Rebuilding A Wrecked 2021 Kawasaki ZX10R (Part 2)
HTML-код
- Опубликовано: 7 сен 2024
- She fires right up!! but what in the world could that loud clicking noise be??? What a huge sigh of relief though, now we can just go ham on this frame swap, boy am I EXCITED!! thanks for watching!! Cheers
Hoodies: cjridesslow.com
Cardo
20% discount code: CJMEDIA
10% Discount Code: CJ10
RPM Carbon: www.rpmcarbon....
Bren Tuning Code: CJ 5% OFF!
brentuningmoto...
PO: Box
1715 Linnerud Dr. 467
Sun Prairie WI 53590
Instagram: c.j.media
Email: cjmedia.connect@gmail.com
Merch (LIVE!!) : cjridesslow.com
You were right, this gonna be the most expensive and interesting bike rebuild yet, it's really smashed like crazy... wonder if the previous owner got all bones intact,hope so.
I hope the previous is alive and well! Havnt heard anything from his contact yet, hoping to hear something soon!
Noise you are hearing in the front is an exhaust leak somewhere in the headers. New exhaust headers will fix the issue. Besides that, the engine sounds good. Forks will have to be run on a dial gauge to see if its straight.
Thanks slaki! Appreciate the info!
The damage is absolutely nuts on this one, hope the previous owner is doing well. Can't wait to see how this rebuild turns out! Much love and God bless CJ!
Yes it is is BANANAS! Me too, I have reached out but no word from the previous owners insurnace contact. Thank you hunner God bless ! 👊😁
&s
I got a trick for ya! Get a ladder and place it over the bike. Then use ratchet straps around the bike and through the ladder rungs to hold up the bike.
great tip!
Thank you Kevin! I'll have to give this a shot!
Love the rebuilds. I also rebuild copart bikes 10:13 as well. It’s always tough to rebuild a bike cause you never see how much damage is involved until the tear down
Thanks Craig! That's awesome you do it as well! Well done! And yes it's always the hardest part
This is deep bro! Serious learning curve, I hope you don’t run into too many problems. This ain’t nothing you can’t handle. Lookin forward to part 3.
Thank you Troy! Means a lot to me! It sure is a serious learning curve... 🤣
It's been awhile since I first following your video, and it's always fun to see you restore all the bikes. All the Bible verse that showed up at the end of your video always makes me relief, God bless you brother!
Thank you for the long time support friend! Yes the Bible verses are just a sliver of how great God is! God bless
The forks you can roll them on a flat table and usually you can tell if they're bent or straight. As far as the noise in the front of the motor check your cam chain tensioner or your valve Kawasakis are known for the cam chain tensioners. Mr motorcycle in Dallas Texas has a lot of parts they also ship world wide pretty fair prices on parts .
Thanks for the info Chris! Cheers
Another great build on its way.Happy Christmas and all the best for the new year
Appreciate your kind words Damian! Merry Christmas to you as well!
To check the forks, disassemble and suspend the stanchions and outers between some V blocks. Use a DTI to check for run out. If you cant do this or aren't confident, strip them down and take them to a machine shop. They will be able to check for straightness.
that ticking noise is likely just blow by on one of the munched joints on the extractors
Thank you for the info! I'll have to do that!
Love your builds 😊 support from India ❤️
😁😁👍
🇮🇳👊😁
That AC condenser is toast.
I never seen à frame broken Like this. Very interesting repair.
Thanks Marc! Happy to share it
Dope channel. I like you go straight to the project and not turn your videos into a portfolio about your self . Your camera angles are nice too
Much much appreciate Jonny! Cheers
God I wish I had the money to buy this bike. The zx10r is my dream bike. Really interesting to see how this bike is assembled. Thank you.
Go for it Mika! You got this
OMG!! I hope the previous owner survived the crash. Good luck with the build your doing fantastic!
Appreciate that Étienne!
If you roll forks on flat surface you should be able to tell if they're straight or bent
Right! But they aren't really able to be rolled
Good work,its breaking down well,I have changed many frames,also had many straightened together with forks,in this case I would go for a second hand frame from a Breakers together with forks and damper,the later I have had lock up on me after heavy damage,even if it looks good
Had to smile when I saw the snow, we just got a foot and a half. 😜❄❄❄
However you end up checking those forks please be extra "fussy" making sure
they are safe and in spec. Front forks failing would be bad..... Huge respect to
ya' for taking on a (re)build like that. Very much looking forward to how the final
product looks, rides and sounds.
