Это видео недоступно.
Сожалеем об этом.
HOW I FIXED iPHONE 6 TOUCH DISEASE (Has been FLAWLESS for 6 WEEKS NOW)
HTML-код
- Опубликовано: 26 дек 2016
- After some research on RUclips, I could not find a solution that worked for me to fix the iPhone 6 touch disease. The only apparent solution was to replace the touch IC, however I decided to try with my own solution and it has worked flawlessly for the past 6 weeks.
Soldering Iron:
amzn.to/2nvMfij
iPhone Tool Set:
amzn.to/2paAvSI
iPhone 6 Logic board removal:
www.ifixit.com/Guide/iPhone+6...
Music:
/ itro-kontinuum-alive-n...
NCS: Music without limitations. | artist(s) @Itro, @Kontinuum
Guys and girls, try this at your own risk
HI does this work with IPHONE 6S as well ?
@@devyud5719 I thought apple solved the issue on the 6s
Lucas Guanes I have an iPhone 6s and it will open thing and click on random things on my iPhone
TacoBird76 7 had the problem better and took care of it
Conor Mills oh thanks but my phone is fine now 👍
Wow..it worked like magic. Thank you Lucas. When i approached two mobile phone service centers, they both told me to replace my iphone screen. But then I told one of them to try the method you showed in above video and it worked.
The other iPhone I replaced the LCD and it worked. I wanna try this other one I bought recently which has a similar problem after buying it
Tried it and it worked. The only difference is I did it also to the touch transmitter chip above the touchscreen controller chip in your video, so I hit both chips.
100% this is perfect fix..i done it yesterday after watching video and phone is perfect since..i was freezing every 2 seconds and pressing buttons by itself and now its working like new 👌👌😎 thank you
nice
Followed step by step and took care to make sure and get the heat to evenly heat up the chip and it seems to have worked. Still testing so will update once some time has passed. Also, once I finished heating it, I placed a piece of electrical tape over the ic chips just to keep them in place. I know it'ñ might not be a permanent fix, but if it works for a little while longer I'll be happy! Thanks for the video!
any update Sir? it's been 5 year lol but during that time is a long temporary fix?
Hey - I was skeptical but had nothing to lose by attempting this fix. Lo and behold..it worked. My Iphone 6 is now working. Hopefully will stay that way until IPhone 8 is out. Thx
Wayne G is it still working?
Just watched another video like this it fixed my 6 ! Take your time do it right it will work ! Cost zero dollars took me 3 hrs tho lol!
Thanks for the video. Well I just did your method and the electrical tape together. Phone powered up and screen is working so far. I will check back for time to time on the status, thanks again.
good, hope it stays that way
Working till now?reply yes or noo or problems too plz
I have had this touchscreen disease from past 2 years, did this and now it's working like a charm. Thanks, @Lucas Guanes
Nice!
Just want to say, Thank you so much for this video!! My phone was getting unusable it was happening all the time. I followed this vid exactly, 30 sec, 3 times, phone has been perfect for almost 3 weeks now!! I waited some time before writing this to make sure and issue hasn't happened at all since. This is the REAL fix. The disassembly instructions you linked are great too.
Had the exact same issue. Will try this now.
Ofc. my iphone is just lying arround these days.
After this happened to my 2 year old iphone 6plus *(A 1000$ phone!!!)* I immediately switched to Android.
At this pricepoint this is simply unacceptable. I have an entire graveyard of apple products. all died bc. of simple mechanical engineering issues that i could have fixed as an undergrad 1 year at colledge! They either have 0 good mechanical engineers, or they don't listen to them.
My guess is that design department and management always gets the upper hand in the meetings... screw apple!
If you want to know what killed the other products:
Product - Cause of death - how long did it last
Macbook pro 2011 - Overheating - 4.5 years
I pad mini 2012 - Grey screen - 2 years (to the week)
Mac Pro 2013 - Overheating - 2.5 years
I phone 6 plus - Bendgate - 2 years
Which was the final straw!
