I've watched this at least three times. I swear I haven't seen anyone who can manage to pull off the range This Old Tony does. From something that legit could be in an art house film festival, to the good natured snarkiness that is Lathe Leveling, to the satire of Origins all that AND I learn something every single time. Bravo, man.
Outstanding!! Absolute pleasure to watch a master at his craft. UPDATE: just rewatched this and it is so relaxing, interesting, cathartic a real pleasure of a watch! Thank you Tony for bringing 1000x better quality content than television ever will!
Me- "Damn I wish I had this man's shop!" (Sees large drill bit) Me- "That bit alone is probably $100. Gonna have to stick to woodworking." To be completely honest, it would be a huge disservice to your shop if I did have it. I'm constantly amazed by what you can do and never knew a lot of it was possible with the tools you have. Hell, I never knew a lot of those tools and accessories even existed. I enjoy watching you work though!
The rest of RUclips ruined RUclips, This Old Tony merely avoided making his videos (nOT CLiCkBAiT) PRANK!!! (GonE WrONg) (GoNe SeXUaL) (CONfesSiOn) (NO DrAMa!) For which I am extremely grateful, this channel remains a beacon of hope, not only that quality content still gets made, but that the communities this type of channel (Abom79, AvE, ClickSpring, Applied Science, GreatScott, etc) bring together are so healthy; they're supportive, inquisitive, accepting and there's no hatred in the comments. Really glad you guys are here. Thanks both viewers and creators! Also Tony, if you're reading this, could you share your bronze recipe? I've tried it a dozen times and I keep getting brass.
@@CuthbertNibbles I keep getting ads for "RUclips TV" as if RUclips doesn't understand that if I wanted to watch TV I wouldn't be here in the first place.
i am blown away by a few things. how perfectly filmed and combined with humour your content is. and secondly how fucking underrated this channel is. im gonna spread out the love in switzerland at my college where im currently studying mechanical engineering! keep up the good fucking work mate well done
Sorry about your voice going out like that; Rough cutting stock like that can be tough on machinists. So glad to see you made the best of the situation and another fine video to boot!
The machinist humor with a slight international flair of AVE combined with the lets make it from bare stock of Clickspring, a winning combination! You Sir have earned yourself a new subscriber.
Been watching your channel for two days and now its my favourite. It's so satisfying watching your process of creativity and creation and the humor is right up my alley.
Wonderful. Was just sitting on the couch, watching this on the big TV with Dolby Sound, and eventually even my wife and the 11 months Babygirl joined. So fascinating and calming... :) Got yourself a new subscriber!
Man I've been binging on this like there is no tomorrow. I wanna be just like Tony when I grow up. Tony do you have a day job? How the hell did you learn all these skills? Twenty five million views? Start a school and make millions. Thanks so much.
Machining for the heart and soul, Oh My! Felt like I witnessed High Art...moving imagination to form and function through elegance. May be your best one yet Tony. Thank You are meager words....~PJ
I’m not sure why, but I felt the need to shed a tear at how beautiful this is. I’ve really only seen his videos where he’s doing a voiceover. This is something else, something amazing.
Hi Tony, just wanted to tell you that I love your channel. I am a retired Air Force Metals Technologist (Machinist, Welder, CNC Programmer), fancy title. You have great ideas and bring in humor in way that make me feel like I am back in uniform working in the old shop. Thank you for what you do.
This is the best mix of useful machining tips and entertainment I've ever seen! Man I laughed out so hard as you get use of your internal Opera steel cutter. I hope you got the patent ;) Many thanks for all the effort you put in your video's! Greetings from Germany.
+Abom79 I kept thinking, "man, I wonder if he's been watching Abom's parking attachment series?" I guess this answers that question. BTW, I'm really loving that series also. It's great seeing all the different processes in play. Thanks for taking the time to put your own master skills out there for us.
A good friend of mine recently came into possession of what is probably a 105 year old John Steptoe horizontal hand mill, which is pretty much the our great granddads version of what you're doing here. After about of month of cleaning and fixing, we made our first chips with it last night. This stuff is so much fun!
