Vous avez placer des lamelles neuves (intérieurs et extérieurs) de l embrayage mécanique , et c est toujours facile avec le constructeur...BMW.. Algiers.. Merci !
Hello everyone . I need some help. I placed the clutch kit in my 1200gs LC 2015 model couple days ago and I followed the instructions , torque the bolts at clutch basket 10 N and when i was ready and started the bike i heard a dance noise from the clutch basket , time to time it stops and then back again , also when im pressing the clutch lever also stops, but no problem( yet )with rest engine behavior when im riding. What sould i do ?
Amigo, hice el procedimiento correctamente así que cuando apreté los tornillos al final, la campana giró un poco, luego después de presionar el embrague no se movió, ¿qué puede ser?
hello I have a BMW 1200 GS 2013 in gear changes it is very hard and noise was only the first gear now it is almost all could give me some guidance I'm Jorge from Brazil ..
Hello Maria, Thank you for the comment and watching our video. If you could e-mail our Customer Service Team they will be happy to answer any of your questions. Their e-mail is customerservice@rekluse.com. Thank you!
Hello Roberto, thank you for the feedback and your question. When removing the belt, the shock will spring back from compression so use caution. Please feel free to reach out with any other questions.
Congrats, your video is excellent. By any chance does Rekluse sell the Engine Housing Gasket? I need to replace my cover for the 719 Billet but can't find the gasket part number...
Great video, very professional. Can you tell me why they saying that to replace the clutch on the GS 1250 or 1200, that pretty much you need to separate motor? Was this in older models? Thank you.
Hello Jeff E, thank you for your response and also your interest in our products. We do not mark our plates. You would just measure the clutch pack to ensure the correct height. Hope that helps. If you need anything else, please let us know at customerservice@rekluse.com. Thank you!!
Hi Cesar, Thank you for your question. Our TorqDrive clutch is a clutch pack replacement meaning we will be changing out the friction disks, steel drive plates and pressure plate springs. What makes our product different is our unique steel core TorqDrive frictions disks. Our disks are thinner than OEM so we can fit more into the clutch pack (12 disks instead of 8). The benefits being more torque capacity for reduced wear, reduced heat and increased power transfer capability. Clutch feel and modulation are also improved. If you have additional questions, please don't hesitate to reach out.
Great question. Here's a video that goes over the benefits of Rekluse TorqDrive technology- ruclips.net/video/OsSPeEWCtyM/видео.html For more questions you can also reach us at (208) 426-0659 8AM - 5PM MST.
97K is impressive. This clutch pack should reduce heat and increase life over stock. If you ride the same exact way for another 97K this clutch will last all of that and more. Generally speaking we see 2-3 times clutch pack life with our TorqDrive products. In your case this may be a stretch but would expect more life.
Is it recommended to install a Rekluse Clutch on an R1250R? I have yet seen installation Videos for Off Road bikes only. I like the idea to leave the bike in gear at a red light and go off just like that...
The TorqDrive clutch featured in this video is a manual clutch pack replacement for the BMW. We are working on a centrifugal RadiusX clutch that we expect to have out later this year.
Hello William, Thank you for reaching out. We offer the gasket and is part# 420-391. Please reach out to our customer service team at customerservice@rekluse.com if we can assist any further. Thank you again and have a great summer.
Hello William, we apologize for not getting you an answer. Please reach out to our international team at Internationalsales@rekluse.com if we can assist any further. Thank you! Reply
Hi there, our partner in the UK is CI Sport and they can assist you with getting a clutch. You can reach them at 01372 378000 or SALES@CISPORT.CO.UK. Their website is WWW.CISPORT.CO.UK
Hi there, thank you for reaching out. RadiusX for the R1200GS will not be available until after the first of the year. Thank you for your interest in our products!
It would be really nice is you told us why you are installing this clutch. I mean, what is it, what is special about it and why fit it anyway. It’s a multi plate clutch!………. explanation was obviously missed.
Nice! All I need now is just buying a GS.
Have you already bought the clutch?? 😂
Very nice, thank you very much from Spain, I ‘ve bought this week a 1250 gs and I apreciate these tutorials.
Qué tal te fue con el embrague nuevo? Funciona diferente / mejor que el original?
I wonder how much this easy fix would cost at the dealer? Thank you so much for the efforts in making this demonstration.
A kidney.
It cost me 2,000usd to replace my old clutch kit at the BMW dealer. 😩 (R1200GS 2013)
@@alejandrosejas the clutch plates alone cost around $750 in my country. I bought a Gsa now 😁
Clutch pack in the motherland is 315€ plus about an estimated 2h of shop time. My guess would be about 600€
good video, very professionally explained. 👍
...thrilled this is now available for the R1200/50GS/A!
Very useful info fella. 👌
Looks easy. Is there a catch, something I should be aware of?
I seen a video where the guys split the bike in half whys that this is awesome
Vous avez placer des lamelles neuves (intérieurs et extérieurs) de l embrayage mécanique , et c est toujours facile avec le constructeur...BMW.. Algiers.. Merci !
My bike is a 2021 R1250 GS ADV (40 YEARS Edition). Thanks
Hello everyone . I need some help.
I placed the clutch kit in my 1200gs LC 2015 model couple days ago and I followed the instructions , torque the bolts at clutch basket 10 N and when i was ready and started the bike i heard a dance noise from the clutch basket , time to time it stops and then back again , also when im pressing the clutch lever also stops, but no problem( yet )with rest engine behavior when im riding. What sould i do ?
