16x9 and what tires to stretch ? Wat size tires should I go for ?
185/50R16 but it all depends on how much stretch you want
Those rims stick out right 15 by tens are normally reversed trying to put them on the old-school mustang
Yes they poke about 2” & nice that would look pretty good !
If I have 18s n I go 15s how would it look if am low already
Looks bad ass homie
Thank man !
what size tire should I get for a 15x10 to have same hight as you but a little less stretch
205/50 maybe 215/45? I wouldn’t be able to tell you
Bro where in the world did you get those rims? I need them
Used from a local seller
Nice bro! So 195 60 r15 will be no problem in a 15x8 for daily driving? America's tire won't mount my tires smh
Size of the rims?
15x10
Any driveability issues since the setup? Like bottoming out on rim or hard cornering concerns? It looks awesome but scary to think of at high speeds on the freeway, I've done 225/60/R17 on 17x10 rims before and that looked sketchy as is.
Nope never had an issue with the setup, I’ve driven through LA where pothole are huge, driven on the freeway at normal speeds 60-85mph and have also hauled quads and decently heavy loads for a minitruck and never had any issues
@@STONEBROKEGARAGE Nice! I used to see these setups in the 80's alot with the mini trucks and even full size trucks, it's rare now unless you go to Japanese classic car shows. Probably changes the gear ratio due to the skinnier tire but not a big deal on the streets. Btw, was that tire shop on Vernon near Vermont? Looks familiar..
Donde puedo conseguir unos de estos para mi d21 ?
How much were the tires mounted?
Im getting new wheels 15×6.5 , Is there a way I can also run stretched tires like that. Also how much did does tires cost U ? do they charge U more to be stretched
I personally wouldn’t try stretching a tire on anything less then a 8 wide. Tire will be way too small. 195 is already small. Prices just went up even more so a full set of tires runs me about $320
Estan hermosas se ven con madres se va aver bien subes fotos cuando esten en la troca
Where did you buy the hardware for the center caps? I have the same wheels but im having trouble finding the hardware
MCFadden dale in Ontario CA
Were u got those tires i have same rims
you said you needed to lower it first before installing the wheels. why? will any complication pop out if installed with oem suspension?
No, it’ll work just fine. I said I need to lower it before installing these wheel’s just simply because of look’s. A stock ride height with small wheel’s will look a bit off.
@@STONEBROKEGARAGE thanks for the response. what offset are your wheels? im looking at 15x10 -44 and 15x10 -39. but curious to know if both could clear the brake calipers and inner fender walls. stock height and stock calipers rn. my mini truck is a 94 toyota pickup 2wd
@@John-co2yz 15x8 -19 with 195/60-15 fit flush and no complications 3 inch blocks and torsion bars. 1992 Toyota pickup single cab 2wd
What tire would be good for 15x8 on my 1996 nissan? They say 235/75/15
Back in du late 80s I ran 195 50 r 15 on 15x8 offset enki 26s..
What brand of wheels are those?!!
Eagle alloys !
How much you want for the wheels?
Not forsale sorry
Where did you find the eagle alloys at?
Where can I get 4in blocks at?
Amazon, eBay, bell tech
Bad-ass bro!!
Thank you
Offset?
Clean ‼️✅
Are the rims 15x10s?
Yessir
What offset?
-48 I believe
I had a similar wheel but was a 16" way back in high school on my 76 c10 but had a fat meaty tire..
Nice !!
que marca son tus rines hermano
Eagle alloys
Respect 👊
Thanks
Hey bro are you planning on getting rid of the old rims ?
Possibly why ?
I liked them since you've gotten the 720, I'll be down to put them on my hardbody lol, how much would u ask for them?
Message me on instagram bro
Where you find those wheels?
Used online
Que marca son bro
Eagle alloys
195/50/15
Bro what are the wheels I been looking fo4 them let me know thank dude
Eagle alloys 028’s
no quema cuh
Clean
Thank you
where can I get a set of rims American eagle like yours brother,thanks in advance
I got my set used, they are becoming hard to find
thanks
🔥🔥🔥🔥🔥🔥🔥
Thanks
What wheels are those
Eagle alloys
What is the name of the rim design
Eagle alloys
@@STONEBROKEGARAGE thank you highly appreciated
6"or8"
Should have ran 195/45R15
My friend runs that and it’s way to small
STONE BROKE GARAGE Not small for a mini truck.
Americuhhhs?
Yessir
whats the offset bro ?
I believe -48
@@STONEBROKEGARAGE thanks fam
Rip beads...
If you haven’t sold the wheels yet I’ll buy them off you
Message me on Instagram
What’s the name of those wheels my man
Eagle alloy’s
@@STONEBROKEGARAGE thank you my man
Keep it up with ur videos 👍👍👍
Wheels are going to shits curb rash !! No side protection
If you know how to drive there is no need to worry about curb rash ..
Just get low profile tires
beautiful rims.
Thank you
3:45 😂😂
CUHH
What’s the offset I’m tryna get some for my 94 d21 hardbody
-48
Clenn
Gay rims
🤮🤮🤮🤮🤮