There's been several cases where the Mesh router doesn't provide all the bandwidth speed provided by the ISP. Regardless if connected through cable or wifi behind the mesh. But when tested from the ISP router the bandwidth is as should. Firmware upgrade doesn't help.
This usually depends on what WiFi frequency you are connected to. Is you are connected to 2.4GHz you are only going to get like 500 speeds but you also have to include walls and other frequencies so you’ll probably like 200. And on 5GHz you get up to 700. That’s what I’m getting. It also depends on what type of mesh you get I recommend a triband vs a dualband. Triband has an extra antenna giving the mesh system a better wireless backhaul Hope this helped
i’m using wi-fi 6 mesh extender for game getting 600-700 mbps but i’m lagging in game so i don’t what the problem is on ps5 using CAT 8 cable what do i do
What's the best solution for my WiFi/ethernet situation? The main router is on the other side of the house on first floor. I'm on the second floor.. I am using 2 other routers with mesh, but it is very unstable, crashes and lags a lot.
I just bought 2 linksys 6e hydra pro mesh router system. What an absolute nightmare to setup. I am usually fairly competent with computer hardware and usually I don't have any problems setting up a router. That is until I bought a mesh router. I am using dsl and yes I know it is slow, but it works for me most of the time. The reason I bought a mesh router was for its extended range, 6000 sq. Ft. Compared to 2000 sq. Ft. Of my previous router. My router is at the far end of my home so I need one with a long range. I don't actually need 6000 sq. Ft., but my TP-Link router kept dropping connection so I went with a mesh router. Setting it up is a nightmare though and I am still not sure why. Intially I had not Internet at all. Then I had Internet, but no WiFi. Once I was able to get WiFi working on one router I tried setting up the other node and everything dropped ou with no Internet again. I went back to the old router and everything had died including the dsl. I had to rest the dsl modem and wait for awhile. Finally the Internet came back. At this point I am not thrilled with mesh routers. I will call support and see if they can help. If not this router goes back to Amazon.
i’m getting that annoying issue red light no Internet no Wi-Fi nothing is showing up just a red light on my mesh. It happened out of nowhere again it’s a pain in the ass to fix and it’s really hard to fix and the way you have to fix it it doesn’t always fix it the first time do it you have to try multiple times and I forget how to fix it it’s irritating
I ended up ditching mesh and wiring up APs in every floor with a good old cable assigning the same SSID, a billion times better, ironically these are wifi routers from 2009 absolutely destroying Zyxel's mesh solutions.
HI Thanks, I am trying to set up my new canon E4570 printer with Mac Air and Deco x50 it worked for a week and then all my computers got disconnected. I see that printer is connected to wifi, computer had a discovered the printer but now disappeared again . Canon or Mac have answers could it be Deco system creating an issue? How to resolve it? Thanks
I have the nighthawk mesh 6 system with 2 satellites. Actually I have two. One at my home and one at girlfriends house. Both serve the primary function of connecting to wifi IP cameras. They work fine for a few days then suddenly it's like everything loses connection. One day it is one or two cameras not connected to the satellites. The next day the mesh is not connected to the wireless modem. I've read something about changing settings to static instead of dynamic addresses. So far I can't figure out which or what to do. I'm on wireless internet with cricket/AT&T and set up a MIMO antenna to improve my internet signal to the modem. Any help would be great. I'm tired and frustrated.