Regular guy: I need this part for my machine, do you guy carry it ? Shop: I don't think such thing exist . ----------------------------------------------------------- This old Tony : I needed this part so I made it.
Abom79 made a parking attachment for his vertical head. It's definitely a channel you should subscribe to as it's very interesting all the things he's worked on over the years
I stumbled upon your channel by accident and have been stuck here since. I have never been around a milling machine, but now want to take it up. I won't, but I want to. You make it look as though anyone could buy a lathe and milling machine and be creating metal art in mins. This is a gift Tony. Your humor is outstanding. Keep putting them out and I'll be here like Malcolm McDowell, Clockwork Orange
I watched this like a reflective Clark Griswold up in the loft watching old Xmas home movies in Nat. Lampoons Xmas Vacation. Blinding piece of workmanship and video editing. Tony - you've saved the internet!
How come THIS OLD TONY channel is the only thing I watch each and every day for the past year or so ?. It combines exquisite taste, knowledge, expertise, lots of laughs and a very good company. Love !. PABLO FROM ARGENTINA !.
ohh Mr.Tony....a true classic. how can i missed this years ago. you are like my old shopmaster i can feel the love you put into your work. thanks alot for this great content :)
Tony....this is one of the best videos I think I have ever seen!! Great production, super build, just great shot of machining and your humor is fantastic....ATB
I don’t recall the last time I enjoyed a video like that one. I used to wonder why my Dad would ask me to leave his “shop” when ever he was working on something very tedious. 53 yrs later and watching my you-tube hero’s and wishing I had a lathe & Bridgeport . . . . . . . . I understand. I wonder what he’d say if he saw a DRO and all the other digital tooling. Thanks Tony, I sure enjoyed it
Joyful watching that Swiss masterpiece come back to life, and the homemade Arbor steady was a bonus. 15 years milling on a Universal Huron mill for a living doing weapons manufacture, brought it all back to me...Thanks.
This is one of the first machining video i ever watched. When i first watched it, i didn’t even know what machining was, had never really questioned “how” things are made. Well, I just pulled my first bridgeport into the garage a few weeks ago, alongside my southbend heavy 10, 9a, 11” O series, Leblond… Let’s just say “fleet” of small lathes. (I have a problem with lathes) Coming back to watch it again for nostalgias sake, i realize that finding this video, and others like it, was one of the best things to ever happen to me. Behind marrying my wife of course, and adopting my dog.
I'm not halfway through watching, and I have to say.. this is fascinating to me... Precision machinery is just so intriguing. This comes from my former Air Force experience. For 8 1/2 years I was an Avionics Instrument Specialist, and that is all about precision measurement. KUDOS for carrying the flame!
OMG..... I can't put into words how amazing that French art piece was, it was just stock removal and precision and powerful but also it made me feel like a child again. 😢 I cried like a little kid when you added that groove on the inside of that finished hole but then I seen the oil come up through and it was like I found my innocence again.... 😭😭😭 Thank you ThisOldTony..... You made me feel alive again, Magnifique. 😭👏🏻😭👏🏻😭👏🏻😭👏🏻😭👏🏻😭👏🏻😭👏🏻😭👏🏻😭👏🏻😭👏🏻😭👏🏻😭👏🏻 After watching this, non je ne regrete rien¡! 😭👏🏻❤️
The Metal Butcher you do not know how to run a Bridgeport then I have four bridgeport's wouldn't trade them for the world let's see you Mill something 62 in Long how many set-ups would you do with this Mill would be in the 9 to 10 setups ,???my Bridgeport 48 inch table with a 30-inch cut!! do the math that's 2 and 1/2 setups and hold a .001 tolerance over that cut thank you but no is a cute Mill
You sir, are a master tradesman. That was a pleasure to watch! The quality of machine and workmanship, the attention to detail and some old-school techniques not often used now days was a real treat to see. Executed so we'll. My hat off to you.
