Watched about 10 videos before this one but all seemed awkward. Your idea is the one I am going with! Simple and when you take the tarp down all the ugly hardware is gone. Thank you and well done!
I used to detail cars for a living and i worked at a large dealership at one point in addition to small shops along the way. I say that because of the suction cups. They will not provoke any issues or harm ur clear coat in any way,.Just wash ur suv and perhaps hand wax the areas were the suction cups are being applied just to keep up with the paint. Considering oxidation (Oxidation creates an ugly faded burnt apearance on the surface of the paint) will always effect the 3- tops on a car, hood, roof and trunk lid as they are the most exposed to the elements, on an SUV it will obviously effect only 2- areas hood and roof. It's so vital if u luv ur car to clean or treat the surface, this will also help the suction cups attach and hold better and slide less under stress should the wind pick up. Enjoyed ur vid another good economical diy project. Good stuff thx for sharing👍
@@JayWandersOut definitely whether you intend to keep or sell ur car its worth doing. It will maintain the value of ur car and it will continue looking good. Take care Jay.👍
You can also just use a single suction cup on the sun roof glass and then put a zip tie on roof rail. It will be a little janky but it will get the job done.
Add a small patch of clear adhesive film to each area for suction cup to protect paintwork, when you want to remove same use a hairdryer to remove, works fine, great video.
I'm glad I saw this video. I'm going to go this route rather than getting a real awning . I like how the put away is really simple thanks for the video
When you use the poles with the pointy end through the grommet, use the caps to keep them in place. Just in case you get that upward wind. Super simple, great video.
Hi Jay, great video. Thanks for sharing. As a suggestion for your suction cups, you might consider attaching them to your windshield and rear window. The cups are not likely to damage the glass and if they leave a little mess, that should clean off easily with glass cleaner. Just an idea.
But, like Jay Wanders Out said, it would then rub the top of the door on the tarp, spilling rain when it does. ... Maybe a modification to that concept, like an offset cone or a tube around the sup cup leash, would mediate excellently. There is this wrap stuff called "Body Guard" that is supposed to protect the paint of scratches and micro-dings, adhering that might be a more permanent application for protecting attachment points on the body, ...or applying extra wax, or a silicone-based protectant?
I did this on my Chevy Equinox and it worked perfectly! Even as a solo female, I had it set up in no time, and it stayed secure and tight the whole weekend. Thank you for such a well done video!
The lever activated suction cups work the same as the handles used to carry large sheets of glass when installing windows. Very strong and very dependable as long as the surface your adhering to is smooth and clean.
The suction cups are a great idea. You should know that on a super windy day, those plastic hooks can start to bounce and beat the metal, causing a dent on the roof. Think about wrapping foam or cloth around the clips. I had a plastic bungee hook tiedown hooked onto a tarp on my truck. The buffeting wind made the hook bounce so hard on the tailgate it left a dent. But I was driving at the time. Just something to consider.
Amazing! I was deep down a RUclips hole checking out DIY awning ideas and none I saw had the suction cup idea I was thinking of! So much more simpler than drilling, mounting, etc a heavy, long ass bar on the roof racks. I’ll try this out, thank you!
This was exactly how I saw it in my head- thank you! - you put it on video so I could show my husband the idea. But the use of suction cups made it even better!
Nice job. I watched many videos on awnings but none applied completely with my need for an awning that didn't have to be permanent. I didn't want to drill holes into my van and your idea of using the suction cups was a great solution! Thanks!
The suction cups are a good idea. Someone suggested fishing magnets (really strong magnets with eye bolts threaded into it) because I don’t have a roof rack. But I worry about them scratching, or my not being strong enough to get them off haha. Also someone else said harbor freight has telescoping painters poles for $8 but I’m not sure if the threading will fit in the grommet. Definitely worth looking in to though because they could be easily modified. I think I’m going to go off the back of my Jeep and have the sides go to the ground so I have a sort of privacy tunnel since I’m going solo. Lots of great ideas in the comments sections passing on here. Safe travels 🚗🏕
The painter poles usually have a plastic threaded fitting to screw into the paint roller handle. On the one's I purchased the plastic threaded tip was about 2-1/2" long solid plastic swagged into the aluminum pole shaft. I just drilled the end of the plastic fitting and inserted a pin made from a 3/8" diameter framing nail. Has worked great for about 15 camping events so far.
I have a 5th Gen 4Runner too and I just purchased the Green Elephant telescoping poles to set up a awning also. Don’t have the suction cups however. I’ll try to work around that and use the basket rack itself but may end up buying them too. When the awning is set up it changes the whole feel of camping vs parked out in the middle of nowhere with just your vehicle doesn’t it. 😎🤙
Basically I use the same set-up on a minivan. I have a wooden rail attached to the roof rack with hooks for each grommet for the vehicle side. I only set it up when I know I'll be stationary for at least a couple days. When I do use it, it expands my living area and nice to have.