OMG my friend put a CARD GAME between my Router and the Mesh. If anyone notices a increase and decrease in lag make sure you have nothing in between the two mesh and router that is preventing from giving the Mesh signal! My internet is now stable. ☺
Hey man I have a question: I have a tplink deco mesh system ( 3 units ) It worked great since I set it up but then it started to go offline by itself I realized that if I reboot my phone everything goes back to normal. But it piss me off that I have to reboot my phone at least once a day everyday. I called tplink but they asked lots of info including my phone model and number n my internet service provider n password which I said NO. I'm not gonna give my internet password n my personal phone number n model to a Chinese guy. I'm not racist but they want way too much personal info.i already deal with Indian scammers on a daily basis I'm not gonna trust my personal info to a foreigner. So maybe u can give me an idea bout what to do. I heard in ur video bout disconnecting vpn if I have it n I do have it so I disconnected it. But maybe u can give me another idea bout what's going on n how to fix it. Thanks in advance man. T
I turned myself off in the control panel on my phone. And now I can connect but with out Internet hence why I have resorted to been a guest on my own wifi
Would you happen to know some good, free software that scans the wifi channels from neighboring routers? A lot of these programs are spyware or malware so I am kind of lost
I have the same system. Actually I have two. One at my home and one at girlfriends house. Both serve the primary function of connecting to wifi IP cameras. They work fine for a few days then suddenly it's like everything loses connection. One day it is one or two cameras not connected to the satellites. The next day the mesh is not connected to the wireless modem. I've read something about changing settings to static instead of dynamic addresses. So far I can't figure out which or what to do. I'm on wireless internet with cricket/AT&T and set up a MIMO antenna to improve my internet signal to the modem. Any help would be great. I'm tired and frustrated.
@aNuthaRedneck its built into the system. So you buy another one. I took mine to the geek squad and asked them to update it. The said tgey couldn't touch it. The update is on netgear website in a format my computer cant unzip. The netgear router cant understand the format either. I bought the top of line orbi syrem. It carries a 3 month warranty. We have to keep buying this junk just to keep your internet connection going
There's been several cases where the Mesh router doesn't provide all the bandwidth speed provided by the ISP. Regardless if connected through cable or wifi behind the mesh. But when tested from the ISP router the bandwidth is as should. Firmware upgrade doesn't help.
This usually depends on what WiFi frequency you are connected to. Is you are connected to 2.4GHz you are only going to get like 500 speeds but you also have to include walls and other frequencies so you’ll probably like 200. And on 5GHz you get up to 700. That’s what I’m getting.
It also depends on what type of mesh you get I recommend a triband vs a dualband. Triband has an extra antenna giving the mesh system a better wireless backhaul
Hope this helped
@@raphaelnunez8224 Is it normal to lose almost all your upload speed from the modem to the primary mesh node? How could I fix that?
@zak.stjohnWhat is the speed from your ISP?
i’m using wi-fi 6 mesh extender for game getting 600-700 mbps but i’m lagging in game so i don’t what the problem is on ps5 using CAT 8 cable what do i do
Was the issue solved?
Restarting everything one by one worked!
Thanks so much. The first step, to re-start the routers worked so well. LOL. worked like a charm.
What's the best solution for my WiFi/ethernet situation? The main router is on the other side of the house on first floor. I'm on the second floor.. I am using 2 other routers with mesh, but it is very unstable, crashes and lags a lot.
I just bought 2 linksys 6e hydra pro mesh router system. What an absolute nightmare to setup. I am usually fairly competent with computer hardware and usually I don't have any problems setting up a router. That is until I bought a mesh router. I am using dsl and yes I know it is slow, but it works for me most of the time. The reason I bought a mesh router was for its extended range, 6000 sq. Ft. Compared to 2000 sq. Ft. Of my previous router. My router is at the far end of my home so I need one with a long range. I don't actually need 6000 sq. Ft., but my TP-Link router kept dropping connection so I went with a mesh router.
Setting it up is a nightmare though and I am still not sure why. Intially I had not Internet at all. Then I had Internet, but no WiFi. Once I was able to get WiFi working on one router I tried setting up the other node and everything dropped ou with no Internet again. I went back to the old router and everything had died including the dsl. I had to rest the dsl modem and wait for awhile. Finally the Internet came back. At this point I am not thrilled with mesh routers. I will call support and see if they can help. If not this router goes back to Amazon.
i’m getting that annoying issue red light no Internet no Wi-Fi nothing is showing up just a red light on my mesh. It happened out of nowhere again it’s a pain in the ass to fix and it’s really hard to fix and the way you have to fix it it doesn’t always fix it the first time do it you have to try multiple times and I forget how to fix it it’s irritating
I get this aswell, do u or anyone have a fix ??
Any fix??
I ended up ditching mesh and wiring up APs in every floor with a good old cable assigning the same SSID, a billion times better, ironically these are wifi routers from 2009 absolutely destroying Zyxel's mesh solutions.
