Thanks for this video. When I originally put the Dome Glass protector on my wife's Pixel 8 Pro last week there were no videos to be found. A couple of days later I found your vid where you did the comparison with several protectors, and now today this one exclusively for the Whitestone Dome Glass. As far as I know, yours is the only install vid available @ this time & it was very well done. I would love to see you do a drop test also. I've wondered if the glue under the glass makes it stronger for breakage. Perhaps you could test it with the protector you just removed & edit it into the video? BTW, the glass lifted on the lower RH corner of my wife's phone 2 days after it was installed, so it looks like I'll be using the 2nd protector as well...
Great content. I just replaced my screen protector. The one I had on lifted in one of the corners. I used the 2nd Whitestone dome glass screen protector for s23 ultra. But this time, I did it a little differently. Instead of using one vile of adhesive, I used one and a tad more from the 2nd tube, and it really covered. Then, I dried it a lot more than normal. I did do the 15-second the after taking it out of the jig I did it for 60 seconds 8 times. I did this because I liked switching out my cases, and some like Supcase unicorn beetle pro or I-Blason Armorbox or poetic spartan will give it a hard time. But so far. No problems.
@@HighTechCheck would you be willing to share your reason for not doing so in the case of the liquid screen protectors? Is it because the results would not be representative without the adhesive present? Thanks
Thanks for this video. When I originally put the Dome Glass protector on my wife's Pixel 8 Pro last week there were no videos to be found. A couple of days later I found your vid where you did the comparison with several protectors, and now today this one exclusively for the Whitestone Dome Glass. As far as I know, yours is the only install vid available @ this time & it was very well done. I would love to see you do a drop test also. I've wondered if the glue under the glass makes it stronger for breakage. Perhaps you could test it with the protector you just removed & edit it into the video? BTW, the glass lifted on the lower RH corner of my wife's phone 2 days after it was installed, so it looks like I'll be using the 2nd protector as well...
This was really helpful thank you
I have mild scratching a few days into having this applied . This glass is soft. I usually only keep my phone in my pocket without other objects.
Why no drop test? Sorry if I missed the answer in the video.
Great content. I just replaced my screen protector. The one I had on lifted in one of the corners. I used the 2nd Whitestone dome glass screen protector for s23 ultra. But this time, I did it a little differently. Instead of using one vile of adhesive, I used one and a tad more from the 2nd tube, and it really covered. Then, I dried it a lot more than normal. I did do the 15-second the after taking it out of the jig I did it for 60 seconds 8 times. I did this because I liked switching out my cases, and some like Supcase unicorn beetle pro or I-Blason Armorbox or poetic spartan will give it a hard time. But so far. No problems.
How does this affect the front camera quality?
Hi everyone! Who knows why there are transparent dots along the perimeter of the glass? 2 pieces on each side of the glass.
I find it odd that you always do the drop test but left it out?
I have never done any drop tests on any of the curved or liquid screen protectors.
@@HighTechCheck would you be willing to share your reason for not doing so in the case of the liquid screen protectors? Is it because the results would not be representative without the adhesive present? Thanks
The tempered glass cracked on the slightest fall inside my car. Not happy