Watch The New & Updated Setup Tutorial Video: ruclips.net/video/PmefKx4ak6M/видео.html Cloth Physics Fix For Higher FPS: ruclips.net/video/9w7STU-8jAs/видео.html If You Can't Get Past The Character Creator, Use A Starter Save: www.nexusmods.com/bloodborne/mods/120?tab=files
tried using this on the latest shadps4 some time ago. I got an insane frame boost but the game was running in slow motion. that was using an older version of lossless scaling though, I'll use a newer version and swe what happens eventually
Hard to say if it would have surpassed the Dark Souls series in sales, but no doubt it would have reaped hefty profits, in comparison to the cost and dev time to port it over.
I defeated Martyr Logarius and received the Crown of Illusions. After equipping the Crown of Illusions to trigger the cutscene, my PS4 crashed in the middle of the cutscene. Please help me!
As an avid LLS user, I can assure you that if your base frame rate is anything higher than 36 (or even 36), it is barely noticeable (and believe me, I do notice input lag fluctuations). Past 48, basically unnoticeable. And this goes for X2 and X3, I've never used X4 but it's probably close.
It is noticeable only if you switch between on and off rapidly, you can feel it but if you are getting 60fps it's gonna feel very good, playing Elden Ring like this since it's locked to 60 fps is a blessing, feels really really good
lls is goated and only like 5 bucks dude just try it. I feel like im pretty keen when it comes to being able to notice stuff like input lag but if you have your game capped to a consistent framerate then use lss then you really cant tell.
It's pretty fucking noticeable if you're trying no hit😂 but ShadPS4 already has added input lag by default anyway. Not to mention, the nature of souls games that their dodge is bind to run button, adding more latency by around 7 ms.
You should really lock your framerate with rivatuner or something to the highest fps you know you can consistently hit since the program is meant to be used at a consistent framerate, it's gonna feel and look way way worse having it uncapped and all over the place like this with such wild frametimes. And use a multiplier where the end result is the framerate cap of your display, so x2 60fps for a 120hz display, or ideally the end result after framegen being 3-4fps below your max display hz for better input lag if you have g-sync. I understand this is just a showcase but if someone wants to try the program for themselves. There are visual bugs for sure, but it's a definite improvement over 60fps until the emulator can reach higher frames natively.
@@randomguy36j98 It doesn't specifically lock the frame generated frames since rivatuner doesn't know about those, but if you lock the real frames it will effectively do that yeah since it won't generate more fake frames than the multiplier you set it to in lossless scaling at that point. You lock the frames before you apply any frame generation, which i would suggest you do in any game anyway to the max framerate that you consistently hit since it will make games much smoother and usually with much less stuttering which you can see first hand in the frametime graph in the rivatuner overlay as well. But it's even more important when you do frame generation, i'd even say a basic requirement with frame generation
@@Pheronax Hmm im no expert in using rivatuner...is the nvidia control panel able to achieve this friend? thank you so much for your detailed explanation! ^_^
@@randomguy36j98 Yeah you can lock the framerate in the nvidia control panel, it's just that rivatuner has generally been agreed to do a better job at it. But if you use "max frame rate" option in the nvidia control panel for the shadps4 program it should do the job well enough yes. Also you need to install the 60fps patch of course if you lock it to 60fps, or unlock the framerate in shadps4 if you lock it higher. The game needs to be actually outputting the framerate you are locking it to
As for being "completely" finished, impossible to say. It is however, pretty much 1 to 1 on par with the original PS version in most aspects, in some it's superior. You can play the game from start to finish already, even with a mid range PC.
@@Alex-to4iz Game breaking? None, other than the occasional crash. As for visual, the cloth physics get wanky at higher than 30fps. Other than that though, none that I've noticed, then again, I never played the original PS4 version so...
hi dude, watching your videos for a while now, i really appreciate you keeping us updated with the newest updates to the emulator. i just had a request , could you please test bloodborne on integrated graphics, more specifically intel integrated graphics, no one seem to have tested it properly on that.
Bro, how does it feel? What’s the latency like? Is the experience with double or triple the frames way better than the native stuff? At what level(frames scaling) do the controls start feeling off and it just feels weird? Does going from 120 to 240 fps look way better than sticking with just 60 fps to 120fps?