Good day sir, please tell me, engine Gasket how to buy it? Tks!😊
Is there an internal (engine)oil seal that should be replaced at the same time? Whats that procedure? I think BMW calls it a 'shaft-in-shaft' system
Great informative video, well done 👏 👍
Amigo, hice el procedimiento correctamente así que cuando apreté los tornillos al final, la campana giró un poco, luego después de presionar el embrague no se movió, ¿qué puede ser?
Complimenti bel video, esiste il kit con frizione centrifuga?
hello I have a BMW 1200 GS 2013 in gear changes it is very hard and noise was only the first gear now it is almost all could give me some guidance I'm Jorge from Brazil ..
Hello Maria, Thank you for the comment and watching our video. If you could e-mail our Customer Service Team they will be happy to answer any of your questions. Their e-mail is customerservice@rekluse.com. Thank you!
where do you find that gasket for 1200 LC?
Hello good day. Could you tell me where to buy the seal for the cover? Would you ship this product to Spain?
good morning! beautiful video! just one question .... how does the shock behave when removing the belt that compresses it? Thank you very much
Hello Roberto, thank you for the feedback and your question. When removing the belt, the shock will spring back from compression so use caution. Please feel free to reach out with any other questions.
maybe not quite relevant question here: can I install this system on bmw r1250rt?
Congrats, your video is excellent. By any chance does Rekluse sell the Engine Housing Gasket? I need to replace my cover for the 719 Billet but can't find the gasket part number...
Thanks
Dove si può acquistare?
Great video, very professional.
Can you tell me why they saying that to replace the clutch on the GS 1250 or 1200, that pretty much you need to separate motor? Was this in older models?
Thank you.
The older non-liquid cooled R1200GS had a dry clutch that needed the transmission and motor separated to replace it.
Hello, I live in Kuwait, where I can buy your product as there is no dealer near around.
Is this the same kit for a 2014 BMW R1200RT LC?
Nice
Are all of the disks and pressure plates marked with the appropriate millimeters?
Hello Jeff E, thank you for your response and also your interest in our products. We do not mark our plates. You would just measure the clutch pack to ensure the correct height. Hope that helps. If you need anything else, please let us know at customerservice@rekluse.com. Thank you!!
Bel lavoretto 👍
Show muito bom
Hello, great video!! Question, what is the difference between this clutch and stock??
Hi Cesar, Thank you for your question. Our TorqDrive clutch is a clutch pack replacement meaning we will be changing out the friction disks, steel drive plates and pressure plate springs. What makes our product different is our unique steel core TorqDrive frictions disks. Our disks are thinner than OEM so we can fit more into the clutch pack (12 disks instead of 8). The benefits being more torque capacity for reduced wear, reduced heat and increased power transfer capability. Clutch feel and modulation are also improved. If you have additional questions, please don't hesitate to reach out.
Rekluse Motor Sports in numbers, how much does the torque increase. Thank you
@@eddykhouzam902 it has more torque capacity, meaning it can handle more torque. it does not give you more torque.
Hi how are you ? Can you send me the chain timing marks 2017 adventure 1200 bmw
My question is, why? What advantage does this clutch pack give you over oem?
Great question. Here's a video that goes over the benefits of Rekluse TorqDrive technology-
ruclips.net/video/OsSPeEWCtyM/видео.html
For more questions you can also reach us at (208) 426-0659 8AM - 5PM MST.
My stock clutch on a GSA is going at 97K miles. What kind of life can I expect from this clutch pack?
97K is impressive. This clutch pack should reduce heat and increase life over stock. If you ride the same exact way for another 97K this clutch will last all of that and more. Generally speaking we see 2-3 times clutch pack life with our TorqDrive products. In your case this may be a stretch but would expect more life.
@@RekluseMotorSports Thanks. I'm going to give it a shot.
Is it recommended to install a Rekluse Clutch on an R1250R? I have yet seen installation Videos for Off Road bikes only. I like the idea to leave the bike in gear at a red light and go off just like that...
The TorqDrive clutch featured in this video is a manual clutch pack replacement for the BMW. We are working on a centrifugal RadiusX clutch that we expect to have out later this year.
Hi, may I asking where can found the FRONT LID gasket ? many thanks.
Hello William, Thank you for reaching out. We offer the gasket and is part# 420-391. Please reach out to our customer service team at customerservice@rekluse.com if we can assist any further. Thank you again and have a great summer.
@@RekluseMotorSports But nobody answer me ？
At email
Hello William, we apologize for not getting you an answer. Please reach out to our international team at Internationalsales@rekluse.com if we can assist any further. Thank you!
Reply
@@RekluseMotorSports Thank you for your reply, I have emailed your instructions.
"Thousands of an inch"??!! People still use this antiquated measurement? On a BMW, no less!
'Merica
In the US of course
Is this available in the UK?
Hi there, our partner in the UK is CI Sport and they can assist you with getting a clutch. You can reach them at 01372 378000 or SALES@CISPORT.CO.UK. Their website is WWW.CISPORT.CO.UK
I need RadiusX for R1200GS lc
Hi there, thank you for reaching out. RadiusX for the R1200GS will not be available until after the first of the year. Thank you for your interest in our products!
@@RekluseMotorSports IF RadiusX for R1200GS lc ready for sell. Please told me.
It would be really nice is you told us why you are installing this clutch. I mean, what is it, what is special about it and why fit it anyway. It’s a multi plate clutch!………. explanation was obviously missed.
And this is one of many reasons why I will never own a LC 1200GS
why? the ease of replacing a clutch pack?