I make the rackets for myself completely by hand. It takes many hours and I use single-layer wooden, chestnut, walnut, and bamboo boards. It is very satisfying when you play with them. They are not as slow as we might think since they don't have carbon. Still, I love this video.
@@Phoenix-ph9qp Hi Phoenix, I haven't made videos because I usually work on them for a while every day and I don't consider myself a teacher. I am a club player. Regarding selling them, I am considering it to be able to buy a wood laminator and improve my rackets.
ракетка может быть любого размера, формы и веса. не менее 85% должно быть из натурального дерева. и углерод может быть добавлен, не превышая 7,5% толщины или 0,35 мм. так взбодрись@@Not_Z-vastik_Stop_Putinism
Just , it was good experience for me and i enjoyed the beauty and good work . I am not professional player but i lik to play this sport . God bless you, you are great artist .
I imagine that the situation must be similar to yours, with a lot of skill (throughout your life) in your fingers to write sarcasm but later in bed they became useless to satisfy your partners.
Nicely made. . The router bit that cut the handle could have a round shape to it, save shaping it on the sanding belt. Also I noticed that where the bit started and stopped when cutting out the bat it left an indentation, this could be avoided by starting the cut at the base of the handle on the corner. Phew that laser was super quick, there’s me thinking that was carved by hand : ) but I did notice a tiny chunk of wood had splintered off - quality control ? ?. Looks like the box that the bat is put in is more expensive to make than the bat itself. Obviously the bats are more for show as a serious player would apply their own choice of rubbers. P E A C E. : )
Man came in and critiqued one of the finest and most high grade table tennis racket artisans in the world, as if he was saying to his local baker that he left the croissants for too long in the oven🤣😂
@@nicolasgoossens I won’t justify my comments with my life long experience, knowledge and qualifications. Anyone with the understanding of working with wood will know exactly what I have said and advised in my comment is correct and fair. As regards the local baker remark, I worked in a baker’s shop from the age of 10 to 15, so yes, I would notice if something had been baked for too long.
@@FUNKINETIK no serious table tennis player uses these blades or rubbers. u were on point with your criticisms. hats off to the business owner anyway, gotta make a living out there somehow. im sure that the rackets you can find in a western sporting goods store are going to be less playable than these.
Olá, i"am brazil. Vc vende essas raquetes que você faz? Se sim quanto que é? Pode envia-lá para mim quando for comprar. Sou novo e acabei de me inscrever e deixar like.
Здравствуйте! Очень замечательная работа с деревом! Но!! Почему нет лака на ручке, или финальной обработки?! Ещё 1 замечание. Не доверяйте заводскому клею на накладках, в нем есть пропуски, или неравномерность. Со временем образуются мертвые точки, пузырьки, или накладка отходит. Добавьте своего клея, рекомендуемого заводом изготовителем накладки. (Сейчас это на водной основе) Так ракетка прослужит дольше, и ваше качество будет радовать владельца много дней или лет. :)
I trained as a toolmaker a long time ago ... your milling cutters need sharpening :-D (And a slightly higher cutting speed aka more RPM would probably help too). Apart from that: nice video
Dear Sir (GozipTong) ??? You're name - I was touched watching you're video On how you're bats are finely cut in articulate designs and artistic behaviour It was beautiful and a precious moment I would like to know 10:45s there was a Dense cut out in the handles I didn't get or understand that ? And you're customised racquet holder is just a gem I spent time cutting out 14" inch dough Balls and Vega and I've never seen it up Close and like this and how would you may get the pressing and prints that easy like I would say good job Thankyou Steven James you're sub watcher
It's pretty common for a table tennis blades to have some cut out inside handle for weight balance. It shifts the balance towards the head, which give you more power and clearer feeling, but it's not for everyone because it makes entire raquet to feel heavier.
У меня ещё были некоторые сомнения, насчет вероятной стоимости этой ракетки между «очень дорого» и «невероятно дорого», пока в конце не увидел её футляр. После этого сомнения сразу пропали 😁
Yeah, but where did the plates for these rackets come from? the main thing of the blade is just there already. I mean, even 0.05 mm of any layer changes the characteristics of the blade significantly. I wold love to see how it’s done, and not just forming the plate and handle.
Только один момент, в итоге готовой ракеткой играют чайники без техники. Надо клип завершить хотябы правильным элементом, а то сомнение возникает, хорошую ли ракетку они сделали.
