I changed the tune on my B8.5 S4 | 034 Stage 2+ E40
HTML-код
- Опубликовано: 12 сен 2024
- After what feels like forever, I finally did my HPFP upgrade and flashed over to E40!
Stay tuned for part 2 where i get draggy times and my reaction to more power!!
Brave man doing it for the first time without an ECA!
Our cars do have a 16 gallon fuel tank. 14 up top and our reserve fuel is about 2 extra gallons. This is why it’s recommended that before you switch tunes to drive until the fuel range says 0 then drive an extra 10-20 miles.
Good to know!
I had the same problem with belt slip, 2 belts in 6 months... Did some research and got Gates Fleet Runner HD belt... It's made for commercial trucks so you will have to go on the site and find the size that is close to 1370 mm. You might run into finding the right size but too many ribs like 8 or 10. Just use a knife and cut off the ribs and install. You can do as much pulls as you want and no belt slip. I have my Gates Green belt on for 4 months and zero problems. Gates has a RPM belt but I saw someone on YT intall his and it shedded in 30 seconds after first starts.... you could order the belt at a truck parts store like Traction.
What camera do you use to record the video? Nice quality
Sony A7iv with the Sigma 24mm 1.4
One of the only guys I see running a jhm. I’m running a jhm sleeve on a fluidampr crank. So much better than 034 and ie for engine wear.
You didn’t show me much but are you using the original motor? How can you tell your belts slipping? Video explaining how to read our logs would be nice and um that smile you had told me your were gonna do something’s to any car that lined up😂
I got you in the next video! And yes original motor 126k miles
@@rafaelburgess8583 and it hold to an e85 tune huh guess I got nothing to worry about tuning at 89k
@@exoinky1293 I would say you have nothing to worry about long as maintenance is done and kept up on!
@@rafaelburgess8583 I’m not the original owner so it’s a gamble
@@exoinky1293 neither am I. I got my car with 108k miles
slap a water meth kit in 🔥😈
Thinking about it eventually
Demon, What nozzle are you running. Planning on switching to a 1000cc nozzle, 70/30 meth/water
are you dual pulley or single pulley?
Dual pulley (JHM 207mm crank pulley)
Do I need flex fuel kit for running E40 stage 2+
@@zhihengli8051 just a HPFP upgrade