Wood Model Ship Plans and Tutorial Series - Prepping Hull for Planking - Video #2

For plans and the full tutorial to this project, just send $5 (or any amount, really) to my PayPal account, making sure to include your preferred email address. paypal.me/Craf...
(View my playlist for all of the videos in this series. They are unlisted, otherwise)
If you would like to support the channel in general, please visit my Patreon site at / craftbenchmodels
(The plans and tutorials are also available on the Patreon site)
How to build a wood model ship from scratch!
General Summary: This video walks a hobbyist through the steps of creating a wood ship model step by step. It is designed for those who have never built a wood model ship before, and are either 1) nervous regarding the perceived complexity of building a model ship and/or 2) do not wish to pay an exorbitant amount of money for a model ship kit which might not be completed.
As a modeler views these videos, they will note several versions of the ship being built. This is a very easy model ship to build, and can be configured/modified in a myriad of ways to suit the modelers taste. It is possible to end up with very different looking models based upon the woods/colors/ornamentation chosen throughout the build.
If you enjoy these videos, please hit the "like" button, and "subscribe" so you keep abreast of updates as they are made available. My intent is to post regular updates to this channel, and to provide documentation on how to build my favorite projects.
Other videos currently on channel:
Wood Model Ship Plans and Tutorial Series - Video #1 - • Wood Model Ship Plans ...
Rough overview fragments below..
During the fairing process, methodically press planks against your hull in order to ensure your model is eventually ready to accept planking in every area of the ship.
This photo shows the front view of the faired hull. Now note the angles sanded into the front bulkheads. And as we discussed before, as you move towards the middle of the ship, again, the bulkheads have not needed to have been sanded very much at all.
The first plank to be prepared will follow the deckline of the model on each side.
Now Note the cut-up clothespins messy with glue, the ripped paper templates, etc etc… It really does not matter what the inside of the model ship looks like since it will not be visible when the build is finished. It also does not matter what the tools look like used in construction.
Now for the garboard plank. Now before I begin this next section though, Advanced ship modelers will find the following instruction to be simplistic. My design here however, IS simplistic since it’s easy; this video is really intended for those who have not built complex model ship hulls before. If you are an advanced modeler, you can of course use your own preferred planking technique.
We have now come to the most interesting part of the build. When planking a hull, an even number of planks will not fit the area to be planked equally in each section of the ship
I finally decided that it would be best to have a keel and garboard plank installed, which is the method which is most proper, and which would give the modeler more planking experience they could then carry over to their next model ship.
However… You do have the option to use any type of wood you wish on this project; if you are confident in your abilities, if you are an experienced modeler, there is no reason you can’t use a nice wood on the hull, be very accurate in your sanding and gluing, and end up with an extraordinarily beautiful model ship once the stain has been applied.

[@EgyRow]

Your way of explanation is awesome thanks for this great vedio

[@immunosuppressor]

Thanks! It's pretty rewarding to hear that these videos are useful to folks. :)
Alan

[@keithcheeseman567]

oh wow, just when you wish someone could show you how! Im just about ready to plank my first model (Schooner) and i have just been a bit stressed on how to go about it. I know now, thank you so much for this tutorial.

[@immunosuppressor]

Thanks Keith! I do hope this helps. If you have a space in which you can create a good deal of sawdust, I'd also recommend sanding a piece of scrap pine wood or something similar to the same basic shape of your schooner, and practicing on that before planking the actual model. You can purchase strips of basswood at your local hobby or craft store which are very inexpensive. Once you've done it on scrap pieces a few times, you'll really get a feel for the process, and planking the actual model will be a pretty fun process. :)
Alan

[@keithcheeseman567]

@@immunosuppressor Thank you for your reply, that is a fantastic idea as these models are worth taking the time and effort for either turning out a good model or a great model.

[@sameerparammal0076]

Nice work

[@immunosuppressor]

Thank you Sameer :)

[@immunosuppressor]

Hello, I've added closed captioning to these videos. It can be turned on/off via the controls in the lower right of the screen. Please let me know if you enjoy this video, and any suggestions you may have! - Alan

[@jimmd53]

I am a new viewer. I would like to know what glue do you prefer in planking the hull and if you use other glue(s) for the deck. Does cyanoacrylate give a lasting bond for wood to wood surfaces? Thank you.

[@immunosuppressor]

Hi Jim, I like working with Titebond wood glue. I use it for both the hull and the deck. Some modelers will use cyanoacrylate glue in order to "nail" down ends of planks when they are having a hard time keeping them flush against the hull, but when that occurs, I work on bending/shaping the plank so no pressure or "nailing" is required. I like it to just rest in proper position without mechanical assistance. I also prefer Titebond or standard wood glue so I don't have to worry about odor or accidentally sticking my fingers together. lol

[@insectosinsect7959]

Bro when i bend planks i partially snap them the sand it