This is my favorite youtube channel. What CJ does takes great skill and I like how there's a lot of variety in the bikes he builds (not to mention cars). Anyone can buy a new bike and replace a lot of stock parts with aftermarket parts and call it a build. What CJ does is a REAL build.
2024 wish list 4k camera? Would be great to kick back and watch this on the big screen videos are just about the right tone of chill :D Good work man keep it going
You had me dying when you dropped the intakes and gave the camera that look 😂😂 love the channel man just started watching you a couple months ago. Been going further back and watching all the builds
I'm really fascinated by your RUclips channel. You can make incredible recoveries and precisely with the bikes that I like the most. Unfortunately here in Europe there are no these types of auctions. Congratulations on the excellent work AC Portugal
Check you rear brakeswitch, seems like that one is working the wrong way. Front brakeswitch is working as it should. Check with resistance on the front brake switch and then the rear. They should work the same way.
Regarding break light issue, the problem with a missing sensor/ malfunction sensor that trigged by brake lever, this sensor usually found attahced beneath brake master cylinder and trigged by brake lever.
So on aprilia the previous owner actually told me that the front brake lever actuates the rear light through brake pressure in the abs module... isn't that DOPE!
The white 3 prong connector is not a GPS sensor....it is a diagnostic port. It is otherwise unconnected. If you look at pg. 120 of the RSV4 Service Manual there if a photo to confirm this.
it seems like the break issue is down at the rear brake lever, if you unplug the the rear brake from its connector and actuate the front brake the light should work and if does work it means the problem is with the rear brake switch down at the lever or your rear brake switch is stuck in the close position when release, the switch which can be taken apart and clean if you want to go that route or just get a new one.
The red wing on the ’passenger seat’ looks off with that seat you put on. Any possibility to make that carbon as well? (Watched the vid without sound, sorry if you already mentioned that).
Hi Thanks for the great videos Is there a way you could turn the music volume down as it louder than you and I have to keep turn the volume up and down Cheers
Hey so I have been riding sports bikes for awhile but recently I’ve been eying some scramblers. Would you ever consider fixing one up?? I’ve scene the R Ninet BMW, the XSR 900 and so one. Retro look you know. You can can get creative with the seats the. Make them real leather. What do you think ??
It's not for a GPS antenna that comes with the bike. Aftermarket parts you can buy. PZ Racing makes them. It wouldn't have been ripped off in the accident.
I have a 2022 RSV4 I just put track fairings on, tried to wire aftermarket brake lights for quick trips on the road and having same problem as you with the light going off when I hit the front or rear brake. So really hoping you can figure this one out for me
Hello sir I am from India and I am very inspiring from your work. I 💕 love your video so moch. A my big dream is to work with you and learn. I really love it sir thanks you so much 🥰🥰
I am parting out the street bodywork for my 22' RSV4 in this same color scheme. Going full track build. Let me know if you need any parts. Located in the U.S.
![A DAY with Maverick Viñales [4K]](/img/1.gif)
Where are the Italian calipers when you need them? They would have matched that seat cover. 🙂
🤣🤣🤣 legendary comment
Na dude those calipers just didn’t make the cut.. in my opinion
@@cableguy6843 I know bro, I was being sarcastic! 🤣
@@CJMediaOfficial hi bro , can you do rebuilt a bike for me ? 😊
hm😢🎉gcucfv😅😮😮
This is my favorite youtube channel. What CJ does takes great skill and I like how there's a lot of variety in the bikes he builds (not to mention cars). Anyone can buy a new bike and replace a lot of stock parts with aftermarket parts and call it a build. What CJ does is a REAL build.
Bro I be honest with you red seat is 10 times better than that seat cover
Hard disagree my bro
New one def fits looks better. Whats with all the loose fabric though? @@CJMediaOfficial
💯 that seat cover you put on is not the move.
Sponsors pay the bills I guess 🤷🏻♂️
I think the aftermarket seat cover looks better. The red one is too loud and too plain.