Играют работники скорее всего, поэтому да техники у них нет, но по накладкам не дешевым Xiom Vega europe понял, что и основание тоже должно быть хорошее. Не понятно правда из каких пород дерева оно сделано.
Обычная ракетка, ничего особенного от неё не ждите. А накладки которые вы оцениваете по стоимости - типичный ширпотреб, не представляю кто из серьёзных игроков будет такими пользоватся.
Please don't just hand-paint random brushstrokes and then Lasercut the wood like that! Why didn't you resin/lacquer the handle afterwards to prevent dirt buildup in the gaps. Using a scoring cut before making the full-depth plunge cut will help with better edges. That T-slot in the handle is STIGA MARKETING BS! It makes the blade vibrate even more losing the precise touch, causing poor balance and lack of feeling from the handle! THIS IS MAIN REASON I NEVER BUY STIGA! Also PU-Varnish is a good decision, but again why didnt you PU Varnish AFTER paint?? Wouldn't the paint just come off the below previous PU Varnish layer ??? I hope you are not one of those cheap chinese imitation manufacturers.
I think STIGA’ｓvibration is good point,but it is bad work. It isn't major maker ptroduct. I wonder this was a racket made by XIOM... Only good point is looks,,, Others are all bad ,,,
@@QYXP way back in 1977 when I was 13 years old wanted a skateboard with a kicktail at the front as well as the back, there was nothing like that about and so I made my own (and one for a friend) by making a wooden mould and laminating thin layers of plywood together. Guess I should have started a business with my design, it wasn’t until the 90’s that skateboards began to look like the one (two) I had made. P E A C E. : )
Applying glue is necessary when attaching rubbers to a blade but i know 2 rubbers that have factory-applied glue layers; DHS Hurricane 3 NEO and Yinhe Big Dipper You're welcome 😊
yep, 75% of work in making tt blade is decorative. 75% of the price is marketing margin. anyone can make basic super zlc blade with a plain handle at home for ~30e (instead of 140-240e sold by big brands), and it's that expelsive 'cuz you'll have to buy at least 10 sheets of core and finishing wood and 100x30cm carbon sheet. making 5 blades form a minimal ali-e pack would make your blade cost you like 10euros (and max 1h of work (minus night hours of pvc glue drying out). and if you're lazy, just buy 5pl basic 5pl cheap chinese 10e blade, and clue carbon and hinoki/aouys ply to it, i've done it 10 times, makes you just fine off+ outer carbon blades out of dirt cheap stuff. take a def wooden blade, glue your plies and thicker outer ply, it'll feel like a nice inner carbon. plus, oversized def blades can be cut into cybershape hex style.
I just came back to a game after many years because I got inspired with off sett handle which is more formal approach to hold rocket with off set wrist
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
i watched from start to finish, the amount of work and dedication is absolute . love it!
at 11:44 nice pistol racket :)
@Hasan Soliyev it's about 40 usd I think
I make the rackets for myself completely by hand. It takes many hours and I use single-layer wooden, chestnut, walnut, and bamboo boards. It is very satisfying when you play with them. They are not as slow as we might think since they don't have carbon. Still, I love this video.
You should make a video on it. By the way do you sell those rackets?
@@Phoenix-ph9qp Hi Phoenix, I haven't made videos because I usually work on them for a while every day and I don't consider myself a teacher. I am a club player. Regarding selling them, I am considering it to be able to buy a wood laminator and improve my rackets.
Жаль, что они не допущены к соревнованиям ITTF.
ракетка может быть любого размера, формы и веса. не менее 85% должно быть из натурального дерева. и углерод может быть добавлен, не превышая 7,5% толщины или 0,35 мм. так взбодрись@@Not_Z-vastik_Stop_Putinism
sarap cguro magkaroon ng ganyang racket pero gsto k monkey ang tatak. merry Christmas po
The song is so good that it almost made me sleep and your artwork and blade mastery is extraordinary
You can't give up now, it's just a season. Whatever you are going through. No matter how hard it is... It will pass. Better days are coming ahead ❤️
That a huge comment
Thank you 🙏
This man is an artist
I need one like this racket 😭
It is not one person. At least one is right-handed and one is left-nanded.
화이팅입니다 멀리서 응원합니다 ~^^*
And great choice of music, beautiful
Just , it was good experience for me and i enjoyed the beauty and good work .
I am not professional player but i lik to play this
sport .
