I have had amazing results with the Makita XPS bits as well my top 2 favorite bits are defenitly Milwaukee Shockwave and the makita XPS bits i have done over 58 projects so far with the makita XPS bit torx 25 and its still holding up great on large projects @ClientGraphics
Really cool! I especially liked the diagrams for comparison. Also cool, that you showed the force that breaks them. Unfortunatly most of the brands are not common around here, but anyway great test! Thank you! Greetings from Vienna/Austria/Europe.
I use Makita, Milwaukee, and Masterforce from Menards. The best for me depends on the job and the application. Maybe I will do a video on that someday. Honestly, I have not found a difference in strength between Makita and Milwaukee but I tend to agree with your assessment the Milwaukee is possibly one of the strongest.
Very interesting video CG! Thanks for taking the time to make it and share it! I have to say I’ve use Irwin, dewalt, Milwaukee, craftsman, workpro and the Irwin’s are some of my favorite for t25. The fitment is hard to beat. The dewalt and craftsman in my opinion wear down over time where as the Irwin’s have just kept going and going
ClientGraphics I’ll be honest I have never seen that holder. I purchased my bit kit about 4-5 years ago and it’s black oxide very much the same styling as the craftsman bit holder you have. Now the Milwaukee bit holders are VERY tight which is good and bad but I don’t like that because just a little bit of dust or grime and it’s hard to pull bits back out
ClientGraphics.. Very nice demonstration, thanks for taking the time to do that and share it with us.. "Two thumbs down" not that is some funny stuff. HAHAHA
Thanks for watching and commenting! This video really did take a long time. The Bosch impact ran for 4.5hrs straight and went through 4 batteries just to drive all the screws.
I agree with you. I personally use Performax and Montana. But that Milwaukee was impressive if it wouldn’t have slipped on me a few time and should last.
I,too, thought this was @ProjectFarm when I saw the thumbnail. Now if you have ever seen a video from him, then you know that is a pretty damn good compliment. Great video. Thanks for the content.
FANTASTIC video. I was looking to mass purchase some t25 bits and this video helped out a lot. Concise, easy to follow, great narration, very informative. Earned my sub. I have been using the Milwaukee t25s driving primarily 2.5"-3.5" grks into wood and they work great, like you said the fit is snug which helps a lot starting a longer screw.
Nicely done video. I like the test jig you made. It puts everything on an even playing field. It seems to me there is some difference in brands but not a lot. I was disappointed in the one made in USA. I am also glad you included the Menards brand in the video. We have a Menards in our town and they outsell everyone in our area.
I spent a few weeks looking for the right fastener and setup method to hold everything together, appreciate you commenting. My two go to brands will still be Performax and Montana USA. One is priced cheap and the other grips the fastener well and I can get them both at Menards.
I use a lot of Montana bits and in my opinion they don't wear much and last longer over my Dewalt and Hitachi bits. The Hitachi bits also last and have great fitment. (also sold at Menards)
My favorite bit now days is the Milwaukee Shockwave torx bits they have held up the most with 1 bit lasting me well over 68 large projects before i needed to grab another one out of my box @ClientGraphics
Oh my God I love how many tests he ran on all these products! I wish I could get the final answer is sooner as I’m trying to head out and buy some bits but I like this kind of research
Another good video Chris! I had that same AcDelco torque adapter, but mine arrived DOA in the box, I was so mad, I had to run over to Harbor Fright buy the Quinn model which has far less torque ability.
If the Quinn could do Inch Pounds it would be awesome as the 2 AA batteries last longer than the Coin cells in the AC Delco which is a rebrand, but so is the Quinn. Quinn is still a good bang for your dollar.
You know how I feel about the DeWalt hand tools and accessories... I always use them... and they never let me down Good to see that you are using Menards products in your videos... a lot of people on RUclips disregard Menards but they are a viable option just like Lowe's and Home Depot... Just to put it in perspective....the difference in foot pounds from the highest rated Torx bit to the lowest Torx bit is about three and a half foot pounds.... so they're all generally as strong as one another... wear might be a different thing... one thing that does remain constant though is using the to right tool and accessory the right way.... that's how you get the greatest longevity out of your bits and tools.... Thanks Chris...🍻
I have a Menards, Home Depot and Lowe’s all about 1 mile apart. I went to all 3 for this video and lucked out that Tractor supply had the Irwin set. I personally use the Performax and Montana but usually in a 2” or 3” so I don’t have to use a bit holder.