If you follow the timeline, you'll have noticed that almost all my devices gave out ~ 2016... Which extra sucked!
Never ever again buy from apple. You have been warned :)
Ofc. i also had the apple tv 'blinking light for ever' issue after 2 years and all apple crap cables only lasted 1 year, dead earphones and a lot of other small overpriced shit that died randomly, but that's not my main concern.
I now have switched mostly to ASUS, Acer and Dell. Can recommend. Especially the Zenphone is fast and has 0 issues!
Thanks I did follow all your steps and it works
My phone it back to life
This is what I'm talking about brother!
How long is the interval meant to be? 10-15 seconds or straight away? thanks
Thanks bro
it Works
respect from morocco
I did this method, and also the tape method but it hasnt fixed my issue, which is half of the display doesnt respond to touch and a few other small areas as well, is this maybe the screen and not this chip?
Hi Bro, does this solution still work till today? I have tried other solutions they only worked for some days and then the problem came back. Im refering to the solution where I have to put an electric tape on the IC.
nice i fixed it
my hands were shivering while doing this
Hey man, thanks for this trick, can I just used a Hair Dryer instead of the Soldering iron?
Just finished and it seems to be fixed! I'll check back in a couple weeks to let ya know how it's holding up!
Any updates on your iPhone Ian?
It quit an hour or so later. I wound up follow other advise to fold up a piece of tape and stick it in there to keep constant pressure and that’s solved the problem for me. I know it’s not a permanent fix but it will hold me over for a while until I feel like getting a new phone.
Thanks men you saved my iPhone 😊👍
Cool!
I took the motherboard out, put a piece of electrical tape on the correct chip, placed a finger on the chip while gently bending the motherboard back to being straight again and I haven't had any issues yet. Take a look at the straightness of the little brackets that hold the mobo and adjust as needed. Did that 4 days ago and its good as new.
Allen Blumenauer just put tape on it without heat!!!??? and its working for long time ???!
thanks bro for the solution but i did that and after remounting the board the keeps on rebooting,ends on the iphone logo and stars up again.what went wrong
Thanks bro. It worked. I purchased a solder gun for only 5 bucks. today my phone was irresponsive to all touch as for months it was acting up until it had no response. now it works!
Awesome!
Can confirm that this worked. Will report back on how long this fix lasts
Calvin Lo so how’s it been
Thanks Lucas for this video. I just done it and my phone works like a charm now!
that's what I love to hear
Just tried this and it seem to be working. Thanks
Hey I just wanna know did you do it yourself
Is it possible to have this problem if your iPhone 6 plus doesn't display gray line ?
It workedd !!! Thank YOUUu!!!
nice!
Lucas I am having iPhone 6 and I am having this issue ..so by heating the IC ..is the solution for permanent or temporary
this actually works👌😂 thank you👌🥳
Wow Lucas this really fixed it. I almost didn't try it because it seemed like a long shot since touch disease is usually associated with a gray bar along the top, but this phone didn't have that. Also when I opened it up I saw some spots that looked kind of overheated/burned, which I thought might be a bigger issue. I found a spot of gold solder or something that normally has a little thermal sticker on it and the sticker had been smudged away and off of it too. I put that back and I proceeded with the soldering trick even though my mind had been trying to tell me it was just that sticker. It might have been, but doubtful. Your trick saved this phone and now my Mom can use it to save money by switching to Xfinity Mobile! Thank you. Also - since this worked for me I went ahead and liked and subscribed. You earned it!
dude, that makes me real happy
The pressure you applied "fixed" the fracture in the solder joint. More a less you could have just pushed your finger on it and accomplished the same thing. If the solder under that chip had gotten hot enough to melt they pressure you applied would have pushed the BGA solder out and bridged all the connections under that IC.
