BUTTON/SWITCH SETUP TUTORIAL | EDGETX | MT12 [EN]
HTML-код
- Опубликовано: 30 июн 2024
- #radiomaster #mt12 #tutorial A brief tutorial about how you can configure the different types of buttons/switches on your Radiomaster MT12.
0:00 Intro
0:34 Setup and use the additional 2-pos-toggle switches on the front panel
3:42 Setup a simple push button as a 2-pos-toggle switch
8:00 Setup a trim switch as a 2-pos-push button
10:02 Setup a trim switch as a 2-pos-toggle switch
12:38 Setup a trim switch as a 3-pos-toggle switch
22:33 Outro
If you like my work please hit the like and subscribe buttons and if you wanna support the channel please feel free to buy me a coffee! Thanks!
www.buymeacoffee.com/arminrc - Авто/Мото
Thanks to 5his video I was able to program a electric switch to turn lights on and off. I was trying to make it way more complex than needed.
Thanks for watching!
This is a masterclass in MT12 programming! I will definitely use some of these features for some of my more demanding crawlers. I did use T1 for my winch because the throttle mix I used (enabled through LC2) wouldn’t let me use T5 like I wanted. Hopefully there is a way to decouple/re-assign throttle trim in the future.
Thanks! Lets see what version 2.10 of the EdgeTX firmware brings to us. This should be the first version that fully "supports" the MT12. By the way: if you like hacking around in the MT12 logical switches, I've got a new video coming up with some more funky s..t programming a 4-pos-switch.
Thanks for this video! Specially the “funky 💩”! Lol!!
You are welcome! 😉 Thanks for watching!
Awesome Video. I learned a different way to get a 3 position switch on the trims compared what I did. Looks like more then one way to do the same thing. Great Job! 🙂
Thanks for watching and the kind comment! I would like to learn about your method of doing it. Would you mind telling me a bit about it? Thanks!
absolutely legendary. well done
Thanks!
Great video. it's the first one I've watch that explains how to use the toggles used with the expansion module ( now titles FL1 and FL2) I've been trying to create something where i could flip a switch and limit the throttle to say 50%. I don't know how to do it yet but I'm hoping this will help
Thanks! Just create a 2nd mix for the throttle channel (usually CH2) on the mixer page. Set the 2nd mix to a weight of 50. Now delcare a logical switch (say L01), choose Sticky and for V1 and V2 set the switch SDdown (Arraw down). Go back to the mixer page and for the first throttle mix set the Switch to "!L01" (the ! is important), and for the 2nd mix set the Switch to "L01" (without the !). Now you are set to go! With "SD" you toggle between 100% an 50% max throttle.
MAAAAAN, Armin..., congrats to 1000 subs. Up to the next 1000...
Thanks! Yeah, it took some time but here we are!
Lovely video
Thanks!
Hey Armin and super in-depth tutorial 😊😊best wishes 😊😊
Thank you very much, John! The MT12 has so much potential to play around with it. The possibilities are just amazing (at least when you're into funky shit like that.😀 )
It was very helpful
Thanks for watching! I am glad that the video was of some help to you!
That accent is amazing 🤙
It is amazing that you find it amazing!
Great video. Anyone else have the mt12 not remember what they’ve made after a power cycle?
I’m trying to do a basic channel override using a logical switch.
Made a logical switch for the large button at the bottom of the remote.
Made a special function to override channel 1.
Tested and works fine. Then power off and on the mt12 and it no longer works.
Any ideas what I’m missing?
What do you mean with "the MT12 no longer works". How does the problem manifest itself?
I need this setting on T5 but with steps, I need this for a light controller. So it would be 0 10 20 30 40 and same in minus
Thanks for watching. Maybe my new video "Multi-Pos Switch Setup" is of some help to you!?
do you have any experience with traxxa modelss. i have a high trail blazer with tqi rx and a traxxas or light kit. i plan to change rx to elrs rx and use my mt12. is it possible to get the lights working as before because i lose the cablw that plugs into the tqi. it also comes with a cable thathas normal servo connectors on it that i can plug into elrs rx, any help would be great thank you.
Thanks for watching! Regarding your question about the Traxxas light module I am afraid that I can't help you. The problem is that I do not know the data which is sent to light module to set the different modes. Maybe someone here in the community does know it. Then it could be possible to replicate it with the MT12.
Thank you so much for this but could you help me understand how to use the P1 rotary dial to change the sensitivity and dual rate for my steering?
Thanks! Using P1 (or P2) for controlling the dual rate of a channel is currently not possible I am afraid! At least not without using LUA.
@@arminrc I got it working last night through special functions and mixing I think it was
I control the weight of the steering with P1 and the weight of the throttle, brake with P2.
Just found a way. Please give me a moment to test it all out. Video is coming ...
Sorry, didn't see you answer in time! Great to hear, but I can not see how you used a special function for this. In the special functions it is not possible to use the pots (at least as far as I can see and without using LUA). My way was by simply multiplying two mixes for the same channel. Thats it. Works lika a charm.
@arminrc Yay.
Thank you.
I've used OpenTX in the past but am still a beginner overall amd am trying to learn as much as I can.
Hallo Armin. Nur noch bitte in deutsch😉👍🏻
Tut mir leid, aber den Aufwand, die Videos in zwei Sprachen zu produzieren, werde ich mir wohl in Zukunft nicht mehr antun. Lohnt sich einfach nicht. Sorry!
@@arminrc kann ich verstehen. Schade.
Also ich finde das auch echt schade das das nicht auf deutsch ist!
In englisch gibts da eigentlich echt genug Videos.
Aber klar geht halt um die Klicks
Danke für den Kommentar! Nachdem ich eure beiden Bemerkungen gelesen hatte (ich beziehe mich auch auf den Kommentar von andreass), habe ich relativ lange überlegt, ob/wie ich euch antworten soll. Verzeiht, wenn es jetzt offen und ehrlich wird.
1. Ja, es geht um Klicks! Warum soll man ein Video machen, welches keiner anschaut?
2. Zu diesem speziellen Thema (speziell das Programmieren eines 3-Pos-Schalters über den Trim-Switch) habe ich noch kein Video gefunden, weder auf Deutsch, noch auf Englisch. Über einen Link zu einem Video, in dem die gleichen Themen behandelt werden, würde ich mich freuen. Bin immer interessiert, wie andere div. Dinge umsetzen.
3. Ein Video in zwei Sprachen zu machen bedeutet schlicht und einfach auch den doppelten (Zeit-)Aufwand. Und bitte nicht glauben, dass, wenn ein Video 20 Minuten dauert, es dann auch nur 20 Minuten dauert, es zu erstellen!
4. Wenn jemand der Meinung ist, zu diesem Thema sollte es ein Video in Deutsch (oder irgend einer anderen Sprache) geben, so bitte, einfach machen! Niemand hindert euch daran.
@@arminrc kann dich verstehen. Aber wie du ja weisst gibt es keine deutschen Videos dazu. Vielleicht hält es viele vom Kauf einer mt12 ab. Weil man nichts auf deutsch dazu findet. Könnte ja sein das wenn du Videos dazu machst es mehrere Leute geben wird die sich eine kaufen und deine Videos schauen. Aber ich kann das Thema Zeit sehr gut nachvollziehen.