Exactly what I needed to see as I'm planning on using this setup for working in my engine bay in the sun. You make it look easy. Top job. Cheers from Australia subbed and liked 👍
I really like the suction cup idea 💡! Thanks! On the DIY side of things one can use extendable paint poles they dont pack down as small but setting one up will keep you well under $20 for 2 poles. 4'-8' expandable painter pole from Wal-Mart $7.42, Stainless Lag bolt from Home Depot $0.49. Drill a hole in the threaded end of the painters pole smaller than the lag bolt so you get a good grip and it bites. Thread the bolt in then remove it. Holding the pole horizontally I fill the hole with hot glue i can usually get 2 small sticks of low temp mini hot glue sticks in. Before it sets thread the lag bolt down so there are no threads exposed and rotate the pole to a vertical position with the lag bolt down to allow the glue to set around the lag inside the pole. Alternatively you could use epoxy instead of hot glue. I leave my poles like this because I use tarps with straps on them. But you could easily grind the head off the lag for a traditional looking tent pole.
Genius! Just got a 4Runner and looking for some adventure. Your solution isn't just economical; it's also very efficient for saving space. Thank you for sharing - God Bless.
The suction cup is really a new thing to me. Thanks for posting! I have another solution fro the poles however i use the poles you use for painting with a roller $7 each. just put a pencil in the top hole and the grommit.
Thank you for posting this video. I am a hammock camper and I made myself a nice bug screen cover for my hammock called a fronkey style bug net. so I got to thinking how hard would it be to make a bug screen porch for an awning. Go to your local Walmart and look for mainstays brand sheer curtains, each pack of curtains cost about $4 and there are two panels in a pack. I suggest you buy the tallest set of these curtains. You will need about 4 packs total to create a nice protected screen porch from mosquitoes and other flying bugs. I hope this info helps. I am currently building my rear hatchback screened in area that I can attach with magnets. Your suction cup idea is a game changer for me because I did not want to mount an extension pole on my roof rack. I just bought 2 sets of the suction cups a total of 4. Make sure if anyone tries this method and to remove the plastic sheet on the suction cups. There is a plastic sheet to protect the cups from debris. They have to be removed or you will not get good suction.
Good ideas. I've also encountered a problem where in Bighorn National Forest all these tiny green bugs kept landing on my bug screen so they'd get in when I pack things up. I have concentrated permethrin with me so I made a solution then soaked all the netting. Now no bugs ever sit on the netting for more than a second or so. Permethrin is magic. I've always treated my hiking clothes with it but I'll treat my netting regularly from now on. You're so right about the protective film on the suction cups. I hope everybody remembers to do that.
I made a diy rod for our tarp....went through all that and few months back saw these similar cups on Amazon.. I use 3 suction cups and two extendable poles like yours.... They work nicely
Really good and clear presentation, and I love the suction cups. I have a smooth fiberglass topper with no racks, and I've been struggling to figure out a way to attach a tarp to it. Suction cups are the perfect solution.
I guess to be fair those expensive ones will hold up to much stronger wind but I heard the UV eventually always does a number on the outer bags and I didn't have a good safe way to mount one to my roof rails. I do think many people get the big awnings though to make themselves stand out and look the part.
Our first time camping with our new SUV. This is a great idea since I do not want to connect anything to it permanently plus I like to put it sometimes on the backside or other times on the side of the car! Thank you Jay!
This was a very helpful video for me! It answered all my questions and gave me a great way to make an inexpensive, but high-quality awning for my van. Thank you so much for sharing this!
thank you for sharing! worked flawlessly for me. I just started overlanding and I am slowly building my gear. eventually I will buy an ARB 2500 awning but for now I will settle for this set up. I showed your link to a couple of my friends and we did our awning this way. We had a bunch of people inquiring about your set up. thank you
Nice, Chris! I've continued looking at ARB awnings but without installing a new roof rack it seems like most attachment methods aren't suitable for off roading. I'll probably just stick with this for a while to come since it all stows away out of sight. I only use it when it's going to rain or it's sunny anyway so it's convenient to have. It's also convenient because you can set it up on either side as you need at a particular time. I'm glad this helped you and your friends out!
Thanks for this Jay! I really like your solution with the suction cups and am going to use it for my Eurovan. The rainy winters of the PNW can't keep ME indoors!
Genius. I made a slight modification and it works perfectly. Also you can place a pole in the middle a bit higher than the car and the water runs off when it’s raining. My tarp is slightly larger. You can also place it over the hatchback in the rear to give more room to cook when it is raining. Or, have two.
Yep. My suction cups arrived yesterday and now I’m ready to go. Thanks for the tips. This is a super idea, is very flexible, and inexpensive. What’s not to like?
Thanks for the info! I’ve been scratching my head on how to do this kind of set up and suction cups are the answer! Just ordered the exact ones on Amazon, thank you again! Bryan from Vancouver
I think a little chunk of sliced in half pool noodle under the suction cup hardware can offer some protection from the wind banging it against your paint and causing damage. The suction cups are great but are a bit hard to get off.
Friggin’… BRILLIANT! I’d probably use it once or twice a year, so this is perfect. I watched a few DIY awning videos too, and can imagine them going 🙄. 🤣
Yep. On a sunny warm day near the Grand Tetons I set the tarp up on the other side to shade the car side from sun. I also set the poles all the way down which helped it resist some decent winds. I have also set it up with the shorter side against the car for a longer reach for the tarp to get more shade.