Get your phone fixed correctly. I6 cumulus most of the time is the issue. i6+ Meson is usually the issue and more specifically a faulty pad under Meson.
i had this problem and stumbled upon this video, as you mentioned i just pressed with a rubber to do an even pressure, the touch was not working at all, and now all is back working. Lets see how long it will take.
they do not agree, the heat melts slightly the pond and brings it back to the initial situation, in fact you can smell the dissolved tin when applying this guide, it also produces a lot of heat on the chip, the same as is achieved with a thermally hot air gun
Well, i havent applyed heat to it, just pressure, and it made it work well for a month or so, then i came back to the same situation (as i predicted it would happen), so what i did was press the phone (without opening it) untill it stop doing the problem, then i took it to a store that pay back for used iphones when you buy a new iphone and bought an iphone 7 with 3 years of extra guarantee.
And for all the research i did after, i discovered that there is no fix for the problem, as after the first bend the phone gets more and more pliable and fragile. It is an structural thing!
actually you should remove the old chip and apply a new hot air welding it, so repair is 100% conclusive
i fully agree with you that this is the best way to fix, but i think that the problem will come back sooner or later as the phone will bend more and more.
Great tip man. Good job. Tks
Hi 👋 how will I fix my Iphone working on its own ?
I cannot believe this worked for me. It took me about 20 minutes, but I followed the steps exactly and it really seems remedied now. Wow. Thank you for being informative and quick to the point. This is what RUclips is all about. Time will tell if it holds up. :)
Silver Moon Gaming still working? :)
This so amazing. I recommend this tutorial on how t on fix you touch IC. Thank you lucas guanes 🙏🏻😊
Nice!
another thing you can do is put a sim card over the screen connections under the shield. it worked for me
@JakeMoranIsLame must i make a video pulling appart my 6 plus? i've literally rebuilt the entire phone.
Hi, I have this problem too, and it happened after I replaced my battery. To do that I disconnected the "connectors" (the 4 connectors/cables) so that I could take off the screen to properly deal with the battery. Judging from this helpful video, I realized that the chips that are not properly making contact and causing the "touch disease" are in fact placed on the logic board DIRECTLY BENEATH the area where the connectors are connected to the logic board. Thus, my suggestion/question is that disconnecting and later connecting the connectors may "cause" the issue in the first place (by pulling up the connectors and/or pushing the connectors back on later) - does this make sense?
Nice
my iphone(7plus) it has same problem it works properly but suddenly not working after lock and open.. it work propely....
how can i fix it?????
If this issue is so common like this, why Apple won't do a recall?
cuz they dont want to admit that they fucked up
Because Apple is a dick company.
Because they can make more money by you throwijg away the iphone 6 you bought and buying a better phone
Because it only happens if you drop your phone a couple of times, so it’s ‘not Apple’s fault’
they just bother about making money
My iPhone will make calls are text on its own?
Thank you so much!!!! The fix worked and my phone is now working great!
I love it!
can i ask a help, ive been using my phone for almost 1yr and then my back cam got broken sa i need to change a new back then after i fix it after 1day my phone sometimes got freeze and sometimes i can touch it can u know what is the problem of this? my lcd is fine
Same
Thanks! Helpful video; I took my phone out of the case and squeezed it pretty hard at the spot the chip sits. This seemed to fix it just fine. I wanted to share this for people to try first before taking your phone apart. Cheers!
pretty much! I just took my phone out of the case and pressed it between both hands pretty firmly, held it for a few seconds and it worked. I've had to do it again since last month but it's way easier than taking apart. I'm also just buying time to get a new phone since I'm due for an upgrade.
is that all you did to make it work? cus if yes i would do that 😔😔
Gawd! I tried this and it worked😭
omg thank uuu it worked!!!!
@@nashslogbook9172 keep me updated 😭 I wanna know how often you do it
Sweet! Un-RIP’d this iPhone 6+ cheers man!
love this bro!