Thanks for sharing and keep yourself safe! 😃👍❤🏍
Randy
Wow a foot and a half is glorious!
Yes you're right the forks are a crucial part and need to be perfect!
Very happy to hear your enjoying it so far randy! God bless 👊
@@CJMediaOfficial 😃👍
for the front fork you can test it after mounting the front wheel itself and before tightening the 6 head 2 bolt you should spin the tire see if it has curve, Look it from the up site it helps better look.
then gave it a pressure by pressing on your ignition. if it goes 3/4 good to go. Sorry about my bad English :P
Thank you for the ideas! No worries cheers!
I have brand new Z900 2022 and ticking too. I've heard that kawasaki has loud fuel injection system. You should CHECK THE EXHAUST MANIFOLD NUTS & BOLTS too, If those are lose, they'll leak sound of the engine parts working(clicking noise).
Might want to get that checked. My 2020 Z900 didn't do that.
Perfect sir! You have an awesome Z900! I will have to check that!
tuan apakah semua motor di garasi rumah anda adalah hasil restorasi?anda benar benar luar biasa mampu mengerjakan hal rumit semacam ini sedangkan saya baru melihatnya saja sudah merasa pusing di kepala 😁😁 selamat tuan sukses selalu untuk anda ,salam dari indonesia 🎉🎉
Awesome! One can see your LOVE for motorcycles.
Ever thought about opening a garage/workshop with some employees?
That beast when it started 🥲😍🔥
Ikr!MUSIC!!
Congratulations brother good video, a kawasaki was missing on the channel
Youre right brotha! That's why I got one haha
Its always a good day when cj posted seeing your videos keep me motivated to finish my 98 honda cbr build its almost finish hopefully by next week it will be on the road again
Thank you so much for the good content sick soundtrack and the motivation🙏🏼
Happy to make your day sir! Hope you get your bike up and going! Cheers man
Always follow your current developments....
💪💪💪
Really really appreciate that!
I don’t know if it’s been recommended yet bud but you should invest in some ceiling hooks to hold the bike up with straps will work a treat for you or a motorbike ramp.
You're right man!
that clicking was an exhaust leak. if i saw correctly there was a small puncture in the header right at 11:35 . when exhaust leakes it sounds like valves
Thanks for the info!
Man this Kawasaki is wrecked so hard!
She got smoked.....
Hey. Amazing video, this build is mega. In terms of the forks, you can look down them by eye and see if they are bent easily. Another check you can do is to back off the preload, and damping.. then compress the fork with body weight and see if it feels okay. My recommendation - send them off to a pro to be rebuilt, with new fork oil and seals. They’ll flag if anything is damaged, and also you could even get upgraded internals if you feel inclined. Best of luck!!
Thank you for the information Saqib! Only negative with sending them off is time, I just hope if I go that route it won't take a month or two. But that is a great idea especially since they are an important component
@@CJMediaOfficial Ah, I see. They could have another set on the shelf, that you could use as exchange.
Not sure if this has already been answered, but if you want to know if the forks are straight you can measure the distance between bottom of the forks where the axle sits, then turn the forks a quarter turn (one fork clockwise and the other counter) within the triple tree and measure again. Do that a 4 times. If the forks are bent then the measurements will be off. Not sure if that made sense lol.
I somewhat understood what youre saying Tyler I appreciate it, could you further explain where I am measuring from in noob examples 🤣
@@CJMediaOfficial Measure at the very bottom of the forks with the wheel off the bike. It would be the inner gap between the two forks.
Ticking Sound coming from the front is likely an exhaust leak from the small hole in the right hand side header. They often sound like ticking. It is unlikely to have valve lash out of spec at only 8k miles.
Thank you for the info Ryan! Appreciate it
Lots of work with this one, but you’re more than capable. You’re obviously sourcing used parts to replace the broken stuff. I’m looking forward to the rebuild! Happy Christmas!
Thank you for the motivation Lindsay!! Right I am! Merry Christmas to you!
congratulations for the work, despite the high cost of components and a lot of work to rebuild the bike
I m waiting from India bro. U r amazing bro. Too hardworking man i hve seen ...
