1:200 RMS Titanic Build Video 11
HTML-код
- Опубликовано: 14 янв 2025
- ****** UPDATE**********
If you wish to purchase these products, you have to have an established Facebook account and join their group. Because of recent messages I've received from individuals trying to join the group and simply getting banned, and because of the unorthodox method by which they have you purchase these products through Facebook, I can no longer in good conscience, recommend them.
I have personally been banned from their group, as well, for being publicly critical of their ordering process. I did this in the hopes that they would create a website, streamline their purchasing process, and make these awesome items accessible to everyone. This hobby is supposed to be fun and enjoyable for everyone around the world.
I will not promote a product or products that are only accessible to a tiny group of select individuals.
*****************************
This episode is mostly about the anchor chain assemblies and some other items on the forecastle. I had a little trouble with ScaleDecks wooden deck, but, I'm going to make it work.
Music is by: The Midwestern
You can get it here: themidwesternb...
ScaleDecks: scaledecks.com/
We are on Instagram. Just search "The MidWest Model Shop". You'll recognize the icon.
Un grand merci à vous, je monte le titanic trumpeter 1/200 et j'adore vos explications. Vous expliquez pas à pas et c'est génial. Merci pour tout. French fan
Good video, really enjoyed watching it. Very informative.
Great build. I really liked the look of the pintos photo etch set. But All the aftermarket kits will Make a massive difference to this kit, great work
Thanks for the info on the anchors. I am surprised about the Scale Decks issue, this is the first I have heard about that. In thinking of a solution for this, and I do agree with you in attempting a fix, however, the amount of rework is a little beyond the time and effort to correct it. It is a cascading set of items to fix. Each bollard, housing, and windlass have a specific border and each will have to adjusted. In the long run I would contact John at Scale Decks and request a new section. Enjoy your up coming Thanks Giving.
Thank you for these amazing comparisons, and for the how to's. So amazingly helpful!
Great looking Titanic, wish I had time to build one like you. I find your videos great and very informative. I like to find someone build one for me, it would look great in my Titanic collection.
Great video on the anchor furniture etc. Great for me to see this all going on long before I get there! Glad the KA comes out well too! Now the waterway on the forecastle can be done by cutting it away as you suggested. if possible keep that for reattachment later when you have filled in the gap. A while back I can remember seeing something that suggested that the forecastle waterway only started part way down each side from the bow. I have looked everywhere to try and find out a bit more about this! No luck so far!
I am surprised that Scale Decks didn't contact you! They watch video of people using their products to see how they are doing! I got contacted once after one of my videos! I know what you mean about wanting to figure it out! I have done that too! To bad the Ponto's was to short! I actually like it better. There is simthing about painted metal apposed to painted plastic or 3d! It looks more real! Can't really go wrong based on the size! Lol great work bud!
Yeah you’re right. Painted metal ALWAYS looks like…. Painted metal 🤷🏻♂️ And that’s as close to the real thing as we can get!
Awesome job Ben! Sorry about the lineament issues, that sucks.
Impressive work. Enjoyed every minute of it. Happy Thanksgiving.
Thank you guys for another wonderful video on the Titanic! I wish you a very wonderful Thanksgiving and as always, I'm looking forward to the next video!
so fun to see this develop!
Great tips Ben. Your explanation of Scale Decks being off might be way I had trouble. I was working on a 1/350 and a lot of the deck fitting didn't line up.Then again it might have been me, first wood deck did. Thanks for the video.
Awesome video as always 😊 I love the Titanic facts🤗
Have yourselves a great Christmas !
This thing will be amazing when finally done.
Great video!
The texture on the 3d print might be layer lines, it's hard to print an object with multiple flat surfaces with out one side being at the wrong orientation to hide them.
Amazing
I have two massive kits of my own on the way. Both are 1/72 UBoats. One is the Revell Type IX, and the other is the Das Werk U9. Both are over three feet long.
Hey guys, just realised that there is a PE parts for the forecastle waterways included in the KA kit at sheet Q parts 18 and 19. Also sheet R parts R13 and R14. This may help you avoid a whole load of grief with the deck woodwork cutting!!! See page 16 (top left) picture of the KA placement instructions!! 😉
I’m going to check this out! Thank you!
There was an 2 update sets for these and other missing parts from the etch from KA, Gene has them for the those who didn’t have them in the US
Ben, I was curious as to how you removed the raised kit parts from that fore-deck thingie, whatever you call it. You did a masterful job flush-cutting everything off but I was hoping to see how you went about it.
Hey Kip! I just took my side cutters and laid them flush on the deck and snipped the parts off. Then I took a rounded exacto blade to scrape off the rest. Finally, if necessary, I sanded the area smooth. You can do it. Just pick a part near the edge to start with. 👍👍
Good luck in your intended patch of the deck. Don’t forget that resin is bad to breathe in so face masks are a minimum when using. I have the 3D pieces as well as all the other aftermarket stuff. My Q is when placed beside the KA part at the end with their chain installed it looks like there is a whole link going to the hawsepipe whereas the 3D part looks like a 1/2 printed link. What do you propose as a fix for this to extend into the hawsepipe?
So there’s actually a full link going into the hawse pipe. I just accidentally cut mine in half when removing it from the print supports. But I was okay with this because I realized I may have to move the whole assembly. If you have the whole link, then you’re committed to putting a hole in the deck. When it’s all painted up, I doubt anyone will notice the half link.
@@TheMidwestModelShop great thanks for the info I haven’t looked at mine in a while, but something to be wary of
👍
Way cool😎👍❤👊😁😎Hollaaaaa Hollaaaaa
Everything is looking pretty good. Sorry to hear that you had a problem with the scale decks. I guess once in a while you may get a lemon. I think this is the case with that. My concern would be, is this going to be an issue down the road, as you install the remaining deck pieces. I hope not. Have you done a test fit with your other pieces of the deck? Just curious, I would be concerned myself if there is going to be an ongoing problem here.
Well, this definitely means I have to establish a centerline down the deck and place pieces on that line. I may end up cutting parts out and using parts of the non upgrade deck to fix things. Or not. It’s still an evolving situation.
Ben what kind of airbrush are you using?
It’s an Iwata, I believe. Double Action. I don’t remember the model number, off the top of my head. It’s the one the carry at Hobby Lobby.
How do you plan to keep the dust off these models when you finish them?
They go in cases.
HI Ben sorry keep bothering you but I've just started making the model of the 1/200 titanic I've got to wooden deck to it but what's the yellow part for. do I put this on first and then the wooden deck on top
I think you’ll need to be a little more specific about what the “yellow” part is, please.
I searched on FB for China parts but I found nothing. Is the page still up??
Yes it is. Make sure you check the correct tab in the search window. Sometimes FB messes up the search.
I can confirm the KA anchor chains do move, but cut them off carefully!
Yes, I was really pleased with how they turned out.
What about soaking it in hot water and then bending seen that done before
Talking about the part 22 mins in
That’s totally an option
Where did you get the Pontos upgrades?
They came from Trumpeter.
I tried to join that China 3D print group and apparently didn't know the exact answers they wanted to the 3 questions and I think they blocked me. That's no way to do business. Anyway, my forecastle is also slightly shifted but not as badly as yours.
I shared your info to the admins of that group. Maybe give it a day a try again. Sorry you didn’t have any luck.
@@TheMidwestModelShop Thank you !
@@TheMidwestModelShop No good. I'm a 3D modeler so I guess I'll have to make my own. Thank you and I really enjoy your content !
Famous last words: "....I don't know what's wrong with you."