God bless you, you are great artist .
단위 공정마다 표준화 문제점이 많군요
목재 온습도 관리 환경 (여름철과 겨울철 제조 lot 편차)
접합제 도포두께(헤라 도포)
합지 프레스 압력(공압이나 유압 아닌 작업자의 감각 의존)
그립 메뉴얼 가공(그립감 편차)
우리나라는 이빨 명인, 이빨 감독들이 너무 많아.... 만드는 것 없고 중명하지 못 하면 조용히 좀 있으시길....
어휴 B S
Case is such a good touch. Makes me want one.
The tasteful thickness of it, oh my god it even has decals
super satisfying. & it makes me appreciate my rackets a whole lot more! thanks for sharing!
Wow, imagine making such a beautiful racket and then playing table tennis like that ;P
I imagine that the situation must be similar to yours, with a lot of skill (throughout your life) in your fingers to write sarcasm but later in bed they became useless to satisfy your partners.
Great video. At 11:26 wooden cases are shown. Please make a video of how you make them.
외길로 라켓 만드시는 장인이 있어 감사합니다. 탁구인들도 국산품 사용합시다
Человек делает с душой. Вкладывая частичку себя в каждый экземпляр. Браво!
Nicely made. . The router bit that cut the handle could have a round shape to it, save shaping it on the sanding belt. Also I noticed that where the bit started and stopped when cutting out the bat it left an indentation, this could be avoided by starting the cut at the base of the handle on the corner. Phew that laser was super quick, there’s me thinking that was carved by hand : ) but I did notice a tiny chunk of wood had splintered off - quality control ? ?. Looks like the box that the bat is put in is more expensive to make than the bat itself. Obviously the bats are more for show as a serious player would apply their own choice of rubbers.
P E A C E. : )
Man came in and critiqued one of the finest and most high grade table tennis racket artisans in the world, as if he was saying to his local baker that he left the croissants for too long in the oven🤣😂
@@nicolasgoossens I won’t justify my comments with my life long experience, knowledge and qualifications. Anyone with the understanding of working with wood will know exactly what I have said and advised in my comment is correct and fair. As regards the local baker remark, I worked in a baker’s shop from the age of 10 to 15, so yes, I would notice if something had been baked for too long.
bro he don't speak english lmaooo
@@Sarcastitonea Did you mean to say ‘he *doesn’t* speak English’ ?
@@FUNKINETIK no serious table tennis player uses these blades or rubbers. u were on point with your criticisms. hats off to the business owner anyway, gotta make a living out there somehow. im sure that the rackets you can find in a western sporting goods store are going to be less playable than these.
Olá, i"am brazil. Vc vende essas raquetes que você faz? Se sim quanto que é? Pode envia-lá para mim quando for comprar. Sou novo e acabei de me inscrever e deixar like.
Very decorative, and a lot of skilled work. Would a professional use such a bat in his work though? That handle must be uncomfortable over time.
Bravo, me gustó el diseño y la línea de tiempo de fabricación. Por favor puede comentarnos que maderas utilizas?
XIOM/ VEGA made germany*
Lovely...i love playing table tennis.
O resultado é ESPETACULAR, parabéns...
Здравствуйте! Очень замечательная работа с деревом! Но!! Почему нет лака на ручке, или финальной обработки?! Ещё 1 замечание. Не доверяйте заводскому клею на накладках, в нем есть пропуски, или неравномерность. Со временем образуются мертвые точки, пузырьки, или накладка отходит. Добавьте своего клея, рекомендуемого заводом изготовителем накладки. (Сейчас это на водной основе) Так ракетка прослужит дольше, и ваше качество будет радовать владельца много дней или лет. :)
I trained as a toolmaker a long time ago ... your milling cutters need sharpening :-D (And a slightly higher cutting speed aka more RPM would probably help too). Apart from that: nice video
🤯Это прекрасно! It's beautiful 100000000000 like
와우..수제 라켓이라
탐나네요.
제발 너무 비싸지만 않기를..ㅠ
가격 잠깐봤는데 미쳤는데요...
@@쓸대없는디테일얼마길래요?
Going in progress I love the exertion 👍👍👏👏🥹
Very nice work of art and respect it. And also informative video.
Great work! Where can I buy this racket? And how much is it ? Is there anyone help me
The racquet look very solid and with good rebound control and speed. How much are you guys selling this one specifically?