@@ClientGraphics Home Depot is closest to me...(5 min walk)... Lowes is a10 min drive and Menards is a10 min drive....I frequent HD most.. but all have their up side...I just like seeing videos that compare Menards along with HD and Lowes... and Tractor Supply...👍
I figured the Milwaukee would win this won, their design is top knotch. These test beat the Bears, very accurate. Anyone looking to buy the best option , who seeks accurate results should subscribe
I got a hundred piece bit set for cheap and of course the smaller torx and allen wore down quickly. Went to True Value, got some expensive Irwins individually for about 3-5 dollars each depending on the size. Never been unhappy with any of them. But thats a crapload of money to spend for a complete set just to get something that doesnt fail too quickly.
Am I missing something? None of those bits sheered-off if you watch closely. The screw head simply stripped out. All you’re measuring is the strength of that specific screw head’s splines. The better fitting bits will then obviously perform the best.....
They all cleanly sheered off and not a single fastener head stripped. You can check out some of the bits in this Instagram post. You can see all the bit tips as well as the bits that have a twist in them. You want a twist with the sheer otherwise the bit is technically too hard and could sheer during use. instagram.com/p/CDUafVwDGSh/?igshid=gvqoay355p7
Love systematic videos like this. Check out those German brands! There's a whole nitch of folks loving Wiha, Felo, Wera, etc, and for good reason -- though they're pricier! And then there's a bunch of non-Home Depot/Lowes USA made that are aren't cheap enough for their shelves that'll last you a few times longer. My personal pick? Wiha. Wiha all day long.
as a carpenter, i have broke 3 dewalt bits screwing into concrete (approx 5 years old) with blue 6in masonry screws in one day.... but have never broken a Milwaukee bit to this day
Great information on the trox bits I've had good luck with my DeWalt bits I'm not going to change mainly because I can get the DeWalt line easy at my local lowes but I'm not afraid to try the others now
11:40 Maybe I didn't catch it, and I don't think we saw images of the bits after testing.... but could the bits be stripping out the fastener head and not having damage to the flutes?
I use dewalt branded tools mainly, at my shop where they get a hot supper every day. They just work, I know if they can stand up to the abuse at work then they will last a long time at my home with smaller projects. Plus the max fit bits just really fit into fasteners nicely.
@@ClientGraphics i chosed milwaukee shockwave, smallest 32pcs set. We have here expensive electronic tools. Just wish to buy dewalt 996/887 set with batteries for 300$ :)
I would rather have a slightly softer and not destroy my fasteners in the cars. The harbor freight Baur looks really great 👍, with coupons I can buy those a few x over, it doesn't bother me, especially with the 20% off coupons. Good info. For my sockets and other tools I don't buy harbor junk
they just twist and strip your bolts out they have given so many hours of extra work from getting mixed in with my good one never buy harbor freight unless its for a gift for someone you hate or a competator that you want to too sending to the store after troubles to return and strip the new ones out trying to fix troubles😅
So based on this it looks like not any one of these would work to get a set screw out of a rotor? Those things are so tight I snapped my impact Torx bit
I was expecting to see the difference between breakoff points being a greater difference like 20-30, I was surprised they're actually so close. I have both Bosh & Milwaukee kits and to me the Milwaukee seems to fit everything just that much more precise and the Bosch finish is off of each bit after like the first use of it.
ClientGraphics S02 for sure. My brand head to head would be Milwaukee Shockwave vs Dewalt MaxFit vs Wiha vs Wera. And if you have time Makita gold & Bosch. A rated bit fitment measure or grade would be good too. Thanks for your hard work. :)
Maybe if you live in Canada, here in the USA torx are used a lot.. Hell I even ordered a box of robertson deck screws to see what theyre about and hex IMO are better.. I have had more cam out with robertson than torx using a drill and impact driver.