Just saw your video 7/28/21. Rocked my world! On mt 3rd ---and LAST---incarnation of awning setup for my honda element. Suction cups are easy to switch from back to side of the car as sun moves here in the desert, making repositioning 1. Possible 2. Pretty easy. Many thanks
Great Vid! I especially like how you even put your video editing software in your list of goodies! I've been trying to figure out what works best for video editing and it seems to be a real secret! So thanks for sharing even those little details! Thanks much, -Mike
Nice setup and instructional video. I made something similar for my Jeep Wrangler, based on a video by SUV Rving. I have a roof cargo basket and attach strong spring clips to the cargo basket (where you have the suction cups), and use collapsible PARIA TARP and TENT Poles which are thinner and lighter than your poles. I like the sturdiness of the poles that you used better. However, my skinny poles held up in 10-15 mph winds, but noisy like you said. And you are correct about the cheaper blue tarp. I was in the desert in my video and had good shade but the light does come through. I will be purchasing the brown shade to try out next time. Also, I can put those suction cups to good use for other items on the Jeep, but not the roof, which is made of hard plastic. Thanks.
Nice ideas. I thought life would be easier with a cargo basket but the nicer ones for the 4runner that can support more weight were way too expensive for me, and heavy. I figured this was good enough for now. Your poles are nice. If I saw them before I purchased mine I would consider them but I wouldn't know if 6 ft was enough. I guess it could work... if they were cheaper I'd half consider getting them and using one of mine to prop up the middle. I guess having 3 poles in a little 6x8 area would be tight though. Never considered plastic roofs before! Good point.
Very nice video..thanks for informing about the quality and size of tarp..I mistakingly purchased 10x12 feet tarp which I could not fix on my car..suction cups is a best idea indeed👍
Wow...thanks for this idea! My vehicle is shorter, so I was going to use my hiking poles, but I have been thinking of all kinds of ways to anchor my tarp to the vehicle. Suction cups - who knew! p.s. for vehicles where space is really limited, a nylon tarp can stuff down to the size of a softball.
Over a year ago I came across your video about wide hiking shoes awhile ago and now I'm wearing the Asics Gel Venture 9s now. Decent so far, maybe got a half size too big and still might try some Atlras soon. And now I recently found myself thinking "I want a roof rack awning but I wouldn't use it often enough to justify a dedicated roll out" and I had a similar idea as you using a tarp, poles, and lines. Crazy to see you pop up in my search for examples of that on RUclips! It's kinda nuts, I feel like you're an alternate version of myself living a few years in the future 😅
Jay, suction cups are pure genius, great simple setup, may I suggest that when putting your poles on, that you keep the rubber end caps handy, place the spike through the tarp, then guy line, then place the rubber end caps on ( maybe even a large washer) that will stop the poles detaching from the eyelets, still can’t believe how the rest of the world and his dog has NEVER thought of using suction cups, so damn simple, thanks for sharing 👍😃
I looked at racks as well and the bigger ones were heavy let alone expensive More top weight was one thing I wanted to avoid. I saw that they have brackets to attach a real awning to the Thule roof rack bars but they have a note saying not recommended for off roading. I guess to much force from it. I'll probably stick with this set up for a while to come since it's more inconspicuous.
It's not the best for strong winds or gusty situations I'll say that much. I'm thinking of trying something with shock chord to help absorb gusts and not pop the suction cups off.
Great idea with the suction cups. I’m going to tinker around and find a different support system than the guidelines though. I camp mostly in the desert and finding places to sink stakes effectively is always a pain.
If your poles are long enough, I wonder if you could also attach suction cups to the feet of your poles and have the bottom of your pole attach to the side of the vehicle rather than the ground (like some electric awnings on RVs). That could be useful in certain terrain or if there were some obstacle to pole or line placement.
That's some nice out of the box thinking! True, there have been times I'd be in a bush trying to stake down an end.... I guess if I bring the pole bases down parallel to the tarp and still stake out the guy lines to stretch out the front it could work well. Before sleeping I could also lower the poles to create a lower front end to let water run off. I'll have to play with that idea someday! I think my only concern would be the strength of the suction cups but it could work. I may also get 2 more suction cups and use a tiny segment of 550 chord to reinforce the other 2. Thanks for the idea!
Thanks. It won't hold up to as strong a winds as the mounted ones but it works quite well for me. When it's mildy windy I always park with the other side into the wind.
@@JayWandersOut got all the parts in a few day ago and did a test setup. Seems very stable to me! Oh, even though that brown/silver tarp doesn't seem to be available on homedepot.com, I did find it in my local store. Very well made and low cost. Thanks again!
We’re told that in the comments below you’ve listed the name of these and where to get them. I didn’t catch it perhaps you could bring the packages up so we can see them and maybe take a screenshot very good idea I love it thanks
I love the design. You make it easy. I like your rooftop size of your carrier. What’s the model of and the size. I also like your solar. Is it 200 watts?
Thanks for the info on permethrin. I use it on my hiking pants. That’s a great idea putting it on the screen. I have the extension poles and the suction cups. I found a nice tent footprint which is water repellent and has grommets in the corners. I’ll be using it for the tarp. I’ll try and get a video out. With links to all the parts and send people to your video link for getting me interested in tarp awning setup with suction cups. My Current suv is a Kia Soul which will be upgraded next year. Take care Brother.
Neat idea. I might add something like that to my suv. Also you should look into oil skin tarps. They’re expensive and heavy. But they’re also super durable.