Es una marca de raquetas reconocida? Yo solo conozco Butterfly
🙏🏻🥂 awesome... And interesting rubber choice
Such a beautiful product and process.
SUPPER😘😘😘😘👍👍👍👍👍
Omg never seen Vega Europe with factory glue layer. Is this Korean version?
Lasers always amaze me. So effortlessly burn the handle design.
Where can i buy my own design like this and how much will it cost? I love it.
Wao, it's amazing!!!! I want one.
Чудове відео і робота! Цікаво, а скільки коштує така ракетка???
Он их продаёт корейцам в Корее, вряд ли вам нужно знать цену)
What price is it for this piece of art . Never saw a wood casing , very unique.
BRAVO...Je ne verrais plus ma raquette de la même façon maintenant!
저도 국화꽃 예뻐서 소장용으로 샀는데 이렇게 유쾌하신 분이 만드셨군요 근데 탁구는 그렇게 잘 치지는 못하시는^^;;; 뭔가 언발란스한
Dat lijkt mij een fantastisch betje.
Ik denk ook dat daar een leuk prijskaartje aan hangt!!!
Hermoso trabajo ❤
Nice! Excellent work🙏🙏
Like før en setter i gang og bygger en sjæl
Ах, какая красота!!! Какое тонкое искусство!!! What is rubbers? ( Xiom Vega europe?)
Si, los cauchos son Xiom Vega Europa con tecnología de pegado fácil iSwitch
Dear Sir (GozipTong) ??? You're name -
I was touched watching you're video
On how you're bats are finely cut in articulate designs and artistic behaviour
It was beautiful and a precious moment
I would like to know 10:45s there was a
Dense cut out in the handles I didn't get or understand that ? And you're customised racquet holder is just a gem
I spent time cutting out 14" inch dough
Balls and Vega and I've never seen it up
Close and like this and how would you may get the pressing and prints that easy like I would say good job
Thankyou Steven James you're sub watcher
It's pretty common for a table tennis blades to have some cut out inside handle for weight balance. It shifts the balance towards the head, which give you more power and clearer feeling, but it's not for everyone because it makes entire raquet to feel heavier.
Wow! This is amazing. Beautiful work.
У меня ещё были некоторые сомнения, насчет вероятной стоимости этой ракетки между «очень дорого» и «невероятно дорого», пока в конце не увидел её футляр. После этого сомнения сразу пропали 😁
Около 300 долларов, как zlc доска стоит примерно.
가지고 싶은 탁구체네요 .대한민국 탁구체라서 너무 좋네요
Tradu text folosind camera foto
I like it with dedication and a lot of attention to details.❤ A lot of work.😇 What is the price of this palette?🤩
Men şunaka raketka goremyok malades ❤❤❤
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻 felicitaciones un verdadero arte la fabricación de las raquetas
I am little youtuber but I'm your biggest fan in this world love you all RUclips creators❤️❤️❤️❤️❤️...,,
It’s a piece of art! How do I get one from you in India?
This is a super blazing fast blade!
Amazing 👍👍👍
Yeah, but where did the plates for these rackets come from? the main thing of the blade is just there already. I mean, even 0.05 mm of any layer changes the characteristics of the blade significantly. I wold love to see how it’s done, and not just forming the plate and handle.
Alucinante 😊😊😊😊😊😊😊.
Только один момент, в итоге готовой ракеткой играют чайники без техники. Надо клип завершить хотябы правильным элементом, а то сомнение возникает, хорошую ли ракетку они сделали.
Накладки на ракетку по моему Xiom vega europe,весьма хорошие.Так что ракетка подойдёт и более прошаренным игрокам)
Играют работники скорее всего, поэтому да техники у них нет, но по накладкам не дешевым Xiom Vega europe понял, что и основание тоже должно быть хорошее. Не понятно правда из каких пород дерева оно сделано.
Обычная ракетка, ничего особенного от неё не ждите. А накладки которые вы оцениваете по стоимости - типичный ширпотреб, не представляю кто из серьёзных игроков будет такими пользоватся.
Espetacular!!!! 👏👏👏👏🇧🇷🇧🇷🇧🇷🇧🇷
Honestly this looks beautiful
To be honest I don’t care much for the blade but the case is beautiful
КТО ТРУДИТСЯ РУКАМИ И МОЗГАМИ, БОГ В ПОМОЩЬ ВАМ 🙏🙏🙏🖤🖤🖤
Beautiful Paddle built by a Craftsman!
