Soooo good man, I saw someone post a comment on the speed board videos "I'm totally making one for myself!" was so excited to click on this!!! love it!
Love how they went for the same aesthetic as your front forks, say... why dont you get those 3d metal printed? that five axis work cant be cheap :P beautiful machine...
Since you use flipsky controllers why not get one of the blue tooth remotes for the throttle n brake instead of a wired one, they are well worth it. They show current speed, distance traveled, how much battery left, predictable range left etc.
Dude, definitely switch it up, flip the wheels FR > RF. I think you’ll have more fun with a pivoting power wheel rather than that. Otherwise awesome build keep up the videos, they’re awesome!!
@Zero Cool I had to rewatch the video since it was an old post But yea I meant switch it up, Forklifts work like that, I know the turns won’t be as sharp. I’m hoping it feels more like surfing I could be completely wrong tho, 😂
First I like the hub motor. That might be used to recharge the battery on idle or downhill riding and it’s much more silent ride than the chain driven „speedboard“. NEXT is to think about the front wheel.. main to change the stabilization spring in to a „pneumatic damper“ maybe even automatically adjustible with speed. How about a little gyroscope, which would be only active on low speeds to keep the board level?
Awesome video, I built a Speedboard too, you can watch a video about it on my channel. It was quite an adventure to get to the (still not quite) finished thing.
Is that a real question or are you saying that like it's a bad thing? Either way you're totally ignorant to welding. SMAW is much more difficult to learn than MIG, is stronger than MIG, can be done outdoors in the wind and is the cheapest way to get into welding, hints why it's used so much in countries with less economic prosparity.
Bro bakit yung 350watts hoverboard wheel na ginawa ko hindi gaano makatakbo ng mabilis eh ung mga gingawa mu mabilis ung hoverboard converted to ebike ,
How many miles or km do you get off a charge with the 10s2p 36v 4ah battery? I'm making a electric scooter with a 16s4p 60v 4ah battery for a electric scooter and I'm looking to get 15miles.
@@albertnario4877 that's not bad for such a small battery, I'm going to experiment with some really crappy ~500mah Chinese power tool cells to see how far I can go off them before I build my actual pack
Наука
I love that you built this with a grinder and welder! I'm making a similar board right now with a mill, lathe, and drill-press.
Nice flexing lol
Soooo good man, I saw someone post a comment on the speed board videos "I'm totally making one for myself!" was so excited to click on this!!! love it!
Absolutely brilliant diy version. Thanks for sharing
Love this video! It inspired me to start building my own version :D
This is so fun to watch!!! Excellent work.
You got skills man! I enjoyed the build!
Very impressive initiative, keep making cool stuff 💪
Real DIY .simple tools and rusted material with amazing result.wow thanks for sharing sir.
Really nice build! It would be awesome of you to link to their kickstarter page or something to show your inspiration for it.
Super work & mind bro
Appreciate your hard work ❤️💪
How would you stabilize the leaning? Add a motor with a wire looped around it, and both ends of the wire attached to the fork?
Great job! Very impressive for a first try.
Love how they went for the same aesthetic as your front forks, say... why dont you get those 3d metal printed? that five axis work cant be cheap :P beautiful machine...
Max Maruszewski the front forks are 3D printed stainless steel 😎
... senpai 😍
@@speedboard. can you share a bit on the front geometry?
💯🇲🇽👌 excelente video, nuevo suscriptor, felicidades por el buen contenido del canal.👊🏼
Great project 👍👍... Maybe adding 1 more front wheel with same construction, will get more Ballance... 😊😊..
#Hello from Indonesia..
COOOOOLL! nice work
This project is dope
bat now ko lng nakita vids mo boss haha ganda tnx sa pag share!
Wow dude its awesome !
Have you tried it with no front steering? The turn radius would obviously not be as good but wonder if it’s still doable for most street riding.
Very nice video, respects
Maaan ,you are good!!!
Pls tell me detail about the front wheel machanism
Since you use flipsky controllers why not get one of the blue tooth remotes for the throttle n brake instead of a wired one, they are well worth it. They show current speed, distance traveled, how much battery left, predictable range left etc.
i don't have that time.
👏🏽 good job
Wooow. Am working on the same project
That is very cool. If you added some damping to the front end steering, you should be able to steer easier without having to overcorrect every time.
I think a stronger spring would do the same thing
Second title suggestion : Welding in flip-flops.
YEAH ! FROM THE PHILIPPINES 😍
I love how people who build this kind of thing always seem to have tons of rusty steel lying around
Nice bro
Через сколько отломалась переднее колесо?
Dude, definitely switch it up, flip the wheels FR > RF. I think you’ll have more fun with a pivoting power wheel rather than that. Otherwise awesome build keep up the videos, they’re awesome!!
@Zero Cool I had to rewatch the video since it was an old post
But yea I meant switch it up,
Forklifts work like that,
I know the turns won’t be as sharp.