I’d like to see a test where each bit is brought to 70-90% of the failure point 10 or 20 times and then is tested, to simulate lag bolts and self tappers into wood and aluminum or wood and steel
In theory that sounds like an excellent test. I’d have to see how that plays out in a video format. Definitely have to speed up that test method in video. Kind of interesting to see how that would test out.
Project Farm is great, but when you get two content creators doing the same thing (or close to it) now you have double the content. I have no idea why you're complaining people!
I wish you would have tried some Spax bits. They make their own for their proprietary screws, but it works REALLY well. Especially paired with the Makita bit holders!
I started getting bits and Rockwell test back in March before COVID and the XPS wasn’t in my store and then the college shut down. If it helps the XPS perform similar to the Harbor Freight Bauer.
I don't even waste my money on them Chinese bits... I buy PB Swiss, Vessel. Japanese and German made ones. They last longer. Fit tighter. Have no run out wobble... Which all destroy the fastener...
Wanna see expensive? Get a Chapman bit , most of their bits are about $1.50 but some of their bits are up to $1.85. Of course their bits are not meant for impact or screw guns...ect.
Chapman Manfacturing is an awesome USA made bit. They have some good information about torx vs star bits but I don’t have a source for them locally. I did talk with them before doing this video👍
@@ClientGraphics I just buy them off their website but I'm buying them for a personal airgun smithing application, and am only buying what I need as I need it here and there to complete a set for my specific needs. You wouldn't want to be replacing them all the time for what they cost, and I don't expect to ever need to replace them.
I have the dewalt bit holder like the Kobalt one and it is pure garbage.. I hate the sleeve on it. I ended up using a cheap warrior bit holder for my small bits. Just got in a 6" milwaukee bit holder than I havent used yet..
The sleeve is designed to go over the screw once it's on the bit. When the sleeve is over the screw, you don't have that initial awkward wobble when you're starting it, which leads to unintentional angles, dropped screws, or a torx bit straight into your finger. It's really handy when you need to run a screw in at an angle or need a lot of pressure to get it started. If it easily falls over the bit, then it's not operating as designed. You can pop the snap ring off and bend it out just a tad, that'll hold it tighter. Another fix is to use pliers to apply pressure on the outer sleeve and slightly oval it, that provides more overall friction...but it also adds friction while it's turning as well, too much and you'll ruin the whole reason the sleeve is there. It's also not that difficult to just take it off entirely if you have no use for it.
Too bad you did not try any of the high end German brands like Wiha, Felo & Wera. I've found those to be better than most ones you can buy off the shelf. They work and fit better than either the DeWalt or Milwaukee bits I have. Hardness is a double edge sword as it make them far more brittle and/or they will strip fasteners rather than the bit, which is a problem on cars...
When I saw the thumbnail I thought it was Project Farm lolololol, Pretty good test btw.
He is an inspiration and I do like his channel!
Same dude!
Same
Same Lol 😂
Project farm has a great channel and yes i thought it was a project farm video when I saw the thumbnail
Guns.... Lots of guns and optic mounts use torx bits.... I've stripped far too many small torx bits so now I'm here... Thank you for testing!
I have had amazing results with the Makita XPS bits as well my top 2 favorite bits are defenitly Milwaukee Shockwave and the makita XPS bits i have done over 58 projects so far with the makita XPS bit torx 25 and its still holding up great on large projects @ClientGraphics
Really cool! I especially liked the diagrams for comparison. Also cool, that you showed the force that breaks them. Unfortunatly most of the brands are not common around here, but anyway great test! Thank you! Greetings from Vienna/Austria/Europe.
I use Makita, Milwaukee, and Masterforce from Menards. The best for me depends on the job and the application. Maybe I will do a video on that someday. Honestly, I have not found a difference in strength between Makita and Milwaukee but I tend to agree with your assessment the Milwaukee is possibly one of the strongest.
Very interesting video CG! Thanks for taking the time to make it and share it! I have to say I’ve use Irwin, dewalt, Milwaukee, craftsman, workpro and the Irwin’s are some of my favorite for t25. The fitment is hard to beat. The dewalt and craftsman in my opinion wear down over time where as the Irwin’s have just kept going and going
The Irwin bits were good, but that bit holder.