W I did the same but don’t know how to troubleshoot
I'm using static ip to connect to my node in linksys mesh. It used to take me to the node hub earlier which was far
I recently installed a mesh network with Asus Zen Wifi XD6. I've got a degree in networking and I can't keep this thing running. So frustrating.
HI Thanks, I am trying to set up my new canon E4570 printer with Mac Air and Deco x50 it worked for a week and then all my computers got disconnected. I see that printer is connected to wifi, computer had a discovered the printer but now disappeared again . Canon or Mac have answers could it be Deco system creating an issue? How to resolve it? Thanks
I have the nighthawk mesh 6 system with 2 satellites. Actually I have two. One at my home and one at girlfriends house. Both serve the primary function of connecting to wifi IP cameras. They work fine for a few days then suddenly it's like everything loses connection. One day it is one or two cameras not connected to the satellites. The next day the mesh is not connected to the wireless modem. I've read something about changing settings to static instead of dynamic addresses. So far I can't figure out which or what to do. I'm on wireless internet with cricket/AT&T and set up a MIMO antenna to improve my internet signal to the modem. Any help would be great. I'm tired and frustrated.
Hi. I have 4 xiaomi routers AX3200. i need a diagram with ethernet connection in mesh mode.
My mesh wifi usually becomes slow after few hours but when i restart the router and modem it fixes the problem why is that?
OMG my friend put a CARD GAME between my Router and the Mesh. If anyone notices a increase and decrease in lag make sure you have nothing in between the two mesh and router that is preventing from giving the Mesh signal! My internet is now stable. ☺
Hey man I have a question: I have a tplink deco mesh system ( 3 units )
It worked great since I set it up but then it started to go offline by itself I realized that if I reboot my phone everything goes back to normal. But it piss me off that I have to reboot my phone at least once a day everyday.
I called tplink but they asked lots of info including my phone model and number n my internet service provider n password which I said NO. I'm not gonna give my internet password n my personal phone number n model to a Chinese guy. I'm not racist but they want way too much personal info.i already deal with Indian scammers on a daily basis I'm not gonna trust my personal info to a foreigner.
So maybe u can give me an idea bout what to do. I heard in ur video bout disconnecting vpn if I have it n I do have it so I disconnected it. But maybe u can give me another idea bout what's going on n how to fix it. Thanks in advance man. T
I am the main user for my mesh and I accidently deleted myself. Now the only way I can use my Internet is as a guest.. can you please help
I turned myself off in the control panel on my phone. And now I can connect but with out Internet hence why I have resorted to been a guest on my own wifi
You can factory reset your system and set it up again
Would you happen to know some good, free software that scans the wifi channels from neighboring routers? A lot of these programs are spyware or malware so I am kind of lost
helpful. thanks!!
Dec x60 is a pain in the butt
I have come to the conclusion that mesh just sucks, it's a subpar lazy solution, i went with cabled access points, no more mesh garbage.
Solved my issue within 1.28 seconds, I had a vpn on my work iPhone which was causing slow speed
I changed my 5g routers, and now all mesh routers not connecting
P.s: i fixed it by changing the IPs , there was some routers with same IP and it conflicts.
Wtf is mesh anyway?
Get to the choppa!!
My mnetgear mr80 is crap. It is now unsupported by netgear and only 15 most old. No longer eligible for and update. Don t buy.
I have the same system. Actually I have two. One at my home and one at girlfriends house. Both serve the primary function of connecting to wifi IP cameras. They work fine for a few days then suddenly it's like everything loses connection. One day it is one or two cameras not connected to the satellites. The next day the mesh is not connected to the wireless modem. I've read something about changing settings to static instead of dynamic addresses. So far I can't figure out which or what to do. I'm on wireless internet with cricket/AT&T and set up a MIMO antenna to improve my internet signal to the modem. Any help would be great. I'm tired and frustrated.
@aNuthaRedneck its built into the system. So you buy another one. I took mine to the geek squad and asked them to update it. The said tgey couldn't touch it. The update is on netgear website in a format my computer cant unzip. The netgear router cant understand the format either. I bought the top of line orbi syrem. It carries a 3 month warranty. We have to keep buying this junk just to keep your internet connection going
This wireles Default password please