I picked up a 94 hardbody back in march. First thing I wanted to do was drop it on the cheap. Found your Video and WHAM lowered my truck for $34 !!! Thanks for the info an video u da man!
love the video, My 80 Datsun 720 king cab height is like a 1" or 2" lower on the driver side than the pass side. Is all i do is tighten up the driver side to bring it up some, or do I have to pull the bar off and move the spine a notch over a turn on driver side to go up a little? I want to bring up the driver side to match the passenger side height
Nice truck man, sad to see what happened to it. I was thinking of doing the exact same thing to a 1980. However when I checked the link it says it wouldn’t fit. Do you think it would fit? Don’t want to buy and put in all the work if at the end of the day it won’t fit.
I wouldn't recommend this for anybody who doesn't know what they're doing. My dad and I raised mine up and it was a pain to get the blocks out. If you want to still do it go ahead but I'm warning you
Not really tryin to point this out but, if you jack up the rear of the truck, your wheel chocks should go in front of the front tire. Just trying to keep ya safe bro
In my opinion it’s not worth the work, 1 inch would only be noticed by you since you did the work but no one would be able to tell. I even think 2 inch isn’t enough but that’s me haha
My 720 is very low i broke my torsion bar key is there any places that sell them because I can't seem to find them and I want to get rid of my lean to the right
STONE BROKE GARAGE I have a Nissan hardbody with 4 inch blocks and a leaf redrill and it makes a wierd noise people tell me it’s cuz I don’t have angle blocks not sure tho
Hey bro, so i ended up dropping my hardbody with 3” blocks and adjusted torsions to match. But after a few months im noticing my fromt end is sagging down more then i originally adjusted it. Is it possible my torsions are going bad? Or do you have any suggestions? Thank man love the vids
That’s just the way they are. When you adjust them to a certain height they always sag a little more because they settle. You could either leave it or raise them up a bit to match
![How To KA Swap Your NISSAN 720 Pick Up Truck ( SERIES 1 ) - PART I [MOTOR MOUNTS]](/img/1.gif)
I picked up a 94 hardbody back in march. First thing I wanted to do was drop it on the cheap. Found your Video and WHAM lowered my truck for $34 !!! Thanks for the info an video u da man!
Haha that’s right man I’m glad to hear !
STONE BROKE GARAGE where do you live
80's baby...we love it..smart man...you dont have to explain to these new cool fools
Cut the bump stops with a zaw zall you'll get a smoother ride
Just installed 2” drop spindles and it feels as if i left the truck at stock hight!
That’s right !
excellent job
I did that my d21 but the bad thing in Guadalajara Jalisco Mexico the roads are orrible greetings
I’ve been there and some a pretty bad haha. So are the roads where I’m from
With 15x10 and 225 50 15s how much would you suggest i lower the truck
love the video, My 80 Datsun 720 king cab height is like a 1" or 2" lower on the driver side than the pass side. Is all i do is tighten up the driver side to bring it up some, or do I have to pull the bar off and move the spine a notch over a turn on driver side to go up a little? I want to bring up the driver side to match the passenger side height
Hey man do those two long bolts just tension up by them selfs after lowering and riding it or how does that work
I used to use a angle block when lowering.Ao you don’t need a angle correction block?
Hi there, first of all great vídeo...
Can you tell me the torque for the u-bolts?
Thanks
What kind of wheels are on the last truck in the video?
I want to lower my square body Chevy S10 from the rear so I just need the rear kit right bro
Yeah
Hola bder una pregunta que tipo de ring andas y que medidas de llantas andas .se ve bien bonita X que bajo aún más saludos bros desde Nicaragua
15x10 riñe y 195/50R15 llanta
Great video. Subscribed
Clean truck
Nice truck man, sad to see what happened to it. I was thinking of doing the exact same thing to a 1980. However when I checked the link it says it wouldn’t fit. Do you think it would fit? Don’t want to buy and put in all the work if at the end of the day it won’t fit.
Hey I got a Nissan d21 I have lowered by blocks n torsion. I want to know how you got your sponsors and all
Hey bro I have ? For you I have 1984 Nissan 720 I just purchased but in front is to lower indeed to reindex torbar how hard is to do
There is no need to reindex the torsion bars
Really helped, screw bags bro. No front splitter ? Aha
Haha that’s right ! Splitter ?