2024 wish list 4k camera? Would be great to kick back and watch this on the big screen videos are just about the right tone of chill :D Good work man keep it going
The repairing of the wiring on this beast tells that nothing is impossible. Great work dude ❤️🔥
You had me dying when you dropped the intakes and gave the camera that look 😂😂 love the channel man just started watching you a couple months ago. Been going further back and watching all the builds
Recently reupholstered my Ducati seat. Secure the front. Pull tight and secure rear. Then stretch and secure the sides to avoid wrinkles.
I'm really fascinated by your RUclips channel.
You can make incredible recoveries and precisely with the bikes that I like the most.
Unfortunately here in Europe there are no these types of auctions.
Congratulations on the excellent work
AC Portugal
Carbon swinging arm covers leave people in doubt what your trying to hide , Aprilia swinging arm is a work of art best left uncovered.
I got nothing to hide, I showed you guys me putting them on
Don't you know? If you put lots of carbon parts on, even when not necessary it gives you 20 extra horse powers.
Got some sparks going by the turn signal at 13:06
Great videos! one of my new favourite channels. Watching from Ireland
😂 rebuilding a wracked staple gun 3:14 lol… you rock bro!
🤣🤣🤣🤣 new series starts soon
Amen
Check you rear brakeswitch, seems like that one is working the wrong way.
Front brakeswitch is working as it should. Check with resistance on the front brake switch and then the rear. They should work the same way.
The new seat came out sweet and I love the carbon parts.
Love that the Aprilia is back! Make more Aprilia V4 videos please🙏🏼😂
It’s coming together!
Loving the Aprilia build ….
That bike 😍
Thanks CJ! What a mechanic you are!!
That custom seat…no bueno, better red
That seat cover is sweet ,and pops for sure
Love your work dude keep these beauty bringing back to life ❤
You have a lot of patience digging theough that wiring lol
Your seat cover is very loose you gotta put the cover in the dryer for a min or so until it’s warm and stretch it then staple..
That's a fantastic idea
Regarding break light issue, the problem with a missing sensor/ malfunction sensor that trigged by brake lever, this sensor usually found attahced beneath brake master cylinder and trigged by brake lever.
So on aprilia the previous owner actually told me that the front brake lever actuates the rear light through brake pressure in the abs module... isn't that DOPE!
That bike sounds amazing can’t wait to see the finished product💪
You are moster for mechanis congratulacion yuor work l from Colombia
The white 3 prong connector is not a GPS sensor....it is a diagnostic port. It is otherwise unconnected. If you look at pg. 120 of the RSV4 Service Manual there if a photo to confirm this.
Cj the best channel 🎉🎉🎉
50/50 on the seat cover, but you got options now. Great content
You are keep.all detail is so good. You are so professinal man.
Yea those Tappezzeria seat covers are pimp juice! I got one on my 17 RSV4RR!
Seems like the rear brake light switch is backwards confusing the main harness.
Tekarbon is also great!
역시 RSV4 사운드 👍
Finally the first!!!!! Awesome job and videos by the way
it seems like the break issue is down at the rear brake lever, if you unplug the the rear brake from its connector and actuate the front brake the light should work and if does work it means the problem is with the rear brake switch down at the lever or your rear brake switch is stuck in the close position when release, the switch which can be taken apart and clean if you want to go that route or just get a new one.
So I may have forgot to include this clip but I did unplug the rear brake and the brake light still illuminates. Which is throwing me off
Hate to say it but that seat cover isn’t good not sure if it’s the fit or it needs pulling way tighter? Awesome as always though CJ 🍺🏴🔥
It can be brake light switch which is causing brakelight go turn on all the time
The older Arrow gun tackers were built much better it would seem. Seat looks really nice too.
Excelente video te sigo desde 🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱
Dream bike...❤
Cj use some spray adhesive before stapling the tappezzeria in. it will help you out having 0 wrinkles.