ClientGraphics I’ll be honest I have never seen that holder. I purchased my bit kit about 4-5 years ago and it’s black oxide very much the same styling as the craftsman bit holder you have. Now the Milwaukee bit holders are VERY tight which is good and bad but I don’t like that because just a little bit of dust or grime and it’s hard to pull bits back out
ClientGraphics.. Very nice demonstration, thanks for taking the time to do that and share it with us.. "Two thumbs down" not that is some funny stuff. HAHAHA
Thanks for watching and commenting! This video really did take a long time. The Bosch impact ran for 4.5hrs straight and went through 4 batteries just to drive all the screws.
Montana Brand tools I have used in the past always have worked well
I agree with you. I personally use Performax and Montana. But that Milwaukee was impressive if it wouldn’t have slipped on me a few time and should last.
Where do you buy the Montana brand at?
I,too, thought this was @ProjectFarm when I saw the thumbnail. Now if you have ever seen a video from him, then you know that is a pretty damn good compliment. Great video. Thanks for the content.
FANTASTIC video. I was looking to mass purchase some t25 bits and this video helped out a lot. Concise, easy to follow, great narration, very informative. Earned my sub. I have been using the Milwaukee t25s driving primarily 2.5"-3.5" grks into wood and they work great, like you said the fit is snug which helps a lot starting a longer screw.
Thanks Steffan! I have a Robertson Square drive one I'm working on if I ever find the time....
No Wiha or Wera? Those are the ones we buy ... Bummer.
I was thinking the same.
Wera for me
@Chris P. Weiner sound like only hard core tool user or real profissional guy
I agree, my ranking for the top 3: PB Swisstools, Wera, Wiha.
And hazet
@@aerocap
nice shoutout to project farm. nice to see you got similar results
Nicely done video. I like the test jig you made. It puts everything on an even playing field. It seems to me there is some difference in brands but not a lot. I was disappointed in the one made in USA. I am also glad you included the Menards brand in the video. We have a Menards in our town and they outsell everyone in our area.
I spent a few weeks looking for the right fastener and setup method to hold everything together, appreciate you commenting. My two go to brands will still be Performax and Montana USA. One is priced cheap and the other grips the fastener well and I can get them both at Menards.
I use a lot of Montana bits and in my opinion they don't wear much and last longer over my Dewalt and Hitachi bits. The Hitachi bits also last and have great fitment. (also sold at Menards)
Why no Makita XPS? The gold bits are now somewhat obsolete.
My favorite bit now days is the Milwaukee Shockwave torx bits they have held up the most with 1 bit lasting me well over 68 large projects before i needed to grab another one out of my box @ClientGraphics
Much more knowledge and handled more professionally then every other tool review channel I’ve watched I’m impressed
Thanks a nice comment! Thanks Shawn
Oh my God I love how many tests he ran on all these products! I wish I could get the final answer is sooner as I’m trying to head out and buy some bits but I like this kind of research
This is almost like project farm!
He’s got a great channel 👍
Another good video Chris! I had that same AcDelco torque adapter, but mine arrived DOA in the box, I was so mad, I had to run over to Harbor Fright buy the Quinn model which has far less torque ability.
If the Quinn could do Inch Pounds it would be awesome as the 2 AA batteries last longer than the Coin cells in the AC Delco which is a rebrand, but so is the Quinn. Quinn is still a good bang for your dollar.
You know how I feel about the DeWalt hand tools and accessories... I always use them... and they never let me down
Good to see that you are using Menards products in your videos... a lot of people on RUclips disregard Menards but they are a viable option just like Lowe's and Home Depot...
Just to put it in perspective....the difference in foot pounds from the highest rated Torx bit to the lowest Torx bit is about three and a half foot pounds.... so they're all generally as strong as one another... wear might be a different thing... one thing that does remain constant though is using the to right tool and accessory the right way.... that's how you get the greatest longevity out of your bits and tools....
Thanks Chris...🍻
I have a Menards, Home Depot and Lowe’s all about 1 mile apart. I went to all 3 for this video and lucked out that Tractor supply had the Irwin set. I personally use the Performax and Montana but usually in a 2” or 3” so I don’t have to use a bit holder.