Is there any difference between the block brands other than price? Great help btw!
I’ve bought cheap blocks ($30) & I’ve bought expensive name brand blocks ($150) & I don’t see a single difference
I wouldn't recommend this for anybody who doesn't know what they're doing. My dad and I raised mine up and it was a pain to get the blocks out. If you want to still do it go ahead but I'm warning you
Love the video. Trying to figure the best way to lower my 1986 dodge ram d50 (Plymouth Arrow) it's a budget build. Keep the videos coming.
Not really tryin to point this out but, if you jack up the rear of the truck, your wheel chocks should go in front of the front tire. Just trying to keep ya safe bro
Appreciate it!
Hey bro do you know if a 1 inch block even makes a difference? Is it noticeable?
In my opinion it’s not worth the work, 1 inch would only be noticed by you since you did the work but no one would be able to tell. I even think 2 inch isn’t enough but that’s me haha
My 720 is very low i broke my torsion bar key is there any places that sell them because I can't seem to find them and I want to get rid of my lean to the right
Junkyard would be your best bet probably
What else did u add in the rear to get that extra 2 inches bro ???
What extra 2”? I took out the 2” blocks and replaced them with 4” blocks
What’s the safe max lower height for the front in inches
Realistically like 1-1.5” lower than factory
Does ur hardbody in the rear make a wierd noise in 4th gear when ur driving
No I don’t think so
STONE BROKE GARAGE I have a Nissan hardbody with 4 inch blocks and a leaf redrill and it makes a wierd noise people tell me it’s cuz I don’t have angle blocks not sure tho
Do all 6 lug rims fit a 720
If I go 3 inches in the front? But I'm just cruising around should I be ok?
You should be okay with only 3”
Great video bro! Thoughts on bell tech 2”inch drop shocks?
I’ve never ran them personally but I’m sure they would feel great since they are new shocks !
What are the wheels on the black Nissan?
15x10 steelies
Does an 86 nissan 720 have this front torsion bar suspension?
Yes all Nissan 720’s have it and hardbody as well
@@STONEBROKEGARAGE so it should be easy as hell to lower it even though it'll ride rough.
Hi bro.. I 'm from malaysia.. What a block and U skru name? I want seacrh in marketplace
Belltech.com
What’s size tire was on the old wheels ?
205/60R15
Gonna do this a suburban wish me luck 😣
Should be dope once done !
STONE BROKE GARAGE yeah so I don’t know much about American trucks I have to do some other sht I was used to dropping hardbody 🙃
Hey bro, so i ended up dropping my hardbody with 3” blocks and adjusted torsions to match. But after a few months im noticing my fromt end is sagging down more then i originally adjusted it. Is it possible my torsions are going bad? Or do you have any suggestions? Thank man love the vids
That’s just the way they are. When you adjust them to a certain height they always sag a little more because they settle. You could either leave it or raise them up a bit to match
Damn alright, thanks for the help bro! I was honestyl just thinking of putting in 4” blocks and taking out the 3” so it gets even that way lol😂😂😂😂
RIP
I know this a crazy question but can you stack the lowering blocks???
Technically you can, but I wouldn’t recommend it. It’s very sketchy and it’ll make your rear bottom shock mount super close to the ground.
@@STONEBROKEGARAGE ok man thanks., I just want to go low but with no bags
Check out my channel, I have some alternative ways to go low static without stacking blocks. My yellow hardbody is laying frame static
ik this video old, but will these work on my 98 tacoma??
They make blocks specifically for Tacoma’s
@@STONEBROKEGARAGE I would appreciate any links to where i can get them
what's ur wheels specs bro
Next time just cut the u bolts on top the axel... 15 seconds and done
Mate that's not low thats on railsss
ree drill the shakle
Bet it didn't improve the ride
Nope still the same as it was which is a plus for me because I was expecting it to get worse !
Bro, you’re mexican.. why just the american flag?
Sell me your old wheels?
Ano vos habla en español no jodas
First
That’s right