I like it about the same exact polls but they’re called green something nice and thick and heavy duty my tarp is a bit bigger as it is a rain fly for a hammock but I could simply buy the same basic tarp you have here at Harbor freight or something I would like to be able to rig it up just like yours on the side and see if I could do something without buying those suction cups but if I have to I will. I’ve seen both set ups on the side and off the back of the 4runner with the hatch open but it makes a big difference when you can sit out there and have a little roof over your head it makes it very cozy instead of just sitting out in the middle of the field. Thanks for the video.
Havin trouble getting the suction cups to stay Jay = / Every time I try to tighten a line, the opposite side pops off. Don't believe I'm over tightening/exerting either. Also making sure to use flat surfaces. Any thoughts?
Can you please provide links to the roof rack cross bars and cargo box you have in this video? Love the content! I have a 2017 SR5 and I love the crossbars you have
Hi Jay, just saw you video now and I really love you smart idea about the Awning. May I please have the link to the Garden Pro Pole & the Suction Cup please and thank you 🙏😀
Believe it or not I put my bag of suction cups on the back tire then drove off... ran right over and broke both of them! I ordered more right away just to have backups available. Won't do that again.
For my Explorer, I'm looking at the 270 degree awnings to see if one is made for my vehicle, because I want to open the tailgate and have access to the driver side doors. Before I commit to that though, I was looking to see what I could do on the cheap. I've also looked into those pvc container awnings and dislike how they attach, looks too floppy, because I want to use a 10x10 Aqua Defender tarp and that means about 4 foot of that pvc would be hanging over the front, without support. Really do not want that. I did get similar suction cups and I have 4 green elephant poles so I can do a diagonal across from the passenger side corner, suction cup there, maybe 2 other suction cups at the drivers' side edge to hold the tarp secure, then 3 poles out on the other corners, with 1 pole in the middle so it can be higher and let any rain/snow/etc to slide off the tarp. Doesn't cover the tailgate that well, but it does shade the drivers' side pretty well, but doesn't work with a roof box attachment. I may get a second tarp and more poles and do an overlap to cover the rear area better. A lot more work and more time needed to set up, but doesn't have a permanent attachment and doesn't cost as much as a dedicated system does.
Watched about 10 videos before this one but all seemed awkward. Your idea is the one I am going with! Simple and when you take the tarp down all the ugly hardware is gone. Thank you and well done!
You captured exactly what I had envisioned in my mind. Pulling the trigger and saying NO to expensive awnings! Thanks Jay
I used to detail cars for a living and i worked at a large dealership at one point in addition to small shops along the way. I say that because of the suction cups. They will not provoke any issues or harm ur clear coat in any way,.Just wash ur suv and perhaps hand wax the areas were the suction cups are being applied just to keep up with the paint. Considering oxidation (Oxidation creates an ugly faded burnt apearance on the surface of the paint) will always effect the 3- tops on a car, hood, roof and trunk lid as they are the most exposed to the elements, on an SUV it will obviously effect only 2- areas hood and roof. It's so vital if u luv ur car to clean or treat the surface, this will also help the suction cups attach and hold better and slide less under stress should the wind pick up. Enjoyed ur vid another good economical diy project. Good stuff thx for sharing👍
Thanks for the info! Very good information indeed. I really have to clean my car more especially like you said in the key places.
@@JayWandersOut definitely whether you intend to keep or sell ur car its worth doing. It will maintain the value of ur car and it will continue looking good. Take care Jay.👍
You can also just use a single suction cup on the sun roof glass and then put a zip tie on roof rail. It will be a little janky but it will get the job done.
Add a small patch of clear adhesive film to each area for suction cup to protect paintwork, when you want to remove same use a hairdryer to remove, works fine, great video.
This seems like a good idea, since I was worried about that too. Thanks for the suggestion.
Great idea.. ppf is pretty cheap
I'm glad I saw this video. I'm going to go this route rather than getting a real awning . I like how the put away is really simple thanks for the video
When you use the poles with the pointy end through the grommet, use the caps to keep them in place. Just in case you get that upward wind. Super simple, great video.
Yep, I've been placing the cap on most times largely in case the poles fell towards the car that cap would protect the car.
Hi Jay, great video. Thanks for sharing. As a suggestion for your suction cups, you might consider attaching them to your windshield and rear window. The cups are not likely to damage the glass and if they leave a little mess, that should clean off easily with glass cleaner. Just an idea.
But, like Jay Wanders Out said, it would then rub the top of the door on the tarp, spilling rain when it does. ... Maybe a modification to that concept, like an offset cone or a tube around the sup cup leash, would mediate excellently.
There is this wrap stuff called "Body Guard" that is supposed to protect the paint of scratches and micro-dings, adhering that might be a more permanent application for protecting attachment points on the body, ...or applying extra wax, or a silicone-based protectant?
I did this on my Chevy Equinox and it worked perfectly! Even as a solo female, I had it set up in no time, and it stayed secure and tight the whole weekend. Thank you for such a well done video!
Hi. What suction cups did you use? Did they work well? In wind?
@goldenglowladore3842 They work perfectly for this purpose and hold up in windy areas.
The lever activated suction cups work the same as the handles used to carry large sheets of glass when installing windows.
Very strong and very dependable as long as the surface your adhering to is smooth and clean.