I’m hoping it feels more like surfing
I could be completely wrong tho, 😂
Aynı fikri bende düşündüm. Fakat yön verme kısmını yapamamıştım. Teşekkürler
Super where you purchase wheeled motor attach
First I like the hub motor. That might be used to recharge the battery on idle or downhill riding and it’s much more silent ride than the chain driven „speedboard“.
NEXT is to think about the front wheel.. main to change the stabilization spring in to a „pneumatic damper“ maybe even automatically adjustible with speed. How about a little gyroscope, which would be only active on low speeds to keep the board level?
Can u make the front wheel two wheel?
I really enjoy watching your videos. You are talented and it’s great to see you recycle so much. Where are you located?
He is from the Philippines ☺
paolo d Ahhh...I suspected S East Asia. Thank you!
Awesome video, I built a Speedboard too, you can watch a video about it on my channel. It was quite an adventure to get to the (still not quite) finished thing.
What is the top speed ?
I am confused as to how this works without having rake in the front wheel suspension geometry tbh.
Ibaka talaga gawa mo sir
Please make a prototype of bajaboard the world's fastest eboard or make a bldc motor for electric skateboard
how to buy this wheels
Interesting, but it has very weak construction of steering wheel. And no suspension. It become broken very quick after riding on non-flat surface.
Nice project again LODI! 😁
when the cord gets caught in the wheel....
Link to the parts please
Your using a stick welder?
Is that a real question or are you saying that like it's a bad thing? Either way you're totally ignorant to welding. SMAW is much more difficult to learn than MIG, is stronger than MIG, can be done outdoors in the wind and is the cheapest way to get into welding, hints why it's used so much in countries with less economic prosparity.
It's a real question. I never welded before. No need to call people ignorant smh
Such a creative mind
👍😁 Где такие колёса купить?
half a electric skateboard?
Hero status
Don’t you need ball bearings for the front wheel, it should give you more accuracy when you turn.
Excelente brother
Bro bakit yung 350watts hoverboard wheel na ginawa ko hindi gaano makatakbo ng mabilis eh ung mga gingawa mu mabilis ung hoverboard converted to ebike ,
Отлично
pede poba gawa din kayo ng 3 wheel board... thanks
Good work,Are you in vietnam? I want to buy this).
lol stop acting as you'll buy it
Родион Яшников philippines
😍😍😍😍
Speedboard, ayer estaba viendo esos vídeos
U need more stronger springs
saan mu nabili ung motor na 800w 48v na kasama na gulong?
sa isang kaibigang mechanic binenta lang sakin 2nd hand.
Bro This tubes are aluminiun? 4:08
Galvanized
This should be rear wheel do a electric pit bike or electric go kart
How many miles or km do you get off a charge with the 10s2p 36v 4ah battery? I'm making a electric scooter with a 16s4p 60v 4ah battery for a electric scooter and I'm looking to get 15miles.
7 miles I guess?
@@albertnario4877 that's not bad for such a small battery, I'm going to experiment with some really crappy ~500mah Chinese power tool cells to see how far I can go off them before I build my actual pack
interesting 👍😸✅
It's a scooter for those who like skateboards lol
Did it cost you $2,000???
maybe $200 or less
U need wireless controller
it is a scooboard
Mas mababalance mo yan paps kung sa likod mo ilagay
mas ok yung sa harap.. hindi lang tlga ako magaling gumamit ng eks8b
Çok güzel olmus yaaa
Сделайте самокат самый. легкий..
kuya san ka nakakakuha ng mga lumang hover board?
carousel.ph mura lang 2nd hand
@@albertnario4877 aahhh salamat po. online lang din po o may store? thankyou po.
online.
интересно он сам до травматологии доедет?
Que pasada 😲💪🇦🇷
Galing! Pano icharge pre? May charging port? 👍👍👍
dun sa may kulay dilaw na connector hehe
speedboard now a trend even to diy'er..
yes, and it's expensive to buy, so I built mine.
than make this kind workout e scooter, u have all the parts i guess..
ruclips.net/video/qx8Q692-rDU/видео.html
ayos bro.
uo testing lang kung lumiliko tlga haha, pero yaman mo nanaman netong dec.
More like a handle less scooter
the fuq XDD
Albert do a voice over none of us will judge you even if you are not good at English
I did it in some of my video. maybe I try it again.
Привет, пришли мне кару колёс куплю
Ano ginamit mo na hub?ilang watts
yung sa scooter ko ginamit ko jn. nasa description.
that looks sketchy as to ride lol
Speed board
Ищешь русский комент? А его инет!!🤣🤣🤣
Oii99
You just copied somebody else’s design and changed it from belt drove to hubs.
please read video description.
Please make a prototype of bajaboard the world's fastest eboard or make a bldc motor for electric skateboard