Jeżeli jest to Passat B8 to mam pytanie, czy jest konieczne po wymianie świec żarowych ich adaptacja ? Niestety wymieniłem tylko trzy świece żarowe gdyż do mojego modelu w chwili obecnej nie jest dostępna ta z sensorem ciśnienia. Dodam jeszcze że w trzecim roku od nowosci auta uszkodziła się świeca na czwartym tłoku. Pozdrawiam
Is it necessary to replace all of them if you have only one plug faulty? And one more thing, do you have to erase this fault with diagnostic to get this engine check light off from dashboard? Thanks!
You don’t have to replace all of them if you know only one is faulty, but in general if one is gone the rest will follow soon, and if you go through the hassle of replacing one might as well do them all. You do have to erase the error, but you don’t need anything sophisticated, as it can be done via OBD11 or similar from AliExpress. 😉
I've only replaced one so far and after approx 1 year another one. No need to waste your money. Replacing all 4 instead 1 takes 4x longer. You also need to screw the glow plug to a correct torque as specified by manufacturer.
@@kubizdalis101 Each to their own I guess. My thought just as I said initially, why go at it 4 times, when they’ll all go soon… do it once, job done, see at it in another 5+ years. Ratchet to manufacturers torque… sensible enough not to tighten it too much to damage the thread or get it stuck. A proper ratchet would almost cost as much as taking it to a garage.
12mm for the pressure sensor, 10mm for the rest. The pressure sensor didn’t come up with a problem but was recommended to change at the same time. Many would disagree especially due to the cost of these… 😢
checked a vw manual for my 2018 passat alltrack 140Kw diesel engine, 17Nm for the regular glow plug (059963319AB). 12Nm for the pressure sensor glow plug (03L905061K).
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
Jeżeli jest to Passat B8 to mam pytanie, czy jest konieczne po wymianie świec żarowych ich adaptacja ? Niestety wymieniłem tylko trzy świece żarowe gdyż do mojego modelu w chwili obecnej nie jest dostępna ta z sensorem ciśnienia. Dodam jeszcze że w trzecim roku od nowosci auta uszkodziła się świeca na czwartym tłoku. Pozdrawiam
nice job
Nicely done. Is your passat euro 6?
Yes it is
@@DanielSarvari thanks for answering. I'm euro 5 so don't have the 3rd glow plug with the sensor.
Is it necessary to replace all of them if you have only one plug faulty? And one more thing, do you have to erase this fault with diagnostic to get this engine check light off from dashboard? Thanks!
You don’t have to replace all of them if you know only one is faulty, but in general if one is gone the rest will follow soon, and if you go through the hassle of replacing one might as well do them all.
You do have to erase the error, but you don’t need anything sophisticated, as it can be done via OBD11 or similar from AliExpress. 😉
I've only replaced one so far and after approx 1 year another one. No need to waste your money. Replacing all 4 instead 1 takes 4x longer. You also need to screw the glow plug to a correct torque as specified by manufacturer.
@@kubizdalis101 Each to their own I guess. My thought just as I said initially, why go at it 4 times, when they’ll all go soon… do it once, job done, see at it in another 5+ years.
Ratchet to manufacturers torque… sensible enough not to tighten it too much to damage the thread or get it stuck. A proper ratchet would almost cost as much as taking it to a garage.
What size socket did you use for the pressure sensor glow plug?. Also was there any signs that it was faulty?
12mm for the pressure sensor, 10mm for the rest. The pressure sensor didn’t come up with a problem but was recommended to change at the same time. Many would disagree especially due to the cost of these… 😢
better to use a small amount of engine oil to use as penetration
Question how many glow plugs needed to be the pressure sensor type.
1 pressure sensor glow plug.
I also got to change glowplug 4.
Is it that big one or what I dont understand?
No, that's a regular one, glow plug number 3 is with the pressure sensor.
@@DanielSarvari
Thankyou brother
how much time did you spend doing this?
Hi, I didn’t spend more than an hour.
That’s what she said!! 🤣..
checked a vw manual for my 2018 passat alltrack 140Kw diesel engine, 17Nm for the regular glow plug (059963319AB). 12Nm for the pressure sensor glow plug (03L905061K).
Where I can find the manual to my A3 8v?