Well I tried. Let see if it holds up.
Tried already and successful so far. I think an important point is you need to apply pressure right after you remove the heat, so that the metal set attaching the IC to the board
Thanks for the addition
okay its happening to my iphone 6s and its just doing everything by its own like going to Alarm and setting a timer for 2 Hours, or Opening the Calendar or the Weather, i have no idea what to do so i just turned it off til its gonna get a Reset
my screen touch is goin crazy.
What if you don’t have any of the tools required where would you get them and how much would they cost
£18 is enough for a OK temp controlled iron. Irons can be bought cheaper but t.c ones are better. Search 936 solder station on the bay
everything can be bought from ebay really cheap
Just so everyone knows, this does in fact work. I just finished putting mine back together and this fixed it right up.
Thanks for this vid! Have not tried it yet... possible to post a LINK to the solder tool you purchased? Also, why do you only touch the chip with the screw? Does the aluminum foil have to 'melt' or does it just end up sticking to the chip and that's when you know it's good to go?
I believe having a very tight protective case possibly contributes to the development of this issue (and when the case is removed it seems to occur less)
I believe removing the metal plate over connectors helped me out a bit, and also helped (more quickly) to get it to stop flickering. HOWEVER, what helped even more, was adding one piece of electrical tape folder and in-between connectors and plate. When I did this I was only able to screw in 2 of the screws.. but I don't care because this helped much more (less flicker, easier to stop it when it occurs, etc., and only requires a slight pressure on the EDGE of phone near the chip).
Also, when you're twisting phone to get the Flicker to stop, you may see the grey bar disappear.... but the Touch still doesn't work.... and I've noticed that sometimes you need to then hit the power-button (upper right side) and use the thumb-login or dial pad to log in to the phone, and then it works for whatever reason.
If you don't do this method, or send in for micro-soldering repair, this flicker will not stop... sorry to say. I've been dealing with this for about 1 year, and it has it's good moments, but lately it has gotten much worse.
While I had it open, I ended up replacing the battery.... BE CAREFUL DOING THIS.... make sure you SLOWLY remove the sticky/tabs, because if they snap too soon, you'll have the adhesive beneath the battery and you'll have to PRY it out and this will be very difficult and dangerous (potential ACID if you cut into the battery). Also, purchase your adhesive tape FIRST, because you will need this and your replacement battery probably won't arrive with the strips.
hey, I bought a really cheap soldering iron like this one: goo.gl/YJ1QEQ
The aluminum is just there to transfer the heat more evenly on the chip surface thats all. It is the solder underneath the chip that melts but you can't see it.
Thanks, Lucas! I think I understand... are you saying that once you apply the heat 3 times at 30 seconds each, you then just remove the aluminum piece and assume the solder melted and fixed the issue... and then put it all back together to test it out?
Also, why do you use the screw on the solder tool? is that to apply less heat to the chip?
did You not remove the IC at all as I understood ?!
No removal, just applied heat
Great !
And i finally found good video that actually helps!
well done Lucas!
AllTheWay, happy to hear that
Little update.
It runs 11hrs with no problems :)
Still good :D
i recommand this to everyone
Hello
1:20
After doing this the screen on my iPhone started working again, but now after 2 weeks the screen no longer works at all, It is turned on and my computer detects the iPhone but the phone doesn't do anything not even vibrate or make noise when I call it. Could it be a logic board problem? I have already tried restoring it and holding power+home nothing works.
it it touch disease u should to change touch ic
Thanks for sharing this, I did it today and the touch is back. Did the same but 4 times 30 secs and I've also put a small rubber peace behind the ship to keep more pressure on it. Working great for now! Gracias amigo👍🏼
Hi
I did this fix which sort of helped out. Before the fix, the touch screen wouldn't work at all. Now it will intermittently work. Whenever the gray bars come down from the top of the screen I can just bend the phone a little and that will fix it. Rinse and repeat. Apple should fix these diseased iPhones for free. Not our fault for a design flaw.
that's what i did for 3 months, now it doesn't work any longer. touch is now completely dead....