The suction cups are a great idea. You should know that on a super windy day, those plastic hooks can start to bounce and beat the metal, causing a dent on the roof. Think about wrapping foam or cloth around the clips. I had a plastic bungee hook tiedown hooked onto a tarp on my truck. The buffeting wind made the hook bounce so hard on the tailgate it left a dent. But I was driving at the time. Just something to consider.
Amazing! I was deep down a RUclips hole checking out DIY awning ideas and none I saw had the suction cup idea I was thinking of!
So much more simpler than drilling, mounting, etc a heavy, long ass bar on the roof racks.
I’ll try this out, thank you!
I like that when not using it nothing is visible. The more it looks like a normal car the easier it is to stealth camp in a pinch.
This was exactly how I saw it in my head- thank you! - you put it on video so I could show my husband the idea. But the use of suction cups made it even better!
Nice job. I watched many videos on awnings but none applied completely with my need for an awning that didn't have to be permanent. I didn't want to drill holes into my van and your idea of using the suction cups was a great solution! Thanks!
The suction cups are a good idea. Someone suggested fishing magnets (really strong magnets with eye bolts threaded into it) because I don’t have a roof rack. But I worry about them scratching, or my not being strong enough to get them off haha. Also someone else said harbor freight has telescoping painters poles for $8 but I’m not sure if the threading will fit in the grommet. Definitely worth looking in to though because they could be easily modified. I think I’m going to go off the back of my Jeep and have the sides go to the ground so I have a sort of privacy tunnel since I’m going solo. Lots of great ideas in the comments sections passing on here. Safe travels 🚗🏕
The painter poles usually have a plastic threaded fitting to screw into the paint roller handle. On the one's I purchased the plastic threaded tip was about 2-1/2" long solid plastic swagged into the aluminum pole shaft. I just drilled the end of the plastic fitting and inserted a pin made from a 3/8" diameter framing nail. Has worked great for about 15 camping events so far.
I use painter poles put from Walmart and added screws at the top to attach the grommets. Poles are about $12 a piece
pics? tnx
Excellent, got less than a week for camping and I was thinking alternative hack so this helps!
This, to me, is the most practical set up I've seen. I'm going to order the same materials for mine.
Best review of the pros and cons of tarp! No noisy blue stuff keeping ME up all night! Thank you!
I have a 5th Gen 4Runner too and I just purchased the Green Elephant telescoping poles to set up a awning also. Don’t have the suction cups however. I’ll try to work around that and use the basket rack itself but may end up buying them too.
When the awning is set up it changes the whole feel of camping vs parked out in the middle of nowhere with just your vehicle doesn’t it. 😎🤙
Basically I use the same set-up on a minivan. I have a wooden rail attached to the roof rack with hooks for each grommet for the vehicle side. I only set it up when I know I'll be stationary for at least a couple days. When I do use it, it expands my living area and nice to have.
Exactly what I needed to see as I'm planning on using this setup for working in my engine bay in the sun. You make it look easy. Top job. Cheers from Australia subbed and liked 👍
I really like the suction cup idea 💡! Thanks!
On the DIY side of things one can use extendable paint poles they dont pack down as small but setting one up will keep you well under $20 for 2 poles. 4'-8' expandable painter pole from Wal-Mart $7.42, Stainless Lag bolt from Home Depot $0.49. Drill a hole in the threaded end of the painters pole smaller than the lag bolt so you get a good grip and it bites. Thread the bolt in then remove it. Holding the pole horizontally I fill the hole with hot glue i can usually get 2 small sticks of low temp mini hot glue sticks in. Before it sets thread the lag bolt down so there are no threads exposed and rotate the pole to a vertical position with the lag bolt down to allow the glue to set around the lag inside the pole. Alternatively you could use epoxy instead of hot glue. I leave my poles like this because I use tarps with straps on them. But you could easily grind the head off the lag for a traditional looking tent pole.
Great idea. I'm considering getting one more pole for the center to divert rain better.
Genius! Just got a 4Runner and looking for some adventure. Your solution isn't just economical; it's also very efficient for saving space. Thank you for sharing - God Bless.
Finally, a real budget friendly and good looking DIY awning. Thanks man!
The suction cup is really a new thing to me. Thanks for posting!
I have another solution fro the poles however i use the poles you use for painting with a roller
$7 each. just put a pencil in the top hole and the grommit.
Thank you for posting this video. I am a hammock camper and I made myself a nice bug screen cover for my hammock called a fronkey style bug net. so I got to thinking how hard would it be to make a bug screen porch for an awning. Go to your local Walmart and look for mainstays brand sheer curtains, each pack of curtains cost about $4 and there are two panels in a pack. I suggest you buy the tallest set of these curtains. You will need about 4 packs total to create a nice protected screen porch from mosquitoes and other flying bugs. I hope this info helps. I am currently building my rear hatchback screened in area that I can attach with magnets. Your suction cup idea is a game changer for me because I did not want to mount an extension pole on my roof rack. I just bought 2 sets of the suction cups a total of 4. Make sure if anyone tries this method and to remove the plastic sheet on the suction cups. There is a plastic sheet to protect the cups from debris. They have to be removed or you will not get good suction.
Good ideas. I've also encountered a problem where in Bighorn National Forest all these tiny green bugs kept landing on my bug screen so they'd get in when I pack things up. I have concentrated permethrin with me so I made a solution then soaked all the netting. Now no bugs ever sit on the netting for more than a second or so. Permethrin is magic. I've always treated my hiking clothes with it but I'll treat my netting regularly from now on. You're so right about the protective film on the suction cups. I hope everybody remembers to do that.