@@ClientGraphics Home Depot is closest to me...(5 min walk)... Lowes is a10 min drive and Menards is a10 min drive....I frequent HD most.. but all have their up side...I just like seeing videos that compare Menards along with HD and Lowes... and Tractor Supply...👍
I figured the Milwaukee would win this won, their design is top knotch. These test beat the Bears, very accurate. Anyone looking to buy the best option , who seeks accurate results should subscribe
The Milwaukee wins for being the bit with the hardest material and not the most expensive. Thanks @The Backwoods Mechanic ❤️ 🧰 🛠
Thanks much for your time to test them! Too bad there wasn't Wera, Wiha, and the foremost PB Swisstools (brand dedicated to professionnals)
I totally agree with that. It is indeed a pity that these brands are not included. Personally, I'm a big fan of PB Swiss Tools!
Excellent comparison test-Thank you.
Appreciate you watching and commenting👍
I got a hundred piece bit set for cheap and of course the smaller torx and allen wore down quickly. Went to True Value, got some expensive Irwins individually for about 3-5 dollars each depending on the size. Never been unhappy with any of them. But thats a crapload of money to spend for a complete set just to get something that doesnt fail too quickly.
Very thorough and informative.
Thanks Bill👍🏻
Am I missing something? None of those bits sheered-off if you watch closely. The screw head simply stripped out. All you’re measuring is the strength of that specific screw head’s splines. The better fitting bits will then obviously perform the best.....
They all cleanly sheered off and not a single fastener head stripped. You can check out some of the bits in this Instagram post. You can see all the bit tips as well as the bits that have a twist in them. You want a twist with the sheer otherwise the bit is technically too hard and could sheer during use. instagram.com/p/CDUafVwDGSh/?igshid=gvqoay355p7
Wow dude the work that went into this video is amazing
Nice work, comprehensive.
Thanks John 🙏🏻
Not a bad testing method all things considered. Torx is honestly a terrible design that us tool makers dread having to try to make durable.
Any coupon codes;)? I’ve been eyeballing your low profile impact sockets and hose clamp pliers
@@billlee1724 Would if i had any, but we're just the factory not a retailer so we don't have any to give.
I have been eyeing those Astro Nano Impact Sockets🥰 Hopefully if the video does well maybe I can buy myself a set for a future video!
@@ClientGraphics the astro nano sockets are amazing chris I love mine a ton @ClientGraphics
AstroTools well hey worth a try;) you guys keep up the awesome work! Looking forward to everything to come!
I get 400 screws per bit with Milwaukee before it started slipping. Great stuff
Milwaukee makes a good hard bit. Probably one of the hardest pieces of tool steel I’ve tested.
Love systematic videos like this. Check out those German brands! There's a whole nitch of folks loving Wiha, Felo, Wera, etc, and for good reason -- though they're pricier! And then there's a bunch of non-Home Depot/Lowes USA made that are aren't cheap enough for their shelves that'll last you a few times longer.
My personal pick? Wiha. Wiha all day long.
as a carpenter, i have broke 3 dewalt bits screwing into concrete (approx 5 years old) with blue 6in masonry screws in one day.... but have never broken a Milwaukee bit to this day
Another awesome video! Thanks Chris
Great information on the trox bits I've had good luck with my DeWalt bits I'm not going to change mainly because I can get the DeWalt line easy at my local lowes but I'm not afraid to try the others now
Thank Chris, I am partial to the Irwin bits but have used many different brands.
That was a nice blue handle matco ratchet in the background of the beginning
It sure is! Not sure I can bring myself to test it out yet....
@@ClientGraphics haven't you tested a matco ratchet in the past? I would think it would be the same strength as any other color handle
Stay sharp are probably the best bits i have used on the job. 1 bit 2or 3 months of use doing furniture install.
Wish you showed closeups of the individual bits post failure, tells a lot about how they each failed that is more useful than just the inch lbs
Great video! Thanks for the thorough testing.
Anytime, thank you for watching and commenting!
