DON'T LET A SMALL HOOP HOLD YOU BACK FROM ANY DESIGN! Wilcom Hatch Embroidery Software makes multi hooping quick and easy - so you can stitch out any design!!
Thank you for another fabulous video which took the mystery out of designing a multi-hooped design. If you have time, in the future, would you be able to show us how to actually hoop the material so that the second hooping lines up exactly where it should (some of us have single needle machines and no snowmen)? I also noticed that the videos are a lot clearer in 1080 HD. There is a big difference between 720 and 1080 in the clarity of all the small buttons on the software when playing back. This is only a suggestion and if it's not to much extra work for you. Best regards.
I just did my first multi hooping. I also have embird and I have my designs in my documents under embroidery files. When I try to open as per video my files do not show up. But they are there as pes files. What do I need to do to make them show to bring into hatch? Do I need to change a setting in iconizer? Also they show up with a black background. I will show picture when I stitch out in group.
are you talking about multihooping or are you talking about seeing your designs on your computer? If you are working in Hatch, I have two videos on multihooping being released today.
Hey please help, I am not sure if hatch automatically saves my designs with the files centered or if my machine does it. I have an brother innovis F440E. I tried to look through settings however cannot identify what is centering my design on my embroidery machine rather then leaving it alone as it looks in hatch. (READ COMMENT I ADDED INFO)
When I open the file in hatch from "INSERT ARTWORK" in a new design, it shows it centered in the hoop, even when i set the hoop to manual and not automatic centering. Does this mean Hatch is automatically centering my designs when saving them?
![Coheed and Cambria - Searching for Tomorrow [Official Video]](http://i.ytimg.com/vi/hDsYGLbmadg/mqdefault.jpg)
DON'T LET A SMALL HOOP HOLD YOU BACK FROM ANY DESIGN! Wilcom Hatch Embroidery Software makes multi hooping quick and easy - so you can stitch out any design!!
Thank you for another fabulous video which took the mystery out of designing a multi-hooped design. If you have time, in the future, would you be able to show us how to actually hoop the material so that the second hooping lines up exactly where it should (some of us have single needle machines and no snowmen)? I also noticed that the videos are a lot clearer in 1080 HD. There is a big difference between 720 and 1080 in the clarity of all the small buttons on the software when playing back. This is only a suggestion and if it's not to much extra work for you. Best regards.
Thanks for this I spent ages years ago figuring this out. But I got there in the end. Nice to see your easy to follow explanations . Thanks Sue
i am glad that you have figured it out - multi hooping can be difficult, but worth it in the end!
I've just downloaded Hatch based on this video and am going to try and the free trial. Thanks!
Wonderful. Keep it up Sue.
😀
Love the video! I however have Pe design 10 and have not even come close to figuring out multi hooping! I’m seriously considering new software. 😞
you should try Hatch for free for 30 days and see what you think.
This looks fun, thanks ❣️
😀
How do I use jumbo 14x14 with hatch?
I don"t see the brother se625 machine in hatch? Can I select any brother machine and use anyone with 100x100?
Did you ever figure this out??
thanks again.
Hello! To do this do I need to purchase hatch full $900 version or will the $150 one be fine?
you can only digitize with the full version!
I just did my first multi hooping. I also have embird and I have my designs in my documents under embroidery files. When I try to open as per video my files do not show up. But they are there as pes files. What do I need to do to make them show to bring into hatch? Do I need to change a setting in iconizer? Also they show up with a black background. I will show picture when I stitch out in group.
are you talking about multihooping or are you talking about seeing your designs on your computer? If you are working in Hatch, I have two videos on multihooping being released today.
How would I do applique designs with multihooping?
could I do this with a brother lb5000? it's limited to a 4x4 area
also are there any cheaper programs that do this? i'm not a business and can't fork out $800 for a program
What software are you using?
I can”t do it with hatch enbroidery 2! sad
Not sad, you can still do multihooping in Hatch Embroidery 2. You need to have the digitizing level of the software.
Hey please help, I am not sure if hatch automatically saves my designs with the files centered or if my machine does it. I have an brother innovis F440E. I tried to look through settings however cannot identify what is centering my design on my embroidery machine rather then leaving it alone as it looks in hatch. (READ COMMENT I ADDED INFO)
When I open the file in hatch from "INSERT ARTWORK" in a new design, it shows it centered in the hoop, even when i set the hoop to manual and not automatic centering. Does this mean Hatch is automatically centering my designs when saving them?