I made a diy rod for our tarp....went through all that and few months back saw these similar cups on Amazon..
I use 3 suction cups and two extendable poles like yours....
They work nicely
I like it. You are well spoken and easy to listen to. Good job buddy !
Adjustable bungee cords is what I found works for holding the tarp, anchored on the roof rack.
Thanks
Really good and clear presentation, and I love the suction cups. I have a smooth fiberglass topper with no racks, and I've been struggling to figure out a way to attach a tarp to it. Suction cups are the perfect solution.
I think it's a great idea, I just bought a 4runner and I will definitely use your idea. Good Job!
That’s a beauty! Excellent idea - makes you wonder why such things cost so much! Good job, young man! 👏👏👏👏👏
I guess to be fair those expensive ones will hold up to much stronger wind but I heard the UV eventually always does a number on the outer bags and I didn't have a good safe way to mount one to my roof rails. I do think many people get the big awnings though to make themselves stand out and look the part.
I just loved the suction cup tie downs. Solved a big problem for me. Many thanks for the idea.
Our first time camping with our new SUV. This is a great idea since I do not want to connect anything to it permanently plus I like to put it sometimes on the backside or other times on the side of the car! Thank you Jay!
A month or so ago I just used the tarp and poles to set it up over a picnic table so I could drive away. Definitely gives you flexibility.
Thank you!! I was going to buy an awning but this is cheaper and actually a better solution. Packs away better and more options on size. Rock on! 🤘
This was a very helpful video for me! It answered all my questions and gave me a great way to make an inexpensive, but high-quality awning for my van. Thank you so much for sharing this!
thank you for sharing! worked flawlessly for me. I just started overlanding and I am slowly building my gear. eventually I will buy an ARB 2500 awning but for now I will settle for this set up. I showed your link to a couple of my friends and we did our awning this way. We had a bunch of people inquiring about your set up. thank you
Nice, Chris! I've continued looking at ARB awnings but without installing a new roof rack it seems like most attachment methods aren't suitable for off roading. I'll probably just stick with this for a while to come since it all stows away out of sight. I only use it when it's going to rain or it's sunny anyway so it's convenient to have. It's also convenient because you can set it up on either side as you need at a particular time. I'm glad this helped you and your friends out!
I used this method and LOVE it!!! Thank you so much for this tutorial. 👍🏻
I was binge watching videos about set up with Outbacks. This is cool Jay. I have to check out more of your videos!
Great set up!! Another option for telescoping poles is shower rod pole with a drilled hook in it for your tie loops
Home Depot or any hardware stores sell a telescoping paint roller pole for rolling ceilings which extends to 8 feet and cost about $15 each.
Thanks for this Jay! I really like your solution with the suction cups and am going to use it for my Eurovan. The rainy winters of the PNW can't keep ME indoors!
thank you, always nice to see a Canadian do diy and where to purchase the parts
I have actually seen cheap awnings for sale that attach with suction caps. Thanks for the video.
Genius. I made a slight modification and it works perfectly. Also you can place a pole in the middle a bit higher than the car and the water runs off when it’s raining. My tarp is slightly larger. You can also place it over the hatchback in the rear to give more room to cook when it is raining. Or, have two.
Yep. My suction cups arrived yesterday and now I’m ready to go. Thanks for the tips. This is a super idea, is very flexible, and inexpensive. What’s not to like?
Love the awsome instructive narrative Jay,super great quality video
Thanks for the info! I’ve been scratching my head on how to do this kind of set up and suction cups are the answer! Just ordered the exact ones on Amazon, thank you again!
Bryan from Vancouver
Also from Vancouver - have you tried them yet? I’m wondering how they stand up in the wet!
I really like the suction cup idea...easy on and looks easy to remove...overall that looks alot more economical ..
Thanks
I think a little chunk of sliced in half pool noodle under the suction cup hardware can offer some protection from the wind banging it against your paint and causing damage. The suction cups are great but are a bit hard to get off.
Friggin’… BRILLIANT! I’d probably use it once or twice a year, so this is perfect.
I watched a few DIY awning videos too, and can imagine them going 🙄. 🤣
I am impressed! Thank you! Plz let us know if you start to have problems with the suction cups and what you decided on
Outstanding! Thank you! Solid, but not permanently attached. And can be placed just about anywhere.
Yep. On a sunny warm day near the Grand Tetons I set the tarp up on the other side to shade the car side from sun. I also set the poles all the way down which helped it resist some decent winds. I have also set it up with the shorter side against the car for a longer reach for the tarp to get more shade.
Excellent content and use of materials. Imagination and knowing your vehicle is important.
Just saw your video 7/28/21. Rocked my world! On mt 3rd ---and LAST---incarnation of awning setup for my honda element. Suction cups are easy to switch from back to side of the car as sun moves here in the desert, making repositioning 1. Possible 2. Pretty easy. Many thanks
Yep, I've moved it to the other side a few times just for sun.
Hello Jay, that was a great set up.