Keep it up and all the best for ur future
Fork check- pull the shock bodys use a straight edge in 4 places around the lengrh of the body to check to straight. For the tripple clamp you would need the manufactures specs on it to check the degree( i would just replace the triple clamo if the shock bodys are straight)
Useful information! Thanks
father of sport bike back .
Yes it is!!
I unknowingly let out a 'wohoo' when the bike started🤣
HAHA that's legendary! Off camera I was jumping for joy!!
@@CJMediaOfficial you're doing amazing work cj keep going 🔥
id love that motor for a mini jet boat build... i wont be tearing down my clean zx10r for it tho! Ill look for a wrecked one for sure
Haha that would be cool! You have a sweet bike!
You lucky guy...snow right before christmas! Here in Greece...specialy central greece were i live we have 73 degrees Fahrenheit. Keep up the good work...cheers👌(that noise you hear from the front...is probably the exhaust has busted from the crash.)
Haha the snow brings out the beauty! Wow I would trade locations with you to ride my machines right about now 🤣 you're right man
Рыжик- смотрю все выпуски- я из России.С интересом буду наблюдать твою работу.Ты большой молодец.Успехов.
Motor sounds fine. That’s an exhaust leak your hearing. Pipes either cracked or it broke the seal between the header and the gasket
You're probably right!
I am more excited seeing the s1000rr at the last part.. how’s the limp mode?
Haha fair enough! She will be updated soon!
It almost looks like the first header tube (left to right) standing in front of the bike, has two small holes, causing an exhaust leak. That would explain the noise. Best guess after looking at the headers.
You're probably right! They will be changed soon enough!
Wow CJ, you're doing an amazing build but this one's way expensive than the previous ones!! Love your presentation. Happy Christmas and New year brother 🎈♥️
From India
Merry Christmas bro! Yes it's going to be expensive! Greetings 🇮🇳
All Kawasakis' make audible ticking noises. In your case though, I believe it's the exhaust maniford (header) leaking from the accident.
You may be right josh!
Love from India🇮🇳 bro 💓💓💓🤜
👊🇮🇳
Much love champ, all the way from India Bangalore 🤩
Cheers to you champ! 🇮🇳
That sound is probably that crushed header causing maybe some sort of back pressure maybe possibly a problem with the valves
Most likely!
absolutely love your videos man! keep up with the awesome work!
Very happy to hear sir! Cheers
The bike line up is insane 🔥🔥🔥
Haha thanks dean! So good to have em back
Thanks from Italy for your great job and videos!
Thank you Mattia! Greetings to you in Italy!
Awesome, and best wishes on the swap
Really appreciate your encouragement momo! Cheers
😇💞🏍Fantástico proyecto😍.Me ENCANTA como quedó la R1M ,uno de mis Sueños😍♥️😇
The only way to find out if your forks are straight is that you can dismount your forks from the triple tree and then roll them over on a flat surface.
That's a smart idea thanks!
yoo saya selalu menonton setiap perjalanan vidio mu kawan 😇😇semoga pekerjaan mu selalu sukses 👍👍
Greetings CJ. I like your channel. Which I accidentally found)))) Well done for restoring a wonderful creation - a motorcycle. Keep it up. You can see the light in your eyes and actions. To be honest, I envy you)))) in a good sense of the word. You are very lucky in this regard. Once I myself restored one of these. But ... by chance, life made adjustments. Don't stop, keep doing miracles))) P.S. good luck. Greetings from Russia, St. Petersburg. Merry christmas and a happy new year!!
Greetings friend! I'm happy you accidentally found my channel! Hope you are doing well with the adjustments life has made on you! Thank you for your kind words and likwise merry Christmas to you and a happy happy new year to your family as well 👊
SICK video! You should do a video showing some of your favorite tools that you use to rebuild bikes. Happy holidays!
Thanks bro! Sick profile picture you have! I'll have to do that some time! It's quite intersting the tools I acquire after a year of working on different manufactures machines, merry Christmas to you!
I hope that white smoke is nothing, just some cold start problem and not piston rings. Anyway very nice content, another build of yours that I need to follow. ❤️❤️ NICE JOB!
Appreciate the encouragement Niel cheers!
The damage on bike is not joke , hope u not frustated to rebuild it i think will be much cost to do it 🤙😎
Yeah it's some serious damage! But I'm up for the challenge!
Bro that's why i love your this kind of vedio😍😍😍
Wooohoo bro!
You probably are hearing an exhaust leak. Awesome vids :)
You may be right! Thanks Liam!