I liked your video thanks man! Will it work for my iPhone 6 Plus as well?
yes it should, try at your own risk though
Hi! Currently having this issue. What alternative did you use if you dont have soldering iron?
I would just buy the cheapest one from ebay
My 6 has this problem I’m beyond slapping and sticking a piece of tape to the ic I will try this.....let’s hope I don’t completely destroy this thing
If anyone has a glass like screen protector, remove it. That was my issue the screen protector was making the phone unresponsive for some reason. After removal, it's working like new. Do this if you haven't. I mean, hey it's worth a shot since this iPhones are expensive give it a try.
I could not able to fix it,iPhone is getting too much hot...It did not starting at all..Please help..
You Sir are a genius. This totally worked. No comment on longevity as only just put back together but going from virtually unresponsive to full functionality has resulted in one very happy son. Many thanks for posting this.
I'm wondering if this fix also can apply to the audio IC on the iPhone 7
Mykhl Ellti good question
May 2017, helped me. Thanks Lucas. Working fine for 1 day, to replace IC would cost me 60-70$
The easy way it’s also a way let’s try 😊
What if you don't have the soldering iron? Is there another thing that I can use?
Mine had this problem, is it a bad idea to just leave the metal plate off the sensors? Every time I put it back on the flicker happened?!
Don't know what to say there.I think the protector is there for a reason, but if it woks for you then yeah just try
I think it's there just to hold the connectors in place.... but more of a 'formality'... I'm not saying it has NO effect, but I'm thinking it's safe to keep it OFF if it helps. I don't see the risk of exposure.... I don't see how anything internally would create an issue for the exposed connectors. If you screen goes black when you're trying to twist to stop flickering, then you could open up and probably see the right-side connector needs to be re-seated.
I like your method to do reballing ic with soldering gun but what you said about the “heat gun” is wrong. You don’t put aluminum foil around ic to work with heat gun on ic because aluminum foil will transfer the heat that you apply to other components around ic. Because of this issue; pro’s use orange color insulating tape around ics in order to protect other components from heat.
i don’t have these tools??? what do i do
yes it does enter the mode
then try and restore with iTunes
Nice video!
Thanks for your comment! I personally watched your videos before I uploaded this one and inspired me to share my solution.
Lucas Guanes thanks for sharing another solution! The more we can educate people on how to fix this issue on a budget the better.
I tried your no soldering method and it worked for my phone. Thanks. However I observed my battery % does not drop while am using my phone until it's zero. Plausible is that .. whenever I plug my phone to power, its does not increase unless I reclip the battery. I have had to open my phone on daily basis because I want my phone to increase in battery %. Is there something I could have done wrongly
O'care repair lab sometimes i have had to restore my phone when a battery doesnt show correctly. And make sure it is a DFU restore. But it is rare, but i have seen it
Rody davis, will this work for me?
hi, so the bottom of my iphone 6 is not working ( i cant open control center, press space) will this method work? is this also a touch disease?
just replaced my screen and im having that exact issue only the very bottom of the touch screen is not responsive which is making it difficult to use most apps (also cant swipe up the control window from the bottom of screen) did you come across any solutions for this by any chance ?
How to fix this problem on iPhone 5s
Before screen replacement and after it
Touch ghost
Same buddy
Need to punch my phone in the face for it to work lol
Same lol
Same here
Smacking worked temporarily for like a minute or two but once I tried smacking it again and shattered the whole screen because the screen loosened up
Lol same here
In my toe
Actually the tape thing worked for me, but it only worked for a limited amount of time for me (about 10 months)
East DallasKick's how do fixe it with tape ?plz answer
@@marlenmolina1994 so do you know for sure that it's touch disease and not that you busted the lcd screen?