In order to get the best fitting bit then I would say the bit that normally comes with a box of torx 25 screws will always fit the best
Come on man. Don’t be like everyone else and copy a thumbnail. Be original. Nice test. Love your videos
I'd like to see this test with a T10 or T15 size. All those high brands strip out the deck screws as well as bend the fins of the bits.
Great video 👍🏻👍🏻
Thanks buddy!
I have that Irwin bit holder and i damn near have to use pliers to remove the bits from it.
We are gonna test that!
I love milwaukee! Favorite tools.
Irwin seems to be the best value for performance
11:40 Maybe I didn't catch it, and I don't think we saw images of the bits after testing.... but could the bits be stripping out the fastener head and not having damage to the flutes?
Clean sheer of bits here is the pic on Instagram instagram.com/p/CDUafVwDGSh/?igshid=1px8l46xy5okd
I use dewalt branded tools mainly, at my shop where they get a hot supper every day. They just work, I know if they can stand up to the abuse at work then they will last a long time at my home with smaller projects. Plus the max fit bits just really fit into fasteners nicely.
Great Test
Thanks Scorpion for watching and commenting.👍🏻
great video
Thanks Eduardo👍
Wera is probably the best, I will say I have some insert torx bits from Proto that are very good.
Only complaint is you didnt have grey pneumatic.
Ive had pretty poor experience with their star bits specifically
Nice test. Best regards from Poland, im looking for new bit set btw :)
Wow, thanks for watching from 4952.43 miles away👍🏻
@@ClientGraphics i chosed milwaukee shockwave, smallest 32pcs set. We have here expensive electronic tools. Just wish to buy dewalt 996/887 set with batteries for 300$ :)
i wish you would involve Wera in your showdowns, i really think they are the best quality (on account of them being the smartest in set-menaging)
I would rather have a slightly softer and not destroy my fasteners in the cars. The harbor freight Baur looks really great 👍, with coupons I can buy those a few x over, it doesn't bother me, especially with the 20% off coupons. Good info. For my sockets and other tools I don't buy harbor junk
they just twist and strip your bolts out they have given so many hours of extra work from getting mixed in with my good one never buy harbor freight unless its for a gift for someone you hate or a competator that you want to too sending to the store after troubles to return and strip the new ones out trying to fix troubles😅
So based on this it looks like not any one of these would work to get a set screw out of a rotor? Those things are so tight I snapped my impact Torx bit
Nice testing. .
Can you do square drive #2 bits?
The new mac tools rbrt bits is were it's at
You should test VEGA brand bits. They are the ones who manufacture bits for Snap-On.
I was expecting to see the difference between breakoff points being a greater difference like 20-30, I was surprised they're actually so close.
I have both Bosh & Milwaukee kits and to me the Milwaukee seems to fit everything just that much more precise and the Bosch finish is off of each bit after like the first use of it.
Next time test Robertson! No one uses torx much anyway. 90% of all screws are Robertson now-a-days.
It’s on my to do list. Would you rather see S01 or S02 and which top 3 brands as I probably need to limit it to 6-7 brands total.
ClientGraphics S02 for sure. My brand head to head would be Milwaukee Shockwave vs Dewalt MaxFit vs Wiha vs Wera. And if you have time Makita gold & Bosch. A rated bit fitment measure or grade would be good too. Thanks for your hard work. :)
Maybe if you live in Canada, here in the USA torx are used a lot.. Hell I even ordered a box of robertson deck screws to see what theyre about and hex IMO are better..
I have had more cam out with robertson than torx using a drill and impact driver.
You should get affiliate links and Amazon store and link all these diff bits
I’d like to see a test where each bit is brought to 70-90% of the failure point 10 or 20 times and then is tested, to simulate lag bolts and self tappers into wood and aluminum or wood and steel
In theory that sounds like an excellent test. I’d have to see how that plays out in a video format. Definitely have to speed up that test method in video. Kind of interesting to see how that would test out.
Milwaukee got worn off faster than other bits brand based on 14:12 for a graph?
Kinda surprised you didn’t test a spax bit.
"If you didn't like it, give it two thumbs down" Nice.
Looks like brand is more important than where it is made.