Wow. I like your video and work. Love from 🇮🇳 india
100k soon
Soooon!
it is very satisfying to see these projects. another interesting thing is what I call DIY, in portuguese; faça você mesmo or FVM. but unfortunately we don't have access to so many tools easily, the price around here is absolute. And a good tool makes all the difference! now let's see how CJ will do with this little broken. 😂😂
Hey CJ here I have a modified Z400, when will we have a half cc project?
and also sorry if my english is not the best🤭🤭
Glad you find it intersting! Thank you Hugo! Greetings to you and nice bike you have
8000 means it was actually used. Good for the previous rider. Going to be an interesting build this one for sure.
Right! He rode the machine! Thanks
Broom broom is coming soon😊
Haha I hope so
yes, watch again bro. Greetings, Indonesian friends ✋✋🙏
Greetings friend 🇮🇩
Merry Christmas bro. ✋🙏
Oh man... looooots of work ahead... That sweet ninja sound...
Yes Raki! Lots more work to be done! And yeah she sounds good!
First view, and comment from India 🇮🇳
Greetings sir!
the ticking noise is the exhaust headers, they have a hole in them! also, didnt think a frame swap was even legal? certainly wouldnt be over here in the UK
You're right Craig! Frame swaps are legal here in the US! Just a lot of paper work
This is gonna be a big build!! Can't wait to see how you go around it :) 😁
You're right Nikita! Thank you for the motivation! 😁
Thanks for this rebuild this will help me think if it is worth it to buy one...
Of course! Go for it
After seeing the total carnage , i knew the frame was suspect ...
Algo impossível de ser feito no Brasil kk,aqui,além do alto custo do frame,tanto por questões burocrático! Thanks bro ✌🏽
Suport from Indonesian 🙌
🇮🇩😁
12:08 looks like something is back 🤤🤤
Yourrreeeeee right Derk!! She is back
Great episode, looking forward to the next one.
Thanks rocket! Happy to share with y'all!
Again cool vid as per gonna cost a few penny's for the frame swap but always good to learn new things
Right Breene! It's going to be a big learning curve!
Could be exhaust leak at the sylinderhead. You get a funky sound then. Check that out 👌
You're probably right nikko! Cheers
yea, it's really beat up. Good luck ! 👍
Thanks man!
Congratulations 100k subscriber 100k family ❤️
Thanks a lot MG!! Cheers
Nice bike you fixed up
Thanks Luke
Those forks need stripped and stanchions rolled to see that they are not bent as that hit on the front wheel was heavy.
You're right
Ay the BMW is back? Nice👍🏼👍🏼💪🏻💪🏻
She is back!! Still broken tho
@@CJMediaOfficial I see.. Dealer can't fix it ?
I got 28k miles on my 21 ZX6R, I ride a lot
I like your job👍👍👍
Thank you 😁
Must have spent some time on it's side w/ the amount of oily smoke upon start up...surprised it even started... Kawasaki is some kinda company.. build the best engines by far IMO... they did long long ago employee local gals -seniors to hand port cylinder heads on their performance models ..the gals had touch w/ a grinder ..
yg di tunggu akhirnya upolad 👍👍🇮🇩
I have a question, does that new front have the same chassis serial number? because I understood that this chassis has a unique number for each engine.
Fantastic work, I really like your videos, I am a big fan of your work. Thanks for sharing. well done cheers ❤❤😊😊
Thank you friend! Cheers to you 😁
Love from India ♥️😍😁🤭 hii bro.... ... .
🇮🇳greetings David!
8000 miles a lot for a 2021? Have you considered the fact that it’s almost 2023? Not even 400 miles in a month? I’m glad people buy them to ride them.
good to see BMW again
Yes! But she is still broken
super zvuk a perfektní oprava
hello to you I'm a big fan of your videos I love the state of a wreck to come back in new condition as you are a great enthusiast and it shows on your videos I wish a happy Christmas from the France❤❤
Greetings to you in france! I'm glad to hear you enjoy them!
next content, fix the Kawasaki h2 motorbike bro🔥
That would be awesome but I may be all kawasakied out lol
you are doing great work my friend i love you by the way BMW did not go unnoticed 🖤😁👌
Haha the bmw update coming soon! Cheers
The bmw is baaaaack
Sheee is back! But still broken
@@CJMediaOfficial bmw dealer couldnt find the problem with throttle?