When installing the voltage reducer, I would recommend that you use a 48V relay that utilizes a wire from the ignition switch that will trigger the relay only when the ignition is on. This will prevent the voltage reducer from draining the battery on a constant basis. If you dont drive the cart for several days then you are likely to get in the cart and go nowhere because the battery is dead. Make sure that you get in the habit of putting the cart on the charger the night before you are going to use the cart.
How do you keep the brights on for the headlights? I can pull back on the lever and the brights come on, but immediately turn off when I am not holding the lever back. I want a way to turn on brights and keep them on!
Bought the nokins light kit with the brake pad instead of the brake switch. Instructions are not complete with regard to how to hook up the brake lights. Turn signals and tail lights work fine, but no brake lights.
no es lo mismo para los carros de gasolina. No necesitas el convertidor. Para carros eléctricos se necesita convertidor. Cableará como se indica en las instrucciones.
Thanks much
Great video! The key connection clamp was what had me stumped. THANKS!
You're welcome. Glad it helped.
Thanks for the video, installing tomorrow
Thanks for video. Was thinking of buying this kit but was nervous about the install
You're welcome if you have any questions feel free to comment and ask. Thanks for watching.
When installing the voltage reducer, I would recommend that you use a 48V relay that utilizes a wire from the ignition switch that will trigger the relay only when the ignition is on. This will prevent the voltage reducer from draining the battery on a constant basis. If you dont drive the cart for several days then you are likely to get in the cart and go nowhere because the battery is dead.
Make sure that you get in the habit of putting the cart on the charger the night before you are going to use the cart.
The ignition already has a relay built in! Thanks for your input! That is so true! Some kits don't have that!
🔥🔥🔥video! Light kit looks pretty dope.
Appreciate it!!
Il definitely watch this again when I install
Appreciate the support!
Great video thanks!
How do you keep the brights on for the headlights? I can pull back on the lever and the brights come on, but immediately turn off when I am not holding the lever back. I want a way to turn on brights and keep them on!
Holy fuckin' God...I've watched 42 times and I can't keep up! (thank God I can pause it, but I'm sot sure about this)
Did you have success installing?
Bought the nokins light kit with the brake pad instead of the brake switch. Instructions are not complete with regard to how to hook up the brake lights. Turn signals and tail lights work fine, but no brake lights.
My taillights goes out when I switch to high beam. Any suggestions?
I completed install .. everything works but both headlights are blinking constantly .. any advise?
can you send me a video to bmcgolfcarts@gmail.com
QUESTION! What in the heck does that 3 position switch do? Installed it in the dash but can’t figure it out!
Its just another headlight switch. Off/running lights/low/highbeam
@@CartPerformance ohh, weird. Appreciate it!
Will this work the same on a 6x8v set up?
yes. Comes with 48 to 12 volt converter
Y para el de gasolina es la misma instalación
41 is prett quick
Hay que utilizar el convertidor
O se puede conectar directo sin el convertidor
no es lo mismo para los carros de gasolina. No necesitas el convertidor. Para carros eléctricos se necesita convertidor. Cableará como se indica en las instrucciones.
Great video thanks!