I've watched this at least three times. I swear I haven't seen anyone who can manage to pull off the range This Old Tony does. From something that legit could be in an art house film festival, to the good natured snarkiness that is Lathe Leveling, to the satire of Origins all that AND I learn something every single time. Bravo, man.
I almost started clapping when it was over. This is one of the most beautifulest TOT videos. Chapeau.
Very clever way to pull off that head. Most of us would have just yanked it off of there and dropped it on our foot to cushion the landing.
I don't have that problem. Mine goes up and over the top of the machine ;) I might drop the horizontal piece on my foot though !
That's my preferred method and also why I now wear steel toed shoes.
Started sharpening my pencil watching this. finished watching, and noticed I only had the eraser left. Well done, Sir!
And the award for best editing in a RUclips machining video goes to....
+bensbenz . . . who? you're just going to leave us hanging?
;) Thanks Ben!
+This Old Tony well it's a Tony award so... :)
Some really nice work here. Very very enjoyable video! Well done!
Outstanding!! Absolute pleasure to watch a master at his craft. UPDATE: just rewatched this and it is so relaxing, interesting, cathartic a real pleasure of a watch! Thank you Tony for bringing 1000x better quality content than television ever will!
I almost broke a rib laughing at the singing.... and the bronze mix.... Excellent! Thank you for an uplifting end to the day!!! Too much fun....
This is an old favourite. The precision with which you made this part always impresses me.
I love this channel, it's a combination of AVe humour and clickspring precision!
you read my mind...all three are great. skookum as frig
All produce great vid jey o's !
A few tubalcain tantrums to boot would be nice.
it's abom79 plus AVe!
Nothing I love more than a little 🌶 spicy bronze....in the morning!
Me- "Damn I wish I had this man's shop!"
(Sees large drill bit)
Me- "That bit alone is probably $100. Gonna have to stick to woodworking."
To be completely honest, it would be a huge disservice to your shop if I did have it. I'm constantly amazed by what you can do and never knew a lot of it was possible with the tools you have. Hell, I never knew a lot of those tools and accessories even existed. I enjoy watching you work though!
yes that and TOT's ability !! well done again Tony
I wish he worked for me! lol
Your videos have ruined the rest of you tube for me. Thanks a lot, I mean it thank you very much. Well done!
Thank you!
Amazing work, keep it up.
that was AMAZING. how did u make the single bronze piece float and seal at the same time? that confused me.
The rest of RUclips ruined RUclips, This Old Tony merely avoided making his videos (nOT CLiCkBAiT) PRANK!!! (GonE WrONg) (GoNe SeXUaL) (CONfesSiOn) (NO DrAMa!)
For which I am extremely grateful, this channel remains a beacon of hope, not only that quality content still gets made, but that the communities this type of channel (Abom79, AvE, ClickSpring, Applied Science, GreatScott, etc) bring together are so healthy; they're supportive, inquisitive, accepting and there's no hatred in the comments. Really glad you guys are here. Thanks both viewers and creators!
Also Tony, if you're reading this, could you share your bronze recipe? I've tried it a dozen times and I keep getting brass.
@@CuthbertNibbles I keep getting ads for "RUclips TV" as if RUclips doesn't understand that if I wanted to watch TV I wouldn't be here in the first place.
I just sit in awe how one man has this advanced kit, skill, talent, and humor, despite doing it for a hobby. Love this dude.
That was so good on so many levels. TY!
i am blown away by a few things. how perfectly filmed and combined with humour your content is. and secondly how fucking underrated this channel is. im gonna spread out the love in switzerland at my college where im currently studying mechanical engineering! keep up the good fucking work mate well done
thanks HHK!
Cinematic masterpiece, Cannes film festival better watch out.
+Francis Barnett If I'm not invited I'll be bummed, for sure.
thought the same thing
Yeah, and it's still a better love story than Twilight.
@@worldmenders It's a better love story than Love Story.
Hands down one of the coolest videos on YT!