Thank you for sharing. All the best to you. Stay healthy. 🤗
Great Vid! I especially like how you even put your video editing software in your list of goodies! I've been trying to figure out what works best for video editing and it seems to be a real secret! So thanks for sharing even those little details! Thanks much, -Mike
Nice, easy. Affordable set up!. Level 100
I'd use a retractable clothesline. You only need one pole to extend it and a tarp to create some cover.
Nice setup and instructional video. I made something similar for my Jeep Wrangler, based on a video by SUV Rving. I have a roof cargo basket and attach strong spring clips to the cargo basket (where you have the suction cups), and use collapsible PARIA TARP and TENT Poles which are thinner and lighter than your poles. I like the sturdiness of the poles that you used better. However, my skinny poles held up in 10-15 mph winds, but noisy like you said. And you are correct about the cheaper blue tarp. I was in the desert in my video and had good shade but the light does come through. I will be purchasing the brown shade to try out next time. Also, I can put those suction cups to good use for other items on the Jeep, but not the roof, which is made of hard plastic. Thanks.
Nice ideas. I thought life would be easier with a cargo basket but the nicer ones for the 4runner that can support more weight were way too expensive for me, and heavy. I figured this was good enough for now. Your poles are nice. If I saw them before I purchased mine I would consider them but I wouldn't know if 6 ft was enough. I guess it could work... if they were cheaper I'd half consider getting them and using one of mine to prop up the middle. I guess having 3 poles in a little 6x8 area would be tight though. Never considered plastic roofs before! Good point.
So practical. I love it, man. It even works for a smaller suv. Thanks for sharing!
Very nice video..thanks for informing about the quality and size of tarp..I mistakingly purchased 10x12 feet tarp which I could not fix on my car..suction cups is a best idea indeed👍
Wow...thanks for this idea! My vehicle is shorter, so I was going to use my hiking poles, but I have been thinking of all kinds of ways to anchor my tarp to the vehicle. Suction cups - who knew!
p.s. for vehicles where space is really limited, a nylon tarp can stuff down to the size of a softball.
What an awesome alternative to an awning!
Over a year ago I came across your video about wide hiking shoes awhile ago and now I'm wearing the Asics Gel Venture 9s now. Decent so far, maybe got a half size too big and still might try some Atlras soon.
And now I recently found myself thinking "I want a roof rack awning but I wouldn't use it often enough to justify a dedicated roll out" and I had a similar idea as you using a tarp, poles, and lines. Crazy to see you pop up in my search for examples of that on RUclips!
It's kinda nuts, I feel like you're an alternate version of myself living a few years in the future 😅
Jay, suction cups are pure genius, great simple setup, may I suggest that when putting your poles on, that you keep the rubber end caps handy, place the spike through the tarp, then guy line, then place the rubber end caps on ( maybe even a large washer) that will stop the poles detaching from the eyelets, still can’t believe how the rest of the world and his dog has NEVER thought of using suction cups, so damn simple, thanks for sharing 👍😃
Thanks! You saved me $1,000 - I thought I had to buy a rack and a fancy awning 🤝
I looked at racks as well and the bigger ones were heavy let alone expensive More top weight was one thing I wanted to avoid. I saw that they have brackets to attach a real awning to the Thule roof rack bars but they have a note saying not recommended for off roading. I guess to much force from it. I'll probably stick with this set up for a while to come since it's more inconspicuous.
Thanks for sharing this awesome idea Jay! I will be wind testing it within the next 2 weeks haha! Safe Travels.
It's not the best for strong winds or gusty situations I'll say that much. I'm thinking of trying something with shock chord to help absorb gusts and not pop the suction cups off.
Great video, thank you for all of the detail. Exactly what I was looking for to prepare for a camping trip out on BLM land.
Great idea with the suction cups. I’m going to tinker around and find a different support system than the guidelines though. I camp mostly in the desert and finding places to sink stakes effectively is always a pain.
Maybe use sand bags, stuff sacks with sand, rocks attach line to them
Bought the parts as shown, have used it several times. Works great! Easy on the wallet too.
Thanks for the heads up.
You're welcome! I still use the same system and used it a couple of weeks ago for some rain.
I had Tristan's concept (@SUV RVing) on my old Ford Escape. Going to look into these suction cups for my new (to me) Jeep Cherokee.
If your poles are long enough, I wonder if you could also attach suction cups to the feet of your poles and have the bottom of your pole attach to the side of the vehicle rather than the ground (like some electric awnings on RVs). That could be useful in certain terrain or if there were some obstacle to pole or line placement.
That's some nice out of the box thinking! True, there have been times I'd be in a bush trying to stake down an end.... I guess if I bring the pole bases down parallel to the tarp and still stake out the guy lines to stretch out the front it could work well. Before sleeping I could also lower the poles to create a lower front end to let water run off. I'll have to play with that idea someday! I think my only concern would be the strength of the suction cups but it could work. I may also get 2 more suction cups and use a tiny segment of 550 chord to reinforce the other 2. Thanks for the idea!
Just got a new Honda Pilot and was pondering my awning options. The suction cups a brilliant! I might give this setup a whirl. Thx!
Thanks. It won't hold up to as strong a winds as the mounted ones but it works quite well for me. When it's mildy windy I always park with the other side into the wind.
@@JayWandersOut got all the parts in a few day ago and did a test setup. Seems very stable to me! Oh, even though that brown/silver tarp doesn't seem to be available on homedepot.com, I did find it in my local store. Very well made and low cost. Thanks again!