Wow iwant 1 but i dony have money to buy a table tennis racket like that..
عمل حرفي متقن وجميل تسلم الأيادي التي صنعت هذاالمضرب أخبرنا عن نوع الخشب المصنع من المضرب وشكرالكم🌹🤲🌹
everything looks so meticulous expect for the way the did that red and black paint. I chuckled a bit.
Can I make an order?Do you sell your products on the market? If yes,how much for one? 5 pliers or 7 off pliers?
Please don't just hand-paint random brushstrokes and then Lasercut the wood like that! Why didn't you resin/lacquer the handle afterwards to prevent dirt buildup in the gaps.
Using a scoring cut before making the full-depth plunge cut will help with better edges.
That T-slot in the handle is STIGA MARKETING BS! It makes the blade vibrate even more losing the precise touch, causing poor balance and lack of feeling from the handle! THIS IS MAIN REASON I NEVER BUY STIGA!
Also PU-Varnish is a good decision, but again why didnt you PU Varnish AFTER paint?? Wouldn't the paint just come off the below previous PU Varnish layer ???
I hope you are not one of those cheap chinese imitation manufacturers.
@@TurnRacing It looks good, but that's just all
I think STIGA’ｓvibration is good point,but it is bad work. It isn't major maker ptroduct. I wonder this was a racket made by XIOM... Only good point is looks,,, Others are all bad ,,,
If you care that much make your own
@@QYXP way back in 1977 when I was 13 years old wanted a skateboard with a kicktail at the front as well as the back, there was nothing like that about and so I made my own (and one for a friend) by making a wooden mould and laminating thin layers of plywood together. Guess I should have started a business with my design, it wasn’t until the 90’s that skateboards began to look like the one (two) I had made.
P E A C E. : )
Красива. Особенно чехлы.
vợt bóng bàn này chắc để lưu niệm thôi ..
Which side is used for defending
The red side or black side?
Отличное видео)
what kind of rubbers are these where you don't need to apply glue?
Applying glue is necessary when attaching rubbers to a blade but i know 2 rubbers that have factory-applied glue layers; DHS Hurricane 3 NEO and Yinhe Big Dipper
You're welcome 😊
I love that holder with Korea Gimchi color.
고집통 저도 이거 쓰구 있는데 손맛이 죽임니다~
라켓이 휠 것 같은데요
Amazing what a man with just an iced americano can do.
Super cool video
why silkscreen the wood only to cover it up with the rubber?
멋지네요~
Olá, como faço para adquirir uma raquete dessa?
What is the paint applied to the tree, I wonder what color it is called?
영상잘보고갑니다^^
Mantap 🙂
sangat bagus...bolehkah aku mencobanya 👍
yep, 75% of work in making tt blade is decorative. 75% of the price is marketing margin. anyone can make basic super zlc blade with a plain handle at home for ~30e (instead of 140-240e sold by big brands), and it's that expelsive 'cuz you'll have to buy at least 10 sheets of core and finishing wood and 100x30cm carbon sheet. making 5 blades form a minimal ali-e pack would make your blade cost you like 10euros (and max 1h of work (minus night hours of pvc glue drying out). and if you're lazy, just buy 5pl basic 5pl cheap chinese 10e blade, and clue carbon and hinoki/aouys ply to it, i've done it 10 times, makes you just fine off+ outer carbon blades out of dirt cheap stuff. take a def wooden blade, glue your plies and thicker outer ply, it'll feel like a nice inner carbon. plus, oversized def blades can be cut into cybershape hex style.
I just came back to a game after many years because I got inspired with off sett handle which is more formal approach to hold rocket with off set wrist
What pen paint do you use?
Is the rubber pre-glued?😮
Where we can buy this racket?
我的球拍也是自己动手制作 哈😂😂 木片的厚度与胶水性能很讲究 😂😂😂
Piece of beautiful art
옛날에 한때 많이 썼죠.지금은 버터사 하리모토 써요.~요즘에도 가끔 라켓 홍보문자 오네요.
Very interesting topic. Initial music too pompous for my taste.
Que coisa linda mano, sonho ter uma dessa!
gurizada é foda
@@gener0s0 KKKKKKKKKKKKKKKKKKKKKK
The music ruins the atmosphere of the video.
Calm and precise work being shown, with such fast and frantic music doesn't work.
Terbaik
Salam.sukses bersama
Salam satu.meja biru