To put bottom back, fold the seatbacks up and line up seat using the seatbelt holes as guides. Pull the seatbelt through now, you don't want to try to do this later. As you're moving the seat, your seat belt buckles may slide under so keep an eye out. When you feel like the seat is in the right position, move the seatback down so you can see the metal hook on the back that screws into the frame. This should line up or be very close to lining up. If it is not lined up for the screw you should be able to nudge the seat a little to adjust. If it was way off, you should put the seatback up and try adjusting the entire bottom again. Once its all line up, you can push down on the seat botton where the latches are and it will easily just click into place. Then screw in the metal hook and you're ready to button up the plastic pins.
Thanks for the video. Do you know if need to remove the rear seats in order to remove the rear deck (where rear speakers are). My rear deck rattles when I drive over bumps or play music loud. Was wondering what the best steps are to removing the rear deck? Thanks!
Great demo, thanks! That’s going to very helpful... Mice got in my nearly new 19 Accord. Caught the mice and found a nest of insulation in the back left corner behind and below the seat. Can’t see where the material came from so I gotta get that seat out and recon the damage...
To put bottom back, fold the seatbacks up and line up seat using the seatbelt holes as guides. Pull the seatbelt through now, you don't want to try to do this later. As you're moving the seat, your seat belt buckles may slide under so keep an eye out. When you feel like the seat is in the right position, move the seatback down so you can see the metal hook on the back that screws into the frame. This should line up or be very close to lining up. If it is not lined up for the screw you should be able to nudge the seat a little to adjust. If it was way off, you should put the seatback up and try adjusting the entire bottom again. Once its all line up, you can push down on the seat botton where the latches are and it will easily just click into place. Then screw in the metal hook and you're ready to button up the plastic pins.
Thank you so much!! How do you put it back with propoer laching?
How do you put the bottom back on properly??
Thanks for this video I'm going to finish installing the back seat covers I bought for my 2018 accord.
Niiiice🤙
By any chance do u know how to remove the driver seat and front passenger seat Honda accord touring 2020
did you figure it out?
Is it possible to remove the front seats? Been trying to find a video on that but no luck
Nice i appreciate the time u spent showing how to do this
Thank you for this! Saved me a lot of time.
This helped me a lot bro thanks 😁👍👍
I am trying to get to the antenna system plug that is apparently behind the left side of the seat. How do you remove that cushion?
Thanks for the video. Do you know if need to remove the rear seats in order to remove the rear deck (where rear speakers are). My rear deck rattles when I drive over bumps or play music loud. Was wondering what the best steps are to removing the rear deck?
Thanks!
I’m wanting to know this to
Can you do a video removing the from seats
So i took my seats off to install a sub & now it wont open when i try to use my fob. Any ideas? It opens if i open it from the inside using my key.
Im guessing the seats aren't heavy whatsoever and will not benefit if taken out for drag strip purposes?
Great demo, thanks!
That’s going to very helpful...
Mice got in my nearly new 19 Accord. Caught the mice and found a nest of insulation in the back left corner behind and below the seat. Can’t see where the material came from so I gotta get that seat out and recon the damage...
Very good job and supportive 😅thank. You
Well my POS 2018 Honda didn't work. I pulled on the lever and nothing happened. Pulled it again and it broke.
how do you remove the trunk carpet panels
How much do these seats weight? Wondering if it'll be worth it to take em out for a 1/4 mile test on track
Stupid idea
Thanks saved me money n time.
Thanks for the video was very helpful
Thank you! You rock!
Wow, I love your video!
Thanks this really helped😃😃😃😃
Thanks
Thanks!!!!
My trunk is. Caved in is there any way I can do it without that lmfao
Looks fairly simple. Now all I need is a damn drill & a toolbox 🤦🏾♀️... I was hoping I could do this with a screwdriver
Z
Thanks