@@Leonardo-rj8ec ShadPS4 before you launch the game, lock to 60, launch the game, launch LSFG as ADMlN, you probably don't need the upscaling so disable that from LSFG (because upscaling together with Frame Generation has insane input Lag), and then select the desired Frame Generation multiplier. Even with RTX 4070, you either want Upscaling only, or Frame Generation only. Not advised to use both because of input Lag. Unless you're using LSFG for watching movies, then yes, you can use upscaling and Frame Generation together.
Bruh I don't understand why but LLS has always looked dogshit (especially around edges and corners of the screen) for me. Maybe the new versions are good ?
@@GAMESMARKING Thanks for the answer. I have another question. How do I access the DLC? Not right away but I see on some videos the name of the DLC on title screen, I don't have that so does that mean I don't have the DLC? I have the game of the year edition and force enable DLC too.
My PC is RX 480 4GB VRAM, 16 GB DDR4 and i7 6700. I can currently run it between 20 - 50 fps. With the latest updates I get usual crashes and some bugs. I think is matter of weeks that low end PCs will run BB perfectly at 30fps stables
Nvidia RTX 4080 Super 16GB VRAM, 64GB DDR4 and AMD 7900x3d. I can play it with 60 fps smoothly but I get a lot of crashes. In some areas it's unplayable because it always crashes. Played it 6 hours and got around 15 crashes. Otherwise its nice.
Ignore comment above, you should be able to run the game at 1080p and 60 fps. Are you using Diego's build? I heard it "introduced" a lot of stuttering issues lately. However, it feels better last couple of days. If the newest build still gives you a lot of trouble try the one from December 29th (last one before the issue appeared) or switch to main build.
@@stefansaric7457 Those are just the settings I've found work well for me. If he can run the game at higher stable fps and resolution, great! If not, doesn't hurt to try lowballing the settings to see if the game runs without stuttering, no? I could run the game at higher settings, but after a while, my cooling fans get almost as obnoxious as Sony fans.
@solid_snek Well, I should have said it in a different way. I will give you that. However, do you have a similar build like him? I do. And I could run the game mostly at 1080p 60 fps like two months ago (by using no cloth physics mod for better performance). Now, I have similar or better performance without using said mod. So, given that and rumors about new builds causing problems (which I mentioned above) it's unlikely that issues are caused by hardware limitations. But, of course, he can try using lower fps/resolution options. I would just try many other things before that.
@@stefansaric7457 I'm running the game on a laptop with RTX 3060, 16g ram, 6g vram. So at least memory wise, pretty close. Then again, there could be a bunch of factors I'm not aware of. Also The builds get pretty much daily updates.
@@dyaaddin2366 input lag isn't so bad as long as you have at least a stable 40 FPS. maybe LS isn't for you if you don't like the input lag, but I personally like it because it allows me to play games locked at 60 FPS at a higher FPS, like dark souls for example, or emulator games, which is nice
Watch The New & Updated Setup Tutorial Video:
ruclips.net/video/PmefKx4ak6M/видео.html
Cloth Physics Fix For Higher FPS:
ruclips.net/video/9w7STU-8jAs/видео.html
If You Can't Get Past The Character Creator, Use A Starter Save:
www.nexusmods.com/bloodborne/mods/120?tab=files
We got Bloodborne 60fps and now we got Bloodborne 240fps
Hopefully the 4K patch gets love soon then I'm all over this
The house wasn't burning, that was just dude's GPU on fire in real life.
I got the money there's no excuse left for me not to play bloodborne in 60 fps
@@b9l_onion758 money?
Good morning brother,
Do you know when the vertex explosion mod won't be needed?
I understand the character editor is a pita.
It's still needed
tried using this on the latest shadps4 some time ago. I got an insane frame boost but the game was running in slow motion. that was using an older version of lossless scaling though, I'll use a newer version and swe what happens eventually
We were crying for 60fps and now we are getting 300 lol
If bloodborne wasn't exclusive it would have way higher sales even way more than ds3,ds2,ds1 for sure
Hard to say if it would have surpassed the Dark Souls series in sales, but no doubt it would have reaped hefty profits, in comparison to the cost and dev time to port it over.