A pleasure to watch a master tool maker apply his craft, while listening to great music.
hhhhuhhh
I enjoyed the video and the humour! Thanks for the time and effort you have put in!
Sorry about your voice going out like that; Rough cutting stock like that can be tough on machinists. So glad to see you made the best of the situation and another fine video to boot!
I never knew that hot peppers are an ingredient in bronze. I learn something new with every video. Thanks ToT your the best!
The machinist humor with a slight international flair of AVE combined with the lets make it from bare stock of Clickspring, a winning combination! You Sir have earned yourself a new subscriber.
Mechanical poetry in motion - class act my dear Tony.
Been watching your channel for two days and now its my favourite. It's so satisfying watching your process of creativity and creation and the humor is right up my alley.
Thanks!
I enjoy your Ray Romano voice spitting dad jokes regardless but this particular vid was a breath of fresh air in its own right... Perfezione!
This video is worthy of a film festival¡
You are the "Panacea" to all that is the noise that tries to occupy my soul......the video and the music are mesmerizing.
Thank you,
David
Opera, algebra and alchemy in one video. Bravo!
I am a machinist myself from Ghana. This dude does tremendous stuffs it ease. I love that
All that work for a simple slot. It seems to me that the journey is your reward. Nice Video.
This Old Tony, your videos never disappoint.
OMG, the musical score!! Incredible. You are incredible.
Wonderful. Was just sitting on the couch, watching this on the big TV with Dolby Sound, and eventually even my wife and the 11 months Babygirl joined. So fascinating and calming... :)
Got yourself a new subscriber!
A real treat to see a craftsman at work. Thank's.
please never stop youtubing, this is pure gold, brass and steel. how do you find time for those great videos?? love your humor!
Man I've been binging on this like there is no tomorrow. I wanna be just like Tony when I grow up. Tony do you have a day job? How the hell did you learn all these skills? Twenty five million views? Start a school and make millions. Thanks so much.
Machining for the heart and soul, Oh My! Felt like I witnessed High Art...moving imagination to form and function through elegance. May be your best one yet Tony. Thank You are meager words....~PJ
+pjsalchemy Thanks PJ!
I’m not sure why, but I felt the need to shed a tear at how beautiful this is. I’ve really only seen his videos where he’s doing a voiceover. This is something else, something amazing.
I've never seen horizontal milling running this clean and smooth before. nice job
Hi Tony, just wanted to tell you that I love your channel. I am a retired Air Force Metals Technologist (Machinist, Welder, CNC Programmer), fancy title. You have great ideas and bring in humor in way that make me feel like I am back in uniform working in the old shop. Thank you for what you do.
This is the best mix of useful machining tips and entertainment I've ever seen! Man I laughed out so hard as you get use of your internal Opera steel cutter. I hope you got the patent ;) Many thanks for all the effort you put in your video's! Greetings from Germany.
Not sure if you do this for a living but you sure make things look easier, great ideas and design better than my local machine shop even
Skills man.... Skills!👌 nice job!
+Abom79 I kept thinking, "man, I wonder if he's been watching Abom's parking attachment series?" I guess this answers that question. BTW, I'm really loving that series also. It's great seeing all the different processes in play. Thanks for taking the time to put your own master skills out there for us.
+Abom79 You should see me on the dance floor.
Adam & Tony, You both are very talented.
thanks for the humour and beautiful work, old tony. good job
A good friend of mine recently came into possession of what is probably a 105 year old John Steptoe horizontal hand mill, which is pretty much the our great granddads version of what you're doing here. After about of month of cleaning and fixing, we made our first chips with it last night.
This stuff is so much fun!
This is mechanical engineering meets the visual Arts! This should be submitted for a much deserved award!
Besides adding this video to my "Best of RUclips" list, I am extremely amazed and impressed by the work setups.
I come back to watch this one every few months. The Opera Slice gets me every time.
Everything is better with a hot pepper in it, even a This Old Tony video. Great show!
