Mr Flower: Thank you so much for sharing. I learned much from your video and plan to watch part 3. I have a volume control on my computer so I was able to easily adjust the music to suit me. It would be helpful to learn if you were brazing or silver soldering and what you used for flux. I am anxious to learn if you have any control over whether the barrels shoot in the same place. It would also be interesting to learn what caliber? Thanks again for your great video and I hope you don't get discouraged by a few comments.
Great free hand work on the mill doing the extractor but cutting it in by hand with the reamer can cause a side loading of the reamer which in turn can cause an oversize out of round chamber. Think about it...
@@roddflowergunsmithing5576 I guess you are right now that I did "think about it" . The reamer only cuts moving forward. I guess the small amount of pressure generated wouldn't cause the reamer to cut into the chamber wall. I am going to try it on my next build.
Hello Mr. Flower, my name is Matteo Milani, I am an Italian gunsmith. I am interested in viewing your number 1 video entitled Building Double Rifles but I can't find it in your RUclips channel. Could you please tell me where to find it or if possible send it to me. Thank you for its time. Greetings Matteo
Have you ever built a double gun based on a falling block action?? I ran acrossed the KOLETZKYfalling block double and i like the looks of it.i need a combo rifle/shotgun and i,am thinking that design would work well for it..12 guage and 7-30 waters or just 30-30 winchester.
Seriously, you couldn't have edited this a little better? Watching five passes over the same length of barrel is not quite engrossing. Whatever I might have learned left the station riding a long train to boredom. Good thing your strength lies in gun making.
Love it good job sir!!! Your a true gunsmith!
Mr Flower: Thank you so much for sharing. I learned much from your video and plan to watch part 3. I have a volume control on my computer so I was able to easily adjust the music to suit me. It would be helpful to learn if you were brazing or silver soldering and what you used for flux. I am anxious to learn if you have any control over whether the barrels shoot in the same place. It would also be interesting to learn what caliber? Thanks again for your great video and I hope you don't get discouraged by a few comments.
Great free hand work on the mill doing the extractor but cutting it in by hand with the reamer can cause a side loading of the reamer which in turn can cause an oversize out of round chamber. Think about it...
Never had a problem
@@roddflowergunsmithing5576 I guess you are right now that I did "think about it" . The reamer only cuts moving forward. I guess the small amount of pressure generated wouldn't cause the reamer to cut into the chamber wall. I am going to try it on my next build.
Profissional 😊
I think you make a good double.where are you located ?
Australia
Where is part one?
Hello Mr. Flower, my name is Matteo Milani, I am an Italian gunsmith. I am interested in viewing your number 1 video entitled Building Double Rifles but I can't find it in your RUclips channel. Could you please tell me where to find it or if possible send it to me. Thank you for its time. Greetings Matteo
RUclips removed it
Said it was against there there rules
Did Part 1 vanish from youtube? I can't find it on your channel.
Removed by RUclips sorry
That's too bad. Thanks for the content.
The lug/lump assembly was not shown, that is a hardest bit.
It was in part 1 but RUclips took part 1 down
❤️ super
Lovely skilled work but why on what looks like a cheap Spanish tractor?
Have you ever built a double gun based on a falling block action?? I ran acrossed the KOLETZKYfalling block double and i like the looks of it.i need a combo rifle/shotgun and i,am thinking that design would work well for it..12 guage and 7-30 waters or just 30-30 winchester.
I like the idea of the Stradivarii rifle and would like to see a double of it.
👍🏻
Test drive uncle
Mag kano mag pa reper ser
Qual é o valor de um cano pa uma espingarda. 20
Video would have been better without that annoying music
Sorry can’t listen to that obnoxious music
Seriously, you couldn't have edited this a little better? Watching five passes over the same length of barrel is not quite engrossing. Whatever I might have learned left the station riding a long train to boredom. Good thing your strength lies in gun making.
Its free
Annoying mu-zak