This video is strictly not recommended for viewing for sonyboys
you mean sony's femboys
We don't really have to do this.
Be better.
for real, unlike our oppressors, us humble pc masterrace titans ought not to be tarnished by the sin of arrogance
What you on bro? 😂
@@davidblaine1165 have fun with your ai generated frames then and i am a pc user myself.
I defeated Martyr Logarius and received the Crown of Illusions. After equipping the Crown of Illusions to trigger the cutscene, my PS4 crashed in the middle of the cutscene. Please help me!
Is there any news about the vertex explosions?
No. It's still there
whats the input lag like is this 100% worth getting?
As an avid LLS user, I can assure you that if your base frame rate is anything higher than 36 (or even 36), it is barely noticeable (and believe me, I do notice input lag fluctuations).
Past 48, basically unnoticeable.
And this goes for X2 and X3, I've never used X4 but it's probably close.
It is noticeable only if you switch between on and off rapidly, you can feel it but if you are getting 60fps it's gonna feel very good, playing Elden Ring like this since it's locked to 60 fps is a blessing, feels really really good
lls is goated and only like 5 bucks dude just try it. I feel like im pretty keen when it comes to being able to notice stuff like input lag but if you have your game capped to a consistent framerate then use lss then you really cant tell.
It's pretty fucking noticeable if you're trying no hit😂 but ShadPS4 already has added input lag by default anyway. Not to mention, the nature of souls games that their dodge is bind to run button, adding more latency by around 7 ms.
@@amruzaky4939
That's good to point out. I didn't know about ShadPS4's added latency.
It also depends on the refresh rate you're playing with.
What still needs to be fixed so that when I play Bloodborne I don't need to download any mods?
waiting gtx 1060 version
keep waiting
friend, please share the overlay for rivatuner or fps monitor
Does anyone know why does the sprint slow down a lot when you play above 100 fps?
How do you make it so that the fps using lossless scaling also show up on afterburner?
So is it fine yet with i7 7th Gen with 16gb ram and gtx 1050 ti 4gb vram?
You should really lock your framerate with rivatuner or something to the highest fps you know you can consistently hit since the program is meant to be used at a consistent framerate, it's gonna feel and look way way worse having it uncapped and all over the place like this with such wild frametimes. And use a multiplier where the end result is the framerate cap of your display, so x2 60fps for a 120hz display, or ideally the end result after framegen being 3-4fps below your max display hz for better input lag if you have g-sync. I understand this is just a showcase but if someone wants to try the program for themselves. There are visual bugs for sure, but it's a definite improvement over 60fps until the emulator can reach higher frames natively.
frame generated -fps can be locked via rivatuner??
@@randomguy36j98 It doesn't specifically lock the frame generated frames since rivatuner doesn't know about those, but if you lock the real frames it will effectively do that yeah since it won't generate more fake frames than the multiplier you set it to in lossless scaling at that point. You lock the frames before you apply any frame generation, which i would suggest you do in any game anyway to the max framerate that you consistently hit since it will make games much smoother and usually with much less stuttering which you can see first hand in the frametime graph in the rivatuner overlay as well. But it's even more important when you do frame generation, i'd even say a basic requirement with frame generation
@@Pheronax Hmm im no expert in using rivatuner...is the nvidia control panel able to achieve this friend? thank you so much for your detailed explanation! ^_^
@@randomguy36j98 Yeah you can lock the framerate in the nvidia control panel, it's just that rivatuner has generally been agreed to do a better job at it. But if you use "max frame rate" option in the nvidia control panel for the shadps4 program it should do the job well enough yes.
Also you need to install the 60fps patch of course if you lock it to 60fps, or unlock the framerate in shadps4 if you lock it higher. The game needs to be actually outputting the framerate you are locking it to
Nope i just let it go wild, feels fine.
Hi there, may someone tell how much progress has been done?, like, when this proyect is going to be finish?.
Thanks beforehand for the answers.
