BMW E90 M3 Do88 OIL COOLER Upgrade!
HTML-код
- Опубликовано: 19 авг 2021
- BMW E90/E92/E93 M3 Do88 Oil Cooler Upgrade!
If you drive your BMW like I do, you are going to want to Upgrade your Oil Cooler to keep those temps where they need to be. Today, I unbox a new Do88 Oil Cooler and install it on my 2009 BMW E90 M3. This is a COMPLETE overview and Step-By-Step Install Guide so you can easily do this at home!
What You Need for this Job:
Torx Bits - amzn.to/3rXoTz9
O-Ring Picks - amzn.to/2XNBXMx
Torque Wrench (10-80 ft-lb) - amzn.to/3synGyp
🧰 Tool Kit: amzn.to/3DjhD5W
🔩Anti-Seize Used on Bolts: amzn.to/3sRTsXd
👇 Helpful 🛠 Tools I Use:
🚘 Low Profile Jack: amzn.to/3jfTyVx
🤌 Pinch Weld Jack Pads: amzn.to/2WrUI7v
3️⃣ Ton Locking Safety Jacks: amzn.to/3kq1YsJ
◾️Frame Rail Jack Stand Pads: amzn.to/3sRAYGy
🙌 My Favorite Tool: amzn.to/3mGJt5U
do88 Oil Cooler: www.do88.se/en/artiklar/bmw-m...
I bought it from here: autocouturemotoring.com/colle...
OEM BMW Parts: www.fcpeuro.com
If you'd like to support my channel, don't forget to SUBSCRIBE to @DriveItRyan and engage with me as much as possible in the comments.
Connect With Me on Social Media:
Instagram: /
Facebook: / driveitryan
Check Out My Team Channel The Slip Angle @The Slip Angle
Instagram: / slipanglemedia
Equipment I Use:
Camera - Canon Eos R6: amzn.to/3g6CfVM
Lens - RF 24-105 f/4L IS USM: amzn.to/2VaKSmf
Rode VideoMic Pro: amzn.to/346oSN4
GoPro: amzn.to/34D8PaA
Neewer GoPro Mount: amzn.to/3p8WuV3
GoPro ND Filter: amzn.to/34zSnIg
Laptop: amzn.to/2JC7rea
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting so I can continue to provide you with free content each week! 
Авто/Мото
![Sean Rii, Karyon, Sharzkii - Taungule [My Love] (Official Music Video)](http://i.ytimg.com/vi/eJoMuypbSzQ/mqdefault.jpg)
I went a little overboard with that Intro montage but I hope everyone enjoyed it! I can’t wait to shred more tires in this car 💨
Intro sick asf running from the cops😭💪🏽
Looking forward to your next cooling upgrades. Keep them coming!
Good diy vid. Thanks!
Nice content, currently waiting for my do88 oil cooler to come in. Will be installing it on my M2.
Intro alone earned a subscriber on this side 💪🏾
I still say you were running from the cops and won. You crazy guy lol, awesome intro Ryan! Exciting ass music and Ali having a blast too! Oil cooler looks nice too 👍
🤣 Hahaha thanks Bobby!!! I seriously can’t wait to get over to your neck of the woods and run some of those roads with you and the s2000. It looks beautiful over there!
@@DriveItRyan That would be rad! Im in socal.. theres some nice roads, but the best roads is bay area and north california. CT looks like it has nice roads too!
@@bobbyrios2k223 we definitely do! Mostly in northwestern CT. I’ve always wanted to do some Canyon driving though too. I’ve done it a little in a Nissan Versa rental, but it just didn’t quite hit the same 😂
@@DriveItRyan haha yeah... not quite the same, but better than nothing!
The last real M3! The intro was sick.
Thanks dude! Yeah the last drivers M3 unless they prove us otherwise. Doubtful though 😂
Do you happen to remember the part numbers from the bolts, rubber grommets and O-rings you replaced on the oil cooler? Thank you
Recently added this oil cooler and PS cooler to mine - hitting the track for first time since install - hoping for cooler running temps across the board
You have to let me know how it goes! PS cooler is up next. Hopefully it’ll help with the dreaded boiling PS fluid.
@@DriveItRyan are you recording the diy for the ps cooler? Is it as straightforward as this?
@@zoohere98259 yeah I will be. I should be diving back into this project in a week or so. The PS cooler involves removing the radiator from what I’ve read so it’s a little more involved.
@@DriveItRyan of course. Any part we need to replace while doing the job? Orings, bolts etc.? Was looking at the diagram on realoem and it seems it’s attached with nothing in between. Is it a pretty straightforward replacing the stock ps cooler, unplug and plug in the new PS? Anyhow, looking forward to a diy vid.
Damn, even the oem cooler is pretty big. Your earl must get real hot
She gets toasty! I think I need to address the brakes next but I might have to take out a mortgage to buy those 😳
Does the engine warm up take longer?
Ryan ..I guess you have a fuel station near by...?
These Cars always scare with the MPG or is it GPM..... :)
Quality install...
N x
Bahaha Gallons Per Mile is more like it 🤣 thank you Neil!
@@DriveItRyan Anytime..
Gotta give the big shout to FCP Euro Motorsports for sponsoring the Proving Grounds at Lime Rock, AKA the new and improved go-cart tract! 👍 Great video as always.
For real! Great company run by great people!
Do you have to pre fill the oil cooler before installing it or it’s not necessary? Thanks
This is a really valid question. Yes, you should pre fill the cooler but is't hardly possible the way it's positioned. Spin the starter actually without spark plugs for a minute to get at least some air out of the system and then take it slow for the first 100km. This should be enough to have the cooler bled completely. The clearances of the S65 rod bearings are so small that oil starvation is the worst you can do for this great engine
CSF of DO88 radiator coming ???
Do88 radiator coming!
Please post an update after trackday
I definitely will!
@@DriveItRyan How is the upgrade. Any noticeable difference?
@@alexanzhaer8150 I haven’t started the car yet 😂. Upgrading the power steering cooler and a few other things and we should be good to go. I’ll post an update soon! I have a track day in a couple of weeks.
@@DriveItRyan I just had a track day in Texas and temp was around 95. Car is pushing 275F oil temp towards end of session. I spanked the baby too hard. It was always 5-8.5k RPM. I am thinking do something for her.