Nissan 300zx Turn signals / AC fixed

EDIT: The same problem returned, I took apart the fusebox under drivers side kick plate again. tested the Ignition relay and saw that one side.of the contacts was barely making, still had continuity but with resistance. I think this was enough to cause the problems. with a jumper wire across the terminals everything works just fine. Hope this helps.
As the video explains i was having problems with my turn signals and autp A/C controls not working. i go through some of the steps involved and what to test, if you have any questions let me know!
Here is a link to an online FSM 300zx-twinturbo.com/cgi-bin/m...

[@petesmith3186]

The ending was the best. Thats how I feel about the community!

[@jordysantos4843]

I did too and so were my dash lights. First I checked the fuses with a test light and found the turn signal fuse was blown and also the accessory light fuse. Went to autozone and bought a couple 10A fuses. If the fuses are good I would check the switches next.

[@sleepwalker29]

My problem was the turn signal switch on the steering columb. My brights stayed on when I had it on dim, and my signals didn't work. I played with the switch for about a hour and it all works now. I think the copper gets corroded on the switch causing bad connection. As you play with it the corrossion wears off. Mine was sitting for 10 years.

[@volcome5454]

I'm having this same exact issue, thank you so much for posting this!

[@michaelvillella3573]

hopefully it helps! let me know how it goes.

[@RobbyGalvez]

Thank you for uploading this bro. Its definitely giving me some leads on what could be my problems. Do you have a link to the wiring schematics you used so I could run these tests as well? Much appreciated

[@michaelvillella3573]

No problem! hopefully you get it fixed, try this 300zx-twinturbo.com/cgi-bin/manual.cgi and look under combination switch and instrument cluster under (EL) wiring diagrams. this is the FSM just scanned and uploaded to a website.

[@RobbyGalvez]

Thank you so much bro this will make my life a whole lot easier

[@AdDiCtEdZ]

@@michaelvillella3573 cant open that link

[@michaelvillella3573]

@@AdDiCtEdZ seems to still work for me 🤔

[@gabrielturbskies1440]

Have this same problem with my 91 240sx exactly the same