As for being "completely" finished, impossible to say. It is however, pretty much 1 to 1 on par with the original PS version in most aspects, in some it's superior. You can play the game from start to finish already, even with a mid range PC.
@solid_snek Thanks for the answer🙏🏻🙏🏻
@solid_snek aren't there any game breaking bugs? Visual bugs?
@@Alex-to4iz Game breaking? None, other than the occasional crash. As for visual, the cloth physics get wanky at higher than 30fps. Other than that though, none that I've noticed, then again, I never played the original PS4 version so...
what mod is that where u can resurrect bosses?
Bloodborne Enhanced
hi dude, watching your videos for a while now, i really appreciate you keeping us updated with the newest updates to the emulator. i just had a request , could you please test bloodborne on integrated graphics, more specifically intel integrated graphics, no one seem to have tested it properly on that.
Sorry bro my pc is amd based. I don't have intel
@@GAMESMARKING okay thanks, but could you do it instead an on amd integrated graphics if you by any chance have that available🙂
Bro, how does it feel? What’s the latency like? Is the experience with double or triple the frames way better than the native stuff? At what level(frames scaling) do the controls start feeling off and it just feels weird? Does going from 120 to 240 fps look way better than sticking with just 60 fps to 120fps?
Oh look, your 4070 become 5090 😮😮😮
Wheb online mode like demona souls ps3 emulator?
you must Lock the FPS to use LSFG.
Otherwise it will overwhelm the GPU itself
need to lock in bloodborne or LS ?
@@Leonardo-rj8ec ShadPS4 before you launch the game, lock to 60, launch the game, launch LSFG as ADMlN, you probably don't need the upscaling so disable that from LSFG (because upscaling together with Frame Generation has insane input Lag), and then select the desired Frame Generation multiplier.
Even with RTX 4070, you either want Upscaling only, or Frame Generation only. Not advised to use both because of input Lag.
Unless you're using LSFG for watching movies, then yes, you can use upscaling and Frame Generation together.
@@niezzayt3809 How do you lock the FPS on shad? Vblank divider to 1?
Yes
@@Alex-kq4tn using Rivertune to lock FPS
would u get banned if u wanted to stream it on twitch?
if you don't show how to install it or where to find the game files and patch then i don't think so.
How did you enable Frame Gen?
In the lossless scaling app
Bruh I don't understand why but LLS has always looked dogshit (especially around edges and corners of the screen) for me. Maybe the new versions are good ?
I use it with Fromsoft games specifically, and if you're above 60FPS ot doesn't have all that artifacting
@ca9inec0mic58 Hmm maybe I should try it again
They "fixed" it on the last version. I've tested Elden Ring and The Witcher 3 on 30/60. I'd say it is 90% fixed.
Any noticeable graphical artifacts with lossless scaling? What about character ghosting?
The ghosting on character is much less.
Didn't notice till x6 frame gen. After that it was pretty noticable
Does it work on AMD GPUs now? I started and used some item and it crashed the very moment. Is it even playable yet?
Amd gpus fixed already. Download the newest main branch
@@GAMESMARKING Thanks for the answer. I have another question. How do I access the DLC? Not right away but I see on some videos the name of the DLC on title screen, I don't have that so does that mean I don't have the DLC? I have the game of the year edition and force enable DLC too.
bro can it work on 4gb graphic card pls tell like can it give like atleast 30 fps
Yes
Is there lots of input lag? On which modes it starts to be noticable on controller?
After x6 frame gen
@@GAMESMARKINGelaborate? I’m considering buying this for Bloodborne lol, like on x2 or x3, you felt nothing?
Nice video! could you please try infamous second son? thanks in advance, cheers!
how do you use the frame gen? is it built in the emulator? or is it a mod?
An app called lossless scaling
Bloodborne was soooo good
I have some questions if u like to answer i would be be thanful
1 how stable is it
2 is it buggy
3 if its bad rn how bad is it or how good is it
My PC is RX 480 4GB VRAM, 16 GB DDR4 and i7 6700. I can currently run it between 20 - 50 fps. With the latest updates I get usual crashes and some bugs. I think is matter of weeks that low end PCs will run BB perfectly at 30fps stables
@@SuperDjtornado i kinda have a high end pc,i just wonder about textures and bugs
@ there’s no major visual bugs despite vertex explosions. For high end pc is fully playable
@@SuperDjtornado thats good to hear ty dude
Nvidia RTX 4080 Super 16GB VRAM, 64GB DDR4 and AMD 7900x3d. I can play it with 60 fps smoothly but I get a lot of crashes. In some areas it's unplayable because it always crashes. Played it 6 hours and got around 15 crashes. Otherwise its nice.