East DallasKick's yes it’s touch desease
@@marlenmolina1994 do exactly what the video did. It's what I did I used electric tape and if you need the toolkit I got mine from w almart for 8$.
It worked on my phone for a while, but recently the screen started becoming unresponsive again and has a mind of its own (tapping on apps, making phone calls, etc...)
🤣🤣🤣🤣🤣🤣
Heyy heyy pls reply I just change my battry and now I’m faceing touch problem and when I put my warm hand it start working possible reason
possilbly yes
Rip me phone...
my camera isnt work
Any update on this now? Is your phone still fixed up to now? I'm currently having this issue :(
Hi Jin, I don't have the phone anymore but it worked fine for the months I had it
Does this work if I dropped my phone and only a certain part of my screen doesn’t work 100% of the time?
did you try it ? If yes , what happened ?
I replaced the ic chips on my iPhone 6+
I thought it is fixed permanently, but it came back after using for 3 months
Wow man, you are a pro, replacing the IC is no easy thing. I guess the iPhone 6 problems will eventually make the problem come back no matter what.
I did exactly what you said and my phone is working perfectly. Thank you for sharing the nice MacGyver trick to fix it. That shit was money. Much love brother! \m/
It worked. Thank you so much!!!!!
Woke up today and it doesn’t work anymore
@@angeliataylor-lento768 did you follow these steps?
@@angeliataylor-lento768 ha
Another much easier solution is to place a nano SIM card under the thin metal cover that goes over the 4 display connectors. Search RUclips for "arif iPhone 6 touch disease SIM card". The RUclipsr is "arif" and it worked for me. My 6 plus had no touch response at all unless I applied pressure to bend the phone. Now it's perfect.
I guess the SIM card is just thick enough to press the Touch IC on the flip side of the logic board, enough to make good the connectors. (I've typed this on my "repaired" 6 plus.
Your trick of heating upto 30 seconds just melted all the connections beneath the touch IC and the molten metal came out from the sides. The phone ended up in dustbin.
Sorry to hear that bro. It worked for so many of us it's easy to forget that there is risk in trying this out
@@LucasGuanes 30 seconds are too much a longer period. You must mention correct time and temperature so that others do not ended up like me.
I'm sure different soldering iron have different temps
Can i use an Iron on this instead of a soldering iron?
I guess the principle s the same. The thing is how to transfer the heat to that tiny IC. And if it will get hot enough
I just bought a soldering iron. It's 30 watt
It works more than 4 weeks so far
Wow so happy to hear that!
NEED HELP!! My iphone 6 has a weird horizontal lines on its bottom of the screen. sometimes it showed up but sometimes its gone. now it had a lot of line than before.. please is there any advice ? :')
First I would open the iPhone and make sure all connections are ok
how u do it?
bagus282013 , connections of the screen: www.ifixit.com/Guide/Reemplazo+de+Ensamblaje+del+Panel+Frontal+iPhone+6/29339
For some reason the upper left portion of the inside of my phone looked different. I did my best to put it together..and it’s not working.😢
Katy Denny o
I wish I had someone to do that for me, I can’t find anyone to do it for me
please reply me!
I have a iphone 6s. When i touch the screen it start to spin or automatically opening apps. How to fix that 😭😥
oh thank god! I just found whats wrong with it 😅 my charger is duplicate. its
Output is 1v = 1A. My mom's phone charger output is 1v = 1.55A 😅
so how did u fix it? please help
It works! :D thanks dude, hope it will last till new iPhone 8 comes out.
Nice to hear that!
4:30 you said your soldering iron is already hot and then you touched the screw.
that's attention to detail!
When my brightness is up it's totally not working but when down it does but I can't see
watching with my fixed iphone 6. hahahaha i just placed a small piece of a sim card below the camera inside the phone. puts pressure to the ‘loose circuit tape’ .
Ic *