Suction cups are food for thought. Thanks 👍
thanks for sharing. where did you buy those suction cups & does ir come with hooks? thanks.
Best tarp idea I’ve ever seen!😊😊
Thanks Jay. Loved it. Suction cups and poles will worm for me!
We’re told that in the comments below you’ve listed the name of these and where to get them. I didn’t catch it perhaps you could bring the packages up so we can see them and maybe take a screenshot very good idea I love it thanks
I love the design. You make it easy. I like your rooftop size of your carrier. What’s the model of and the size. I also like your solar. Is it 200 watts?
Nice, Jay. Everything there looks durable and functional. I like this solution. 👊😎
Great vid!!! I was looking at a knockoff ARB for upcoming trip but I'm doing this now. I have everything but suction cups. Thanks again!!
Thanks for the info on permethrin. I use it on my hiking pants. That’s a great idea putting it on the screen. I have the extension poles and the suction cups. I found a nice tent footprint which is water repellent and has grommets in the corners. I’ll be using it for the tarp. I’ll try and get a video out. With links to all the parts and send people to your video link for getting me interested in tarp awning setup with suction cups. My Current suv is a Kia Soul which will be upgraded next year. Take care Brother.
Permethrin is magic for me! I soak all sorts of clothes in it and even keep a collapsible bucket in my car partly for that purpose.
Thank you for the instructional video. Just what I needed as I've struggled with the concept for awhile. I will give it a try.
It works well but just not on super windy days. Gusts over 40 mph popped a corner off recently but that's super windy. Have fun!
Thank you Jay for a great idea,may I ask if where did you bought that garden post and suction cup.may I also ask the brand name..Thanks..
Nice build. I need those suction cups. I like seeing more built not bought. Great job. 👍🏽
Hi Jay. Great setup. Got everything bought and set it up today. It was perfect. Thanks so much!!!
Brilhante ideia, aqui no Brasil, não tinha nada parecido, vou hoje mesmo fazer igual, ganhou mais um seguidor.
Hi Jay, I'm Jordi from Spain, thanks for sharing ;-) this solution is awesome! I like it!!!
I love this concept! Awesome awning and great instructions!
Neat idea. I might add something like that to my suv.
Also you should look into oil skin tarps. They’re expensive and heavy. But they’re also super durable.
I looked at those tarps for my backpacking days but for car life I wanted quick drying and small when folded up.
I like it about the same exact polls but they’re called green something nice and thick and heavy duty my tarp is a bit bigger as it is a rain fly for a hammock but I could simply buy the same basic tarp you have here at Harbor freight or something I would like to be able to rig it up just like yours on the side and see if I could do something without buying those suction cups but if I have to I will. I’ve seen both set ups on the side and off the back of the 4runner with the hatch open but it makes a big difference when you can sit out there and have a little roof over your head it makes it very cozy instead of just sitting out in the middle of the field. Thanks for the video.
Yes, when it's warm and rainy I like having the awning so I can open the window as well. Makes such a difference versus just cracking it.
Great, easy setup. Saying hi from Ladysmith!!
Have you tried attaching the suction cups to the back of the roof rack caps?
Excellent. The easiest & best set up. Thank you.
Havin trouble getting the suction cups to stay Jay = / Every time I try to tighten a line, the opposite side pops off. Don't believe I'm over tightening/exerting either. Also making sure to use flat surfaces.
Any thoughts?
Great job.. thanks for info ... I just bought a set 2 poles, set of 4 sucking cup.. on Amazon .. $50 box 🌝... get ready for this summer .. 👍👍
Thanks for the ideas and the links. Happy new year.
Can you please provide links to the roof rack cross bars and cargo box you have in this video? Love the content! I have a 2017 SR5 and I love the crossbars you have
Hi Jay, just saw you video now and I really love you smart idea about the Awning. May I please have the link to the Garden Pro Pole & the Suction Cup please and thank you 🙏😀
Thanks. Here's the suction cup: amzn.to/2wQykbu
and poles: amzn.to/2T5RD9w
Great idea suction cups. Thank you.
Absolutely awesome set up. And the price is right on.
Believe it or not I put my bag of suction cups on the back tire then drove off... ran right over and broke both of them! I ordered more right away just to have backups available. Won't do that again.
For my Explorer, I'm looking at the 270 degree awnings to see if one is made for my vehicle, because I want to open the tailgate and have access to the driver side doors. Before I commit to that though, I was looking to see what I could do on the cheap. I've also looked into those pvc container awnings and dislike how they attach, looks too floppy, because I want to use a 10x10 Aqua Defender tarp and that means about 4 foot of that pvc would be hanging over the front, without support. Really do not want that. I did get similar suction cups and I have 4 green elephant poles so I can do a diagonal across from the passenger side corner, suction cup there, maybe 2 other suction cups at the drivers' side edge to hold the tarp secure, then 3 poles out on the other corners, with 1 pole in the middle so it can be higher and let any rain/snow/etc to slide off the tarp. Doesn't cover the tailgate that well, but it does shade the drivers' side pretty well, but doesn't work with a roof box attachment. I may get a second tarp and more poles and do an overlap to cover the rear area better. A lot more work and more time needed to set up, but doesn't have a permanent attachment and doesn't cost as much as a dedicated system does.
I like your simplified version more than my own. Nice job. Cheers.