Hi! Will it be necessary to also install the mods in the future?
Probably not. But why does it matter? Its not hard to install them
@@balintszeder6455 It's just to understand if what he is doing affects the same things that the mods enhances. It's just curiosity.
can play with mouse and keyboard or only ps5 controller?
Both are supported
where can i download btw
any noticeable input lag?
Not until fps drops to less than 50
how did it feel playing at 3x and 4x and was it smooth?
Yes very
plss how to fix game stuter i have 16 gb ran with ryzen 5 5600 and rx 6600 xt
Set Vblank divider to 1, disable Vsync, use 30fps patch and use either 720p or 900p patch.
Also, I'm using Diego's latest Full-BB build.
Ignore comment above, you should be able to run the game at 1080p and 60 fps.
Are you using Diego's build? I heard it "introduced" a lot of stuttering issues lately. However, it feels better last couple of days. If the newest build still gives you a lot of trouble try the one from December 29th (last one before the issue appeared) or switch to main build.
@@stefansaric7457 Those are just the settings I've found work well for me. If he can run the game at higher stable fps and resolution, great! If not, doesn't hurt to try lowballing the settings to see if the game runs without stuttering, no?
I could run the game at higher settings, but after a while, my cooling fans get almost as obnoxious as Sony fans.
@solid_snek Well, I should have said it in a different way. I will give you that.
However, do you have a similar build like him? I do. And I could run the game mostly at 1080p 60 fps like two months ago (by using no cloth physics mod for better performance). Now, I have similar or better performance without using said mod. So, given that and rumors about new builds causing problems (which I mentioned above) it's unlikely that issues are caused by hardware limitations. But, of course, he can try using lower fps/resolution options. I would just try many other things before that.
@@stefansaric7457 I'm running the game on a laptop with RTX 3060, 16g ram, 6g vram. So at least memory wise, pretty close. Then again, there could be a bunch of factors I'm not aware of.
Also The builds get pretty much daily updates.
does anyone know a mod for first person ???
I think bloodborne will have a similar culture as doom... Never stopping to run bloodborne at 1000fps and keep improving hahahaha
so what does lossless scaling do ?
It's like dlss and fsr. Also have frame gen which works with all gpus
how can i unock fps?
disable v-sync
Hello does this emulator need cpu better than gpu?
No
is it actually smoother or only fake fps numbers ?
input lag is almost the same, but when you move around your camera the game is much smoother
@@lifeandeaxth i just tried it, it is smooth but input lag makes it unplayable
@@dyaaddin2366 input lag isn't so bad as long as you have at least a stable 40 FPS. maybe LS isn't for you if you don't like the input lag, but I personally like it because it allows me to play games locked at 60 FPS at a higher FPS, like dark souls for example, or emulator games, which is nice
Sniper Elite 5?)
4070 with 20x is better then 5090 with dlss 4 🤫😎
Shad scaling
Chad scaling
WOAH
Why do I not have version 3.0 when I have bought that stupid software of steam...
Did you update it. Verify files integrity
What's new exactly?
Exept the 200+Fps😮
Nothing new. Just tested the new lossless scaling 3.0 in this emulator
He's using frame generation, so he's getting like 2-3x as many frames
will be playable in 6 months
@@rashestoak7454 Now it is playable
It's playable now if you want, I was gonna download it but my wifi been shitty for the past 2 weeks
4070 is FASTER THAN A 5090 and FASTER THAN PS6 !
PS4 GOD OF WAR 3❤❤❤
playable with mouse and keyboard???
yes
OH NONONONO PS BROS
geg
First
Already complete the game + DLC.
Oh boy, game is so overrated.
"My disappointment is immeasurable and my day is ruined"