I am speachless. The video is a work of art. Your machining work is top notch and your video editing is incredible. Been watching for 6 months.
Regular guy: I need this part for my machine, do you guy carry it ?
Shop: I don't think such thing exist .
-----------------------------------------------------------
This old Tony : I needed this part so I made it.
Abom79 made a parking attachment for his vertical head. It's definitely a channel you should subscribe to as it's very interesting all the things he's worked on over the years
If I believe this channel, 50% of metalwork is to make parts for metalwork machines.
I can’t blame him. I program tools for programmers.
I stumbled upon your channel by accident and have been stuck here since. I have never been around a milling machine, but now want to take it up. I won't, but I want to. You make it look as though anyone could buy a lathe and milling machine and be creating metal art in mins. This is a gift Tony. Your humor is outstanding. Keep putting them out and I'll be here like Malcolm McDowell, Clockwork Orange
I've watched a lot of machining videos and this was possibly the best I've seen....well done sir!
+jfpinkston Thank you jf!
Another great video Old Tony. Stay at it Tony, it shows the true genius of your diversified machine shop fabrication background. Thank you
Now I finally understand the art of... Art. Your videos are both funny and beautiful to watch, I love it. Best RUclips channel ever!
Thanks!
OMG I busted a gut! first the opera singing...then a chili pepper seriously?! HAHA! I truly enjoyed this, and your attention to detail is awesome
I love your videos. You are one of the guys I get most excited about when a new video is posted.
+larsmark Thank you!
Wow outstanding work Tony.
I keep recommending your videos to my friends so much, they must think I'm all nuts and bolts...
I watched this like a reflective Clark Griswold up in the loft watching old Xmas home movies in Nat. Lampoons Xmas Vacation. Blinding piece of workmanship and video editing. Tony - you've saved the internet!
And I forgot to say - Wow! Just wow.... The support, came out excellent.
+BasementShopGuy DITTO!!
it 2 mm out.. nooooooo... my nightmare
hi, I'm french, why he have writen "end" in french : Fin ?
Hhgc Ertyuu je me suis dis la même chose
Hhgc Ertyuu Because he can. The end is the end, regardless of the language it's written in.
Just watched this one again for the fifth time. Video poetry. So therapeutic. 😌
viewer: how many sets of skill does tony have?
tony: YES
Amen 🙂
How come THIS OLD TONY channel is the only thing I watch each and every day for the past year or so ?. It combines exquisite taste, knowledge, expertise, lots of laughs and a very good company.
Love !. PABLO FROM ARGENTINA !.
Genius.... the work was excellent but the video was so well put together
Excellent and weirdly calming. You are an artist TOT, well a highly skilled engineer.
Really nice work with attention to detail, not seen often nowadays... A pleasure to watch thank you for sharing.
ohh Mr.Tony....a true classic. how can i missed this years ago. you are like my old shopmaster i can feel the love you put into your work. thanks alot for this great content :)
This video was absolutely Soothing to my mind, I could watch this over and over.
I know this is 6 years ago. But the fact he made this is absolutely impressive
Tony....this is one of the best videos I think I have ever seen!! Great production, super build, just great shot of machining and your humor is fantastic....ATB
+outsidescrewball Thanks Chuck, means a lot.
+This Old Tony
Hey Chuck, I totally agree!
Still the best Tony video of all times. I watch it from time to time. Superb machining skills mixed with great music. Drops my blood pressure by 20!
Beautiful piece, and excellent music! master!
Thanks!
I don’t recall the last time I enjoyed a video like that one. I used to wonder why my Dad would ask me to leave his “shop” when ever he was working on something very tedious. 53 yrs later and watching my you-tube hero’s and wishing I had a lathe & Bridgeport . . . . . . . . I understand. I wonder what he’d say if he saw a DRO and all the other digital tooling. Thanks Tony, I sure enjoyed it
I felt under dressed watching this.
Me too so I pulled out my old ` Cow gown` from my days working in the machine shop at Lucas
Certainly a blacktie affair.
You speak for yourself there mate.
