Nice satisfying video, keep it up man! Im wondering if I need to replace inner joint, because there is some play on the left axle. My main concern is some clicking noise when reducing the gear or letting off clutch to fast
I need to do mine as I just noticed it dumped a load of grease on the undertray. Except I didn't know what it was until after I'd finished replacing my control arms, so now it has to come apart again 😔 I think it's easier to undo the three nuts holding the ball joint carrier to the control arm, I took the knuckle out instead and damaged the ball joint boot because I only had a fork type remover.
Hey,another great video for the v50,thanks.
Happy to help ! 👏
Great video! Where do you put the second jack?
in the same place just a bit further for safety.
Same as ford mondeo mk4 thank you
I know that some models of Ford are the same. Thanks for confirming that!
Well done.
Thank you!
Nice satisfying video, keep it up man! Im wondering if I need to replace inner joint, because there is some play on the left axle. My main concern is some clicking noise when reducing the gear or letting off clutch to fast
Hey , thank you! Yes it could be , you can check by taking of and taking a look inside .
I need to do mine as I just noticed it dumped a load of grease on the undertray. Except I didn't know what it was until after I'd finished replacing my control arms, so now it has to come apart again 😔 I think it's easier to undo the three nuts holding the ball joint carrier to the control arm, I took the knuckle out instead and damaged the ball joint boot because I only had a fork type remover.
Good luck with that!
Nakrętka od półosi jest jednorazowa. A tutaj kolega chyba tą samą przykręcił
Do you have to empty transmission oil before taking axle out?
No, it was full. The oil doesn’t come out .
@@slavicshop2398 is your's manual or auto?
@@erikas7892 manual
W tym przypadku gdzie oba przeguby są padnięte to się wymienia całą półoś bez takiego drutowania. Cała półoś jest tańsza niż dwa przeguby.
Nie udało się wyjąć sworznia , to odkręcamy całość ? Nie ładnie . Wypada mieć ściągacz .
Please write me in english. Thank you.
@@slavicshop2398 he ask you why you dont use special toll to replacment out joint.?
@@dawid31m Because I did not have one 😀