The red wing on the ’passenger seat’ looks off with that seat you put on. Any possibility to make that carbon as well? (Watched the vid without sound, sorry if you already mentioned that).
yooo cj im wondering what kind of camera do you use to film?
Did you check plug on the rear brake
Awesome note off that exhaust ❤
I would love to see you rebuild a wrecked zx-14r. Please make my dream come true!
Que hermosas motos te felicito con la restauración quedan como nuevas muy bueno
Hi
Thanks for the great videos
Is there a way you could turn the music volume down as it louder than you and I have to keep turn the volume up and down
Cheers
yes i was bummed for what i though no upload because you usually upload earlier than this yayyy
Hahaha suprise! Sorry I usually do upload sooner
keep going bro you are the best
Pillion your pronounce was bang on mate! Have you tried disconnecting the rear brake light switch and just using the front brake and vice versa?
Brother I will suggest you do plastic wielding on the tap. It makes it so strong 👀 I’ve done it before lol
That seat is nifty bro 😎
Hi from Costa Rica, awesome videos!!!
The red seat looks better in my opinion...but this one is fine.
Keep going bro you are the best Good work ❤❤❤
Got so hyped for that seat cover went to order one for my 05zx6r and they don’t do that year dang it!
Man! That's a bummer to hear
Its was good if the sit colour is red
Dude pretty sure that connector without a home is the ECU data port It is on my 2017!
I really love your work man ❤
💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾
Great job best wishes
Hey so I have been riding sports bikes for awhile but recently I’ve been eying some scramblers. Would you ever consider fixing one up?? I’ve scene the R Ninet BMW, the XSR 900 and so one. Retro look you know. You can can get creative with the seats the. Make them real leather. What do you think ??
I need that Kia stinger rebuild finished ASAP pleaseeeee
It's not for a GPS antenna that comes with the bike. Aftermarket parts you can buy. PZ Racing makes them. It wouldn't have been ripped off in the accident.
Let's go! 🎉
hello from Brasil, good job 🇧🇷
Use a heat gun when installing your seat cover. You'll get all them wrinkles out.
Should get some carbon air intakes would look very good on the bike
Fala ferruge tem que ter cuidado com as conequiçao por conta do zinapre -nos fuziveis!
Great work!
I have a 2022 RSV4 I just put track fairings on, tried to wire aftermarket brake lights for quick trips on the road and having same problem as you with the light going off when I hit the front or rear brake. So really hoping you can figure this one out for me
The connections the rear brake might be reversed
Yes leds lightup only one way
go go go 170 k
Mano, coloque a capa do banco original, essa tirou o brilho da moto!😢
3:12 STAPLES REBUILD?!?!
Good work 👍👍👍
Pretty sure on the brake light, 1 wire is from the front lever, 1 is from the rear and they have a common ground
Hmm so what powers the Day time running light?
Matte carbon fiber is well deserved for this italian masterpiece. Not china fairings or crap parts. Its a V4!
Hello sir I am from India and I am very inspiring from your work. I 💕 love your video so moch. A my big dream is to work with you and learn.
I really love it sir thanks you so much 🥰🥰
Man, I realy love your videos... but those seat covers man, IDK
😍😍😍💯
Where did u get the air intakes I’m also rebuilding my rsv4
Love you ❤❤❤ like a bro
CJ how many pins does the rear brake switch have ? If you have 3, that may be the cause of your problem.
I think rsv4 sound almost like r1m, but r1m more good
Red seat 10 Times better
4:13✝️
❤❤❤
I am parting out the street bodywork for my 22' RSV4 in this same color scheme. Going full track build. Let me know if you need any parts. Located in the U.S.
Hey man can you please dm me on insta? At c.j.media! Thanks
thank god those white intakes killed me
The bike sounds amazing! And it seems RM1🤔
idol more vlog two comes
Love you cj one day i well come from your shop love from Pakistan
can you Rebuiled h2?
👍👏
Niice, that seat cover does not fit perfectly
Objectively, the red saddle was much more beautiful 🥰