I feel perfectly dressed for this being entirely naked!
You need your dressing tool then. Make sure to test your new abrasive surface with some W1
byrysh Make sure to wear your safety tie
Joyful watching that Swiss masterpiece come back to life, and the homemade Arbor steady was a bonus. 15 years milling on a Universal Huron mill for a living doing weapons manufacture, brought it all back to me...Thanks.
I'm a big fan of the novel ways you cut up your stock :P
it's always nice to revisit the classics once in a while. Bravo, Tony.
You're brilliant!
Delicious blend of peaceful piano and precision machining! A pleasure to watch good sir!
1:57 did anyone realize that 1.6530 is 42 mm ? This swiss guys have some scifi culture ;-)
As soon as i saw the odd measurements i thought it had to be something simple in metric
Also, distance between centers, 4.41" - 1.653" = 2.757" = 70.0mm
@@craigmandall9420 everything is simple in metric
Action speaks louder than words !
10/10 🏅
Awesome! And great voice.
This is one of the first machining video i ever watched. When i first watched it, i didn’t even know what machining was, had never really questioned “how” things are made. Well, I just pulled my first bridgeport into the garage a few weeks ago, alongside my southbend heavy 10, 9a, 11” O series, Leblond… Let’s just say “fleet” of small lathes. (I have a problem with lathes) Coming back to watch it again for nostalgias sake, i realize that finding this video, and others like it, was one of the best things to ever happen to me. Behind marrying my wife of course, and adopting my dog.
Beautiful piece of work, excellent video, perfectly wry wit, a true masterpiece!
+MrWalkerklondyke Thanks!
I couldn't agree more! And I'm truly impressed by your workmanship :)
I'm not halfway through watching, and I have to say.. this is fascinating to me... Precision machinery is just so intriguing. This comes from my former Air Force experience. For 8 1/2 years I was an Avionics Instrument Specialist, and that is all about precision measurement. KUDOS for carrying the flame!
1st-rate machining skills here, a joy to watch.
OMG..... I can't put into words how amazing that French art piece was, it was just stock removal and precision and powerful but also it made me feel like a child again. 😢 I cried like a little kid when you added that groove on the inside of that finished hole but then I seen the oil come up through and it was like I found my innocence again.... 😭😭😭 Thank you ThisOldTony..... You made me feel alive again, Magnifique. 😭👏🏻😭👏🏻😭👏🏻😭👏🏻😭👏🏻😭👏🏻😭👏🏻😭👏🏻😭👏🏻😭👏🏻😭👏🏻😭👏🏻 After watching this, non je ne regrete rien¡! 😭👏🏻❤️
At first I didn't like that little mill, now I realize it's a lot stiffer and more capable than my bridgeport!
Same here.
The Metal Butcher you do not know how to run a Bridgeport then I have four bridgeport's wouldn't trade them for the world let's see you Mill something 62 in Long how many set-ups would you do with this Mill would be in the 9 to 10 setups ,???my Bridgeport 48 inch table with a 30-inch cut!! do the math that's 2 and 1/2 setups and hold a .001 tolerance over that cut thank you but no is a cute Mill
You sir, are a master tradesman. That was a pleasure to watch! The quality of machine and workmanship, the attention to detail and some old-school techniques not often used now days was a real treat to see. Executed so we'll. My hat off to you.
Great job as always tony keep up the good work love the editing..
Exceptional manual machining video. Thanks.
Wonderfully well-made video. And a wonderfully well-made piece of equipment, too. :)
Thanks!
This is the most emotionally attached machining video I have ever seen.
Your humor is exceeded only by your abilities.
Or, is it the other way around?
Quite possibly the best milling video on RUclips, this is the reason I want a horizontal mill.
2:10
Wow, I can't stop laughing!
Such a beautiful video. Bravo Sir!!
So relaxing -- wonderful!
Thanks Blaise!
This channel alone has made me consider changing my profession.
TOP VIDEO! Difficult precision machining , Humor. and not word said to much!