Project Farm is great, but when you get two content creators doing the same thing (or close to it) now you have double the content. I have no idea why you're complaining people!
If you want some really good torx bits, find yourself some old Apex bits, some of them bits are damd near bullit proof.
Try wera impaktor bits
One day I’ll pull the trigger and get Wera, Wiha and Vega bits.
Anyone have a preference for gun tools?
I wish you would have tried some Spax bits. They make their own for their proprietary screws, but it works REALLY well. Especially paired with the Makita bit holders!
Great content!! Thanks!!!
Appreciate you watching and commenting.
What about wera and felo
2 hours ago says fresh what about the new makita bits 🍻🍺
I unfortunately started this video before Makita XPS was out, but maybe this fall assuming college is open to Rockwell test them.
The square bit used in Canada is all ya see in Canada lol
Please test also with Japanese products, namely Anex and Vessel. I feel this Japanese product can beat this already tested product.
I use milwaukee for my bits
Love it. Don't use star bits at all but your videos are good and I expect similar results from squar bits
How about the grk bits?
I should have tested that bit and the one that came with the fastener. Maybe next time.
Why didn't you try wera bits those are like the most premium in Germany
Where is the ryobi brand?
Testing torx bits yet no Wera.... Weird.
Why not use Makita XPS instead of Gold????
I started getting bits and Rockwell test back in March before COVID and the XPS wasn’t in my store and then the college shut down. If it helps the XPS perform similar to the Harbor Freight Bauer.
ClientGraphics thanks for the clarification
Hilti, hands down
I’ve only used there SDS drill bits
Hold up this ain’t ProjectFarm?
Next time test the bit that comes with the box of screws.
I don't even waste my money on them Chinese bits... I buy PB Swiss, Vessel. Japanese and German made ones. They last longer. Fit tighter. Have no run out wobble... Which all destroy the fastener...
I have dewalt, Milwaukee and Makita bits my fave are the Milwaukee I use the t30 constantly at work and it's doesn't even look slightly worn
Wanna see expensive?
Get a Chapman bit , most of their bits are about $1.50 but some of their bits are up to $1.85.
Of course their bits are not meant for impact or screw guns...ect.
Chapman Manfacturing is an awesome USA made bit. They have some good information about torx vs star bits but I don’t have a source for them locally. I did talk with them before doing this video👍
@@ClientGraphics
I just buy them off their website but I'm buying them for a personal airgun smithing application, and am only buying what I need as I need it here and there to complete a set for my specific needs.
You wouldn't want to be replacing them all the time for what they cost, and I don't expect to ever need to replace them.
Sorry but really hard to take a list seriously when they fail to include Wiha and Wera or Felo bits
If you are not testing Wera your are not running a proper test.
I have the dewalt bit holder like the Kobalt one and it is pure garbage.. I hate the sleeve on it. I ended up using a cheap warrior bit holder for my small bits. Just got in a 6" milwaukee bit holder than I havent used yet..
The sleeve is designed to go over the screw once it's on the bit. When the sleeve is over the screw, you don't have that initial awkward wobble when you're starting it, which leads to unintentional angles, dropped screws, or a torx bit straight into your finger. It's really handy when you need to run a screw in at an angle or need a lot of pressure to get it started. If it easily falls over the bit, then it's not operating as designed. You can pop the snap ring off and bend it out just a tad, that'll hold it tighter. Another fix is to use pliers to apply pressure on the outer sleeve and slightly oval it, that provides more overall friction...but it also adds friction while it's turning as well, too much and you'll ruin the whole reason the sleeve is there. It's also not that difficult to just take it off entirely if you have no use for it.
Nice review but cheesy thumbmail.. It looks identical to PF's drill bits video down to the text and the "let's find out"...
I use strictly Mikita gold.
I've broke those makita bits in half
Can't believe you wimped out and didn't answer your own question.
Too bad you did not try any of the high end German brands like Wiha, Felo & Wera. I've found those to be better than most ones you can buy off the shelf. They work and fit better than either the DeWalt or Milwaukee bits I have. Hardness is a double edge sword as it make them far more brittle and/or they will strip fasteners rather than the bit, which is a problem on cars...